Is the Helmholtz equation really sign-indefinite?

The usual variational (or weak) formulations of the Helmholtz equation are sign-indefinite in the sense that the bilinear forms cannot be bounded below by a positive multiple of the appropriate norm squared. This is often for a good reason, since in bounded domains under certain boundary conditions the solution of the Helmholtz equation is not unique at wavenumbers that correspond to eigenvalues of the Laplacian, and thus the variational problem cannot be sign-definite. However, even in cases where the solution is unique for all wavenumbers, the standard variational formulations of the Helmholtz equation are still indefinite when the wavenumber is large. This indefiniteness has implications for both the analysis and the practical implementation of finite element methods. In this paper we introduce new sign-definite (also called coercive or elliptic) formulations of the Helmholtz equation posed in either the interior of a star-shaped domain with impedance boundary conditions, or the exterior of a star-shaped domain with Dirichlet boundary conditions. Like the standard variational formulations, these new formulations arise just by multiplying the Helmholtz equation by particular test functions and integrating by parts.

Available potential energy density for a multicomponent Boussinesq fluid with arbitrary nonlinear equation of state

In this paper, the concept of available potential energy (APE) density is extended to a multicomponent Boussinesq fluid with a nonlinear equation of state. As shown by previous studies, the APE density is naturally interpreted as the work against buoyancy forces that a parcel needs to perform to move from a notional reference position at which its buoyancy vanishes to its actual position; because buoyancy can be defined relative to an arbitrary reference state, so can APE density. The concept of APE density is therefore best viewed as defining a class of locally defined energy quantities, each tied to a different reference state, rather than as a single energy variable. An important result, for which a new proof is given, is that the volume integrated APE density always exceeds Lorenz’s globally defined APE, except when the reference state coincides with Lorenz’s adiabatically re-arranged reference state of minimum potential energy. A parcel reference position is systematically defined as a level of neutral buoyancy (LNB): depending on the nature of the fluid and on how the reference state is defined, a parcel may have one, none, or multiple LNB within the fluid. Multiple LNB are only possible for a multicomponent fluid whose density depends on pressure. When no LNB exists within the fluid, a parcel reference position is assigned at the minimum or maximum geopotential height. The class of APE densities thus defined admits local and global balance equations, which all exhibit a conversion with kinetic energy, a production term by boundary buoyancy fluxes, and a dissipation term by internal diffusive effects. Different reference states alter the partition between APE production and dissipation, but neither affect the net conversion between kinetic energy and APE, nor the difference between APE production and dissipation. We argue that the possibility of constructing APE-like budgets based on reference states other than Lorenz’s reference state is more important than has been previously assumed, and we illustrate the feasibility of doing so in the context of an idealised and realistic oceanic example, using as reference states one with constant density and another one defined as the horizontal mean density field; in the latter case, the resulting APE density is found to be a reasonable approximation of the APE density constructed from Lorenz’s reference state, while being computationally cheaper.

An historical perspective on the development of the thermodynamic equation of seawater - 2010

Oceanography is concerned with understanding the mechanisms controlling the movement of seawater and its contents. A fundamental tool in this process is the characterization of the thermophysical properties of seawater as functions of measured temperature and electrical conductivity, the latter used as a proxy for the concentration of dissolved matter in seawater. For many years a collection of algorithms denoted the Equation of State 1980 (EOS-80) has been the internationally accepted standard for calculating such properties. However, modern measurement technology now allows routine observations of temperature and electrical conductivity to be made to at least one order of magnitude more accurately than the uncertainty in this standard. Recently, a new standard has been developed, the Thermodynamical Equation of Seawater 2010 (TEOS-10). This new standard is thermodynamically consistent, valid over a wider range of temperature and salinity, and includes a mechanism to account for composition variations in seawater. Here we review the scientific development of this standard, and describe the literature involved in its development, which includes many of the articles in this special issue.

