Long-term recovery patterns of arctic tundra after winter seismic exploration

In response to the increasing global demand for energy, oil exploration and development are expanding into frontier areas of the Arctic, where slow-growing tundra vegetation and the underlying permafrost soils are very sensitive to disturbance. The creation of vehicle trails on the tundra from seismic exploration for oil has accelerated in the past decade, and the cumulative impact represents a geographic footprint that covers a greater extent of Alaska’s North Slope tundra than all other direct human impacts combined. Seismic exploration for oil and gas was conducted on the coastal plain of the Arctic National Wildlife Refuge, Alaska, USA, in the winters of 1984 and 1985. This study documents recovery of vegetation and permafrost soils over a two-decade period after vehicle traffic on snow-covered tundra. Paired permanent vegetation plots (disturbed vs. reference) were monitored six times from 1984 to 2002. Data were collected on percent vegetative cover by plant species and on soil and ground ice characteristics. We developed Bayesian hierarchical models, with temporally and spatially autocorrelated errors, to analyze the effects of vegetation type and initial disturbance levels on recovery patterns of the different plant growth forms as well as soil thaw depth. Plant community composition was altered on the trails by species-specific responses to initial disturbance and subsequent changes in substrate. Long-term changes included increased cover of graminoids and decreased cover of evergreen shrubs and mosses. Trails with low levels of initial disturbance usually improved well over time, whereas those with medium to high levels of initial disturbance recovered slowly. Trails on ice-poor, gravel substrates of riparian areas recovered better than those on ice-rich loamy soils of the uplands, even after severe initial damage. Recovery to pre-disturbance communities was not possible where trail subsidence occurred due to thawing of ground ice. Previous studies of disturbance from winter seismic vehicles in the Arctic predicted short-term and mostly aesthetic impacts, but we found that severe impacts to tundra vegetation persisted for two decades after disturbance under some conditions. We recommend management approaches that should be used to prevent persistent tundra damage.

SEASONAL, HABITAT AND SEX-SPECIFIC PATTERNS OF FOOD UTILIZATION BY RED-WINGED BLACKBIRDS (Agelaius phoeniceous) IN EASTERN ONTARIO AND THEIR ECONOMIC IMPORTANCE

Crop depredation by red-winged blackbirds (Agelaius phoeniceus) causes serious economic losses to agricultural crops each year in both Canada and the United States. The concentration of vulnerable, monocultural crops, particularly corn, during periods when large flocks of blackbirds congregate in roosting areas prior to migration has invariably led to heavy feeding pressure (Stone et al., 1972; Wiens and Dyer, 1975; Tyler et al., 1978). Efforts to reduce damage levels by mechanical and chemical dispersal agents have been largely unsuccessful, at least in terms of a long-term solution to the problem. Recently, the lethal control of blackbird populations using surfactants has been proposed. However, the potential repercussions of the removal of substantial numbers of birds from northern breeding areas are virtually unknown (Robertson et al., 1978). Much of the research dealing with the feeding ecology of red-winged blackbirds has been limited to fall and winter periods when large aggregations of birds are actively involved in crop depredation (Goddad, 1969; Williams, 1976; Dolbeer et al., 1978) or pose a potential health hazard (Monroe and Cronholm, 1976). However, what is not known is the degree to which the removal of deleterious weed seed and insect pests cited in several studies (Bird and Smith, 1964; Mott et al., 1972; Robertson et al., 1978) might be of potential value to agriculture. The issue of whether the benefits derived from redwing foraging compensate for the negative aspects associated with crop depredation and health hazards remains largely unresolved. The present study attempted to evaluate the pest status of this species using diet information derived from food habits analysis conducted during the residency of red- winged blackbirds in a northern breeding area. By determining how the feeding ecology of red-winged blackbirds varies on a seasonal basis, among different breeding habitats and between sexes, we hoped to determine more realistically which segments of the population might be responsible for the greatest benefits or detriments and, thereby, more accurately evaluate the economic impact of the species as a whole. To achieve this aim, the study provides an accurate description of the common insects and weed pests utilized by redwings. By determining the relative proportions of those items known to be detrimental, we hoped to illustrate, at least qualitatively, the degree to which redwing foraging is comprised of both beneficial and harmful components.

