Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.

Posicionamento estratégico : o caso da Union Carbide do Brasil

Análise das possíveis estratégias a serem adotadas pela Union Carbide do Brasil. Parte da premissa da decisão da empresa em não expandir seus negócios no Brasil. Considera que a estratégia de posicionamento é a mais adequada levando-se em conta as características da empresa, do mercado e as opções possíveis

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Estudo da influência da temperatura de brasagem nas uniões zircônia/aço inox 304 utilizando metalização mecânica

Metal-Ceramic (M/C) Zirconia-stainless steel interfaces have been processed through brazing techniques due to the excellent combination of properties such as high temperature stability, high corrosion resistance and good mechanical properties. However, some M/C interfaces show some defects, like porosity and cracks results in the degradation of the interfaces, leading even to its total rupture. Most of time, those defects are associated with an improper brazing parameters selection to the M/C system. In this work, ZrO2 Y-TZP and ZrO2 Mg - PSZ were joint with the stainless steel grade 304 by brazing using a eutectic silver-copper (Ag28Cu) interlayer alloy with different thermal cycles. Ceramic surfaces were previous mechanically metallized with titanium to improve adhesion of the system. The effect of temperature on the M/C interface was studied. SEM-EDS and 3 point flexural bend test were performed to evaluate morphology, chemical composition and mechanical resistance of the M/C interfaces. Lower thermal cycle temperatures produced better results of mechanical resistance, and more regular/ homogeneous reaction layers between braze alloy and metal-ceramic surfaces. Also was proved the AgCu braze alloy activation in situ by titanium

Orientation and external morphology of burrows of the mangrove crab Ucides cordatus (Crustacea: Brachyura: Ucididae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology of the eggs and larvae of Cyphomyrmex transversus Emery (Formicidae: Myrmicinae: Attini) and a note on the relationship with its symbiotic fungus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The larval morphology and nest habits of Trypoxylon (Trypargilum) rogenhoferi Kohl 1884 (Insecta: Hymenoptera: Crabronidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

External Morphology of the Immatures of Polybia paulista (Hymenoptera: Vespidae)

The immatures of Polybia paulista Ihering were described using light and scanning electron microscopy and the results are compared with previous descriptions within the same or related wasps. This study is based on 2 whole nests collected in the municipality of Rio Claro, São Paulo, in Brazil. We have detected the existence of 5 larval instars. The main morphological alterations over development occur in the relative size of structures, yet certain structures appear with subsequent instars and become more evident later in development: increasing density in the number of body spines and papillae; the appearance of body setae in fifth-instar larvae; opening of spiracles upon second-instar larvae; 2 body shapes in fifth-instar larvae; the appearance of a lateral tooth on the mandibles of fourth instar; presence of spines on the maxillae of fifth-instar larvae; altered shape of galea and palps upon third-instar larvae from a cluster of sensilla to a conical elevation; and the appearance of spines on postmentum upon fourth-instar larvae. This way, the present study presents a detailed description of the immatures of P. paulista, and we hope the presented information can be useful to morphological, taxonomic, and phylogenetic studies.

Pathogenicity, colony morphology and diversity of isolates of Guignardia citricarpa and G-mangiferae isolated from Citrus spp.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of chlorine added to drinking water during the preslaughter feed withdrawal on microbiology and morphology of the broiler gastrointestinal tract

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ultrastructural morphology and morphometry of the normal corneal endothelium of adult crossbred pig

O endotélio corneal é uma monocamada de células poligonais. A integridade e saúde dessa camada são essenciais para a manutenção da transparência corneal normal. Este estudo reportou pela primeira vez, de forma detalhada, a morfologia ultra-estrutural e a morfometria do endotélio corneal de suínos adultos mestiços à microscopia eletrônica de varredura (MEV). A superfície endothelial corneal apresentou um padrão regular de células poligonais, com predomínio da forma hexagonal e de bordas celulares nítidas. O núcleo foi observado como protuberância arredondada no centro da célula. Também foram observados os cílios (2-4) em apenas algumas células da região periférica da córnea, as aberturas das vesículas pinocitóticas na proximidade dos cílios, as microvilosidades, as varas da borda e as bordas celulares em formato de zigzag. A área celular média foi significativamente maior (P<0,05) no centro da córnea do que na periferia, com um coeficiente de variação menor no centro da córnea. A densidade celular média foi significativamente maior na periferia (P<0,05) e 43,9% maior que os dados reportados por outros autores na microscopia especular, o que demonstra o efeito da retração celular durante o processamento das amostras. O valor médio do número de lados das células (pleomorfismo) foi de 5,9, o que evidencia um predomínio do formato hexagonal. A percentagem de células hexagonais foi significativamente maior no centro (P<0,001). Os parâmetros obtidos nesta pesquisa servirão de base para estudos futuros sobre o efeito de medicamentos, cirurgias intracamerulares ou soluções para armazenamento de córneas para transplantes no endotélio corneal do suíno.

Morphology of glandular stomach (Ventriculus glandularis) and muscular stomach (Ventriculus muscularis) of the partrigde Rhynchotus rufescens

Vinte perdizes Rhynchotus rufescens adultas foram utilizadas para estudo morfológico do proventrículo e ventrículo gástricos da perdiz Rhynchotus rufescens. Os materiais foram coletados e os comprimentos do proventrículo e do ventrículo gástricos foram avaliados. Para o estudo histológico, fragmentos dos estômagos foram corados pelas técnicas de ácido periódico de Schiff (PAS) e tricromo de Masson. O proventrículo gástrico é alongado, com formato fusiforme direcionado no sentido craniocaudalmente e para a esquerda, e apresenta um comprimento médio 3,20cm nas fêmeas e 3,65cm nos machos. Histologicamente, o proventrículo gástrico é composto por vários lobos e glândulas. A mucosa é formada por epitélio cúbico, sendo bastante pregueada. O ventrículo gástrico tem o formato de uma lente biconvexa, com comprimento médio de 4,30cm nas fêmeas e 4,35cm nos machos. A mucosa é formada por pregas revestidas por células cilíndricas e pelo muco formador da cutícula. Há criptas na base das pregas. em seguida, há uma lâmina própria e uma espessa camada muscular lisa, que se encontra direcionada de acordo com o formato do ventrículo gástrico. A serosa é constituída por uma densa porção de tecido conjuntivo, entremeado por algumas células musculares lisas.

Morphology of beak and tongue of partrigde Rhynchotus rufescens

Vinte perdizes Rhynchotus rufescens foram utilizadas para estudar a morfologia do bico e da língua. Os comprimentos do bico e da língua foram avaliados, e secções histológicas foram coradas com Hematoxilina-Eosina (HE), ácido periódico de Schiff (PAS) e tricromo de Masson, posteriormente analisadas e descritas. O bico da perdiz em ambos os sexos são curvos, duros e com uma extremidade pontiaguda tendo em média de 4,90cm de comprimento para as fêmeas e 4,80 para os machos. A língua é caracterizada por um formato triangular e possui em média 1cm de comprimento para ambos os sexos, sendo sua extremidade pontiaguda. A organização histológica da língua apresenta epitélio estratificado queratinizado com papilas filiformes em toda a superfície, glândulas mucosas com ductos que se projetam na superfície epitelial e cartilagem hialina em todo o comprimento, localizada sobre a musculatura esquelética, a qual é orientada em várias direções.

Morphometry and morphology of nucleus of the Sertoli and interstitial cells of the tambaqui Colossoma macropomum (Cuvier, 1881) (Pisces: Characidae) during the reproductive cycle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)