Paleoenvironmental evolution of the Helvetic shallow-water carbonate platform near the Barremian-Aptian boundary, and its relationship with paleoceanographic and paleoclimatic change in the Tethys

Abstract:During my doctoral research, I focused on deciphering the interactions between sea-level and climate change during the Late Barremian-Early Aptian, their expression in the Tethys basin and in the Helvetic carbonate platform. The research highlights are summarized here in three points: In the Helvetic Alps, the transition between the Lower Schrattenkalk (Upper Barremian) and the Rawil Member (Lowermost Aptian) is characterized by a change from a predominantly photozoan to a heterozoan carbonate-producing system, which coincides in time with a general increase in detrital and nutrient input. The clay mineral record shows the appearance of kaolinite within the Rawil Member, whereas this mineral is absent from the uppermost Lower and lowermost Upper Schrattenkalk Members. This indicates the installation of a warmer and more humid climate during this time period. A negative peak in 513C is recorded at the top of the Lower Schrattenkalk Member, and correlates with the well-known negative excursion of -l%o occurring in other basins and dated as latest Barremian, thus confirming a latest Barremian and earliest Aptian age for the Lower Schrattenkalk and Rawil Members, respectively. Furthermore, a sequence stratigraphie framework has been defined for the Rawil Member, based on both the ecology of faunal and floral assemblages, and their palaeoenvironmental interpretation, as well as on the stacking pattern of limestone beds observed during field prospection. The presence of a sequence boundary is postulated near the top of the Lower Schrattenkalk Member, which is correlated with the earliest Aptian SbAl defined in Vercors (France). The SbAl is characterized by a maximum of proximal assemblages and by the disappearance of several benthic foraminiferal species. Within the Rawil Member itself, the stacking pattern and microfacies trends are interpreted to represent the TST of the first Aptian sequence. With regards to the pelagic setting in the Tethyan realm, I investigated the Gorgo a Cerbara section (central Italy). There, thin organic-rich layers occur episodically in pelagic carbonates of the upper Barremian portion of the Maiolica Formation. They are associated with high Corg:Ptot ratios, which indicate the presence of intermittent dysoxic to anoxic conditions. Coarse correlations are also observed between TOC, Ρ and biogenic silica contents, indicating links between Ρ availability, productivity, and organic matter preservation. The corresponding 813Ccarb and δ180 records remain, however, quite stable, indicating that these brief periods of enhanced TOC preservation did not have sufficient impact on the marine carbon household to deviate 6,3C records, and are probably not the consequence of major climate change. On the other hand, organic-rich layers become more frequent around the Barremian-Aptian boundary in both pelagic and hemi-pelagic environments (Gorgo a Cerbara and La Bédoule, France), which are correlated with negative excursions in 6l3Ccarb and 613Corg records. During the earliest Aptian, at Gorgo a Cerbara, the frequency of organic-rich intervals progressively increases and redox-sensitive trace-element enrichments become more frequent, until the highest TOC-enriched level just below the "Livello Selli", indicator of Oceanic Anoxic Event la (OAEla). The latter is associated with the well-known negative spike in 613Ccarb and S,3Corg records, a diminution in the δ,80 record interpreted as the consequence of a wanning interval, an important peak in Ρ accumulation and high Cor::Ptot ratios indicating the prevalence of anoxic conditions. The Selli Level (OAEla) documents a general cooling phase and coincides with maximum RSTE enrichments as well as high Corg:Ptot ratios, which confirm the importance of anoxic conditions during OAE1 a at this site.During the Early Aptian, environmental change on the platform is expressed by orbitolinids proliferation that may be induced by both climate change