943 resultados para Design I
Resumo:
This work presents the design of a fuzzy controller with simplified architecture. This architecture tries to minimize the time processing used in? the several stages of hazy modeling of systems and processes. The basic procedures of fuzzification and defuzzification are simplified to the maximum while the inference procedures are computed in private way. Therefore, the simplified architecture allows a fast and easy configuration of the fuzzy controller.All rules that define the control actions are determined by inference procedures and the defuzzification is made automatically using a simplified algorithm. The fuzzy controller operation is standardized and the control actions are previously calculated For general-purpose application? ann results, the industrial systems of fluid pow cona ol will be considered.
Resumo:
The effect of the addition of ground ear corn with husks, wheat bran and saccharin, on the rate of 0, 8, 16 and 24% (dry weight of additive/wet weight of cut green grass), upon the chemical composition of both fodder and silage of Pennisetum purpureum Schum. cv. Guaçu was evaluated. A split-plot randomized block design was used. The plots were the additives and their levels and the sub-plots the material types (forage + additives and their silages). The grass was fertilized with 20 t/ha of green manure and 80, 160 and 160 kg/ha of P2O5, N and K2O, respectively. The material (chopped grass mixed with the levels of the additives) was ensiled in experimental silos (200 L plastic vessels). The dry matter percentages increased linearly as additive levels increased, being greater the effect of ground ear corn with husks. Wheat bran addition and saccharin increased the crude protein and soluble carbohydrates percentages while the ground ear corn with husks addition decreased them. Losses of dry matter soluble compounds (CP, ash and NFE) and a relative rise in the less soluble compounds (CF and organic matter) were observed.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Background: Cardiovascular disease is the leading cause of death in Brazil, and hypertension is its major risk factor. The benefit of its drug treatment to prevent major cardiovascular events was consistently demonstrated. Angiotensin-receptor blockers (ARB) have been the preferential drugs in the management of hypertension worldwide, despite the absence of any consistent evidence of advantage over older agents, and the concern that they may be associated with lower renal protection and risk for cancer. Diuretics are as efficacious as other agents, are well tolerated, have longer duration of action and low cost, but have been scarcely compared with ARBs. A study comparing diuretic and ARB is therefore warranted.Methods/design: This is a randomized, double-blind, clinical trial, comparing the association of chlorthalidone and amiloride with losartan as first drug option in patients aged 30 to 70 years, with stage I hypertension. The primary outcomes will be variation of blood pressure by time, adverse events and development or worsening of microalbuminuria and of left ventricular hypertrophy in the EKG. The secondary outcomes will be fatal or non-fatal cardiovascular events: myocardial infarction, stroke, heart failure, evidence of new subclinical atherosclerosis and sudden death. The study will last 18 months. The sample size will be of 1200 participants for group in order to confer enough power to test for all primary outcomes. The project was approved by the Ethics committee of each participating institution.Discussion: The putative pleiotropic effects of ARB agents, particularly renal protection, have been disputed, and they have been scarcely compared with diuretics in large clinical trials, despite that they have been at least as efficacious as newer agents in managing hypertension. Even if the null hypothesis is not rejected, the information will be useful for health care policy to treat hypertension in Brazil. Clinical trials registration number: ClinicalTrials.gov: NCT00971165. © 2011 Fuchs et al; licensee BioMed Central Ltd.
Resumo:
This paper presents a control method for a class of continuous-time switched systems, using state feedback variable structure controllers. The method is applied to the control of a non-trivial dc-dc power converter and a simple and inexpensive control circuit design, that was simulated using the software PSpice, is proposed. The design is based on Lyapunov-Metzler-SPR systems and the performance of the resulting control system is superior to that afforded by a recently proposed alternative sliding-mode control technique. © 2011 IFAC.
Resumo:
This paper presents novel simulation tools to assist the lecturers about learning processes on renewable energy sources, considering photovoltaic (PV) systems. The PV behavior, functionality and its interaction with power electronic converters are investigated in the simulation tools. The main PV output characteristics, I (current) versus V (voltage) and P (power) versus V (voltage), were implemented in the tools, in order to aid the users for the design steps. In order to verify the effectiveness of the developed tools the simulation results were compared with Matlab. Finally, a prototype was implemented with the purpose to compare the experimental results with the results from the proposed tools, validating its operational feasibility. © 2011 IEEE.
Resumo:
Includes bibliography
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
We are developing two-layered Yttrium Barium Copper Oxide (YBCO) thin film structures for energy efficient data links for superconducting electronics and present the results of their property measurements. High temperature superconductors (HTS) are advantageous for the implementation of energy-efficient cables interconnecting low temperature superconductor-based circuits and other cryogenic electronics circuits at higher temperature stages. The advantages of the HTS cables come from their low loss and low dispersion properties, allowing ballistic transfer of low power signals with very high bandwidth, low heat conduction and negligible inter-line crosstalk. The microstrip line cable geometry for typical materials is a two-layered film, in which the two superconducting layers are separated by an insulation layer with a minimized permittivity. We have made a proof of concept design of two YBCO films grown by pulsed laser deposition and then assembled into a sandwich with uniform insulating interlayer of tens of micrometers thick. We report on results obtained from such systems assembled in different ways. Structural and electromagnetic properties have been examined on individual films and on the corresponding sandwich composite. © 2013 IEEE.
