MAPEAMENTO E CARACTERIZAÇÃO DE FERRAMENTAS DE TECNOLOGIA DA INFORMAÇÃO NA CADEIA DE SUPRIMENTOS

Nos últimos tempos a utilização da Tecnologia da Informação tem-se tornado uma regra, principalmente em aplicações como na Gestão da Cadeia de Suprimentos, onde a informação passou a fazer parte do elo entre as empresas que integram esta Cadeia. A combinação de diferentes tecnologias tornou isso possível, pois empresas utilizam a Tecnologia da Informação de maneira diversificada, visando tirar melhor proveito dessa tecnologia. O presente Trabalho tem como objetivo mapear e caracterizar as diferentes Tecnologias da Informação utilizadas na Gestão da Cadeia de Suprimentos e determinar os principais fatores que as levaram a utilizar esta tecnologia. Identificou-se as principais Tecnologias da Informação normalmente encontradas na Gestão da Cadeia de Suprimentos, bem como um modelo teórico foi construído. A partir do modelo teórico desenvolveu-se um instrumento de pesquisa do tipo survey.. Utilizou-se também a prova Q de Cochran para avaliar se há diferenças na utilização da tecnologia da informação entre os diferentes tipos de empresas e apresentar os fatores que levaram as empresas a utilizarem a Tecnologia da Informação.

USO DE TEORIAS NO CAMPO DE SISTEMAS DE INFORMAÇÃO: MAPEAMENTO USANDO TÉCNICAS DE MINERAÇÃO DE TEXTOS

Esta dissertação visa apresentar o mapeamento do uso das teorias de sistemas de informações, usando técnicas de recuperação de informação e metodologias de mineração de dados e textos. As teorias abordadas foram Economia de Custos de Transações (Transactions Costs Economics TCE), Visão Baseada em Recursos da Firma (Resource-Based View-RBV) e Teoria Institucional (Institutional Theory-IT), sendo escolhidas por serem teorias de grande relevância para estudos de alocação de investimentos e implementação em sistemas de informação, tendo como base de dados o conteúdo textual (em inglês) do resumo e da revisão teórica dos artigos dos periódicos Information System Research (ISR), Management Information Systems Quarterly (MISQ) e Journal of Management Information Systems (JMIS) no período de 2000 a 2008. Os resultados advindos da técnica de mineração textual aliada à mineração de dados foram comparadas com a ferramenta de busca avançada EBSCO e demonstraram uma eficiência maior na identificação de conteúdo. Os artigos fundamentados nas três teorias representaram 10% do total de artigos dos três períodicos e o período mais profícuo de publicação foi o de 2001 e 2007.(AU)

O PERFIL DOS USUÁRIOS DA COMUNICAÇÃO MEDIADA POR COMPUTADOR UMA ABORDAGEM PSICOLÓGICA

A Comunicação Mediada por Computador (CMC) é entendida como o relacionamento interpessoal via Internet. Este modo de comunicação atinge usuários que visam interagir e conhecer pessoas sem o limite da distância. Atualmente está sendo objeto de estudos interdisciplinares que se interessam pelas influências da CMC no comportamento de seus usuários. Trata-se de um estudo caracterizado como exploratório baseado em dados coletados através de uma pesquisa bibliográfica. Seu objetivo é refletir sobre os efeitos gerados pela difusão da CMC sobre o perfil de seus usuários, além de apresentar as contribuições da Psicologia frente aos questionamentos provindos da utilização da CMC e discutir as ambivalências (ganhos e perdas) de seu uso no comportamento de seus usuários. Percebe-se que os internautas estão transformando a forma de interação social em um ambiente desprovido de limites espaço-temporais. Portanto, este trabalho estuda as novas formas de interação, e busca compreender esse novo homem, pois, se a tecnologia traz mudanças, o indivíduo muda junto com ela. Portanto, ao acompanhar todas essas transformações que têm influenciado o homem e suas novas formas de relacionamento, estão motivando o surgimento de novas formas de contribuição da Psicologia ao estudo da CMC.

Comunicação, Valores Comunitários e Sustentabilidade: os portais da UMESP, FEI e FSA.