Are the preference and selection patterns of hermit crabs for gastropod shells species- or site-specific?

Experimental analyses of hermit crabs and their preferences for shells are essential to understand the intrinsic relationship of the crabs` dependence on shells, and may be useful to explain their shell use pattern in nature. The aim of this study was to evaluate the effect of crab species and site on the pattern of shell use, selection, and preference in the south-western Atlantic hermit crabs Pagurus brevidactylus and Pagurus criniticornis, comparing sympatric and allopatric populations. Differently from the traditional approach to evaluate shell preference by simply determining the shell selection pattern (i.e., the number of shells of each type selected), preference was defined (according to [Liszka, D., Underwood, AJ., 1990. An experimental design to determine preferences for gastropod shells by a hermit-crab. J. Exp. Mar. Biol. Ecol., 137(1), 47-62]) by the comparison of the number of crabs changing for a particular shell type when three options were given (Cerithium atratum, Morula nodulosa, and Tegula viridula) with the number of crabs changing for this same type when only this type was offered. The effect of crab species was tested at Cabelo Gordo Beach, where P. brevidacrylus was found occupying shells of C. atratum, M. nodulosa, and T viridula in similar frequencies, whereas P. criniticornis occupied predominantly shells of C atratum. In laboratory experiments the selection patterns of the two hermit-crab species for these three gastropods were different, with P criniticornis selecting mainly shells of C atratum, and R brevidactylus selecting more shells of M. nodulosa. The shell preference was also dependent on crab species, with P. criniticornis showing a clear preference for shells of C atratum, whereas P. brevidactylus did not show a preference for any of the tested shells. The effect of site was tested for the two species comparing data from Cabelo Gordo to Preta (P brevidactylus) and Araca beaches (P. criniticornis). The pattern of shell use, selection, and preference was demonstrated to be dependent on site only for P. brevidactylus. The results also showed that the shell use pattern of P criniticornis can be explained by its preference at both sites, whereas for P. brevidactylus it occurred only at Cabelo Gordo, where the absence of preference was correlated with the similar use of the three gastropod species studied. Finally, the results showed that the shell selection pattern cannot be considered as a measure of shell preference, since it overestimates crab selectivity. (C) 2009 Elsevier B.V. All rights reserved.

Spatial and temporal patterns in size and maturation of Loligo plei and Loligo sanpaulensis (Cephalopoda: Loliginidae) in southeastern Brazilian waters, between 23 degrees S and 27 degrees S

Patterns of population dynamics of Loligo plei and Loligo sanpaidensis in Southeastern Brazil were investigated with samples obtained from commercial catches and research cruises from 1999 to 2000 and from 2002 to 2003. Size and maturity Structure of the two species varied according to depth and season. Body size decreased with depth for L plei, whereas for L. sanpaidensis size increased with depth LIP to 100 m and decreased again in deeper areas. GSI and incidence of mature animals decreased with depth in both species. L. plei females matured at a larger size in summer, while size at maturity in L. sanpaulensis was greater in autumn. For L. plei, reproductive events Occurred in the late winter and spring, in depths up to 40 m, and during summer in inshore waters. L. sanpaidensis increased reproductive activity ill Summer, winter and spring between depths of 30 and 80 Ill. The presence of high proportions of immature Squid offshore Suggests that juveniles might develop in these areas and, upon maturation, migrate back to inshore waters to spawn, particularly in spring and Summer. However, differences found in aggregation patterns in different depth strata, as well as the seasonal differences found in the size structure of L. plei and L. sanpaidensis, Could ultimately be due to Changes in the water Column related to food availability. Considering that L. plei and L. sanpaidensis are both caught as by-catch by shrimp trawlers throughout file year, we also discuss hypotheses on the life cycle of the species and its implications for fishery management. We recommend measures to protect squid spawning grounds by creating spring and summer protected areas where trawling would be prohibited until 60 m depth, i.e. in the area and time of year when mature individuals concentrate.

