Grass-endophyte coevolution and ploidy levels in fescues

ABSTRACT Fescues consist of wild and cultivated grasses that have adapted to a wide range of environmental conditions. They are an excellent model species for evolutionary ecology studies that investigate symbiosis and polyploidization and their effects on plant performance. First, they are frequently infected with symbiotic endophytic fungi known to affect a plant’s ability to cope with biotic and abiotic environmental factors. Second, fescue species have been reported to have substantial intraspecific variation in their ploidy level and morphology. In my thesis, I examined large-scale generalizations for frequency of polyploidy and endophyte infections and their effects on plant morphology. As a model species, I selected red (Festuca rubra) and viviparous sheep’s (F. vivipara) fescues. They are closely related, but they differ in terms of distribution and endophyte infection frequency. I investigated the biogeographic pattern and population biology of 29 red and 12 viviparous sheep’s fescue populations across ≈300 latitudes in Europe (400-690 N). To examine plant ploidy levels, I implemented time- and cost-efficient plate-based high throughput flow cytometric analysis. This efficient procedure enabled me to analyze over 1000 red fescue individuals. I found three ploidy levels among them: overall 84 %, 9 % and 7 % of the red fescue plants were hexaploid, tetraploid and octoploid, respectively. However, all viviparous sheep’s fescue plants were tetraploid. Ploidy level of red fescue appeared to some extent follow gradients in latitude and primary production as suggested by previous studies, but these results could be explained better by taking the sampling design and local adaptation into account. Three Spanish populations were mostly tetraploids and one high elevation population in northernmost Finland (Halti) was octoploid, while most other populations (25 sites) were dominated by hexaploids. Endophyte infection frequencies of wild fescue populations varied from 0 to 81 % in red fescue populations and from 0 to 30 % in viviparous sheep’s fescue populations. No gradients with latitude or primary production of the sites were detected. As taxonomy of red fescues is somewhat unclear, I also studied morphology, ploidy variation and endophyte status of proposed subspecies of European red fescues. Contrary to previous literature, different ploidy levels occurred in the same subspecies. In addition to wild fescues, I also used two agronomically important cultivars of meadow and tall fescue (Schedonorus phoenix and S. pratensis). As grass-legume mixtures have an agronomic advantage over monocultures in meadows, I carried out a mixture/competition experiment with fescues and red clover to find that species composition, nutrient availability and endophyte status together determined the total biomass yield that was higher in mixtures compared to monocultures. The results of this thesis demonstrate the importance of local biotic and abiotic factors such as grazing gradients and habitat types, rather than suggested general global geographical or environmental factors on grass polyploidization or its association with symbiotic endophytic fungi. I conclude that variation in endophyte infection frequencies and ploidy levels of wild fescues support the geographic mosaic theory of coevolution. Historical incidents, e.g., glaciation and present local factors, rather than ploidy or endophyte status, determine fescue morphology.

Ekologisuuden merkitys julkisissa hankinnoissa

Ilmastonmuutos, ympäristön saastuminen sekä luonnonvarojen ehtyminen lukeutuvat voimakkaimpiin taustalla vaikuttaviin tekijöihin, joiden vuoksi ympäristönäkökohdat ovat nousseet yhä voimakkaammin esille julkisissa hankinnoissa. Julkisten hankintojen tekijät ovat velvoitettuja huomioimaan talouden ohella myös ympäristönäkökohdat. Suuren ostovolyyminsa vuoksi julkinen sektori voi toimia suunnannäyttäjänä ympäristöä säästävien hankintojen toteuttajana. Tämä Pro gradu –tutkielma kartoittaa ekologisten hankintojen merkitystä suomalaisissa kunnissa vuonna 2016. Tavoitteena on selvittää mitä julkisten hankintojen ekologisuus kunnille merkitsee, miten ekologisuus näkyy hankintaprosessissa sekä mitkä tekijät ovat ekologisten hankintojen esteenä ja mitkä tekijät puolestaan kannustavat kuntia tekemään ekologisia hankintoja. Tutkimuksen tuloksena selvisi, että kunnat suhtautuvat ekologisuuteen hankinnoissa varsin positiivisesti ja ennen kaikkea ympäristönäkökohdat koetaan tärkeänä osana hankintoja. Ympäristönäkökohtien huomioiminen hankintaprosessissa koetaan kuitenkin melko vaikeaksi. Erityisesti tiedon puute, hinta ja taloudelliset resurssit vaikeuttavat ekologisten hankintojen toteutusta. Positiivisesti ympäristönäkökohtien huomioimiseen hankinnoissa puolestaan vaikuttavat henkilöstön osaaminen, taloudellisuus ja lainsäädäntö.