Resumo:
Neste trabalho reportamos a investigação teórica da solvatação dos isômeros do tris- (8-idroxiquinolinolato) de alumínio III – Alq3, as propriedades eletroluminescentes na solvatação de Alq3 em líquidos orgânicos como metanol, etanol, dimetilformamida (DMF) e acetonitrila, a fim de se entender a dependência na variação de ambientes do sistema, aperfeiçoando o funcionamento de filmes transportadores em dispositivos eletroluminescentes do tipo OLED (Organic Light-Emitting Diodes) e por fim investigamos o mecanismo do transporte eletrônico no Alq3 aplicando uma baixa corrente elétrica na molécula e evidenciando as curvas corrente-voltagem característica do dispositivo. A simulação consiste na aplicação do método sequencial Monte Carlo / Mecânica quântica (S-MC/MQ), que parte de um tratamento inicial estocástico para separação das estruturas mais prováveis de menor energia e posteriormente com um tratamento quântico para plotar os espectros eletrônicos das camadas de solvatação separadas através do método ZINDOS/S. Nas propriedades elétricas do transporte utilizamos o método da função de Green de não equilíbrio acoplado a teoria do funcional densidade (DFT) inferindo que as ramificações mais externas correspondentes aos anéis no Alq3 seriam terminais para o translado eletrônico. Nossos resultados mostraram que a média dos espectros de absorção para solvatação do Alq3 em soluções sofre um desvio mínimo com a mudança de ambiente, estando em ótimo acordo com os resultados experimentais da literatura; e as curvas I-V confirmaram o comportamento diodo do dispositivo, corroborando com os sentidos mais pertinentes quanto aos terminais no Alq3 para se ter um transporte eletrônico satisfatório.
Resumo:
One of the most commonly used sampling techniques to capture leaf litter amphibians, lizards and small mammals is a set of pitfall traps with drift fences. However, there are still many speculations concerning the effectiveness of different designs of pitfall traps and the most adequate size of each trap. To address this problem, we conducted the first standardized comparison of patterns of species richness, rank-abundance, and community structure of leaf litter amphibians, lizards and small mammals for two trap designs (I and Y format) and three bucket sizes (35, 62, and 100 L) in a Neotropical forest. Results are very similar for the herpetofauna, regardless of the pitfall trap design or size used, while for small mammals values of species richness were higher for 100 L pitfall traps, as compared to the smaller traps. Therefore, the use of 100 L pitfall traps is recommended to sample the terrestrial vertebrate fauna, in multidisciplinary studies. For surveys aiming only the herpetofauna the use of smaller (35 L) traps is acceptable, taking into consideration the cost-benefits obtained by the smaller traps, in comparison to the larger ones.
Resumo:
Pós-graduação em Design - FAAC
Resumo:
Two experiments evaluated the influence of supplement composition on ruminal forage disappearance, performance, and physiological responses of Angus x Hereford cattle consuming a low-quality cool-season forage (8.7% CP and 57% TDN). In Exp. 1, 6 rumen-fistulated steers housed in individual pens were assigned to an incomplete 3 x 2 Latin square design containing 2 periods of 11 d each and the following treatments: 1) supplementation with soybean meal (PROT), 2) supplementation with a mixture of cracked corn, soybean meal, and urea (68:22:10 ratio, DM basis; ENER), or 3) no supplementation (CON). Steers were offered meadow foxtail (Alopecurus pratensis L.) hay for ad libitum consumption. Treatments were provided daily at 0.50 and 0.54% of shrunk BW/steer for PROT and ENER, respectively, to ensure that PROT and ENER intakes were isocaloric and isonitrogenous. No treatment effects were detected on rumen disappearance parameters of forage DM (P >= 0.33) and NDF (P >= 0.66). In Exp. 2, 35 pregnant heifers were ranked by initial BW on d -7 of the study, allocated into 12 feedlot pens (4 pens/treatment), and assigned to the same treatments and forage intake regimen as in Exp. 1 for 19 d. Treatments were fed once daily at 1.77 and 1.92 kg of DM/heifer for PROT and ENER, respectively, to achieve the same treatment intake as percent of initial BW used in Exp. 1 (0.50 and 0.54% for PROT and ENER, respectively). No treatment effects (P = 0.17) were detected on forage DMI. Total DMI was greater (P < 0.01) for PROT and ENER compared with CON and similar between PROT and ENER (P = 0.36). Accordingly, ADG was greater (P = 0.01) for PROT compared with CON, tended to be greater for ENER compared with CON (P = 0.08), and was similar between ENER and PROT (P = 0.28). Heifers receiving PROT and ENER had greater mean concentrations of plasma glucose (P = 0.03), insulin (P <= 0.09), IGF-I (P <= 0.04), and progesterone (P = 0.01) compared to CON, whereas ENER and PROT had similar concentrations of these variables (P >= 0.15). A treatment x hour interaction was detected (P < 0.01) for plasma urea N (PUN), given that PUN concentrations increased after supplementation for ENER and PROT (time effect, P < 0.01) but did not change for CON (time effect, P = 0.62). In conclusion, beef cattle consuming low-quality cool-season forages had similar ruminal forage disappearance and intake, performance, and physiological status if offered supplements based on soybean meal or corn at 0.5% of BW.
Resumo:
Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB