Cyclic deformation of advanced high-strength steels : mechanical behavior and microstructural analysis

The fatigue properties of multiphase steels are an important consideration in the automotive industry. The different microstructural phases present in these steels can influence the strain life and cyclic stabilized strength of the material due to the way in which these phases accommodate the applied cyclic strain. Fully reversed strain-controlled low-cycle fatigue tests have been used to determine the mechanical fatigue performance of a dual-phase (DP) 590 and transformation-induced plasticity (TRIP) 780 steel, with transmission electron microscopy (TEM) used to examine the deformed microstructures. It is shown that the higher strain life and cyclic stabilized strength of the TRIP steel can be attributed to an increased yield strength. Despite the presence of significant levels of retained austenite in the TRIP steel, both steels exhibited similar cyclic softening behavior at a range of strain amplitudes due to comparable ferrite volume fractions and yielding characteristics. Both steels formed low-energy dislocation structures in the ferrite during cyclic straining.

Aspergillus species, cyclic dimeric dipeptide derivative substance P antagonist biosynthetic products thereof, and process for preparation thereof

A novel Aspergillus species, cyclic dimeric dipeptide derivatives which are biosynthetic products thereof and are useful as Substance P antagonists and therefore as analgesic and/or antiinflammatory agents, and a process for preparation of the biosynthetic products are disclosed.

Non-retinal light stimulation and the human biological clock

Since 1998, debate has occurred over whether light synchronises the human biological clock through the visual system only, or if the light penetrating our skin is also influential. This thesis provides definitive, debate ending, evidence that skin exposure to even intensely bright light has no impact on circadian timing. The portfolio presents a review of the literature regarding the efficacy of dialectical behavior therapy as a treatment for borderline personality disorder, a summary of the proposed mechanisms of action on the various treatment components, and a description of the clinical application of the four 'skills training modules' via the use of four case study examples.

On the role of cyclic unsaturated additives on the behaviour of lithium metal electrodes in ionic liquid electrolytes

Three cyclic vinyl based additives, based respectively on oxygen, sulphur and fluorine, are tested for their ability to improve the cycling of lithium in a hostile ionic liquid medium. Oxygen based vinylene carbonate is found to offer the best protection of the lithium metal whilst allowing very consistent lithium cycling to occur. The vinylene carbonate based system under study is, however, imperfect. Lithium metal is deposited in a dendritic morphology, and vinylene carbonate is rapidly consumed during lithium cycling if it is present in a small quantity. Our results suggest that ionic liquid systems critically relying on a small amount of additive to protect a lithium electrode are not viable for long cycle life secondary batteries. It is suggested that an ionic liquid which itself is lithium metal compatible be used instead.

Cyclic deformation behaviour of ultrfine-grained aluminium

Ultrafine-grained aluminium was produced by cryo-rolling and their deformation response under cyclic loading was investigated. Shear banding and grain coarsening were recognized as the main damage mechanism reducing their performance under cyclic loading. However presence of precipitates in ultrafine-grained A1 can actively hinder the operation of cyclic softening mechanisms and increase microstructural stability under cyclic loading.

Finite element simulations of the cyclic elastoplastic behaviour of copper thin films

A large-scale computational and statistical strategy is presented to investigate the development of plastic strain heterogeneities and plasticity induced roughness at the free surface in multicrystalline films subjected to cyclic loading conditions, based on continuum crystal plasticity theory. The distribution of plastic strain in the grains and its evolution during cyclic straining are computed using the finite element method in films with different ratios of in-plane grain size and thickness, and as a function of grain orientation (grains with a {1 1 1} or a {0 0 1} plane parallel to the free surface and random orientations). Computations are made for 10 different realizations of aggregates containing 50 grains and one large aggregate with 225 grains. It is shown that overall cyclic hardening is accompanied by a significant increase in strain dispersion. The case of free-standing films is also addressed for comparison. The overall surface roughness is shown to saturate within 10 to 15 cycles. Plasticity induced roughness is due to the higher deformation of {0 0 1} and random grains and due to the sinking or rising at some grain boundaries.

What has transcranial magnetic stimulation taught us about neural adaptations to strength training? A brief review

The evidence for neural mechanisms underpinning rapid strength increases has been investigated and discussed for over 30 years using indirect methods, such as surface electromyography, with inferences made toward the nervous system. Alternatively, electrical stimulation techniques such as the Hoffman reflex, volitional wave, and maximal wave have provided evidence of central nervous system changes at the spinal level. For 25 years, the technique of transcranial magnetic stimulation (TMS) has allowed for noninvasive supraspinal measurement of the human nervous system in a number of areas such as fatigue, skill acquisition, clinical neurophysiology, and neurology. However, it has only been within the last decade that this technique has been used to assess neural changes after strength training. The aim of this brief review is to provide an overview of TMS, discuss specific strength training studies that have investigated changes, after short-term strength training in healthy populations in upper and lower limbs, and conclude with further research suggestions and the application of this knowledge for the strength and conditioning coach.

Data with abnormal cyclic pattern in a manufacturing process

The data represents a cyclic pattern in process variable presented in a control chart due to periodic rotation of operators, seasonal or environmental changes.

A head mountable deep brain stimulation device for laboratory animals

Deep brain stimulation has emerged as an effective method to treat certain medical conditions. Electrical charges are injected into the target tissue through a conducting electrode exciting the tissue. A variety of DBS devices have been developed based on different operation principles. Majority of these devices, however, employ complex circuitry and are bulky. In clinical trials, laboratory animals need to freely move around and perform activities whilst receiving brain stimulation for days. This paper presents a simple lightweight head mountable deep brain stimulation device that can be carried by the animal during the course of a clinical trial. The device produces continuous current pulses of specific characteristics. It employs passive charge balancing to minimize undesirable effects on the target tissue. The device is constructed and its performance tested.

Microstructural response of nanocrystalline Al to cyclic loading

The data is derived from an investigation into the microstructural changes of nanostructure Al (produced by cryo-rolling) in response to cyclic loading using electron microscopy and EBSD. The aim is to develop a better understanding of the deformation mechanisms in ultrafine grained/nanostructure metals under cyclic loading conditions.

A comparison of two methods in acquiring stimulus-response curves with transcranial magnetic stimulation

Background
The stimulus–response (S–R) curve is a well accepted constituent in transcranial magnetic stimulation (TMS) studies. However, it has been suggested that parameters of the S–R curve differ when stimuli are provided in a “ramped” (measured steps from low to high intensity), or “random” fashion.

Hypothesis
We hypothesized that there would be no difference in the parameters of the S–R curve between either methodologies.

Methods
Using a randomised cross-over design, 10 healthy participants (29.6 ± 6.4 yrs, 3 f) completed “ramped” or “random” curves in biceps brachii (BB) and first dorsal interosseous (FDI) muscles of both limbs. Curves were compared using mixed-factor ANOVA and correlated between limbs and methodologies.

Results
No differences (P > 0.05) and high correlations (range 0.71–0.97; P < 0.001) were observed in BB and FDI data between curves.

Conclusions
This study demonstrated that either methodology provides similar parameters of the S–R curve in healthy participants.