Confocal and two-photon microscopy : image enhancement /

Confocal and two-photon microcopy have become essential tools in biological research and today many investigations are not possible without their help. The valuable advantage that these two techniques offer is the ability of optical sectioning. Optical sectioning makes it possible to obtain 3D visuahzation of the structiu-es, and hence, valuable information of the structural relationships, the geometrical, and the morphological aspects of the specimen. The achievable lateral and axial resolutions by confocal and two-photon microscopy, similar to other optical imaging systems, are both defined by the diffraction theorem. Any aberration and imperfection present during the imaging results in broadening of the calculated theoretical resolution, blurring, geometrical distortions in the acquired images that interfere with the analysis of the structures, and lower the collected fluorescence from the specimen. The aberrations may have different causes and they can be classified by their sources such as specimen-induced aberrations, optics-induced aberrations, illumination aberrations, and misalignment aberrations. This thesis presents an investigation and study of image enhancement. The goal of this thesis was approached in two different directions. Initially, we investigated the sources of the imperfections. We propose methods to eliminate or minimize aberrations introduced during the image acquisition by optimizing the acquisition conditions. The impact on the resolution as a result of using a coverslip the thickness of which is mismatched with the one that the objective lens is designed for was shown and a novel technique was introduced in order to define the proper value on the correction collar of the lens. The amoimt of spherical aberration with regard to t he numerical aperture of the objective lens was investigated and it was shown that, based on the purpose of our imaging tasks, different numerical apertures must be used. The deformed beam cross section of the single-photon excitation source was corrected and the enhancement of the resolution and image quaUty was shown. Furthermore, the dependency of the scattered light on the excitation wavelength was shown empirically. In the second part, we continued the study of the image enhancement process by deconvolution techniques. Although deconvolution algorithms are used widely to improve the quality of the images, how well a deconvolution algorithm responds highly depends on the point spread function (PSF) of the imaging system applied to the algorithm and the level of its accuracy. We investigated approaches that can be done in order to obtain more precise PSF. Novel methods to improve the pattern of the PSF and reduce the noise are proposed. Furthermore, multiple soiu'ces to extract the PSFs of the imaging system are introduced and the empirical deconvolution results by using each of these PSFs are compared together. The results confirm that a greater improvement attained by applying the in situ PSF during the deconvolution process.

The effects of temperature on nickel tocicity in goldfish (carassius auratus L.)

