Annotated record and spectrochemical analyses of Mn nodules from Georgia Strait, British Columbia obtained during CNAV Laymore in 1970

A study of the distribution, dispersal and composition of surficial sediments in the Strait of Georgia, B.C., has resulted in the understanding of basic sedimentologic conditions within this area. The Strait of Georgia is: a long, narrow, semi-enclosed basin with a restricted circulation and a single, main, sediment source. The Fraser. River supplies practically all the sediment now being deposited in the Strait of Georgia, the bulk of it during the spring and summer freshet. This river is building a delta into the Strait from the east side near the south end. Ridges of Pleistocene deposits within the Strait and Pleistocene material around the margins, like bedrock exposures, provide local sources of sediment of only minor importance. Rivers and streams other than the Fraser contribute insignificant quantities of sediment to the Strait. Sandy sediments are concentrated in the vicinity of the delta, and in the area to the south and southeast. Mean grain size decreases from the delta toward the northwest along the axis of the Strait, and basinwards from the margins. Silts and clays are deposited in deep water west and north of the delta front, and in deep basins northwest of the delta. Poorly sorted sediments containing a gravel component are located near tidal passes, on the Vancouver Island shelf area, on ridge tops within the Strait, and with sandy sediments at the southeastern end of the study area. The Pleistocene ridges are areas of non-deposition, having at most a thin veneer of modern mud on their crests and upper flanks. The southeastern end of the study area contains a thick wedge of shandy sediment which appears to be part of an earlier delta of the Fraser River. Evidence suggests that it is now a site of active submarine erosion. Sediments throughout the Strait are compositionally extremely similar, with-Pleistocene deposits of the Fraser River drainage basin providing the principal, heterogeneous source. Gravels and coarse sands are composed primarily of lithic fragments, dominantly of dioritic to granodloritlc composition. Sand fractions exhibit increasing simplicity of mineralogy with decreasing grain-size. Quartz, felspar, amphibole and fine-grained lithic fragments are the dominant constituents of the finer sand grades. Coarse and medium silt fractions have compositions similar to the fine sands. Fine silts show an increase in abundance of phyllosilicate material, a feature even more evident in the clay-size fractions on Montmorillonite, illite, chlorite, quartz and feldspar are the main minerals in the coarse clay fraction, with minor mixed-layer clays and kaolinite. The fine clay fraction is dominated by montmorillonite, with lesser amounts of illite and chlorite. The sediments have high base-exchange capacities, related to a considerable content of montmorillonite. Magnesium is present in exchange positions in greater quantity in Georgia Strait sediments than in sediments from the Fraser River, indicating a preferential uptake of this element in the marine environment. Manganese nodules collected from two localities in the Strait imply slow sediment accumulation rates at these sites. Sedimentation rates on and close to the delta, and in the deep basins to the northwest, are high.

Practica iudiciaria / Ia[cobi] de bel[lo] visu sole[m]nis [et] iudicibus o[mn]ibus, aduocatisq[ue] [et] practicis cu[n]ctis nedu[m] vtilis[s]immo p[er]necessaria Practica Iudiciaria in materijs criminalib[us] ... Iacobi de bellouisu ; cu[m] additionib[us]

Ubaldi, Baldo degli, 1327-1400. Practica Baldi 1525 : perutilis ac vere aurea practica iuris vtriusq[ue] monarche ac luminis. Impressum Lugduni : in calcographia dilige[n]tissimi i[m]pressoris Iohannis Crespin, 1525, 17 Augusti. [12], XCVI h. Sign.: A8,

Practica iudiciaria / Ia[cobi] de bel[lo] visu sole[m]nis [et] iudicibus o[mn]ibus, aduocatisq[ue] [et] practicis cu[n]ctis nedu[m] vtilis[s]immo p[er]necessaria Practica Iudiciaria in materijs criminalib[us] ... Iacobi de bellouisu ; cu[m] additionib[us] celeberrimi d[omi]ni Honorati Pugeti ... ; Ad vngue[m] quoq[ue] p[er] Celsum Hugone[m] dissutu[m] …

Hojas imp. por ambas caras

Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy

The influence of nanosecond laser pulses applied by laser shock peening without absorbent coating (LSPwC) with a Q-switched Nd:YAG laser operating at a wavelength of λ = 1064 nm on 6082-T651 Al alloy has been investigated. The first portion of the present study assesses laser shock peening effect at two pulse densities on three-dimensional (3D) surface topography characteristics. In the second part of the study, the peening effect on surface texture orientation and micro-structure modification, i.e. the effect of surface craters due to plasma and shock waves, were investigated in both longitudinal (L) and transverse (T) directions of the laser-beam movement. In the final portion of the study, the changes of mechanical properties were evaluated with a residual stress profile and Vickers micro-hardness through depth variation in the near surface layer, whereas factorial design with a response surface methodology (RSM) was applied. The surface topographic and micro-structural effect of laser shock peening were characterised with optical microscopy, InfiniteFocus® microscopy and scanning electron microscopy (SEM). Residual stress evaluation based on a hole-drilling integral method confirmed higher compression at the near surface layer (33 μm) in the transverse direction (σmin) of laser-beam movement, i.e. − 407 ± 81 MPa and − 346 ± 124 MPa, after 900 and 2500 pulses/cm2, respectively. Moreover, RSM analysis of micro-hardness through depth distribution confirmed an increase at both pulse densities, whereas LSPwC-generated shock waves showed the impact effect of up to 800 μm below the surface. Furthermore, ANOVA results confirmed the insignificant influence of LSPwC treatment direction on micro-hardness distribution indicating essentially homogeneous conditions, in both L and T directions.