Post-normal science and the art of nature conservation

Nature conservation may be considered a post-normal science in that the loss of biodiversity and increasing environmental degradation require urgent action but are characterised by uncertainty at every level. An ‘extended peer community’ with varying skills, perceptions and values are involved in decision-making and implementation of conservation, and the uncertainty involved limits the effectiveness of practice. In this paper we briefly review the key ecological, philosophical and methodological uncertainties associated with conservation, and then highlight the uncertainties and gaps present within the structure and interactions of the conservation community, and which exist mainly between researchers and practitioners, in the context of nature conservation in the UK. We end by concluding that an openly post-normal science framework for conservation, which acknowledges this uncertainty but strives to minimise it, would be a useful progression for nature conservation, and recommend ways in which knowledge transfer between researchers and practitioners can be improved to support robust decision making and conservation enactment.

The identity of crop pollinators helps target conservation for improved ecosystem services

Insect pollinated mass flowering crops are becoming more widespread and there is a need to understand which insects are primarily responsible for the pollination of these crops so conservation measures can be appropriately targeted in the face of pollinator declines. This study used field surveys in conjunction with cage manipulations to identify the relative contributions of different pollinator taxa to the pollination of two widespread flowering crops, field beans and oilseed rape. Flower visiting pollinator communities observed in the field were distinct for each crop; while field beans were visited primarily by a few bumblebee species, multiple pollinator taxa visited oilseed, and the composition of this pollinator community was highly variable spatially and temporally. Neither pollinator community, however, appears to be meeting the demands of crops in our study regions. Cage manipulations showed that multiple taxa can effectively pollinate both oilseed and field beans, but bumblebees are particularly effective bean pollinators. Combining field observations and cage manipulations demonstrated that the pollination demands of these two mass flowering crops are highly contrasting, one would benefit from management to increase the abundance of some key taxa, whilst for the other, boosting overall pollinator abundance and diversity would be more appropriate. Our findings highlight the need for crop specific mitigation strategies that are targeted at conserving specific pollinator taxa (or group of taxa) that are both active and capable of crop pollination in order to reduce pollination deficits and meet the demands of future crop production.

Costing conservation: an expert appraisal of the pollinator habitat benefits of England’s entry level stewardship

Pollination services provided by insects play a key role in English crop production and wider ecology. Despite growing evidence of the negative effects of habitat loss on pollinator populations, limited policy support is available to reverse this pressure. One measure that may provide beneficial habitat to pollinators is England’s entry level stewardship agri-environment scheme. This study uses a novel expert survey to develop weights for a range of models which adjust the balance of Entry Level Stewardship options within the current area of spending. The annual costs of establishing and maintaining these option compositions were estimated at £59.3–£12.4 M above current expenditure. Although this produced substantial reduction in private cost:benefit ratios, the benefits of the scheme to pollinator habitat rose by 7–140 %; significantly increasing the public cost:benefit ratio. This study demonstrates that the scheme has significant untapped potential to provide good quality habitat for pollinators across England, even within existing expenditure. The findings should open debate on the costs and benefits of specific entry level stewardship management options and how these can be enhanced to benefit both participants and biodiversity more equitably.

Instantaneous gelation in Smoluchowski’s coagulation equation revisited

We study the solutions of the Smoluchowski coagulation equation with a regularization term which removes clusters from the system when their mass exceeds a specified cutoff size, M. We focus primarily on collision kernels which would exhibit an instantaneous gelation transition in the absence of any regularization. Numerical simulations demonstrate that for such kernels with monodisperse initial data, the regularized gelation time decreasesas M increases, consistent with the expectation that the gelation time is zero in the unregularized system. This decrease appears to be a logarithmically slow function of M, indicating that instantaneously gelling kernels may still be justifiable as physical models despite the fact that they are highly singular in the absence of a cutoff. We also study the case when a source of monomers is introduced in the regularized system. In this case a stationary state is reached. We present a complete analytic description of this regularized stationary state for the model kernel, K(m1,m2)=max{m1,m2}ν, which gels instantaneously when M→∞ if ν>1. The stationary cluster size distribution decays as a stretched exponential for small cluster sizes and crosses over to a power law decay with exponent ν for large cluster sizes. The total particle density in the stationary state slowly vanishes as [(ν−1)logM]−1/2 when M→∞. The approach to the stationary state is nontrivial: Oscillations about the stationary state emerge from the interplay between the monomer injection and the cutoff, M, which decay very slowly when M is large. A quantitative analysis of these oscillations is provided for the addition model which describes the situation in which clusters can only grow by absorbing monomers.