Although it is widely assumed that temperature affects pollutant toxicity, few studies have actually investigated this relationship. Moreover, such research as has been done has involved constant temperatures; circumstances which are rarely, if ever, actually experienced by north temperate, littoral zone cyprinid species. To investigate the effects of temperature regime on nickel toxicity in goldfish (Carassius auratus L.), 96- and 240-h LCSO values for the heavy metal pollutant, nickel (NiCI2.6H20), were initially determined at 2DoC (22.8 mg/L and 14.7 mg/L in artificially softened water). Constant temperature bioassays at 10°C, 20°C and 30°C were conducted at each of 0, 240-h and 96-h LCSO nickel concentrations for 240 hours. In order to determine the effects of temperature variation during nickel exposure it was imperative that the effects of a single temperature change be investigated before addressing more complex regimes. Single temperature changes of + 10°C or -10°C were imposed at rates of 2°C/h following exposures of between 24 hand 216 h. The effects of a single temperature change on mortality, and duration of toxicant exposure at high and low temperatures were evaluated. The effects of fluctuating temperatures during exposure were investigated through two regimes. The first set of bioassays imposed a sinewave diurnal cycle temperature (20.±.1DOC) throughout the 10 day exposure to 240-h LeSO Ni. The second set of investigations approximated cyprinid movement through the littoral zone by imposing directionally random temperature changes (±2°C at 2-h intervals), between extremes of 10° and 30°C, at 240-h LC50 Ni. Body size (i.e., total length, fork length, and weight) and exposure time were recorded for all fish mortalities. Cumulative mortality curves under constant temperature regimes indicated significantly higher mortality as temperature and nickel concentration were increased. At 1DOC no significant differences in mortality curves were evident in relation to low and high nickel test concentrations (Le., 16 mg/L and 20 mg/L). However at 20°C and 30°C significantly higher mortality was experienced in animals exposed to 20 mg/L Ni. Mortality at constant 10°C was significantly lower than at 30°C with 16 mg/L and was significantly loWer than each of 2DoC and 39°C tanks at 20 mg/L Ni exposure. A single temperature shift from 20°C to 1DoC resulted in a significant decrease in mortality rate and conversely, a single temperature shift from 20°C to 30°C resulted in a significant increase in mortality rate. Rates of mortality recorded during these single temperature shift assays were significantly different from mortality rates obtained under constant temperature assay conditions. Increased Ni exposure duration at higher temperatures resulted in highest mortality. Diurnally cycling temperature bioassays produced cumulative mortality curves approximating constant 20°C curves, with increased mortality evident after peaks in the temperature cycle. Randomly fluctuating temperature regime mortality curves also resembled constant 20°C tanks with mortalities after high temperature exposures (25°C - 30°C). Some test animals survived in all assays with the exception of the 30°C assays, with highest survival associated with low temperature and low Ni concentration. Post-exposure mortality occurred most frequently in individuals which had experienced high Ni concentrations and high temperatures during assays. Additional temperature stress imposed 2 - 12 weeks post exposure resulted in a single death out of 116 individuals suggesting that survivors are capable of surviving subsequent temperature stresses. These investigations suggest that temperature significantly and markedly affects acute nickel toxicity under both constant and fluctuating temperature regimes and plays a role in post exposure mortality and subsequent stress response.

Magnetic and transport properties of (Ba1-xKx)Fe2As2

Single crystals of (Bal - xKx)Fe2As2 were prepared using the Sn flux method. Two heating methods were used to prepare the single crystals: the slow heating and rapid heating methods. It was found that the single crystals grown using the slow heating method were not superconducting due to a significant loss of potassium. When the rapid heating method was used, the single crystals were observed to be superconducting with the desired potassium concentration. The energy dispersive X-ray spectroscopy analysis indicated the presence of multiple phases in the single crystals. Using single crystal X-ray diffraction, the crystal structure of the single crystals was found to be 14/mmm tetragonal at room temperature. The magnetic measurements on the single crystals indicated the presence of multiple phases and magnetic impurities.

Global migration : patriarchy, propoganda and the well- being of women and children

This critical analysis explores the conflicted position of women as ''trailing spouses" and the effects on families who relocate globally under the auspices of a multinational corporation, by utilizing a discursive analysis of two contemporary films and available literature. Current portrayals of women and children in contemporary media provide emotional yet conflicting images of the perfect woman, wife, mother, child and family. The basic tenets of a North American patriarchal economic system are being televised around the world. Technological advancements have made it possible to advertise political agendas on a global television screen. Much of what we see is propaganda couched in films and advertisements that are designed to romantic~e the practice of deriving profits from the unpaid labor of woman and invisibility of children and child rearing. I intend to show that the materiality of trailing a spouse globally conflicts with these romanticized images and supports feminist literature that asserts the notion that mothers and children are oppressed and managed for the benefit of capital.

Analyzing the learning of the taking personal and social responsibility model within a new physical education undergraduate degree program in El Salvador

EI Salvador presents an unfortunate history that includes a military regime and a civil war that together created a legacy of violence in which the country still struggle nowadays. Salud Escolar Integral (SEI) was created in 2005 as a program to combat youth violence throughout the re-formulation of physical education (PE) classes in public schools, promoting life skills learning that supports the resolution of conflicts with nonviolent ways. In 2007, SEI supported the creation of a physical e~ucation teacher education (PETE) degree at the Universidad Pedag6gica de EI Salvador (UPES), having the goal to assist pre-service teachers with a better understanding of humanistic principles. The present research analyzed if after attending all three years ofUPES PETE program, students presented high self-perception levels of competence and confidence related to attitude, skills and knowledge to teach PE within humanistic principles. Taking Personal and Social Responsibility (TPSR) was the theoretical framework used to analyze the development of humanistic principles. The study had a mixed-method longitudinal design that included questionnaires, reflection templates and interviews. In conclusion, although it is suggested that UPES should provide better support for the development of the teaching principles of empowering students and transfer learning, most of the humanistic principles were highly promoted by the program. At last, it is suggested that future research should track teachers' progress while teaching in schools, in order to analyze if the theory of promoting humanistic principles have also become a daily practice.

