Detached leaf culture: Viability to evaluate 2,4-D toxicity symptoms in cotton apex leaves

To study the viability of detached leaf culture technique, studies were carried out with detached leaves from cotton apex (true trilobed leaves). The prepared leaves were sprayed with 2,4-D amine and ester, at rates of 10, 30, 70, and 100% of the recommended doses. Detached leaves without herbicide spray were used as controls. Simultaneously, a greenhouse experiment was conducted with the same treatments as used for the detached leaves experiment. Toxicity was measured through a 0-to-5 grading according to the percentage of affected leaf area in the detached leaves experiment or examining the affected rate of whole plant as indicated in the greenhouse. Results showed that the ester form of the herbicide induced earlier and more severe toxicity symptoms in detached leaves and greenhouse grown plants. Positive and significant correlations (p < 0.001) were found between toxicity results obtained at 7 and 14 days after application in detached leaves and greenhouse plants (r = 0.97 and 0.92, respectively). Negative, significant correlations (p < 0.005) were found between the toxicity levels found at 7 and 14 days after application in detached leaves and dry matter of cotton plants grown in the greenhouse (r = -0.92 and -0.92, respectively).

Estimativas de consumo do capim-elefante (Pennisetum purpureum Schum), fornecido picado para vacas lactantes utilizando a técnica do óxido crômico

O consumo de matéria seca (CMS) de vacas mestiças Holandês-Zebu, fistuladas no rúmen, em lactação, foi medido pela diferença de peso do alimento oferecido e das sobras e estimado com auxílio do óxido crômico (Cr2O3) pela produção fecal (PF) e indigestibilidade do alimento. O delineamento experimental foi em três quadrados latinos (3x3) e os tratamentos consistiram de capim-elefante cortado nas idades de 30, 45 e 60 dias. A digestibilidade in vitro da matéria seca (DIVMS) foi determinada nas amostras do capim-elefante e estimada a partir do consumo medido diretamente e pela produção fecal obtida com o Cr2O3. A produção fecal foi também calculada (PFc) a partir dos valores do consumo (direto) e da DIVMS e foi estimada pela relação do indicador administrado/indicador excretado. Foram observadas diferenças entre os CMS obtidos nas três idades de corte do capim-elefante pelos dois métodos avaliados. Os CMS médios obtidos pelo método direto foram de 8,00; 10,00 e 11,02 kg/vaca/dia, respectivamente, para o capim cortado com 30, 45 e 60 dias. Os CMS estimados com auxílio do Cr2O3 foram de 9,00; 11,10 e 12,00 kg/vaca/dia, para os mesmos tratamentos. As estimativas de consumo utilizando o Cr2O3 foram superestimadas em 9,25% em relação aos resultados obtidos pelo método direto.

Periodic inspection on crop sprayers: Results according to age of sprayers

The objectives of the IPP Project-Periodic Inspection on Crop Sprayers-are to develop methods for sprayer certification, analyze quality on spray operation, propose an inspection system for crop sprayers in Brazil, improve environmental quality on spray operation, and reduce costs on chemical control for plant protection systems. Periodic inspections on crop sprayers are performed in several countries and are compulsory in most of them, and it is becoming an important tool for improvement and optimization of use of chemicals. The IPP Project in Brazil is funded by FAPESP-Fundação de Amparo a Pesquisa do Estado de São Paulo. The results so far showed that all the sprayers presented failures. However, most of them could be approved with minor services. As an example, 56.6% of the sprayers with more than 2 years of use presented leaks, 47% of them had damaged hoses and 80.5% presented bad tips (nozzles). These results indicate the need for better procedures of use and maintenance of sprayers, justifying the periodic inspection system.

