Initial Development and Characterization of PLGA Nanospheres Containing Ropivacaine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DELAYED-TYPE HYPERSENSITIVITY RESPONSE IN AN ISOGENIC MURINE MODEL OF PARACOCCIDIOIDOMYCOSIS

The specific delayed-type hypersensitivity (DTH) response was evaluated in resistant (A/SN) and susceptible (B10.A) mice intraperitoneally infected with yeasts from a virulent (Pb18) or from a non-virulent (Pb265) Paracoccidioides brasiliensis isolates. Both strains of mice were footpad challenged with homologous antigens. Pb18 infected A/SN mice developed an evident and persistent DTH response late in the course of the disease (90th day on) whereas B10.A animals mounted a discrete and ephemeral DTH response at the 14th day post-infection. A/SN mice infected with Pb265 developed cellular immune responses whereas B10.A mice were almost always anergic. Histological analysis of the footpads of infected mice at 48 hours after challenge showed a mixed infiltrate consisting of predominantly mononuclear cells. Previous infection of resistant and susceptible mice with Pb18 did not alter their DTH responses against heterologous unrelated antigens (sheep red blood cells and dinitrofluorobenzene) indicating that the observed cellular anergy was antigen-specific. When fungal related antigens (candidin and histoplasmin) were tested in resistant mice, absence of cross-reactivity was noted. Thus, specific DTH responses against P. brasiliensis depend on both the host's genetically determined resistance and the virulence of the fungal isolate.

EFFECT OF MACROPHAGE BLOCKADE ON THE RESISTANCE OF INBRED MICE TO PARACOCCIDIOIDES-BRASILIENSIS INFECTION

The effect of macrophage blockade on the natural resistance and on the adaptative immune response of susceptible (B10.D2/oSn) and resistant (A/Sn) mice to Paracoccidioides brasiliensis infection was investigated. B10.D2/oSn and A/Sn mice previously injected with colloidal carbon were infected ip with yeast cells to determine the 50% lethal dose, and to evaluate the anatomy and histopathology, macrophage activation, antibody production and DTH reactions. Macrophage blockade rendered both resistant and susceptible mice considerably more susceptible to infection, as evidenced by increased mortality and many disseminated lesions. P. brasiliensis infection and/or carbon treatment increased the ability of macrophages from resistant mice to spread up to 25 days after treatment. In susceptible mice the enhanced spreading capacity induced by carbon treatment was impaired at ail assayed periods except at 1 week after infection. Macrophage blockade enhanced DTH reactions in resistant mice, but did not alter these reactions in susceptible mice, which remained anergic. To the contrary, macrophage blockade enhanced specific antibody production by susceptible mice, but did nor affect the low levels produced by resistant mice. The effect of macrophage blockade confirms the natural tendency of resistant animals to mount DTH reactions in the course of the disease and the preferential antibody response developed by susceptible mice after P. brasiliensis infection. on the whole, macrophage functions appear to play a fundamental role in the natural and acquired resistance mechanisms to P. brasiliensis infection.

Kinetic parameters obtained for thermal decomposition of acrylic resins present in commercial paint emulsions

Samples of water based commercial acrylic resin paints were spread in a film form on slides, dried at room temperature and exposed to solar radiation for up to eight months.The characterization and quantification of resins and charges in the white paint emulsion were carried out for the thermal decomposition. Besides this, X-ray diffractometry was used to identify CaCO3 as charge and TiO2 (rutile phase) as pigment.It was observed through thermal techniques similar behavior to the samples even though with varied exposure time.Kinetic studies of the samples allowed to obtain the activation energy (Ea) and Arrhenius parameters (A) to the thermal decomposition of acrylic resin to three different commercial emulsion (called P-1, P-2, P-3) through non-isothermal procedures. The values of E. varied regarding the exposition time (eight months) and solar radiation from 173 to 197 U mol(-1) (P-1 sample), from 175 to 226 W mol(-1) (P-2 sample) and 206 to 197 kJ mol(-1) (P-3 sample).Kinetic Compensation Effect (KCE) observed for samples P-2 and P-3 indicate acrylic resin s present in these may be similar in nature. This aspect could be observed by a small difference in the thermal behavior of the TG curves from P I to P-2 and P-3 sample.The simulated kinetic model to all the samples was the autocatalytic estdk Berggreen.