Requisitos de acreditación para un laboratorio de caracterización de residuos de metalurgia no férrea (Al, Cu, Zn, Pb)

El objetivo principal del presente proyecto es implantar un sistema de calidad en un laboratorio de caracterización de residuos, con el fin de obtener la acreditación otorgada por la Entidad Nacional de Acreditación (ENAC) como laboratorio de caracterización de residuos metalúrgicos no férreos. El sistema de calidad a implantar se basa en la Norma UNE-EN ISO/IEC 17025:2005 (requisitos generales para la competencia de los laboratorios de ensayo y calibración). Se trata por tanto de determinar los principales residuos de proceso y operación, de la metalurgia del Al, Cu, Zn y Pb, para posteriormente y mediante las normas UNEEN-CEN identificar los ensayos normalizados de caracterización de dichos residuos. y adecuar dichos ensayos a la norma. Finalmente se describe el proceso de implantación del sistema de calidad basado en la citada norma, y se hace un estudio económico que incluye tanto los gastos de inversión en equipos como los gastos de operación y mantenimiento (CAPEX y OPEX). Todo ello para poder ser acreditados por un organismo como ENAC.

Qualidade nutricional de rações para cães: Influência de Zn na absorção de Cu e na prevenção de doença hepática

As rações comerciais devem ser um alimento balanceado que supra todas as exigências nutricionais nas diferentes fases da vida do animal. Sua formulação deve conter ingredientes de qualidade, em proporções adequadas. É de fundamental importância o conhecimento do valor nutricional das rações, para assegurar que o cão esteja ingerindo diariamente quantidades corretas dos nutrientes. O desbalanço de elementos essenciais e a presença de elementos tóxicos podem causar desequilíbrios nutricionais, doenças e, até mesmo, consequências fatais aos cães. O cobre é um dos vários elementos de importância a ser estudado quanto aos defeitos metabólicos nos cães. O acúmulo de cobre no fígado pode ocasionar lesões progressivas nas organelas dos hepatócitos, resultando em hepatite crônica e cirrose. Diante disso, este trabalho teve como objetivos (I) quantificação dos elementos químicos com função nutricional e com potencial tóxico presentes nas rações para cães adultos e filhotes, (II) avaliação da composição centesimal das rações amostradas, (III) avaliação da variação dos elementos químicos entre as amostras de ração de um mesmo lote de produção (IV), estudo da representatividade de pequenas porções-teste, (V) avaliação da bioacessibilidade de cobre em rações, com experimento in vitro. Os elementos químicos Al, As, Br, Ca, Cl, Co, Cr, Cs, Cu, Fe, I, K, La, Mg, Mn, Na, P, Rb, Sb, Sc, Se, Ti, U e Zn foram determinados pela análise por ativação neutrônica instrumental (INAA). A composição centesimal foi avaliada de acordo com os métodos recomendados da AOAC. A homogeneidade de distribuição dos elementos químicos nas rações foi avaliada pela análise de amostras grandes (LS-NAA). A bioacessibilidade de cobre nas rações foi estimada por meio da simulação da digestão gastrointestinal in vitro. Foi possível determinar por INAA todos os nutrientes minerais, isto é, Ca, P, K, Na, Cl, Mg, Fe, Cu, Mn, Zn, I e Se, com limites estabelecidos pela Association of American Feed Control Officials. Foram notadas em algumas rações altas concentrações de Al, Sb e U, elementos com grande potencial tóxico. Cerca de 16 % das amostras de ração apresentaram, pelo menos, um parâmetro não conforme quanto à composição centesimal. Os resultados obtidos por LS-NAA e NAA convencional mostraram variação na composição entre os sacos de ração para Br, Ca, Na e Zn, com boa concordância entre ambos os métodos. O emprego da LS-NAA combinada com NAA convencional permitiu observar que pequenas porções-teste (350 mg) de ração são representativas comparadas com aquelas de 1 kg para Br, Ca, K, Na e Zn. Em todas as rações para cães, 50 % do cobre presente estava sob a forma bioacessível

X-ray absorption study of the ferromagnetic Cu moment at the YBa_(2)Cu_(3)O_(7)/La_(2/3)Ca_(1/3)MnO_(3) interface and variation of its exchange interaction with the Mn moment

With x-ray absorption spectroscopy and polarized neutron reflectometry we studied how the magnetic proximity effect at the interface between the cuprate high-TC superconductor YBa_(2)Cu_(3)O_(7) (YBCO) and the ferromagnet La_(2/3)Ca_(1/3)MnO_(3) (LCMO) is related to the electronic and magnetic properties of the LCMO layers. In particular, we explored how the magnitude of the ferromagnetic Cu moment on the YBCO side depends on the strength of the antiferromagnetic (AF) exchange coupling with the Mn moment on the LCMO side. We found that the Cu moment remains sizable if the AF coupling with the Mn moments is strongly reduced or even entirely suppressed. The ferromagnetic order of the Cu moments thus seems to be intrinsic to the interfacial CuO_(2) planes and related to a weakly ferromagnetic intraplanar exchange interaction. The latter is discussed in terms of the partial occupation of the Cu 3d_(3z^(2)−r^(2)) orbitals, which occurs in the context of the so-called orbital reconstruction of the interfacial Cu ions.