Morphological patterns and community organization in leaf-litter ant assemblages

We present a new approach to determine the number and composition of guilds, using the hyperdiverse leaf-litter ant fauna as a model, based on appropriate morphological variables and species co-occurrence null models to describe the complex assemblages of interacting Species Community structure at the 1-m(2) scale. We obtained 18 linear morphometric measures from 949 workers of 171 leaf-litter ant species (18762 measurements) surveyed in four Atlantic Forest localities to test whether the assemblages are morphologically structured; the morphological characters were selected to indicate diet and foraging habits. Principal components analysis was used to characterize the morphospace and to describe the guild structure (number of species and composition). The guild proportionality assembly rule (significant tendency toward constant proportion of species in guilds) was assessed at the 1-m(2) scale. Our analysis indicates that the division of leaf-litter ants into guilds is based mainly on microhabitat distribution in the leaf-litter, body size and shape, eye size, and phylogeny. The same guild scheme applied to four more sites shows that different Atlantic Forest areas have the same leaf-fitter ant guilds. The guild proportionality assembly rule was confirmed for most guilds, Suggesting that there are guild-specific limitations on species coexistence within assemblages; on the other hand, in a few cases the variance in guild proportion was greater than expected under the null assumptions. Other studies on ant functional group classification are partially supported by our quantitative morphological analysis. Our results, however, imply that there are more compartments than indicated in previous models, particularly among cryptic species (confined to soil and litter) and tropical climate specialists. We argue that a general null model for the analysis of species association based oil morphology can reveal objectively defined groups and may thus contribute to a robust theory to explain community structure in general and have important consequences on studies of litter ant community ecology in particular.

Investigating South American biogeographic history using patterns of skull shape variation on Cerdocyon thous (Mammalia: Canidae)

Patterns of geographic variation of the canid Cerdocyon thous have historically been obscured by its remarkable intraspecific morphological variability. The observed distribution is highly associated with phytophysiognomy, a feature considered highly dynamic along geological time. In the present study, we tested whether vegetation distribution during the Holocene Glacial Maximum of South America (HGM) explains the patterns of morphological variation within Cerdocyon thous. The species was divided in groups according to paleohabitats that could support their presence during the HGM, and then tested for differences in skull morphometrics. The results obtained demonstrate that the climatic changes during the HGM influenced the population structure of this species, resulting in the establishment of geographical groups with different degrees of morphological cohesion. Higher morphological cohesion found in the Northern group might be explained by the marked discontinuity between its geographical range and the rest of the species`distribution. The Eastern and Southern morphological divergence is less striking and, although this could be related to past vegetation distribution, the disappearance of those barriers leads to a population structure that could be slowly breaking down. (C) 2009 The Linnean Society of London, Biological Journal of the Linnean Society, 2009, 98, 77-84.

Attenuation of foot pressure during running on four different surfaces: asphalt, concrete, rubber, and natural grass

The practice of running has consistently increased worldwide, and with it, related lower limb injuries. The type of running surface has been associated with running injury etiology, in addition other factors, such as the relationship between the amount and intensity of training. There is still controversy in the literature regarding the biomechanical effects of different types of running surfaces on foot-floor interaction. The aim of this study was to investigate the influence of running on asphalt, concrete, natural grass, and rubber on in-shoe pressure patterns in adult recreational runners. Forty-seven adult recreational runners ran twice for 40 m on all four different surfaces at 12 +/- 5% km . h(-1). Peak pressure, pressure-time integral, and contact time were recorded by Pedar X insoles. Asphalt and concrete were similar for all plantar variables and pressure zones. Running on grass produced peak pressures 9.3% to 16.6% lower (P < 0.001) than the other surfaces in the rearfoot and 4.7% to 12.3% (P < 0.05) lower in the forefoot. The contact time on rubber was greater than on concrete for the rearfoot and midfoot. The behaviour of rubber was similar to that obtained for the rigid surfaces - concrete and asphalt - possibly because of its time of usage (five years). Running on natural grass attenuates in-shoe plantar pressures in recreational runners. If a runner controls the amount and intensity of practice, running on grass may reduce the total stress on the musculoskeletal system compared with the total musculoskeletal stress when running on more rigid surfaces, such as asphalt and concrete.