Uma fonte chaveada de 50kW com correção de fator de potência para alimentação de uma tocha de plasma Indutiva utilizando técnicas de controle digital

This work deals with the development of an experimental study on a power supply of high frequency that provides the toch plasmica to be implemented in PLASPETRO project, which consists of two static converters developed by using Insulated Gate Bipolar Transistor (IGBT). The drivers used to control these keys are triggered by Digital Signal Processor (DSP) through optical fibers to reduce problems with electromagnetic interference (EMI). The first stage consists of a pre-regulator in the form of an AC to DC converter with three-phase boost power factor correction which is the main theme of this work, while the second is the source of high frequency itself. A series-resonant inverter consists of four (4) cell inverters operating in a frequency around 115 kHz each one in soft switching mode, alternating itself to supply the load (plasma torch) an alternating current with a frequency of 450 kHz. The first stage has the function of providing the series-resonant inverter a DC voltage, with the value controlled from the power supply provided by the electrical system of the utility, and correct the power factor of the system as a whole. This level of DC bus voltage at the output of the first stage will be used to control the power transferred by the inverter to the load, and it may vary from 550 VDC to a maximum of 800 VDC. To control the voltage level of DC bus driver used a proportional integral (PI) controller and to achieve the unity power factor it was used two other proportional integral currents controllers. Computational simulations were performed to assist in sizing and forecasting performance. All the control and communications needed to stage supervisory were implemented on a DSP

Sistema de tração elétrica flexível baseado em veículos trólebus para alimentação com redes CC e ou CA

Este artigo apresenta os principais resultados e o detalhamento da metodologia e equações de controle de um retificador monofásico pré-regulador de 150kW para sistema trólebus. A estrutura proposta possibilita a Correção ativa do Fator de Potência (CFP) com baixos níveis de Distorção Harmônica Total (DHT) na corrente, em conformidade com a norma internacional IEC 61000-3-4. Fruto de um projeto de Pesquisa, Desenvolvimento e Inovação (P) junto à empresa AES Eletropaulo Metropolitana de São Paulo, em parceria com a empresa de transporte Himalaia S.A., o projeto possui como principais objetivos estimular o interesse para a expansão das linhas de trólebus a partir de uma plataforma de alimentação de menor custo de instalação e manutenção, sem a necessidade de subestações retificadoras, e, com vistas a promover a melhoria da qualidade de vida nos grandes centros urbanos. Nessa nova modalidade proposta para o sistema de alimentação, o trólebus pode ser alimentado tanto pelas redes convencionais em corrente contínua (CC) quanto pelas redes de distribuição em corrente alternada (CA), mantendo-se a disposição a dois fios dos sistemas CC, sendo as mudanças de rede de alimentação (CC ou CA) monitoradas e controladas digitalmente. Todo o sistema de gerenciamento e controle do conversor é realizado digitalmente por FPGA XC3S200. Na evolução do sistema proposto, os autores pretendem inclusive eliminar as linhas aéreas de alimentação, através da utilização de postos de alimentação em CA, especialmente desenvolvidos para os pontos de embarque/desembarque de passageiros para este veículo de transporte coletivo, eliminando-se os aspectos visuais negativos das redes de alimentação deste modal, e, reduzindo-se as falhas de operação do sistema.

Power Factor Correction Boost Converter Based on the Three-State Switching Cell

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estratégia anestesiológica para cesariana em paciente portadora de deficiência de fator XI: relato de caso

