Les traitements laser en dermatologie pédiatrique [Laser treatments in pediatric dermatology].

Lasers in pediatric dermatology were developed as a result of the treatment of port-wine stains. Infantile hemangiomas may benefit, in some cases, from laser treatment as well as venous and lymphatic malformations. For certain pigmented lesions, as well as some hamartomas, laser treatments are a credible alternative to surgical resection. Bum scars are improved by lasers which stimulate collagen remodeling. Furthermore, hair removal of congenital and acquired hypertrichosis can relieve psychosocial discomfort and improve quality of life. The management of pain and fear of children undergoing laser treatment, using either topical or general anesthesia, remains of central importance.

Assessment of the role of LASER-Doppler in the treatment of port-wine stains in infants.

BACKGROUND: Port-wine stains (PWS) are malformations of capillaries in 0.3% of newborn children. The treatment of choice is by pulsed dye LASER (PDL), and requires several sessions. The efficacy of this treatment is at present evaluated on the basis of clinical inspection and of digital photographs taken throughout the treatment. LASER-Doppler imaging (LDI) is a noninvasive method of imaging the perfusion of the tissues by the microcirculatory system (capillaries). The aim of this paper is to demonstrate that LDI allows a quantitative, numerical evaluation of the efficacy of the PDL treatment of PWS. METHOD: The PDL sessions were organized according to the usual scheme, every other month, from September 1, 2012, to September 30, 2013. LDI imaging was performed at the start and at the conclusion of the PDL treatment, and simultaneously on healthy skin in order to obtain reference values. The results evidenced by LDI were analyzed according to the "Wilcoxon signed-rank" test before and after each session, and in the intervals between the three PDL treatment sessions. RESULTS: Our prospective study is based on 20 new children. On average, the vascularization of the PWS was reduced by 56% after three laser sessions. Compared with healthy skin, initial vascularization of PWS was 62% higher than that of healthy skin at the start of treatment, and 6% higher after three sessions. During the 2 months between two sessions, vascularization of the capillary network increased by 27%. CONCLUSION: This study shows that LDI can demonstrate and measure the efficacy of PDL treatment of PWS in children. The figures obtained when measuring the results by LDI corroborate the clinical assessments and may allow us to refine, and perhaps even modify, our present use of PDL and thus improve the efficacy of the treatment.

Laser Doppler -vibrometrin käyttöönotto tärinämittauksissa

Tässä insinöörityössä otettiin käyttöön VTI Technologies Oy:lle hankittu laser Doppler - vibrometri, joka mittaa tärinää perustuen valon Dopplerin siirtymään. Työn tavoitteena oli perehtyä mittauslaitteistoon, muodostaa sille näytteenottolaitteisto ja käytännössä arvioida sen kyvykkyyttä mitata tärinää ja tuottaa uutta informaatiota. Työn teoreettisessa osuudessa perehdytään laser Doppler -vibrometrin teknologiaan ja toimintaperiaatteeseen sekä värähtelevien systeemien dynamiikkaan ja mallintamiseen. Työn käytännön osuuden suorittamiseksi perehdyttiin myös tärinätestauslaitteiston toimintaan, analogiasignaalin näytteenottoon sekä diskreettiin Fourier-muunnokseen perustuvaan signaalin spektrianalyysiin. Työssä käsitellään myös laser-mittauksen kohinalähteitä ja spektrianalyysin virhelähteitä. Työn käytännön osuudessa ohjelmoitiin Labview-mittausohjelmisto näytteenottolaitteistolle. Mittausohjelmistolla voidaan näytteistää vibrometrin mittaussignaalia ja muodostaa sen taajuusspektri. Mittauskohteita tässä työssä olivat kulmakiihtyvyystäryttimen mekaanisen liikkeen mittaus ja elementtikiekkosahan terän värähtelyjen mittaus. Mittaustulokset kulmakiihtyvyystäryttimestä osoittivat sen mekaanisen liikkeen säröytyvän voimakkaasti, johtuen todennäköisesti sen testialustan rakenteesta. Testialustan rakennetta tullaan kehittämään ja mittaukset toistetaan. Mittaustuloksiin elementtikiekkosahasta tuli suhtautua epäillen, koska mittaussignaalin intensiteetti oli erittäin heikko. Mittausten onnistuminen Laser Doppler -vibrometrillä edellyttää riittävää mittauskohteesta takaisinheijastuneen laser-valon intensiteettiä. Mittaustulokset osoittivat laser Doppler -vibrometrin olevan hyödyllinen työkalu tutkivassa tärinämittauksessa. Mittauskohteet, joiden pinta heijastaa huonosti valoa ja joihin ei voi asentaa erityistä heijastavaa teippiä, ovat kuitenkin haaste ja asettavat rajoituksen laser Doppler -vibrometrin käyttömahdollisuuksille. Tämän työn mittaustuloksia voidaan käyttää kulmakiihtyvyystäryttimen uusintamittausten vertailukohtana, kun arvioidaan kehitystyön onnistumista. Tätä työtä voidaan käyttää myös laser Doppler -vibrometrin ohjekirjana tärinämittauksissa.