Analysis of plant LTR-retrotransposons at the fine-scale family level reveals individual molecular patterns

Background: Sugarcane is an important crop worldwide for sugar production and increasingly, as a renewable energy source. Modern cultivars have polyploid, large complex genomes, with highly unequal contributions from ancestral genomes. Long Terminal Repeat retrotransposons (LTR-RTs) are the single largest components of most plant genomes and can substantially impact the genome in many ways. It is therefore crucial to understand their contribution to the genome and transcriptome, however a detailed study of LTR-RTs in sugarcane has not been previously carried out. Results: Sixty complete LTR-RT elements were classified into 35 families within four Copia and three Gypsy lineages. Structurally, within lineages elements were similar, between lineages there were large size differences. FISH analysis resulted in the expected pattern of Gypsy/heterochromatin, Copia/euchromatin, but in two lineages there was localized clustering on some chromosomes. Analysis of related ESTs and RT-PCR showed transcriptional variation between tissues and families. Four distinct patterns were observed in sRNA mapping, the most unusual of which was that of Ale1, with very large numbers of 24nt sRNAs in the coding region. The results presented support the conclusion that distinct small RNA-regulated pathways in sugarcane target the lineages of LTR-RT elements. Conclusions: Individual LTR-RT sugarcane families have distinct structures, and transcriptional and regulatory signatures. Our results indicate that in sugarcane individual LTR-RT families have distinct behaviors and can potentially impact the genome in diverse ways. For instance, these transposable elements may affect nearby genes by generating a diverse set of small RNA's that trigger gene silencing mechanisms. There is also some evidence that ancestral genomes contribute significantly different element numbers from particular LTR-RT lineages to the modern sugarcane cultivar genome.

Correlation between mandibular gland secretion and cuticular hydrocarbons in the stingless bee Melipona quadrifasciata

We investigated whether Melipona quadrifasciata worker mandibular gland secretions contribute directly to their cuticular hydrocarbon profile. The mandibular gland secretion composition and cuticular surface compounds of newly emerged worker bees, nurse bees, and foragers were determined by gas chromatography and mass spectrometry and compared. Both the mandibular gland secretions and the cuticular surface compounds of all worker stages were found to be composed almost exclusively of hydrocarbons. Although the relative proportion of hydrocarbons from the cuticular surface and gland secretion was statistically different, there was a high similarity in the qualitative composition between these structures in all groups of bees.

Variable patterns of Y chromosome homology in Akodontini rodents (Sigmodontinae): a phylogenetic signal revealed by chromosome painting

The Akodontini is the second most speciose tribe of sigmodontine rodents, one of the most diverse groups of neotropical mammals. Molecular phylogenetic analyses are discordant regarding the interrelationships of genera, with low support for some clades. However, two clades are concordant, one (clade A) with Akodon sensu strictu (excluding Akodon serrensis), "Akodon" serrensis, Bibimys, Deltamys, Juscelinomys, Necromys, Oxymycterus, Podoxymys, Thalpomys and Thaptomys, and another (clade B) with Blarinomys, Brucepattersonius, Kunsia, Lenoxus and Scapteromys. Here, we present chromosome painting using Akodon paranaensis (APA) Y paint, after suppression of simple repetitive sequences, on ten Akodontini genera. Partial Y chromosome homology, in addition to the homology already reported on the Akodon genus, was detected on the Y chromosomes of "A." serrensis, Thaptomys, Deltamys, Necromys and Thalpomys and on Y and X chromosomes in Oxymycterus. In Blarinomys, Brucepattersonius, Scapteromys and Kunsia, no APA Y signal was observed using different hybridization conditions; APA X paint gave positive signals only on the X chromosome in all genera. The Y chromosome homology was variable in size and positioning among the species studied as follow: (1) whole acrocentric Y chromosome in Akodon and "A." serrensis, (2) Yp and pericentromeric region in submetacentric Y of Necromys and Thaptomys, (3) pericentromeric region in acrocentric Y of Deltamys, (4) distal Yq in the acrocentric Y chromosome of Thalpomys and (5) proximal Yq in the acrocentric Y and Xp in the basal clade A genus Oxymycterus. The results suggest that the homology involves pairing (pseudoautosomal) and additional regions that have undergone rearrangement during divergence. The widespread Y homology represents a phylogenetic signal in Akodontini that provides additional evidence supporting the monophyly of clade A. The findings also raise questions about the evolution of the pseudoautosomal region observed in Oxymycterus. The Y chromosomes of these closely related species seem to have undergone dynamic rearrangements, including restructuring and reduction of homologous segments. Furthermore, the changes observed may indicate progressive attrition of the Y chromosome in more distantly related species.