Effect of the modifier ion on the properties of MgFe2O4 and ZnFe2O4 pigments

Magnesium and zinc ferrites have been prepared by the polymeric precursor method. The organic material decomposition was studied by thermogravimetry (TG) and differential thermal analysis (DTA). The variation of crystalline phases and particle morphology with calcination temperature were investigated using X-ray diffraction (XRD) and scanning electronic microscopy (SEM), respectively. The colors of the ferrites were evaluated using colorimetry. Magnesium ferrite crystallizes above 800 degrees C, presenting a yellow-orange color with a reflectance peak at the 600-650 nm range, while zinc ferrite crystallizes at 600 degrees C, with a reflectance peak between 650-700 nm, corresponding to the red-brick color.

Influence of processing conditions on the thermal decomposition of SrTiO3 precursors

The present work investigates the influence of milling and calcination atmosphere on the thermal decomposition of SrTiO3 powder precursors. Both pure and neodymium-modified SrTiO3 samples were studied. Milling did not significantly influence numerical mass loss value, but reduced the number of decomposition steps, modifying the profiles of the TG and DTA curves. on the other hand, milling increases the amount of energy liberated by the system upon combustion of organic matter. It was also observed that the milling process, associated to the calcination in an oxygen atmosphere, considerably decreases the amount of organic matter and increases the final mass loss temperature.

Simple generalization of Wisdom's perturbative method

A simple generalization of Wisdom's perturbative method, as originally proposed by Wisdom (1985), is obtained. Any number of resonant cosines can be handled and the method can also accommodate more involved disturbing functions. Averaged trajectories are easily obtained by drawing level curves of the action. Here, the method is first tested for simple models of 3:1 and 2:1 resonant problems. Comparisons with numerical integration and surface-section curves show very good agreements.

Geometrical Lagrangian for a supersymmetric Yang-Mills theory on the group manifold

Perhaps one of the main features of Einstein's General Theory of Relativity is that spacetime is not flat itself but curved. Nowadays, however, many of the unifying theories like superstrings on even alternative gravity theories such as teleparalell geometric theories assume flat spacetime for their calculations. This article, an extended account of an earlier author's contribution, it is assumed a curved group manifold as a geometrical background from which a Lagrangian for a supersymmetric N = 2, d = 5 Yang-Mills - SYM, N = 2, d = 5 - is built up. The spacetime is a hypersurface embedded in this geometrical scenario, and the geometrical action here obtained can be readily coupled to the five-dimensional supergravity action. The essential idea that underlies this work has its roots in the Einstein-Cartan formulation of gravity and in the 'group manifold approach to gravity and supergravity theories'. The group SYM, N = 2, d = 5, turns out to be the direct product of supergravity and a general gauge group g: G = g circle times <(SU(2, 2/1))over bar>.

Influence of heat treatment on the optical properties of SnO2 : Sb thin films deposited by dip coating using aqueous solution

Antimony doped tin oxide thin films were deposited on glass by a chemical route derived from Pechini method. Particular emphasis was given to the microstructure of crystallized films. Crystalline phase formation was studied by grazing incident X-ray diffraction and by thermal analyses. Scanning electron microscopy was carried out for microstructure characterization, surface roughness was observed using scanning tunneling microscope and the optical transmittance measurements were performed in the wavelength range of 200-800 nm. (C) 2002 Kluwer Academic Publishers.

Preparation of ZnO nanoparticles: Structural study of the molecular precursor

The structure of zinc acetate derived precursor currently used in the sol-gel synthesis of ZnO nanoparticles is described. The reaction products obtained before and after reflux of ethanolic zinc acetate solution have been studied by UV-Vis, photoluminescence, FTIR and EXAFS at the Zn K edge. EXAFS results evidence for both precursor solutions a change from the octahedral coordination sphere of oxygen atoms characteristic of the solid zinc acetate dihydrate compound into a four-fold environment. The EXAFS spectra of precursor solutions can be satisfactorily reproduced using the molecular structure reported for Zn4O(Ac)(6) (Ac = COOCH3). UV-Vis and FTIR measurements are also in agreement with the formation of this oligomeric precursor. The structural modification is more pronounced after reflux at 80degreesC, because the increase of the Zn4O(Ac)(6) amount and the formation of nearly 3.0 nm sized ZnO nanoparticle.

APPLICATION OF WISDOMS PERTURBATIVE METHOD TO THE 5/2 AND 7/3 RESONANCES

Wisdom's perturbative method is applied to the 5:2 and 7:3 resonances. Some comparisons with Yoshikawa's model are performed: for values of eccentricity up to about 0.3-0.4, agreement exists and it is better for 5:2 resonance. A clear difference between the cases 5:2 and 7:3 is observed : the former one, like in the case 3:1, can show significant variations of eccentricity, even starting from very small values, close to zero, while the latter seems to undergo such variations, but with initial eccentricity not less than a value near 0.1.

Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti-6Al-7Nb alloy in Hank's solution

The influence of potential on electrochemical behavior of Ti-6Al-7Nb alloy under simulate physiological conditions was investigated by electrochemical impedance spectroscopy (EIS). The experimental results were compared with those obtained by potentiodynamic polarization curves. All measurements were carried out in Hank's aerated solution at 25degreesC, at pH 7.8 and at different potentials (corrosion potential, 0 mV(SCE), 1000 mV(SCE), and 2000 mV(SCE)). The EIS spectra exhibited a two-step or a two-time constant system, suggesting the formation of a two-layer oxide film on the metal surface. The high corrosion resistance, displayed by this alloy in electrochemical polarization tests, is due to the dense inner layer, while its osseointegration ability can be ascribed to the presence of the outer porous layer. (C) 2004 Kluwer Academic Publishers.

Synaptonemal polycomplexes in spermatids: a characteristic trait of Orthoptera?

Spermatogenesis was analysed in a cricket, Eneoptera surinamensis (Gryllidae, Orthoptera), using ultrathin serial sections and transmission electron microscopy. Special attention was placed on documentation of the development and structure of synaptonemal polycomplexes (PCs) within spermatid nuclei. Pachytene spermatocytes showed the usual tripartite synaptonemal complexes in the nuclear lumen. PCs were situated close to chromosomes at the periphery of spindles in prometaphase I spermatocytes, where microtubule density was low. The PCs are probably incorporated into the daughter nuclei of both meiotic divisions by adhesion to chromosomes. Finally, PCs end up within spermatid nuclei. Analysis of serial sections through three nuclei of young spermatids revealed at least one PC within each. The PCs were intimately attached to an electrondense spherical nuclear body. This topographical correlation was confirmed through inspection of random sections. The PCs may have an affinity to the spherical bodies. In more developed spermatids, PCs and nuclear bodies were missing. Disassembly products of the PCs may play a role in spermatid maturation. In a series of other Orthoptera species, PCs have been reported to occur in the cytoplasm or the nuclei of spermatids. In most other systematic groups, PCs do not form at all or disassemble earlier. The presence of PCs in young spermatids, therefore, seems to be typical of Orthoptera.

Testing transposable elements as genetic drive mechanisms using Drosophila P element constructs as a model system

The use of transposable elements (TEs) as genetic drive mechanisms was explored using Drosophila melanogaster as a model system. Alternative strategies, employing autonomous and nonautonomous P element constructs were compared for their efficiency in driving the ry(+) allele into populations homozygous for a ry(-) allele at the genomic rosy locus. Transformed flies were introduced at 1%, 5%, and 10% starting frequencies to establish a series of populations that were monitored over the course of 40 generations, using both phenotypic and molecular assays. The transposon-borne ry(+) marker allele spread rapidly in almost all populations when introduced at 5% and 10% seed frequencies, but 1% introductions frequently failed to become established. A similar initial rapid increase in frequency of the ry(+) transposon occurred in several control populations lacking a source of transposase. Constructs carrying ry(+) markers also increased to moderate frequencies in the absence of selection on the marker. The results of Southern and in situ hybridization studies indicated a strong inverse relationship between the degree of conservation of construct integrity and transposition frequency. These finding have relevance to possible future applications of transposons as genetic drive mechanisms.

Genetic relationships between Brazilian species of Molossidae and Phyllostomidae (Chiroptera, Mammalia)

A comparative analysis of G-banded karyotypes was performed for seven species of Chiroptera, representing two families (Phyllostomidae and Molossidae). Despite the differences in diploid and fundamental numbers, extensive homologies between six karyotypes were identified: A . planirostris, P. lineatus, S. lilium, G. soricina, P. hastatus (Phyllostomidae) and M. rufus (Molossidae). Robertsonian rearrangements and pericentric inversions account for the differences between the karyotypes of phyllostomid and molossid species. The homologies and rearrangements observed reinforce the monophiletic origin of phyllostomids and the inclusion of species in different subfamilies. In situ hybridization with genomic DNA revealed considerable conservation of the karyotypes, including C. perspicillata, that did not show G-band homologies with the other species analyzed. For the first time, chromosomal evidence is presented of a common origin for Phyllostomidae and Molossidae.