and sea-level rise. In the basin, the successive black shales horizons from the Late Barremian until the OAE la are interpreted as the progressive impact of palaeoenvironmental change probably linked to the formation of the Ontong- Java plate-basalt plateau.RésuméCe travail de thèse a permis d'investiguer les interactions entre les variations du niveau marin et les changements climatiques sur la plate-forme helvétique ainsi qu'en domaine pélagique à la limite Barrémien-Aptien (Crétacé).Dans les Alpes helvétiques, la limite Barrémien-Aptien est marquée par la transition du Schrattenkalk inférieur, caractérisé par des carbonates photozaires, au Membre de Rawil caractérisé par des carbonates héterozoaires. Cette transition est marquée par une arrivée massive d'éléments détritiques et un apport de nutriments ayant entraîné la prolifération de foraminifères agglutinés tels que les orbitolines. L'analyse des minéraux argileux indique l'apparition de la kaolinite durant le Membre de Rawil, interprétée comme l'installation d'un climat plus chaud et humide. Un pic négatif en 513C est enregistré au sommet du Schrattenkalk inférieur correspond à l'excursion négative de -1%0 bien connue en domaine pélagique et datée comme Barrémien terminal. Cette corrélation apporte un contrôle chronostratigraphique supplémentaire permettant de dater le Schrattenkalk inférieur du Barrémien sup. et le Membre de Rawil de l'Aptien inf. D'autre part, une étude stratigraphique, basée sur des observations de terrain et sur l'interprétation d'assemblages floristiques et faunistiques en terme de paléoenvironnement a permis de mettre en évidence une limite de séquence au sommet du Schrattenkalk inf., corrélable avec la SbAl définie dans le Vercors. Durant la mise en place du Membre de Rawil, l'évolution des microfaciès est interprétée comme le « Transgressive System Tract » de la première séquence aptienne.En domaine pélagique, de minces couches riches en matière organique (MO) apparaissent dès le Barrémien sup. dans la coupe de Gorgo a Cerbara (Italie). Elles sont associées à un ratio C:P élevé indiquant des conditions épisodiquement dysoxiques à anoxiques. De plus, une corrélation nette entre Carbone Organique Total (TOC), phosphore (P) et silice biogénique est observée correspondant à un lien entre Ρ disponible, productivité et préservation de la MO. Pourtant, dans le même temps, le ÔI3C et le δ1βΟ restent constants indiquant des conditions environnementales stables et un cycle du carbone non perturbé par la préservation de MO qui ne serait pas la conséquence d'un changement climatique global mais juste d'un effet local.Ala limite Barrémien-Aptien, en domaine hémi-pélagique (La Bédoule, France) et pélagique (Gorgo a Cerbara), les couches riches en MO sont plus fréquentes et plus épaisses, elles se sont déposées en même temps qu'un pic négatif en 513CCARB et ô13Coib probablement dû à un épisode volcanique. A l'Aptien inf. le TOC des niveaux riches en MO augmente progressivement en même temps que la teneur en éléments traces jusqu'au dernier enrichissement avant l'événement anoxique océanique la (OAE la) correspondant au « niveau critique inf. », indiquant des conditions anoxiques moins restreintes. Celui-ci est également caractérisé par le fameux pic négatif en Ô13C (C3), une diminution du δ180 interprétée comme un réchauffement, par un pic en Ρ et un ratio C:P élevé. L'OAE 1 a, quant à lui, enregistre un refroidissement et coïncide avec le maximum en éléments traces ainsi qu'un fort ratio C:P mettant en valeur l'importance des conditions anoxiques pendant 1ΌΑΕ la dans cette coupe alors qu'aucune perturbation n'est enregistrés à La Bédoule probablement à cause de conditions paléogéographiques locales.Durant l'Aptien inf., les changements environnementaux sur la plate-forme se marquent par la prolifération d'orbitolines due à un changement climatique et une hausse du niveau marin. En domaine profond, la succession de niveaux riches en MO du Barrémien sup. jusqu'à l'OAE la documente l'impact progressif de changements paléoenvironnementaux, probablement liés à la formation du plateau d'Ontong Java à l'ouest de l'océan Pacifique.

The central Sesia-Lanzo zone (Western Italian Alps) - New field observations and lithostratigraphic subdivisions

An extensive study of the central part of the Sesia Lanzo Zone has been undertaken to identify pre-Alpine protoliths and to reconstruct the lithologic and tectonic setting of this part of the Western Alps. Three main complexes have been defined: 1) the Polymetamorphic Basement Complex, corresponding to the lower unit of the Sesia Lanzo Zone after COMPAGNONI et al. (1977), is further subdivided into the three following units: a) an Internal Unit characterized by eo-Alpine high pressure (HP) assemblages (DAL PIAZ et al., 1972) (Eclogitic Micaschists); b) an Intermediate Unit where HP parageneses are partially re-equilibrated under greenschist conditions and c) an External Unit where the main foliation is defined by a greenschist paragenesis (Gneiss Minuti auct.). 2) the Monometamorphic Cover Complex, subdivided into the followings: a) the Bonze Unit, composed of sheared metagabbros, eclogitized metabasalts with MORB geochemical affinity and related metasediments (micaschists, quartzites and Mn-cherts) and b) the Scalaro Unit, containing predominantly metasediments of supposed Permo-Triassic age (yellow dolomitic marbles, calcschists and conglomeratic limestones, micaschists and quartzites with thin levels of basic rocks with within plate basalts [WPB] geochimical affinity). Multiple lithostratigraphic sequences for the Monometamorphic Cover Complex are proposed. The contact between the Bonze and Scalaro Units is defined by repetitions of dolomitic marbles and metabasalts; the ages of the metasediments have been assigned solely by analogy with other sediments of the Western Alps, due to the absence of fossils. The Monometamorphic Cover Complex can be considered as the autochthonous cover of the Sesia Lanzo Zone because of the primary contacts with the basement and because of the presence of preAlpine HT basement blocks in the cover sequences. 3) The pre-Alpine high temperature (HT) Basement Complex (or `'Seconda Zona Diorito-Kinzigitica''), comprises HT Hercynian rocks like kinzigites, amphibolites, granulites and calcite marbles; this Complex is always located between the Internal and the External Units and can be followed continuously for several kilometers south of the Gressoney Valley to the Orco Valley. A schematic evolution for the Sesia Lanzo Zone is proposed; based on available data together with new geochronological data, this study shows that the internal and external parts of the polymetamorphic basement of the Sesia Zone experienced different cooling histories .

Numerical analysis of the impact of charcoal production on soil hydrological behavior, runoff response and erosion susceptibility

The impact of charcoal production on soil hydraulic properties, runoff response and erosion susceptibility were studied in both field and simulation experiments. Core and composite samples, from 12 randomly selected sites within the catchment of Kotokosu were taken from the 0-10 cm layer of a charcoal site soil (CSS) and adjacent field soils (AFS). These samples were used to determine saturated hydraulic conductivity (Ksat), bulk density, total porosity, soil texture and color. Infiltration, surface albedo and soil surface temperature were also measured in both CSS and AFS. Measured properties were used as entries in a rainfall runoff simulation experiment on a smooth (5 % slope) plot of 25 x 25 m grids with 10 cm resolutions. Typical rainfall intensities of the study watershed (high, moderate and low) were applied to five different combinations of Ks distributions that could be expected in this landscape. The results showed significantly (p < 0.01) higher flow characteristics of the soil under charcoal kilns (increase of 88 %). Infiltration was enhanced and runoff volume reduced significantly. The results showed runoff reduction of about 37 and 18 %, and runoff coefficient ranging from 0.47-0.75 and 0.04-0.39 or simulation based on high (200 mm h-1) and moderate (100 mm h-1) rainfall events over the CSS and AFS areas, respectively. Other potential impacts of charcoal production on watershed hydrology were described. The results presented, together with watershed measurements, when available, are expected to enhance understanding of the hydrological responses of ecosystems to indiscriminate charcoal production and related activities in this region.

Growth, optical characterization, and laser operation of a stoichiometric crystal KYb(WO4)(2)

We present our recent achievements in the growing and optical characterization of KYb(WO4)2 (hereafter KYbW) crystals and demonstrate laser operation in this stoichiometric material. Single crystals of KYbW with optimal crystalline quality have been grown by the top-seeded-solution growth slow-cooling method. The optical anisotropy of this monoclinic crystal has been characterized, locating the tensor of the optical indicatrix and measuring the dispersion of the principal values of the refractive indices as well as the thermo-optic coefficients. Sellmeier equations have been constructed valid in the visible and near-IR spectral range. Raman scattering has been used to determine the phonon energies of KYbW and a simple physical model is applied for classification of the lattice vibration modes. Spectroscopic studies (absorption and emission measurements at room and low temperature) have been carried out in the spectral region near 1 µm characteristic for the ytterbium transition. Energy positions of the Stark sublevels of the ground and the excited state manifolds have been determined and the vibronic substructure has been identified. The intrinsic lifetime of the upper laser level has been measured taking care to suppress the effect of reabsorption and the intrinsic quantum efficiency has been estimated. Lasing has been demonstrated near 1074 nm with 41% slope efficiency at room temperature using a 0.5 mm thin plate of KYbW. This laser material holds great promise for diode pumped high-power lasers, thin disk and waveguide designs as well as for ultrashort (ps/fs) pulse laser systems.

Two-stage prograde and retrograde Variscan metamorphism of glaucophane-eclogites, blueschists and greenschists from Ile de Groix (Brittany, France)

On Ile de Groix, Variscan metamorphic former tholeiitic and alkaline basalts occur as glaucophane-eclogites, blueschists and greenschists in isolated lenses and layers within metapelites. Whole-rock delta O-18(SMOW) values of the metabasites show limited variations (10.4-12.0 parts per thousand) and no systematic differences among rock types and metamorphic grades. This provides no argument for large-scale blueschist-to-greenschist transformation driven by infiltration of externally derived fluids. Metamorphic mineralogical changes should have been triggered by internal fluids. Element variations in interlayered blue- and greenschists can be attributed to magmatic fractionation. Assemblages with garnet, clinopyroxene and glaucophane of a high-pressure/low-temperature (HP-LT) metamorphism M1, and NaCa-amphiboles (barroisite, magnesiohornblende, actinolite) of a medium-pressure/medium-temperature metamorphism M2 crystallized during deformation Dl. Detailed core-rim zonation profiles display increasing and then decreasing Al-IV in glaucophane of M1. NaCa-amphiboles of M2, mantling glaucophane and crystallized in porphyroblasts, show first increasing, then decreasing, Al-IV and Al-IV. Empirically calibrated thermobarometers allowed P-T path reconstructions. In glaucophane-eclogites of a metamorphic zone I, a prograde evolution to M1 peak conditions at 400-500 degreesC/10-12 kbar was followed by a retrograde P-T path within the glaucophane stability field. The subsequent M2 evolution was again prograde up to > 600 degreesC at 8 kbar and then retrograde. Similarly, in metamorphic zones II and III, prograde and retrograde paths of MI and M2 at lower maximal temperatures and pressures exist. The almost complete metamorphic cycle during M2 signalizes that the HP-LT rocks escaped from an early erosion by a moderate second burial event and explains the longlasting slow uplift with low average cooling rates.

Analysis, modelling and classification of geospatial data using machine learning

The research considers the problem of spatial data classification using machine learning algorithms: probabilistic neural networks (PNN) and support vector machines (SVM). As a benchmark model simple k-nearest neighbor algorithm is considered. PNN is a neural network reformulation of well known nonparametric principles of probability density modeling using kernel density estimator and Bayesian optimal or maximum a posteriori decision rules. PNN is well suited to problems where not only predictions but also quantification of accuracy and integration of prior information are necessary. An important property of PNN is that they can be easily used in decision support systems dealing with problems of automatic classification. Support vector machine is an implementation of the principles of statistical learning theory for the classification tasks. Recently they were successfully applied for different environmental topics: classification of soil types and hydro-geological units, optimization of monitoring networks, susceptibility mapping of natural hazards. In the present paper both simulated and real data case studies (low and high dimensional) are considered. The main attention is paid to the detection and learning of spatial patterns by the algorithms applied.

Prograde mica 40Ar/39Ar growth ages recorded in high pressure rocks (Syros, Cyclades, Greece)

Phengites from the eclogite and blueschist-facies sequences of the Cycladic island of Syros (Greece) have been dated by the in situ UV-laser ablation Ar-40/Ar-39 method. A massive, phengite-rich eclogite and an omphacite-rich metagabbro were investigated. The phengites are eubedral and coarse-grained (several 100 mum), strain-free and exhibit no evidence for late brittle deformation or recrystallization. Apparent ages in these samples range from 43 to 50 Ma for the phengite-rich eclogite and 42 to 52 Ma for the ompbacitic metagabbro. This large spread of ages is visible at all scales-within individual grains as well as in domains of several 100 mum and across the entire sample (ca. 2 cm). Such variations have been traditionally attributed to metamorphic cooling or the incorporation of excess argon. However, the textural equilibrium between the phengites and other high pressure phases and the subtle compositional variations within the phengites, especially the preservation of growth textures, alternatively suggest that the observed range in ages may reflect variations of radiogenic argon acquired during phengite formation and subsequent growth, thus dating a discrete event on the prograde path. This implies that the oldest phengite 40Ar/39Ar ages provide the best estimate of a minimum crystallization age, which is in agreement with recently reported U-Pb and Lu-Hf geochronological data. Our results are consistent with available stable isotope data and further suggest that, under fluid-restricted conditions, both stable and radiogenic isotopic systems can survive without significant isotopic exchange during subduction and exhumation from eclogite-facies P-T conditions. (C) 2004 Elsevier B.V. All rights reserved.

Controlled expression of recombinant proteins in Physcomitrella patens by a conditional heat-shock promoter: a tool for plant research and biotechnology.

The ability to express tightly controlled amounts of endogenous and recombinant proteins in plant cells is an essential tool for research and biotechnology. Here, the inducibility of the soybean heat-shock Gmhsp17.3B promoter was addressed in the moss Physcomitrella patens, using beta-glucuronidase (GUS) and an F-actin marker (GFP-talin) as reporter proteins. In stably transformed moss lines, Gmhsp17.3B-driven GUS expression was extremely low at 25 degrees C. In contrast, a short non-damaging heat-treatment at 38 degrees C rapidly induced reporter expression over three orders of magnitude, enabling GUS accumulation and the labelling of F-actin cytoskeleton in all cell types and tissues. Induction levels were tightly proportional to the temperature and duration of the heat treatment, allowing fine-tuning of protein expression. Repeated heating/cooling cycles led to the massive GUS accumulation, up to 2.3% of the total soluble proteins. The anti-inflammatory drug acetyl salicylic acid (ASA) and the membrane-fluidiser benzyl alcohol (BA) also induced GUS expression at 25 degrees C, allowing the production of recombinant proteins without heat-treatment. The Gmhsp17.3B promoter thus provides a reliable versatile conditional promoter for the controlled expression of recombinant proteins in the moss P. patens.

Contribution à la cartographie géomorphologique de la dynamique sédimentaire des petits bassins versants torrentiels

Les laves torrentielles sont l'un des vecteurs majeurs de sédiments en milieu montagneux. Leur comportement hydrogéomorphologique est contrôlé par des facteurs géologique, géomorphologique, topographique, hydrologique, climatique et anthropique. Si, en Europe, la recherche s'est plus focalisée sur les aspects hydrologiques que géomorphologiques de ces phénomènes, l'identification des volumes de sédiments potentiellement mobilisables au sein de petits systèmes torrentiels et des processus responsables de leur transfert est d'une importance très grande en termes d'aménagement du territoire et de gestion des dangers naturels. De plus, une corrélation entre des événements pluviométriques et l'occurrence de laves torrentielles n'est pas toujours établie et de nombreux événements torrentiels semblent se déclencher lorsqu'un seuil géomorphologique intrinsèque (degré de remplissage du chenal) au cours d'eau est atteint.Une méthodologie pragmatique a été développée pour cartographier les stocks sédimentaires constituant une source de matériaux pour les laves torrentielles, comme outil préliminaire à la quantification des volumes transportés par ces phénomènes. La méthode s'appuie sur des données dérivées directement d'analyses en environnement SIG réalisées sur des modèles numériques d'altitude de haute précision, de mesures de terrain et d'interprétation de photographies aériennes. La méthode a été conçue pour évaluer la dynamique des transferts sédimentaires, en prenant en compte le rôle des différents réservoirs sédimentaires, par l'application du concept de cascade sédimentaire sous un angle cartographique.Les processus de transferts sédimentaires ont été étudiés dans deux bassins versants des Alpes suisses (torrent du Bruchi, à Blatten beiNaters et torrent du Meretschibach, à Agarn). La cartographie géomorphologique a été couplée avec des mesures complémentaires permettant d'estimer les flux sédimentaires et les taux d'érosion (traçages de peinture, piquets de dénudation et utilisation du LiDAR terrestre). La méthode proposée se révèle innovatrice en comparaison avec la plupart des systèmes de légendes géomorphologiques existants, qui ne sont souvent pas adaptés pour cartographier de manière satisfaisante les systèmes géomorphologiques complexes et actifs que sont les bassins torrentiels. L'intérêt de cette méthode est qu'elle permet l'établissement d'une cascade sédimentaire, mais uniquement pour des systèmes où l'occurrence d'une lave torrentielle est contrôlé par le degré de remplissage en matériaux du chenal. Par ailleurs, le produit cartographique ne peut être directement utilisé pour la création de cartes de dangers - axées sur les zones de dépôt - mais revêt un intérêt pour la mise en place de mesures de correction et pour l'installation de systèmes de monitoring ou d'alerte.La deuxième partie de ce travail de recherche est consacrée à la cartographie géomorphologique. Une analyse a porté sur un échantillon de 146 cartes ou systèmes de légende datant des années 1950 à 2009 et réalisés dans plus de 40 pays. Cette analyse a permis de mettre en évidence la diversité des applications et des techniques d'élaboration des cartes géomorphologiques. - Debris flows are one of the most important vectors of sediment transfer in mountainous areas. Their hydro-geomorphological behaviour is conditioned by geological, geomorphological, topographical, hydrological, climatic and anthropic factors. European research in torrential systems has focused more on hydrological processes than on geomorphological processes acting as debris flow triggers. Nevertheless, the identification of sediment volumes that have the potential to be mobilised in small torrential systems, as well as the recognition of processes responsible for their mobilisation and transfer within the torrential system, are important in terms of land-use planning and natural hazard management. Moreover, a correlation between rainfall and debris flow occurrence is not always established and a number of debris flows seems to occur when a poorly understood geomorphological threshold is reached.A pragmatic methodology has been developed for mapping sediment storages that may constitute source zone of bed load transport and debris flows as a preliminary tool before quantifying their volumes. It is based on data directly derived from GIS analysis using high resolution DEM's, field measurements and aerial photograph interpretations. It has been conceived to estimate sediment transfer dynamics, taking into account the role of different sediment stores in the torrential system applying the concept of "sediment cascade" in a cartographic point of view.Sediment transfer processes were investigated in two small catchments in the Swiss Alps (Bruchi torrent, Blatten bei Naters and Meretschibach torrent, Agarn). Thorough field geomorphological mapping coupled with complementary measurements were conducted to estimate sediment fluxes and denudation rates, using various methods (reference coloured lines, wooden markers and terrestrial LiDAR). The proposed geomorphological mapping methodology is quite innovative in comparison with most legend systems that are not adequate for mapping active and complex geomorphological systems such as debris flow catchments. The interest of this mapping method is that it allows the concept of sediment cascade to be spatially implemented but only for supply-limited systems. The map cannot be used directly for the creation of hazard maps, focused on the deposition areas, but for the design of correction measures and the implementation of monitoring and warning systems.The second part of this work focuses on geomorphological mapping. An analysis of a sample of 146 (extracts of) maps or legend systems dating from the middle of the 20th century to 2009 - realised in more than 40 different countries - was carried out. Even if this study is not exhaustive, it shows a clear renewed interest for the discipline worldwide. It highlights the diversity of applications, techniques (scale, colours and symbology) used for their conception.

Main-Channel Slopes of Selected Streams in Iowa for Estimation of Flood-Frequency Discharges, November 2004