Domain matched epitaxial growth of Bi1.5Zn1Nb1.5O7 thin films by pulsed laser deposition

Bi1.5Zn1Nb1.5O7 (BZN) epitaxial thin films were grown by pulsed laser deposition on Al2O3 with a double ZnO buffer layer through domain matching epitaxy (DME) mechanism. The pole figure analysis and reciprocal space mapping revealed the single crystalline nature of the thin film. The pole figure analysis also shows a 60º twinning for the (222) oriented crystals. Sharp intense spots in the SAED pattern also indicate the high crystalline nature of BZN thin film. The Fourier filtered HRTEM images of the BZN-ZnO interface confirms the domain matched epitaxy of BZN with ZnO buffer. An electric field dependent dielectric tunability of 68% was obtained for the BZN thin films with inter digital capacitors patterned over the film.

Cognitive anatomy of the temporal lobe: Effect of personality in population with mild cognitive impairment & Functional specialization for memory systems in healthy individuals.

Résumé: L'impact de la maladie d'Alzheimer (MA) est dévastateur pour la vie quotidienne de la personne affectée, avec perte progressive de la mémoire et d'autres facultés cognitives jusqu'à la démence. Il n'existe toujours pas de traitement contre cette maladie et il y a aussi une grande incertitude sur le diagnostic des premiers stades de la MA. La signature anatomique de la MA, en particulier l'atrophie du lobe temporal moyen (LTM) mesurée avec la neuroimagerie, peut être utilisée comme un biomarqueur précoce, in vivo, des premiers stades de la MA. Toutefois, malgré le rôle évident du LMT dans les processus de la mémoire, nous savons que les modèles anatomiques prédictifs de la MA basés seulement sur des mesures d'atrophie du LTM n'expliquent pas tous les cas cliniques. Au cours de ma thèse, j'ai conduit trois projets pour comprendre l'anatomie et le fonctionnement du LMT dans (1) les processus de la maladie et dans (2) les processus de mémoire ainsi que (3) ceux de l'apprentissage. Je me suis intéressée à une population avec déficit cognitif léger (« Mild Cognitive Impairment », MCI), à risque pour la MA. Le but du premier projet était de tester l'hypothèse que des facteurs, autres que ceux cognitifs, tels que les traits de personnalité peuvent expliquer les différences interindividuelles dans le LTM. De plus, la diversité phénotypique des manifestations précliniques de la MA provient aussi d'une connaissance limitée des processus de mémoire et d'apprentissage dans le cerveau sain. L'objectif du deuxième projet porte sur l'investigation des sous-régions du LTM, et plus particulièrement de leur contribution dans différentes composantes de la mémoire de reconnaissance chez le sujet sain. Pour étudier cela, j'ai utilisé une nouvelle méthode multivariée ainsi que l'IRM à haute résolution pour tester la contribution de ces sous-régions dans les processus de familiarité (« ou Know ») et de remémoration (ou « Recollection »). Finalement, l'objectif du troisième projet était de tester la contribution du LTM en tant que système de mémoire dans l'apprentissage et l'interaction dynamique entre différents systèmes de mémoire durant l'apprentissage. Les résultats du premier projet montrent que, en plus du déficit cognitif observé dans une population avec MCI, les traits de personnalité peuvent expliquer les différences interindividuelles du LTM ; notamment avec une plus grande contribution du neuroticisme liée à une vulnérabilité au stress et à la dépression. Mon étude a permis d'identifier un pattern d'anormalité anatomique dans le LTM associé à la personnalité avec des mesures de volume et de diffusion moyenne du tissu. Ce pattern est caractérisé par une asymétrie droite-gauche du LTM et un gradient antéro-postérieur dans le LTM. J'ai interprété ce résultat par des propriétés tissulaires et neurochimiques différemment sensibles au stress. Les résultats de mon deuxième projet ont contribué au débat actuel sur la contribution des sous-régions du LTM dans les processus de familiarité et de remémoration. Utilisant une nouvelle méthode multivariée, les résultats supportent premièrement une dissociation des sous-régions associées aux différentes composantes de la mémoire. L'hippocampe est le plus associé à la