Spatio-temporal patterns of tuberculosis incidence in Ribeirao Preto, State of Sao Paulo, southeast Brazil, and their relationship with social vulnerability: a Bayesian analysis

Introduction: The purpose of this ecological study was to evaluate the urban spatial and temporal distribution of tuberculosis (TB) in Ribeirao Preto, State of Sao Paulo, southeast Brazil, between 2006 and 2009 and to evaluate its relationship with factors of social vulnerability such as income and education level. Methods: We evaluated data from TBWeb, an electronic notification system for TB cases. Measures of social vulnerability were obtained from the SEADE Foundation, and information about the number of inhabitants, education and income of the households were obtained from Brazilian Institute of Geography and Statistics. Statistical analyses were conducted by a Bayesian regression model assuming a Poisson distribution for the observed new cases of TB in each area. A conditional autoregressive structure was used for the spatial covariance structure. Results: The Bayesian model confirmed the spatial heterogeneity of TB distribution in Ribeirao Preto, identifying areas with elevated risk and the effects of social vulnerability on the disease. We demonstrated that the rate of TB was correlated with the measures of income, education and social vulnerability. However, we observed areas with low vulnerability and high education and income, but with high estimated TB rates. Conclusions: The study identified areas with different risks for TB, given that the public health system deals with the characteristics of each region individually and prioritizes those that present a higher propensity to risk of TB. Complex relationships may exist between TB incidence and a wide range of environmental and intrinsic factors, which need to be studied in future research.

Shear bond strength between different materials bonded with two resin cements

Background: The aim of this study was to compare the shear bond strength between Ni-Cr alloy specimens bonded to air-abraded Ni-Cr, bur-abraded Ni-Cr, etched ceramic and etched enamel substrates using the resin cements RelyX ARC or Enforce. Materials and methods: Ni-Cr specimens were made and sandblasted with Al2O3 airborne-particles. Disc-shaped patterns were made for each of the four experimental substrates: Ni-Cr treated with Al2O3 airborne-particles, Ni-Cr treated with diamond bur abrasion, etched enamel and etched ceramic. Results: Significant differences in shear bond strength were found between the different materials and luting agents evaluated. The Ni-Cr alloy cylinders bonded to Ni-Cr surfaces sandblasted with 50 lm Al2O3 particles and bonded with Enforce achieved the highest bond strength when compared with other substrates (28.9 MPa, p < 0.05). Bur-abraded metal discs had lowest values, regardless the cement used (2.9 and 6.9 MPa for RelyX and Enforce, respectively). Etched enamel and etched ceramic had similar shear bond strengths within cement groups and performed better when RelyX was used. Conclusions: Bonding Ni-Cr to Ni-Cr and ceramic may result in similar and higher bond strength when compared to Ni-Cr/enamel bonding. For metal/metal bonding, higher shear bond strength was achieved with resin cement Enforce, and for metal/ceramic and metal/enamel bonding, RelyX had higher results.

Identical sequence patterns in the ends of exons and introns of human protein-coding genes

Intron splicing is one of the most important steps involved in the maturation process of a pre-mRNA. Although the sequence profiles around the splice sites have been studied extensively, the levels of sequence identity between the exonic sequences preceding the donor sites and the intronic sequences preceding the acceptor sites has not been examined as thoroughly. In this study we investigated identity patterns between the last 15 nucleotides of the exonic sequence preceding the 5' splice site and the intronic sequence preceding the 3' splice site in a set of human protein-coding genes that do not exhibit intron retention. We found that almost 60% of consecutive exons and introns in human protein-coding genes share at least two identical nucleotides at their 3' ends and, on average, the sequence identity length is 2.47 nucleotides. Based on our findings we conclude that the 3' ends of exons and introns tend to have longer identical sequences within a gene than when being taken from different genes. Our results hold even if the pairs are non-consecutive in the transcription order. (C) 2012 Elsevier Ltd. All rights reserved.