JUSTIFICATIVA E OBJETIVOS: A deficiência do fator XI é uma doença hematológica rara na população. A hemofilia C (deficiência do fator XI) ocorre em ambos os sexos e normalmente não apresenta qualquer sintomatologia, podendo manifestar-se apenas como hemorragia pós-cirúrgica. É uma doença autossômica recessiva, homozigótica ou heterozigótica, e sua gravidade depende dos níveis de fator XI. O objetivo desse relato foi apresentar a estratégia anestésica em paciente portadora de hemofilia C. RELATO do CASO: Paciente com 32 anos, gesta I/para 0, 39 semanas de gestação programada para cesariana eletiva. Paciente portadora de deficiência de fator XI. Exame clínico e laboratorial sem alterações. Conforme orientação do hematologista, no dia da cesárea a paciente usou prometazina 25 mg; hidrocortisona 500 mg, devido a reações transfusionais prévias, e plasma 10 mL-1.kg-1 num total de 700 mL. Após 2 horas foi submetida ao bloqueio subaracnóideo sob monitorização de rotina. Hidratação com RL 2000 mL. Procedimento anestésico-cirúrgico sem intercorrências. A paciente evoluiu no pós-operatório sem intercorrências, sendo que no 3º DPO fez uso de plasma fresco congelado (PFC) 10.mL-1.kg-1 com o objetivo de evitar sangramento pós cirúrgico tardio. CONCLUSÕES: O objetivo do caso foi apresentar o protocolo anestésico para pacientes portadores de hemofilia C e alertar para a necessidade de investigação em caso de antecedente de sangramento pós-operatório, quando um estudo da coagulação deve ser realizado antes de qualquer procedimento invasivo e, se um TTPA prolongado for encontrado, torna-se imperativo pesquisar a deficiência desse fator.

Cyto-, myelo- and chemoarchitecture of the prefrontal cortex of the Cebus monkey

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of aquatic plants in the reservoirs of AES-Tiete and development of an integrated control model for the most important species

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tiete as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promissao, and Nova-Avanhandava, located in the Tiete River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Guacu reservoir, which belongs to the Mogi-Guacu River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move floating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.

Eucalyptus ESTs related to genes for oxidative stress

Oxidative stress generating active oxygen species has been proved to be one of the underlying agents causing tissue injury after the exposure of Eucalyptus (Eucalyptus spp.) plants to a wide variety of stress conditions. The objective of this study was to perform data mining to identify favorable genes and alleles associated with the enzyme systems superoxide dismutase, catalase, peroxidases, and glutathione S-transferase that are related to tolerance for environmental stresses and damage caused by pests, diseases, herbicides, and by weeds themselves. This was undertaken by using the eucalyptus expressed-sequence database (https//forests.esalq.usp.br). The alignment results between amino acid and nucleotide sequences indicated that the studied enzymes were adequately represented in the ESTs database of the FORESTs project.

Performance evaluation of a novel hybrid multipulse rectifier for utility interface of power electronic converters

This paper presents an improved analysis of a novel Programmable Power-factor-corrected-Based Hybrid Multipulse Power Rectifier (PFC-HMPR) for utility interface of power electronic converters. The proposed hybrid multipulse rectifier is composed of an ordinary three-phase six-pulse diode-bridge rectifier (Graetz bridge) with a parallel connection of single-phase switched converters in each three-phase rectifier leg. In this paper, the authors present a complete discussion about the controlled rectifiers' power contribution and also a complete analysis concerning the total harmonic distortion of current that can be achieved when the proposed converter operates as a conventional 12-pulse rectifier. The mathematical analysis presented in this paper corroborate, with detailed equations, the experimental results of two 6-kW prototypes implemented in a laboratory.

Effects of hand weeding strip and nitrogen fertilizer on corn plants

The objective of the present research was to evaluate effects of different strip weed control associated with nitrogen fertilizer on corn applied after planting. The experiment was set and conducted in Botucatu, São Paulo State, Brazil, and the hybrid planted was Dekalb 333-B. A completely randomized block design with four replications was used. Experimental plots were disposed as a factorial scheme 2 x 2 x 4, constituted by two types of weeding on row (with or without manual hoeing), two types of weeding on inter-row (with or without manual hoeing), and four nitrogen levels applied after planting (00, 60, 90, and 120 kg ha-1). Plots were composed by six rows with 5 m length. Nitrogen fertilizer was applied at 35 days after emergence (d.a.e). For weed community it was evaluated: weed density, dominancy, frequency, and relative importance. The main weed species were: Brachiaria plantiginea, Amaranthus retroflexus, Bidens pilosa, Cyperus rotunds, Brachiaria decumbens, Euphorbia heterofila, Oxalis latifolia, Acanthospermum hispidum, Commelina benghalensis. It was evaluated corn height at 40 and 100 d.a.e., first ear insertion height at 100 d.a.e., and final grain yield at harvesting. Plants and first ear insertion height were affected when nitrogen fertilizer was not applied. Treatments without weed control showed that weed interfered negatively with plants height. There were no correlation between weeds and nitrogen fertilizer for all parameters evaluated. Parcels without weed showed the highest ear weights and final grain production. Treatments that received nitrogen fertilizer, independently of studied arrangement, provided higher yields.

Absorption and translocation of 2,4-D in plants of Memora peregrina

The objective of this work was to evaluate absorption and translocation of the herbicide 2,4-D in plants of Memora peregrina. The herbicide 2,4-D was used alone with the formulation DMA 806 BR and associated with the herbicide picloram in the commercial product Padron. Levels of radioactivity on the treated leaves were determined in sample obtained after washing them with methanol and chloroform at different times after the application of the radiolabelled formulation (1, 2, 4, 8, 24, and 48 h). Translocation was evaluated by cutting plants between stem and root. The parts obtained were: root, stem, leaf treated, leaves above the leaf treated, leaves below the leaf treated, and leaf opposite of the leaf treated. These parts were weighted, dried, ground, burnt, and radioactivity in the samples was determined. The results suggest that the translocation of the radioactive herbicide 2,4-D was insignificant in plants of M. peregrina in the two treatments evaluated. Absorption of 14C 2,4-D in the treatment with DMA 806 BR and the mixture of DMA 806 BR plus Padron had the same behavior. These observations explain the inefficient control obtained with this herbicide in plant species under study.

Deposition and leaching of tebuthiuron on sugar cane straw applied with and without alkyl polyglycoside adjuvant

A laboratory experiment was carried out aiming to study the effects of an alkyl polyglycoside adjuvant (APG) on deposition and leaching of the herbicide tebuthiuron applied on sugar cane straw. Tebuthiuron, at concentration of 1200 mg L-1, was applied separately and in tank mix with the APG adjuvant, at concentrations of 0.07 and 0.09% (wt v-1), using a spraying volume of 204 L ha-1. A precipitation equivalent to 20 mm of rain was simulated, 24 h after the applications, to evaluate the herbicide leaching. The quantification of tebuthiuron was carried out by the high performance liquid chromatography (HPLC). It was observed that the addition of APG adjuvant at 0.07% (wt v-1) provided an increase of 11.5% in the deposition of tebuthiuron on straw, reduction of 50.4% in the drift of the herbicide and it did not affect significantly the leached amount (68.5%), when compared with the treatment where tebuthiuron was applied alone (70.8%). At the concentration of 0.09% (wt v-1), the APG adjuvant caused an increase of 22.7% in the deposition; it reduced the drift of the herbicide by 99.9% and reduced the leached amount by 7.6% thereby increasing the retention of the herbicide by straw.

A true programmable HPF hybrid three-phase rectifier

In this paper is proposed and analyzed a digital hysteresis modulation using a FPGA (Field Programmable Gate Array) device and VHDL (Hardware Description Language), applied at a hybrid three-phase rectifier with almost unitary input power factor, composed by parallel SEPIC controlled single-phase rectifiers connected to each leg of a standard 6-pulses uncontrolled diode rectifier. The digital control allows a programmable THD (Total Harmonic Distortion) at the input currents, and it makes possible that the power rating of the switching-mode converters, connected in parallel, can be a small fraction of the total average output power, in order to obtain a compact converter, reduced input current THD and almost unitary input power factor. The proposed digital control, using a FPGA device and VHDL, offers an important flexibility for the associated control technique, in order to obtain a programmable PFC (Power Factor Correction) hybrid three-phase rectifier, in agreement with the international standards (IEC, and IEEE), which impose limits for the THD of the AC (Alternate Current) line input currents. Finally, the proposed control strategy is verified through experimental results from an implemented prototype. ©2008 IEEE.