Locating home : the diverse experiences of recent newcomer youth and first generation youth within Ontario's education system

This study has found that youth who or whose parents had left their home country for fear-based reasons were less involved within their school and wider community than youth who left or whose parents left for reasons concerning their social mobility. Many existing studies focus on the challenges newcomer youth experience within the education system (see Anisef, Brown, Phythian, & Sweet, 2010), however through the use of qualitative methodologies this study expanded on the current literature by further examining why it is some youth are successful in overcoming such challenges, while others are not. This study supported what has been demonstrated in the literature regarding challenges faced by newcomer youth and resources to address such challenges. Despite challenges experienced within the education system, youth planned to complete secondary school and attend a postsecondary institution. However, not all youth anticipated remaining in Canada upon completion of their education, with youth or youth whose parents left their home country for fear-based reasons frequently discussing the possibility of returning to their or their parents' home country. Thus, perhaps these youth were less involved within their school, as their goal was not necessarily to establish or maintain connections within their community as they may have viewed residing in Canada as temporary. This finding has important implications, as there are benefits to involvement in extracurricular activities, which may assist youth in overcoming challenges encountered within the education system. Therefore, it would seem that youth who had or whose parents had left their home country for reasons concerning their social mobility may have be at an advantage within the education system with respect to their involvement in school. Perhaps then this differential involvement may at least partially explain why it is some newcomer youth are able to overcome challenges they experience in the education system, while others are not. Both policy and theoretical implications are discussed.

Passive Solar Building Design Using Genetic Programming

Passive solar building design is the process of designing a building while considering sunlight exposure for receiving heat in winter and rejecting heat in summer. The main goal of a passive solar building design is to remove or reduce the need of mechanical and electrical systems for cooling and heating, and therefore saving energy costs and reducing environmental impact. This research will use evolutionary computation to design passive solar buildings. Evolutionary design is used in many research projects to build 3D models for structures automatically. In this research, we use a mixture of split grammar and string-rewriting for generating new 3D structures. To evaluate energy costs, the EnergyPlus system is used. This is a comprehensive building energy simulation system, which will be used alongside the genetic programming system. In addition, genetic programming will also consider other design and geometry characteristics of the building as search objectives, for example, window placement, building shape, size, and complexity. In passive solar designs, reducing energy that is needed for cooling and heating are two objectives of interest. Experiments show that smaller buildings with no windows and skylights are the most energy efficient models. Window heat gain is another objective used to encourage models to have windows. In addition, window and volume based objectives are tried. To examine the impact of environment on designs, experiments are run on five different geographic locations. Also, both single floor models and multi-floor models are examined in this research. According to the experiments, solutions from the experiments were consistent with respect to materials, sizes, and appearance, and satisfied problem constraints in all instances.

Niagara River (Ontario) Remedial Action Plan fonds, 1984-1997, n.d.

The Niagara River Remedial Action Plan was part of an initiative to restore the integrity of the Great Lakes Basin ecosystem. In 1972, the Great Lakes Water Quality Agreement was signed by both Canada and the United States to demonstrate their commitment to protecting this valuable resource. An amendment in 1987 stipulated that Remedial Action Plans (RAPs) be implemented in 43 ecologically compromised areas known as Areas of Concern. The Niagara River was designated as one of these areas by federal and provincial governments and the International Joint Commission, an independent and binational organization that deals with issues concerning the use and quality of boundary waters between Canada and the United States. Although the affected area included parts of both the Canadian and American side of the river, Remedial Action Plans were developed separately in both Canada and the United States. The Niagara River (Ontario) RAP is a three-stage process requiring collaboration between numerous government agencies and the public. Environment Canada, the Ontario Ministry of the Environment, and the Niagara Peninsula Conservation Authority are the agencies guiding the development and implementation of the Niagara River (Ontario) RAP. The first stage is to determine the severity and causes of the environmental degradation that resulted in the location being designated an Area of Concern; the second stage is to identify and implement actions that will restore and protect the health of the ecosystem; and the third stage is to monitor the area to ensure that the ecosystem’s health has been restored. Stage one of the RAP commenced in January 1989 when a Public Advisory Committee (PAC) was established. This committee was comprised of concerned citizens and representatives from various community groups, associations, industries and municipalities. After several years of consultation, the Niagara River (Ontario) Remedial Action Plan Stage 2 Report was released in 1995. It contained 16 goals and 37 recommendations. Among them was the need for Canadians and Americans to work more collaboratively in order to successfully restore the water quality in the Niagara River. Stage three of the Niagara River (Ontario) RAP is currently ongoing, but it is estimated that it will be completed by 2015. At that point, the Niagara River Area of Concern will be delisted, although monitoring of the area will continue to ensure it remains healthy.

A DFT Guided/Experimental Approach to Asymmetric Allylation and Phase-Transfer Catalysis

The Dudding group is interested in the application of Density Functional Theory (DFT) in developing asymmetric methodologies, and thus the focus of this dissertation will be on the integration of these approaches. Several interrelated subsets of computer aided design and implementation in catalysis have been addressed during the course of these studies. The first of the aims rested upon the advancement of methodologies for the synthesis of biological active C(1)-chiral 3-methylene-indan-1-ols, which in practice lead to the use of a sequential asymmetric Yamamoto-Sakurai-Hosomi allylation/Mizoroki Heck reaction sequence. An important aspect of this work was the utilization of ortho-substituted arylaldehyde reagents which are known to be a problematic class of substrates for existing asymmetric allylation approaches. The second phase of my research program lead to the further development of asymmetric allylation methods using o-arylaldehyde substrates for synthesis of chiral C(3)-substituted phthalides. Apart from the de novo design of these chemistries in silico, which notably utilized water-tolerant, inexpensive, and relatively environmental benign indium metal, this work represented the first computational study of a stereoselective indium-mediated process. Following from these discoveries was the advent of a related, yet catalytic, Ag(I)-catalyzed approach for preparing C(3)-substituted phthalides that from a practical standpoint was complementary in many ways. Not only did this new methodology build upon my earlier work with the integrated (experimental/computational) use of the Ag(I)-catalyzed asymmetric methods in synthesis, it provided fundamental insight arrived at through DFT calculations, regarding the Yamamoto-Sakurai-Hosomi allylation. The development of ligands for unprecedented asymmetric Lewis base catalysis, especially asymmetric allylations using silver and indium metals, followed as a natural extension from these earlier discoveries. To this end, forthcoming as well was the advancement of a family of disubstituted (N-cyclopropenium guanidine/N-imidazoliumyl substituted cyclopropenylimine) nitrogen adducts that has provided fundamental insight into chemical bonding and offered an unprecedented class of phase transfer catalysts (PTC) having far-reaching potential. Salient features of these disubstituted nitrogen species is unprecedented finding of a cyclopropenium based C-H•••πaryl interaction, as well, the presence of a highly dissociated anion projected them to serve as a catalyst promoting fluorination reactions. Attracted by the timely development of these disubstituted nitrogen adducts my last studies as a PhD scholar has addressed the utility of one of the synthesized disubstituted nitrogen adducts as a valuable catalyst for benzylation of the Schiff base N-diphenyl methylene glycine ethyl ester. Additionally, the catalyst was applied for benzylic fluorination, emerging from this exploration was successful fluorination of benzyl bromide and its derivatives in high yields. A notable feature of this protocol is column-free purification of the product and recovery of the catalyst to use in a further reaction sequence.

New pandemics: HIV and AIDS, HCV and chronic hepatitis, Influenza virus and flu.

New pandemics are a serious threat to the health of the entire world. They are essentially of viral origin and spread at large speed. A meeting on this topic was held in Lyon, France, within the XIXth Jacques Cartier Symposia, a series of France-Québec meetings held every year. New findings on HIV and AIDS, on HCV and chronic hepatitis, and an update on influenza virus and flu were covered during this meeting on December 4 and 5, 2006. Aspects of viral structure, virus-host interactions, antiviral defenses, drugs and vaccinations, and epidemiological aspects were discussed for HIV and HCV. Old and recent data on the flu epidemics ended this meeting.

