Atividade antimicrobiana in vitro de extrato de Punica granatum L. sobre staphylococcus aureus isolado em leite bovino

Bovine mastitis is considered important disease causing major economic losses in dairy herds. Antimicrobial drug can promote resistance, chemical residues in food and environmental contamination. The purpose of this study was to evaluate the antibacterial activity in vitro of pomegranate extract on Staphylococcus aureus isolated from bovine milk, evaluate its antioxidant activity, and quantify levels of total phenols and fravonoides of the different extracts used. Aqueous extracts were used in nature and dry, from the peel of the fruit (EAC) and leaves (EAF). Additionally, it was evaluated the antioxidant activity (AA%), total phenols and flavonoids. Milk samples were inoculated, incubated, and the colonies were characterized as Staphylococcus aureus were adjusted to 1.0x106 UFC/mL in the 6 standard of the MacFarland scale. The sensitivity of the microbial isolates were determined in quintuplicate, in disk diffusion test. The minimum inhibitory concentration was determined by visible inhibition zone greater than 15mm. The results were evaluated by ANOVA, Tukey 5%, using the program SISVAR 5.3 - DEX/UFLA. Results implied that the aqueous extract from the bark of dried fruit was capable of inhibiting bacterial growth at concentrations of 3%. The other treatments only showed this activity, from the concentrations of 15%, 20% and 30% for dry EAF, in nature EAC and in nature EAF, respectively. Regarding the action antioxidant of dry EAC, was not correlated with total phenols and flavonoids. Probably other alkaloids substances present in the extract studied, may have been responsible for this activity. It is concluded that extracts of Punica granatum L., especially those obtained by the shell of the fruit, showed inhibitory activity against S. aureus, indicating your use potential for the control of bovine mastitis.

Growth of calcium phosphate coating on Ti-7.5Mo alloy after anodic oxidation

Titanium and its alloys are widely used as biomaterials due to their mechanical, chemical and biological properties. To enhance the biocompatibility of titanium alloys, various surface treatments have been proposed. In particular, the formation of titanium oxide nanotubes layers has been extensively examined. Among the various materials for implants, calcium phosphates and hydroxyapatite are widely used clinically. In this work, titanium nanotubes were fabricated on the surface of Ti-7.5Mo alloy by anodization. The samples were anodized for 20 V in an electrolyte containing glycerol in combination with ammonium fluoride (NH4F, 0.25%), and the anodization time was 24 h. After being anodized, specimens were heat treated at 450 °C and 600°C for 1 h to crystallize the amorphous TiO2 nanotubes and then treated with NaOH solution to make them bioactive, to induce growth of calcium phosphate in a simulated body fluid. Surface morphology and coating chemistry were obtained respectively using, field-emission scanning electron microscopy (FEG-SEM), AFM and X-ray diffraction (XRD). It was shown that the presence of titanium nanotubes induces the growth of a sodium titanate nanolayer. During the subsequent invitro immersion in a simulated body fluid, the sodium titanate nanolayer induced the nucleation and growth of nano-dimensioned calcium phosphate. It was possible to observe the formation of TiO2 nanotubes on the surface of Ti-7.5Mo. Calcium phosphate coating was greater in the samples with larger nanotube diameter. These findings represent a simple surface treatment for Ti-7.5Mo alloy that has high potential for biomedical applications. © (2013) Trans Tech Publications, Switzerland.

Combining anisotropic diffusion, transport equation and texture synthesis for inpainting textured images

In this work we propose a new image inpainting technique that combines texture synthesis, anisotropic diffusion, transport equation and a new sampling mechanism designed to alleviate the computational burden of the inpainting process. Given an image to be inpainted, anisotropic diffusion is initially applied to generate a cartoon image. A block-based inpainting approach is then applied so that to combine the cartoon image and a measure based on transport equation that dictates the priority on which pixels are filled. A sampling region is then defined dynamically so as to hold the propagation of the edges towards image structures while avoiding unnecessary searches during the completion process. Finally, a cartoon-based metric is computed to measure likeness between target and candidate blocks. Experimental results and comparisons against existing techniques attest the good performance and flexibility of our technique when dealing with real and synthetic images. © 2013 Elsevier B.V. All rights reserved.