mémoire de type remémoration et le cortex parahippocampique, à la mémoire de type familiarité. Deuxièmement, l'activation correspondant à la trace mnésique pour chaque type de mémoire est caractérisée par une distribution spatiale distincte. La représentation neuronale spécifique, « sparse-distributed», associée à la mémoire de remémoration dans l'hippocampe serait la meilleure manière d'encoder rapidement des souvenirs détaillés sans interférer les souvenirs précédemment stockés. Dans mon troisième projet, j'ai mis en place une tâche d'apprentissage en IRM fonctionnelle pour étudier les processus d'apprentissage d'associations probabilistes basé sur le feedback/récompense. Cette étude m'a permis de mettre en évidence le rôle du LTM dans l'apprentissage et l'interaction entre différents systèmes de mémoire comme la mémoire procédurale, perceptuelle ou d'amorçage et la mémoire de travail. Nous avons trouvé des activations dans le LTM correspondant à un processus de mémoire épisodique; les ganglions de la base (GB), à la mémoire procédurale et la récompense; le cortex occipito-temporal (OT), à la mémoire de représentation perceptive ou l'amorçage et le cortex préfrontal, à la mémoire de travail. Nous avons également observé que ces régions peuvent interagir; le type de relation entre le LTM et les GB a été interprété comme une compétition, ce qui a déjà été reporté dans des études récentes. De plus, avec un modèle dynamique causal, j'ai démontré l'existence d'une connectivité effective entre des régions. Elle se caractérise par une influence causale de type « top-down » venant de régions corticales associées avec des processus de plus haut niveau venant du cortex préfrontal sur des régions corticales plus primaires comme le OT cortex. Cette influence diminue au cours du de l'apprentissage; cela pourrait correspondre à un mécanisme de diminution de l'erreur de prédiction. Mon interprétation est que cela est à l'origine de la connaissance sémantique. J'ai également montré que les choix du sujet et l'activation cérébrale associée sont influencés par les traits de personnalité et des états affectifs négatifs. Les résultats de cette thèse m'ont amenée à proposer (1) un modèle expliquant les mécanismes possibles liés à l'influence de la personnalité sur le LTM dans une population avec MCI, (2) une dissociation des sous-régions du LTM dans différents types de mémoire et une représentation neuronale spécifique à ces régions. Cela pourrait être une piste pour résoudre les débats actuels sur la mémoire de reconnaissance. Finalement, (3) le LTM est aussi un système de mémoire impliqué dans l'apprentissage et qui peut interagir avec les GB par une compétition. Nous avons aussi mis en évidence une interaction dynamique de type « top -down » et « bottom-up » entre le cortex préfrontal et le cortex OT. En conclusion, les résultats peuvent donner des indices afin de mieux comprendre certains dysfonctionnements de la mémoire liés à l'âge et la maladie d'Alzheimer ainsi qu'à améliorer le développement de traitement. Abstract: The impact of Alzheimer's disease is devastating for the daily life of the affected patients, with progressive loss of memory and other cognitive skills until dementia. We still lack disease modifying treatment and there is also a great amount of uncertainty regarding the accuracy of diagnostic classification in the early stages of AD. The anatomical signature of AD, in particular the medial temporal lobe (MTL) atrophy measured with neuroimaging, can be used as an early in vivo biomarker in early stages of AD. However, despite the evident role of MTL in memory, we know that the derived predictive anatomical model based only on measures of brain atrophy in MTL does not explain all clinical cases. Throughout my thesis, I have conducted three projects to understand the anatomy and the functioning of MTL on (1) disease's progression, (2) memory process and (3) learning process. I was interested in a population with mild cognitive impairment (MCI), at risk for AD. The objective of the first project was to test the hypothesis that factors, other than the cognitive ones, such as the personality traits, can explain inter-individual differences in the MTL. Moreover, the phenotypic diversity in