This report describes a statewide study conducted to develop main-channel slope (MCS) curves for 138 selected streams in Iowa with drainage areas greater than 100 square miles. MCS values determined from the curves can be used in regression equations for estimating flood frequency discharges. Multi-variable regression equations previously developed for two of the three hydrologic regions defined for Iowa require the measurement of MCS. Main-channel slope is a difficult measurement to obtain for large streams using 1:24,000-scale topographic maps. The curves developed in this report provide a simplified method for determining MCS values for sites located along large streams in Iowa within hydrologic Regions 2 and 3. The curves were developed using MCS values quantified for 2,058 selected sites along 138 selected streams in Iowa. A geographic information system (GIS) technique and 1:24,000-scale topographic data were used to quantify MCS values for the stream sites. The sites were selected at about 5-mile intervals along the streams. River miles were quantified for each stream site using a GIS program. Data points for river-mile and MCS values were plotted and a best-fit curve was developed for each stream. An adjustment was applied to all 138 curves to compensate for differences in MCS values between manual measurements and GIS quantification. The multi-variable equations for Regions 2 and 3 were developed using manual measurements of MCS. A comparison of manual measurements and GIS quantification of MCS indicates that manual measurements typically produce greater values of MCS compared to GIS quantification. Median differences between manual measurements and GIS quantification of MCS are 14.8 and 17.7 percent for Regions 2 and 3, respectively. Comparisons of percentage differences between flood-frequency discharges calculated using MCS values of manual measurements and GIS quantification indicate that use of GIS values of MCS for Region 3 substantially underestimate flood discharges. Mean and median percentage differences for 2- to 500-year recurrence-interval flood discharges ranged from 5.0 to 5.3 and 4.3 to 4.5 percent, respectively, for Region 2 and ranged from 18.3 to 27.1 and 12.3 to 17.3 percent for Region 3. The MCS curves developed from GIS quantification were adjusted by 14.8 percent for streams located in Region 2 and by 17.7 percent for streams located in Region 3. Comparisons of percentage differences between flood discharges calculated using MCS values of manual measurements and adjusted-GIS quantification for Regions 2 and 3 indicate that the flood-discharge estimates are comparable. For Region 2, mean percentage differences for 2- to 500-year recurrence-interval flood discharges ranged between 0.6 and 0.8 percent and median differences were 0.0 percent. For Region 3, mean and median differences ranged between 5.4 to 8.4 and 0.0 to 0.3 percent, respectively. A list of selected stream sites presented with each curve provides information about the sites including river miles, drainage areas, the location of U.S. Geological Survey stream flowgage stations, and the location of streams Abstract crossing hydro logic region boundaries or the Des Moines Lobe landforms region boundary. Two examples are presented for determining river-mile and MCS values, and two techniques are presented for computing flood-frequency discharges.

The Gibbs free energy of formation of a glass alloy

A simple expression for the Gibbs free energy of formation of a pure component or a eutectic alloy glass, relative to the stable crystalline phase (or phases) at the same temperature is deduced by use of thermodynamic arguments. The expression obtained is supposed to apply to both monocomponent and multicomponent liquid alloys that might become glasses from the supercooled liquid state, irrespective of the critical cooling rate needed to avoid crystallization.

Slow Dynamics of Ising Models with Energy Barriers

Using Monte Carlo simulations we study the dynamics of three-dimensional Ising models with nearest-, next-nearest-, and four-spin (plaquette) interactions. During coarsening, such models develop growing energy barriers, which leads to very slow dynamics at low temperature. As already reported, the model with only the plaquette interaction exhibits some of the features characteristic of ordinary glasses: strong metastability of the supercooled liquid, a weak increase of the characteristic length under cooling, stretched-exponential relaxation, and aging. The addition of two-spin interactions, in general, destroys such behavior: the liquid phase loses metastability and the slow-dynamics regime terminates well below the melting transition, which is presumably related with a certain corner-rounding transition. However, for a particular choice of interaction constants, when the ground state is strongly degenerate, our simulations suggest that the slow-dynamics regime extends up to the melting transition. The analysis of these models leads us to the conjecture that in the four-spin Ising model domain walls lose their tension at the glassy transition and that they are basically tensionless in the glassy phase.

Magnetic hardening mechanisms in Nd-Fe-B nanocrystalline material

Microstructural and magnetic measurements of the evolution by heat treatment of initially amorphous Nd16Fe76B8 alloys prepared by melt spinning are presented. Evidence of magnetic hardening above a threshold temperature induced by magnetic isolation of the Nd2Fe14B grains is provided. A thermodynamic and kinetic explanation of local melting of the intergranular nanostructured Nd¿rich eutectic phase at temperatures below 900 K based on capillary effects is presented. A subsequent Ostwald ripening process moves Nd to wet intimately the hard magnetic grains, becoming, on cooling, a real paramagnetic isolating thin film (~2.5 nm). By using a simple analogy, it is shown that the switching magnetization field in a single¿domain crystal can be drastically affected through the exchange coupling to neighboring grains with different orientation of the easy axis. This effect should be important enough to reinforce the coercive field of polycrystalline hard magnetic materials and explains the observed enhancement from 0.9 to 1.9 T.