Desidratação osmótica da manga cv. Palmer em solução de sacarose com e sem adição de ácido ascórbico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cinética de secagem de abóboras (Curcubita moschata) pré-tratadas osmoticamente em soluções contendo sacarose

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da desidratação de mamão utilizando métodos combinados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desidratação osmótica e secagem de maçãs: I. Comportamento do tecido em soluções osmóticas. II. Modelagem matemática de difusão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

ICT adoption and diffusion patterns in Latin American agriculture

Includes bibliography

Influência de variáveis de processo sobre a cinética de secagem de abóbora (Cucurbita moschata)

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Comparison of shear bond strength of orthodontics brackets on composite resin restorations with different surface treatments

INTRODUÇÃO: frequentemente, os pacientes ortodônticos apresentam restaurações de resina composta; no entanto, existem poucos estudos que avaliam a melhor forma de colagem ortodôntica nessa situação. OBJETIVO: o objetivo do presente trabalho foi avaliar a força adesiva de braquetes ortodônticos em restaurações resinosas com tratamento de superfície. MÉTODOS: foram utilizados 51 incisivos inferiores bovinos divididos aleatoriamente em três grupos. No grupo controle (GC), os braquetes foram colados em esmalte dentário; nos grupos experimentais com tratamento (GCT) e sem tratamento (GST), os braquetes foram colados em restauração de resina previamente realizada, diferenciando-se pelo tratamento de superfície com broca diamantada. Os dentes foram incluídos em tubos de PVC com resina acrílica autopolimerizável. O ensaio de cisalhamento foi executado em máquina universal de ensaios Emic. Os grupos foram submetidos à ANOVA com pós-teste de Tukey para verificação da diferença estatística entre os grupos (α = 0,05). RESULTADOS: GC (6,62MPa) e GCT (6,82MPa) apresentaram resultados semelhantes, enquanto o GST (5,07MPa) obteve resultados estatisticamente menores (p < 0,05). CONCLUSÃO: conclui-se que a melhor técnica de colagem de braquetes ortodônticos em restaurações de resina composta é a de realização de desgaste sobre a superfície.

Modificação da superfície de óxidos de ferro por dextrana derivatizada para aplicações em liberação de fármaco

Pós-graduação em Química - IQ

Stabilization of dentin matrix after cross-linking treatments, in vitro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efficacy of Surface Treatments on the Bond Strength of Resin Cements to Two Brands of Zirconia Ceramic

Purpose: To compare the shear bond strength (SBS) of two cements to two Y-TZP ceramics subjected to different surface treatments.Materials and Methods: Zirconia specimens were made from Lava (n = 36) and IPS e.max ZirCAD (n = 36), and their surfaces were treated as follows: no treatment (control), silica coating with 30-mu m silica-modified alumina (Al2O3) particles (CoJet Sand), or coating with liners Lava Ceram for Lava and Intensive ZirLiner for IPS e.max ZirCAD. Composite resin cylinders were bonded to zirconia with Panavia F or RelyX Unicem resin cements. All specimens were thermocycled (6000 cycles at 5 degrees C/55 degrees C) and subjected to SBS testing. Data were analyzed by post-hoc test Tamhane T2 and Scheffe tests (alpha = 0.05). Failure mode was analyzed by stereomicroscope and SEM.Results: With both zirconia brands, CoJet Sand showed significantly higher SBS values than control groups only when used with RelyX Unicem (p = 0.0001). Surface treatment with liners gave higher SBS than control groups with both ceramic brands and cements (p < 0.001). With both zirconia brands, the highest SBS values were obtained with the CoJet and RelyX Unicem combination (> 13.47 MPa). Panavia F cement showed significantly better results when coupled with liner surface treatment rather than with CoJet (p = 0.0001, SBS > 12.23 MPa). In untreated controls, Panavia F showed higher bond strength than RelyX Unicem; the difference was significant (p = 0.016) in IPS e.max ZirCAD. The nontreated specimens and those treated with CoJet Sand exhibited a high percentage of adhesive and mixed A (primarily adhesive) failures, while the specimens treated with liners presented an increase in mixed A and mixed C (primarily cohesive) failures as well as some cohesive failure in the bulk of Lava Ceram for both cements.Conclusion: CoJet Sand and liner application effectively improved the SBS between zirconia and luting cements. This study suggests that different interactions between surface treatments and luting cements yield different SBS: in clinical practice, these interactions should be considered when combining luting cements with surface treatments in order to obtain the maximum bond strength to zirconia restorations.