L’influence du développement durable à travers la formation universitaire en design industriel

Aujourd’hui, nous savons qu’environ 75 à 80% des impacts environnementaux des produits sont déterminés lors de la conception. Le rôle du designer industriel est donc crucial pour arriver à une forme de développement plus viable. Cette recherche tente de cibler les champs de connaissances qui devraient faire partie de la formation des professionnels du développement de produits pour y intégrer les aspects environnementaux. Après une recension de la littérature en design industriel, en pédagogie et en environnement, l’étude de terrain a été conduite en deux temps. Selon des critères prédéfinis, des programmes universitaires « spécialisés » en environnement/développement durable, au Québec, ainsi que des formations en éco-conception, offerts en France, ont été analysés. L’étude de terrain a été complétée par un entretien en profondeur semi-dirigé avec un consultant, qui aide des entreprises québécoises à intégrer l’environnement en développement de produits. L’analyse des informations recueillies met en évidence la nécessité de transformer rapidement les formations universitaires en conception de produits. Le nouveau cursus de design industriel devrait; 1. Intégrer les connaissances relatives aux impacts environnementaux; 2. Encourager le travail en équipes multidisciplinaires pour enrichir la collecte d’informations relative aux projets de développement; 3. Établir une collaboration étroite entre les établissements d’enseignement et les industries, ce qui est essentiel à la compréhension des enjeux de développement de produits et services (culture de l’entreprise, coût, délais, logistique, réglementation, etc.).

Analyse d’implantation d’un système de gestion intégrée en environnement et en santé et sécurité du travail

Les systèmes de gestion intégrée en environnement et en santé et sécurité du travail (SGI) sont un nouveau paradigme de gestion dans les organisations modernes. Ces systèmes sont construits à partir des normes ISO 14001 et d’OHSAS 18001, basées sur la prévention des risques et le principe de précaution. La littérature sur les SGI témoigne d’un marasme conceptuel prédominant depuis plus de 10 ans; elle insiste sur l’urgence d’un consensus taxinomique et conceptuel afin de définir les systèmes de gestion intégrée et de différencier le mécanisme d’intégration de celui de l’implantation. Cette lacune conceptuelle enlise les connaissances dans un fossé épistémologique, retardant ainsi le débat dans ce nouveau champ d’études. Les rares connaissances dont nous disposons dans ce domaine proviennent de quelques études théoriques et de six études empiriques, toutes préoccupées par la compatibilité des multiples systèmes et des avantages économiques de leur intégration. Les évidences engendrées par ces études sont insuffisantes pour appréhender la dynamique du nouveau paradigme dont les effets demeurent peu connus. Cette situation révèle l’urgence d’agir dans un contexte où l’utilisation des SGI se multiplie, et où leur tendance à minimiser l’importance des risques devient de plus en plus préoccupante. Aucune étude ne s’est encore penchée sur l’implantation d’un SGI en environnement et en santé et sécurité du travail construit uniquement à partir des normes ISO 14001 et d’OHSAS 18001. Cette connaissance est importante pour expliquer les effets de tels systèmes. C’est dans cette perspective que nous avons réalisé cette première étude empirique d’un SGI selon les normes ISO 14001 et d’OHSAS 18001. Nos questions de recherche portent sur le mode, le degré d’implantation, les effets du SGI, ainsi que sur les facteurs contextuels qui interviennent pour expliquer les variations dans le degré d’implantation et les effets du SGI. Il s’agit d’une recherche à prélèvement qualitatif qui repose sur un devis d’étude de cas, avec des niveaux d’analyse imbriqués, et comportant une double visée descriptive et explicative. Notre échantillon, de type raisonné, regroupait trente-cinq intervenants provenant de différentes instances hiérarchiques ; il incluait également des représentants syndicaux. Notre échantillon était composé de 7 usines, accréditées aux normes ISO 14001, OHSAS 18001, et dispersées dans différentes villes du Québec. Ces usines différaient tant par leur technologie, leur âge, leur taille, et leurs types de production. Nos données ont été recueillies en 2004; elles sont basées sur des entrevues semi dirigées, sur des observations directes lors de la visite des lieux; elles s’appuient aussi sur des consultations de documents internes et sur des outils électroniques implantés. La transcription des entrevues effectuée, le contenu des discours a été catégorisé selon les cinq dimensions du SGI: engagement, planification, mise en opération, contrôle et revue de la direction. Une condensation horizontale avait précédé l’analyse de chaque cas et l’analyse transversale des cas selon une approche à la fois inductive et déductive. Les résultats de notre recherche ont révélé deux modes d’implantation : le mode d’enrichissement et le mode de fusion. Ces modes dépendaient de la nature des structures fonctionnelles en place. La visée d’amélioration continue à la base du SGI n’avait pas réussi à concilier les approches traditionnelles bottom up et top down qui ont dominé cette implantation; son mécanisme était guidé par 4 types de stratégies : l’économie des ressources, le contrôle des forces d’influences, la stratégie des fruits faciles à cueillir et la stratégie à petits pas. Pour analyser le degré d’implantation, nous avons tenu compte de l’effort de structuration du SGI et de la force d’utilisation des processus implantés à chacune des cinq dimensions du SGI. Les résultats de notre recherche révèlent une variabilité certaine du degré d’implantation entre les usines d’une part, et entre les processus associés aux cinq dimensions du SGI d’autre part. L’analyse des discours a permis de produire cinq hypothèses qui soutiennent l’effort de structuration et la force d’utilisation du SGI: (i) l’hypothèse de la force de cohésion, (ii) l’hypothèse de la spécificité du processus, (iii) l’hypothèse de la portée du processus, (iv) l’hypothèse de la capacité organisationnelle, (v) l’hypothèse de l’acceptation du changement. L’implantation du SGI était soumise à l’influence de multiples facteurs; ils étaient de nature politique, structurelle et organisationnelle. Ces facteurs avaient agi sur le processus d’implantation en amorçant une cascade d’interactions au cours desquelles leurs forces d’influences se renforçaient, se neutralisaient ou s’additionnaient pour affecter le degré d’implantation. Les facteurs facilitant touchaient surtout l’effort de structuration ; ils incluaient : l’expérience des systèmes de gestion, l’implication de la direction, celle du syndicat ou du CSS, la structure organisationnelle, le niveau d’éducation, l’âge et la taille de l’usine. Quant aux facteurs contraignants, ils agissaient sur la force d’utilisation ; ils incluaient : la lourdeur procédurale, le manque de temps, le manque de formation, le manque de ressources, la culture organisationnelle, la structure organisationnelle, le fossé intergénérationnel, l’absence du syndicat et l’âge de l’usine. Trois effets proximaux escomptés par l’entreprise ont été observés. (i) La rigueur de la gestion était associée à l’application des exigences du SGI; elle touchait la gouvernance en environnement et en santé et sécurité du travail, les mécanismes de gestion et les procédés de production. (ii) La standardisation était reliée au mode d’implantation du SGI; elle concernait les pratiques, les outils, les méthodes de travail et l’organisation des ressources. (iii) La rupture des silos est un effet relié au mode d’implantation du SGI; elle touchait les structures départementales, les frontières professionnelles, les relations et climat de travail. Ces effets proximaux avaient provoqué plusieurs effets émergents, plus distaux: une augmentation du pouvoir de contrôle syndical, un renforcement de la légitimité des recommandations soumises par les spécialistes professionnels, la création de réseaux inter organisationnels et le transfert du savoir. L’implantation du SGI avait transformé la gouvernance et les pratiques en environnement et en santé et sécurité du travail dans les sept usines. Toutefois, elle ne semblait pas garantir l’immunité du processus de gestion des risques à l’environnement ni à la santé et sécurité du travail. Sa capacité à diluer les risques devait retenir l’attention des politiques de santé publiques et des programmes de prévention des risques à l’environnement et à la santé et sécurité du travail. L’amélioration de la gestion des risques demeurait un effet attendu non observé et soumis à des facteurs contextuels qui pourraient l’empêcher de se concrétiser. À cet égard, le transfert du savoir, renforcé par l’émergence des réseaux inter organisationnels, semblait offrir une avenue beaucoup plus prometteuse et accessible. C’est l’une des contributions de cette recherche. Elle a aussi (i) proposé une typologie des modes d’implantation et des effets du SGI (ii) préconisé une méthode détaillée d’une meilleure appréciation du degré d’implantation (iii) précisé le rôle des facteurs contextuels dans l’explication des variations du degré d’implantation et dans la production des effets, (iv) proposé des hypothèses sur la structuration et l’utilisation du SGI (v) offert une perspective plurielle et approfondie de la dynamique de l’implantation du SGI grâce à la variété de l’échantillon des répondants et des usines. Il s’agit de la première étude de terrain dans le domaine. À notre connaissance, aucune autre étude n’a eu de tels résultats. Mots Clés : ISO 14001, OHSAS 18001, gestion intégrée, environnement, santé et sécurité du travail, risques environnementaux, risques en santé et sécurité du travail, analyse d’implantation, degré d’implantation, SGI, transfert du savoir.