the manifestations of preclinical AD arises also from the limited knowledge of memory and learning processes in healthy brain. The objective of the second project concerns the investigation of sub-regions of the MTL, and more particularly their contributions in the different components of recognition memory in healthy subjects. To study that, I have used a new multivariate method as well as MRI at high resolution to test the contribution of those sub-regions in the processes of familiarity and recollection. Finally, the objective of the third project was to test the contribution of the MTL as a memory system in learning and the dynamic interaction between memory systems during learning. The results of the first project show that, beyond cognitive state of impairment observed in the population with MCI, the personality traits can explain the inter-individual differences in the MTL; notably with a higher contribution of neuroticism linked to proneness to stress and depression. My study has allowed identifying a pattern of anatomical abnormality in the MTL related to personality with measures of volume and mean diffusion of the tissue. That pattern is characterized by right-left asymmetry in MTL and an anterior to posterior gradient within MTL. I have interpreted that result by tissue and neurochemical properties differently sensitive to stress. Results of my second project have contributed to the actual debate on the contribution of MTL sub-regions in the processes of familiarity and recollection. Using a new multivariate method, the results support firstly a dissociation of the subregions associated with different memory components. The hippocampus was mostly associated with recollection and the surrounding parahippocampal cortex, with familiarity type of memory. Secondly, the activation corresponding to the mensic trace for each type of memory is characterized by a distinct spatial distribution. The specific neuronal representation, "sparse-distributed", associated with recollection in the hippocampus would be the best way to rapidly encode detailed memories without overwriting previously stored memories. In the third project, I have created a learning task with functional MRI to sudy the processes of learning of probabilistic associations based on feedback/reward. That study allowed me to highlight the role of the MTL in learning and the interaction between different memory systems such as the procedural memory, the perceptual memory or priming and the working memory. We have found activations in the MTL corresponding to a process of episodic memory; the basal ganglia (BG), to a procedural memory and reward; the occipito-temporal (OT) cortex, to a perceptive memory or priming and the prefrontal cortex, to working memory. We have also observed that those regions can interact; the relation type between the MTL and the BG has been interpreted as a competition. In addition, with a dynamic causal model, I have demonstrated a "top-down" influence from cortical regions associated with high level cortical area such as the prefrontal cortex on lower level cortical regions such as the OT cortex. That influence decreases during learning; that could correspond to a mechanism linked to a diminution of prediction error. My interpretation is that this is at the origin of the semantic knowledge. I have also shown that the subject's choice and the associated brain activation are influenced by personality traits and negative affects. Overall results of this thesis have brought me to propose (1) a model explaining the possible mechanism linked to the influence of personality on the MTL in a population with MCI, (2) a dissociation of MTL sub-regions in different memory types and a neuronal representation specific to each region. This could be a cue to resolve the actual debates on recognition memory. Finally, (3) the MTL is also a system involved in learning and that can interact with the BG by a competition. We have also shown a dynamic interaction of « top -down » and « bottom-up » types between the pre-frontal cortex and the OT cortex. In conclusion, the results could give cues to better understand some memory dysfunctions in aging and Alzheimer's disease and to improve development of treatment.

Fetal laser therapy: applications in the management of fetal pathologies.

Fetoscopic coagulation of placental anastomoses is the treatment of choice for severe twin-to-twin transfusion syndrome. In the present day, fetal laser therapy is also used to treat amniotic bands, chorioangiomas, sacrococcygeal teratomas, lower urinary tract obstructions and chest masses, all of which will be reviewed in this article. Amniotic band syndrome can cause limb amputation by impairing downstream blood flow. Large chorioangiomas (>4 cm), sacrococcygeal teratomas or fetal hyperechoic lung lesions can lead to fetal compromise and hydrops by vascular steal phenomenon or compression. Renal damage, bladder dysfunction and lastly death because of pulmonary hypolasia may be the result of megacystis caused by a posterior urethral valve. The prognosis of these pathologies can be dismal, and therapy options are limited, which has brought fetal laser therapy to the forefront. Management options discussed here are laser release of amniotic bands, laser coagulation of the placental or fetal tumor feeding vessels and laser therapy by fetal cystoscopy. This review, largely based on case reports, does not intend to provide a level of evidence supporting laser therapy over other treatment options. Centralized evaluation by specialists using strict selection criteria and long-term follow-up of these rare cases are now needed to prove the value of endoscopic or ultrasound-guided laser therapy.

Thermal increment due to ErCr: YSGG and CO2 laser irradiation of different implant surfaces. A pilot study

Objective: An evaluation and comparison is made of the thermal increment at different implant surfaces during irradiation with CO2 and ErCr:YSGG lasers. Study design: Five threaded and impacted implants with four types of surfaces were inserted in an adult pig rib: two implants with a hydroxyapatite surface (HA)(impacted and threaded, respectively), a machined titanium surface implant (TI mach), a titanium plasma spray surface implant (TPS), and a sandblasted, acid-etched surface implant (SBAE). A 0.5-mm diameter bone defect was made in the implant apical zone, and a type-K thermocouple (Termopar)® was placed in contact with the implant. The implants were irradiated in the coronal zone of each implant with a CO2 (4 W continuous mode) and an ErCr:YSGG laser (1.5 W, pulsed mode) first without and then with refrigeration. The temperature variations at the implant apical surface were recorded. Results: An apical temperature increase was recorded in all cases during CO2 and ErCr:YSGG laser irradiation without refrigeration. However, when the ErCr:YSGG was used with a water spray, a decrease in temperature was observed in all implants. The acid-etched and sandblasted surfaces were those most affected by the thermal changes. Conclusions: The ErCr:YSGG laser with a water spray applied to the sealing cap or coronal zone of the implants does not generate thermal increments in the apical surface capable of adversely affecting osseointegration and the integrity of the peri-implant bone tissue

Termoablação a laser de tumores hepáticos: atualização

A termoablação por raio laser de tumores hepáticos tem despontado como alternativa válida de tratamento em pacientes que não são candidatos a ressecção cirúrgica. O procedimento pode ser realizado por via percutânea, laparoscópica ou por laparotomia, e orientado por métodos de imagem. O objetivo deste trabalho é apresentar o mecanismo de ação deste método, bem como as suas indicações, contra-indicações, complicações e resultados clínicos, baseados em revisão bibliográfica.

Spontaneous cell polarization: Feedback control of Cdc42 GTPase breaks cellular symmetry.

Spontaneous polarization without spatial cues, or symmetry breaking, is a fundamental problem of spatial organization in biological systems. This question has been extensively studied using yeast models, which revealed the central role of the small GTPase switch Cdc42. Active Cdc42-GTP forms a coherent patch at the cell cortex, thought to result from amplification of a small initial stochastic inhomogeneity through positive feedback mechanisms, which induces cell polarization. Here, I review and discuss the mechanisms of Cdc42 activity self-amplification and dynamic turnover. A robust Cdc42 patch is formed through the combined effects of Cdc42 activity promoting its own activation and active Cdc42-GTP displaying reduced membrane detachment and lateral diffusion compared to inactive Cdc42-GDP. I argue the role of the actin cytoskeleton in symmetry breaking is not primarily to transport Cdc42 to the active site. Finally, negative feedback and competition mechanisms serve to control the number of polarization sites.

Feblesa de tutories: manca de feedback i autoregulació en l'estudiant d'infermeria. Valoració de l'avaluació continuada en l'assignatura Ciències Psicosocials Aplicades a la Salut en el Grau d'Infermeria (EEES), (2009-2010)

Resum: En el nou model derivat de l"Espai Europeu d"Educació Superior (EEES), l"ensenyament aprenentatge (E-A) es centra en l"estudiant, enfront del rol més destacat del professor en l"ensenyament tradicional. El procés d"experimentació al que assistim en el nostre medi, requereix la valoració de les primeres experiències. Objectiu: L"objectiu d"aquest estudi és identificar si la metodologia utilitzada en l"assignatura Ciències Psicosocials Aplicades a la Salut, en el Grau d"Infermeria a l"Escola d" infermeria de la Universitat de Barcelona, està ben enfocada per assolir una avaluació continuada de qualitat. Metodologia: Es presenta a traves d"un estudi descriptiu. La població estudiada mitjançant un qüestionari, ha estat els estudiants dels quatre grups de primer curs, del primer any de desenvolupament del Grau d"Infermeria en el nostre Centre, passades el curs acadèmic 2009-2010, amb una mostra total de 221 alumnes. Conclusions: Els resultats permeten tres franges interpretatives: 1) qualificació de notable que fa referència a la modalitat disciplinar i experiència docent del professorat, 2) qualificació entre notable i aprovat referida a la metodologia didàctica i organitzativa, 3) qualificació d"aprovat que fa referència a les tutories.

Feblesa de tutories: manca de feedback i autoregulació en l'estudiant d'infermeria. Valoració de l'avaluació continuada en l'assignatura Ciències Psicosocials Aplicades a la Salut en el Grau d'Infermeria (EEES), (2009-2010)

Resum: En el nou model derivat de l"Espai Europeu d"Educació Superior (EEES), l"ensenyament aprenentatge (E-A) es centra en l"estudiant, enfront del rol més destacat del professor en l"ensenyament tradicional. El procés d"experimentació al que assistim en el nostre medi, requereix la valoració de les primeres experiències. Objectiu: L"objectiu d"aquest estudi és identificar si la metodologia utilitzada en l"assignatura Ciències Psicosocials Aplicades a la Salut, en el Grau d"Infermeria a l"Escola d" infermeria de la Universitat de Barcelona, està ben enfocada per assolir una avaluació continuada de qualitat. Metodologia: Es presenta a traves d"un estudi descriptiu. La població estudiada mitjançant un qüestionari, ha estat els estudiants dels quatre grups de primer curs, del primer any de desenvolupament del Grau d"Infermeria en el nostre Centre, passades el curs acadèmic 2009-2010, amb una mostra total de 221 alumnes. Conclusions: Els resultats permeten tres franges interpretatives: 1) qualificació de notable que fa referència a la modalitat disciplinar i experiència docent del professorat, 2) qualificació entre notable i aprovat referida a la metodologia didàctica i organitzativa, 3) qualificació d"aprovat que fa referència a les tutories.

Validation of and comparison between a semidistributed rainfall-runoff hydrological model (PREVAH) and a spatially distributed snow-evolution model (SnowModel) for snow cover prediction in mountain ecosystems

Snow cover is an important control in mountain environments and a shift of the snow-free period triggered by climate warming can strongly impact ecosystem dynamics. Changing snow patterns can have severe effects on alpine plant distribution and diversity. It thus becomes urgent to provide spatially explicit assessments of snow cover changes that can be incorporated into correlative or empirical species distribution models (SDMs). Here, we provide for the first time a with a lower overestimation comparison of two physically based snow distribution models (PREVAH and SnowModel) to produce snow cover maps (SCMs) at a fine spatial resolution in a mountain landscape in Austria. SCMs have been evaluated with SPOT-HRVIR images and predictions of snow water equivalent from the two models with ground measurements. Finally, SCMs of the two models have been compared under a climate warming scenario for the end of the century. The predictive performances of PREVAH and SnowModel were similar when validated with the SPOT images. However, the tendency to overestimate snow cover was slightly lower with SnowModel during the accumulation period, whereas it was lower with PREVAH during the melting period. The rate of true positives during the melting period was two times higher on average with SnowModel with a lower overestimation of snow water equivalent. Our results allow for recommending the use of SnowModel in SDMs because it better captures persisting snow patches at the end of the snow season, which is important when modelling the response of species to long-lasting snow cover and evaluating whether they might survive under climate change.

Growth and magnetic characterization of Co nanoparticles obtained by femtosecond pulsed laser deposition.

We present a detailed study on the morphology and magnetic properties of Co nanostructures deposited onto oxidized Si substrates by femtosecond pulsed laser deposition. Generally, Co disks of nanometric dimensions are obtained just above the ablation threshold, with a size distribution characterized by an increasingly larger number of disks as their size diminishes, and with a maximum disk size that depends on the laser power density. In Au/Co/Au structures, in-plane magnetic anisotropy is observed in all cases, with no indication of superparamagnetism regardless of the amount of material or the laser power density. Magnetic force microscopy observations show coexistence of single-domain and vortex states for the magnetic domain structure of the disks. Superconducting quantum interference device magnetometry and x-ray magnetic circular dichroism measurements point to saturation magnetization values lower than the bulk, probably due to partial oxidation of the Co resulting from incomplete coverage by the Au capping layer.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.