Effects of neonatal castration and androgenization on sexual dimorphism in bone, leptin and corticosterone secretion

This study investigated the role of neonatal sex steroids in rats on sexual dimorphism in bone, as well as on leptin and corticosterone concentrations throughout the lifespan. Castration of males and androgenization of females were used as models to investigate the role of sex steroids shortly after birth. Newborn Wistar rats were divided into four groups, two male groups and two female groups. Male pups were cryoanesthetized and submitted to castration or sham-operation procedures within 24 h after birth. Female pups received a subcutaneous dose of testosterone propionate (100 mu g) or vehicle. Rats were euthanized at 20, 40, or 120 postnatal days. Body weight was also measured at 20, 40, and 120 days of age, and blood samples and femurs were collected. The length and thickness of the femurs were measured and the areal bone mineral density (areal BMD) was determined by dual-energy X-ray absorptiometry (DEXA). Biomechanical three-point bending testing was used to evaluate bone breaking strength, energy to fracture, and extrinsic stiffness. Blood samples were submitted to a biochemical assay to estimate calcium, phosphorus, alkaline phosphatase, leptin, and corticosterone levels. Weight gain, areal BMD and bone biomechanical properties increased rapidly with respect to age in all groups. In control animals, skeletal sexual dimorphism, leptin concentration, and dimorphic corticosterone concentration patterns were evident after puberty. However, androgen treatment induced changes in growth, areal BMD, and bone mass properties in neonatal animals. In addition, neonatally-castrated males had bone development and mechanical properties similar to those of control females. These results suggest that the exposure to neonatal androgens may represent at least one covariate that mediates dimorphic variation in leptin and corticosterone secretions. The study indicates that manipulation of the androgen environment during the critical period of sexual differentiation of the brain causes long-lasting changes in bone development, as well as serum leptin and corticosterone concentrations. In addition, this study provides useful models for the investigation of bone disorders induced by hypothalamic hypogonadism. (C) 2011 Elsevier Inc. All rights reserved.

Stand-level patterns of carbon fluxes and partitioning in a Eucalyptus grandis plantation across a gradient of productivity, in Sao Paulo State, Brazil

Wood production represents a large but variable fraction of gross primary production (GPP) in highly productive Eucalyptus plantations. Assessing patterns of carbon (C) partitioning (C flux as a fraction of GPP) between above- and belowground components is essential to understand mechanisms driving the C budget of these plantations. Better knowledge of fluxes and partitioning to woody and non-woody tissues in response to site characteristics and resource availability could provide opportunities to increase forest productivity. Our study aimed at investigating how C allocation varied within one apparently homogeneous 90 ha stand of Eucalyptus grandis (W. Hill ex Maiden) in Southeastern Brazil. We assessed annual above-ground net primary production (ANPP: stem, leaf, and branch production) and total belowground C flux (TBCF: the sum of root production and respiration and mycorrhizal production and respiration), GPP (computed as the sum of ANPP, TBCF and estimated aboveground respiration) on 12 plots representing the gradient of productivity found within the stand. The spatial heterogeneity of topography and associated soil attributes across the stand likely explained this fertility gradient. Component fluxes of GPP and C partitioning were found to vary among plots. Stem NPP ranged from 554 g C m(-2) year(-1) on the plot with lowest GPP to 923 g C m(-2) year(-1) on the plot with highest GPP. Total belowground carbon flux ranged from 497 to 1235 g C m(-2) year(-1) and showed no relationship with ANPP or GPP. Carbon partitioning to stem NPP increased from 0.19 to 0.23, showing a positive trend of increase with GPP (R-2 = 0.29, P = 0.07). Variations in stem wood production across the gradient of productivity observed at our experimental site were a result of the variability in C partitioning to different forest system components.