Épidémiologie spatiale de la campylobactériose au Québec

La campylobactériose représente la principale cause de gastro-entérite bactérienne dans les pays industrialisés. L’épidémiologie de la maladie est complexe, impliquant plusieurs sources et voies de transmission. L’objectif principal de ce projet était d’étudier les facteurs environnementaux impliqués dans le risque de campylobactériose et les aspects méthodologiques pertinents à cette problématique à partir des cas humains déclarés au Québec (Canada) entre 1996 et 2006. Un schéma conceptuel des sources et voies de transmission de Campylobacter a d’abord été proposé suivant une synthèse des connaissances épidémiologiques tirées d’une revue de littérature extensive. Le risque d’une récurrence de campylobactériose a ensuite été décrit selon les caractéristiques des patients à partir de tables de survie et de modèles de régression logistique. Comparativement au risque de campylobactériose dans la population générale, le risque d’un épisode récurrent était plus élevé pour les quatre années suivant un épisode. Ce risque était similaire entre les genres, mais plus élevé pour les personnes de régions rurales et plus faible pour les enfants de moins de quatre ans. Ces résultats suggèrent une absence d’immunité durable ou de résilience clinique suivant un épisode déclaré et/ou une ré-exposition périodique. L’objectif suivant portait sur le choix de l’unité géographique dans les études écologiques. Neuf critères mesurables ont été proposés, couvrant la pertinence biologique, la communicabilité, l’accès aux données, la distribution des variables d’exposition, des cas et de la population, ainsi que la forme de l’unité. Ces critères ont été appliqués à des unités géographiques dérivées de cadre administratif, sanitaire ou naturel. La municipalité affichait la meilleure performance, étant donné les objectifs spécifiques considérés. Les associations entre l’incidence de campylobactériose et diverses variables (densité de volailles, densité de ruminants, abattoirs, température, précipitations, densité de population, pourcentage de diplomation) ont ensuite été comparées pour sept unités géographiques différentes en utilisant des modèles conditionnels autorégressifs. Le nombre de variables statistiquement significatives variait selon le degré d’agrégation, mais la direction des associations était constante. Les unités plus agrégées tendaient à démontrer des forces d’association plus élevées, mais plus variables, à l’exception de l’abattoir. Cette étude a souligné l’importance du choix de l’unité géographique d’analyse lors d’une utilisation d’un devis d’étude écologique. Finalement, les associations entre l’incidence de campylobactériose et des caractéristiques environnementales ont été décrites selon quatre groupes d’âge et deux périodes saisonnières d’après une étude écologique. Un modèle de Poisson multi-niveau a été utilisé pour la modélisation, avec la municipalité comme unité. Une densité de ruminant élevée était positivement associée avec l’incidence de campylobactériose, avec une force d’association diminuant selon l’âge. Une densité de volailles élevée et la présence d’un abattoir de volailles à fort volume d’abattage étaient également associées à une incidence plus élevée, mais seulement pour les personnes de 16 à 34 ans. Des associations ont également été détectées avec la densité de population et les précipitations. À l’exception de la densité de population, les associations étaient constantes entre les périodes saisonnières. Un contact étroit avec les animaux de ferme explique le plus vraisemblablement les associations trouvées. La spécificité d’âge et de saison devrait être considérée dans les études futures sur la campylobactériose et dans l’élaboration de mesures préventives.