Neurological Prognostication after Cardiac Arrest and Therapeutic Hypothermia: a Prospective Validation Study

Introduction: Clinical examination and electroencephalography study (EEG) have been recommended to predict functional recovery in comatose survivors of cardiac arrest (CA), however their prognostic value in patients treated with induced hypothermia (IH) has not been evaluated. Hypothesis: We aimed to validate the prognostic ability of clinical examination and EEG in predicting outcome of patients with coma after CA treated with IH and sought to derive a score with high predictive value for poor functional outcome in this setting. Methods: We prospectively studied 100 consecutive comatose survivors of CA treated with IH. Repeated neurological examination and EEG were performed early after passive rewarming and off sedation. Mortality was assessed at hospital discharge, and functional outcome at 3 to 6 months with Cerebral Performance Categories (CPC), and was dichotomized as good (CPC 1-2) vs. poor (CPC 3-5). Independent predictors of outcome were identified by multivariable logistic regression and used to assess the prognostic value of a Reproducible Electro-clinical Prognosticators of Outcome Score (REPOS). Results: Patients (20/100) with good outcome had all a reactive EEG background. Incomplete recovery of brainstem reflexes, myoclonus, time to return of spontaneous circulation (ROSC) > 25 min, and unreactive EEG background were all independent predictors of death and severe disability, and were added to construct the REPOS. Using a cut-off of 0 or 1 variables for good vs. 2 to 4 for poor outcome, the REPOS had a positive predictive value of 1.00 (95% CI: 0.92-1.00), a negative predictive value of 0.43 (95% CI: 0.29-0.58) and an accuracy of 0.81 for poor functional recovery at 3 to 6 months. Conclusions: In comatose survivors of CA treated with IH, a prognostic score, including clinical and EEG examination, was highly predictive of death and poor functional outcome at 3 to 6 months. Lack of EEG background reactivity strongly predicted poor neurological recovery after CA. Our findings show that clinical and electrophysiological studies are effective in predicting long-term outcome of comatose survivors after CA and IH, and suggest that EEG improves early prognostic assessment in the setting of therapeutic cooling.

Lifetime of an ocean island volcano feeder zone: constraints from U-Pb dating on coexisting zircon and baddeleyite, and 40Ar/39Ar age determinations, Fuerteventura, Canary Islands

High-precision isotope dilution - thermal ionization mass spectrometry (ID-TIMS) U-Pb zircon and baddeleyite ages from the PX1 vertically layered mafic intrusion Fuerteventura, Canary Islands, indicate initiation of magma crystallization at 22.10 +/- 0.07 Ma. The magmatic activity lasted a minimum of 0.52 Ma. Ar-40/Ar-39 amphibole dating yielded ages from 21.9 +/- 0.6 to 21.8 +/- 0.3, identical within errors to the U-Pb ages, despite the expected 1% theoretical bias between Ar-40/Ar-39 and U-Pb dates. This overlap could result from (i) rapid cooling of the intrusion (i. e., less than the 0.3 to 0.6 Ma 40Ar/39Ar age uncertainties) from closure temperatures (T-c) of zircon (699-988 degrees C) to amphibole (500-600 degrees C); (ii) lead loss affecting the youngest zircons; or (iii) excess argon shifting the plateau ages towards older values. The combination of the Ar-40/Ar-39 and U/Pb datasets implies that the maximum amount of time PX1 intrusion took to cool below amphibole T-c is 0.8 Ma, suggesting PX1 lifetime of 520 000 to 800 000 Ma. Age disparities among coexisting baddeleyite and zircon (22.10 +/- 0.07/0.08/0.15 Ma and 21.58 +/- 0.15/0.16/0.31 Ma) in a gabbro sample from the pluton margin suggest complex genetic relationships between phases. Baddeleyite is found preserved in plagioclase cores and crystallized early from low silica activity magma. Zircon crystallized later in a higher silica activity environment and is found in secondary scapolite and is found close to calcite veins, in secondary scapolite that recrystallised from plagioclase. close to calcite veins. Oxygen isotope delta O-18 values of altered plagioclase are high (+7.7), indicating interaction with fluids derived from host-rock carbonatites. The coexistence of baddeleyite and zircon is ascribed to interaction of the PX1 gabbro with CO2-rich carbonatite-derived fluids released during contact metamorphism.