Achieving production and conservation simultaneously in tropicalagricultural landscapes

Increasing population size and demand for food in the developing world is driving the intensification ofagriculture, often threatening the biodiversity within the farmland itself and in the surrounding land-scape. This paper quantifies bird and tree species richness, tree carbon and farmer’s gross income, andinteractions between these four variables, across an agricultural gradient in central Uganda. We showedthat higher cultivation intensities in farmed landscapes resulted in increased income but also a declinein species richness of birds and trees, and reductions in tree carbon storage. These declines were particu-larly marked with a shift from high intensity smallholder mixed cropping to plantation style agriculture.This was especially evident for birds where significant declines only occurred in plantations. Small scalefarming will likely continue to be a key source of cash income for the rural populations, and ensuring‘sustained agricultural growth’ within such systems while minimising negative impacts on biodiversityand other key ecosystem services will be a major future challenge.

Science-based conservation and management in wetland archaeology: the example of Sutton Common, UK

This paper addresses the perception of different wetlands in and around the Humber estuary in the Bronze Age. Combining past and current research, it will be argued that the perception of intertidal wetlands was nearly diametrically opposed to the perception of riverine floodplains. This contrasting perception is reflected in the material culture of the Bronze Age, and may be explained through the particular manner in which landscapes changed following marine transgressions. This work was largely undertaken within the framework of the Humber Wetlands Survey, an integrated archaeological and palaeoenvironmental research programme funded by English Heritage since 1992

The elliptic sine-Gordon equation: a nonlinear elliptic integrable PDE

In this paper, we summarise this recent progress to underline the features specific to this nonlinear elliptic case, and we give a new classification of boundary conditions on the semistrip that satisfy a necessary condition for yielding a boundary value problem can be effectively linearised. This classification is based on formulation the equation in terms of an alternative Lax pair.

Estimating Lorenz's reference state in an ocean with a nonlinear equation of state for seawater

The study of the mechanical energy budget of the oceans using Lorenz available potential energy (APE) theory is based on knowledge of the adiabatically re-arranged Lorenz reference state of minimum potential energy. The compressible and nonlinear character of the equation of state for seawater has been thought to cause the reference state to be ill-defined, casting doubt on the usefulness of APE theory for investigating ocean energetics under realistic conditions. Using a method based on the volume frequency distribution of parcels as a function of temperature and salinity in the context of the seawater Boussinesq approximation, which we illustrate using climatological data, we show that compressibility effects are in fact minor. The reference state can be regarded as a well defined one-dimensional function of depth, which forms a surface in temperature, salinity and density space between the surface and the bottom of the ocean. For a very small proportion of water masses, this surface can be multivalued and water parcels can have up to two statically stable levels in the reference density profile, of which the shallowest is energetically more accessible. Classifying parcels from the surface to the bottom gives a different reference density profile than classifying in the opposite direction. However, this difference is negligible. We show that the reference state obtained by standard sorting methods is equivalent, though computationally more expensive, to the volume frequency distribution approach. The approach we present can be applied systematically and in a computationally efficient manner to investigate the APE budget of the ocean circulation using models or climatological data.

A traceable physical calibration of the vertical advection-diffusion equation for modelling ocean heat uptake

The classic vertical advection-diffusion (VAD) balance is a central concept in studying the ocean heat budget, in particular in simple climate models (SCMs). Here we present a new framework to calibrate the parameters of the VAD equation to the vertical ocean heat balance of two fully-coupled climate models that is traceable to the models’ circulation as well as to vertical mixing and diffusion processes. Based on temperature diagnostics, we derive an effective vertical velocity w∗ and turbulent diffusivity k∗ for each individual physical process. In steady-state, we find that the residual vertical velocity and diffusivity change sign in mid-depth, highlighting the different regional contributions of isopycnal and diapycnal diffusion in balancing the models’ residual advection and vertical mixing. We quantify the impacts of the time-evolution of the effective quantities under a transient 1%CO2 simulation and make the link to the parameters of currently employed SCMs.