Este trabalho analisou a relação entre comunicação e sustentabilidade em universidades comunitárias no Estado de São Paulo associadas à ABRUC (Associação Brasileira das Universidades Comunitárias). O objetivo foi examinar a imagem das universidades, a partir das estratégias de comunicação utilizadas nos portais institucionais. Procurou entender se e como utilizam o diferencial de caráter comunitário no marketing institucional. A pesquisa é de natureza qualitativa, tendo como metodologia central o estudo de caso múltiplos de Yin (2005). Foram também utilizados alguns dos aspectos da Análise de Conteúdo de Bardin (2006) para a categorização dos termos que identificam os valores comunitários. Os portais das universidades comunitárias localizadas na região do ABC paulista (Universidade Metodista do Estado de São Paulo UMESP, Centro Universitário Engenharia Industrial FEI e Centro Universitário Fundação Santo André FSA), se constituem no corpus principal desta pesquisa. A técnica para a análise dos portais foi estruturada a partir do trabalho de Vilella (2003). Foram avaliados aspectos voltados para a facilidade da navegação no uso das informações, tais como: usabilidade, funcionalidade e conteúdo. O período para a coleta de dados foi de um mês, assim distribuído: uma semana durante o período de inscrições para o vestibular e três semanas no início do período letivo do ano de 2008. Como parte da análise da construção da imagem institucional foi também verificado, a partir dos resultados econômicos e financeiros, se existe correlação entre a política de comunicação das instituições comunitárias e a sustentabilidade financeira. Os principais resultados foram: a) não existe uma visibilidade clara dos valores comunitários nos portais institucionais; b) os portais seguem os padrões tradicionais, sem incorporar as inovações tecnológicas, que garantam visibilidade e transparência nas ações das instituições; c) existe correlação entre os resultados econômico-financeiros e o diferencial comunitário como estratégia de comunicação e sustentabilidade das instituições.(AU)

JUVENTUDE, EDUCAÇÃO ESCOLAR E SENTIDO DE VIDA: UM ESTUDO A PARTIR DOS PROJETOS EDUCACIONAIS NO ENSINO MÉDIO

Este estudo parte de uma reflexão sobre a juventude atual e as imagens sócioideológicas construídas em torno desta fase do desenvolvimento humano, com a intenção de reforçar a importância dos espaços educacionais, principalmente das escolas formais, na construção do sentido de vida dos alunos, jovens e adolescentes do Ensino Médio. A juventude é uma etapa da vida que tem sido socialmente considerada, na maioria das vezes, como uma fase problemática, o que tem levado alguns adultos, pais ou professores, a não acreditarem e investirem nas potencialidades dos jovens adolescentes, dificultando sua inserção social de forma mais dinâmica e otimista. O corpo teórico desta pesquisa foi composto pelo conceito de sentido de vida, em Viktor Frankl, perpassando pela concepção de uma educação dialógica, em Paulo Freire, pelo conceito de complexidade, em Edgar Morin, e pela proposta do trabalho educacional por projetos, em Fernando Hernández. Como instrumentos metodológicos, foram utilizados a observação participante, técnicas de análise de questionários exploratórios e grupo focal. A análise dos dados permitiu reconhecer o impacto da proposta do trabalho educacional por projetos, no sentido de contribuir para que a juventude tenha vários elementos para trabalhar aspectos concretos da vida humana, principalmente, naquilo que diz respeito à construção do sentido de vida.(AU)

Avaliação da influência de cinza da casca de arroz em cimentos para poços de petróleo submetidos à injeção de vapor

Reservoirs that present highly viscous oils require methods to aid in their recovery to the surface. The elev ated oil viscosity hinders its flow through porous media and conventional recovery methods have not obtained significant efficiency. As such, the injection of steam into the reservoir through an injection well has been the most widely used method of therma l recovery, for it allows elevated volumes of recovery due to the viscosity reduction of the oil, facilitating the oil’s mobility within the rock formation and consequently into the production well where it will be exploited. On the other hand, the injecti on of vapor not only affects the fluids found in the rock pores, but the entire structure that composes the well where it is injected due to the high temperatures used in the process. This temperature increment is conducted to the cement, found in the annu lus, responsible for the isolation of the well and the well casing. Temperatures above 110 ̊C create new fazes rich in calcium in the cement matrix, resulting in the reduction of its permeability and the consequential phenomenon of mechanical resistance ret rogression. These alterations generate faults in the cement, reducing the well’s hydraulic isolation, creating insecurity in the operations in which the well will be submitted as well as the reduction of its economic life span. As a way of reducing this re trograde effect, this study has the objective of evaluating the incorporation of rice husk ash as a mineral additive substitute of silica flour , commercially utilized as a source of silica to reduce the CaO/SiO 2 ratio in the cement pastes submitted to high temperatures in thermal recovery. Cement pastes were formulated containing 20 and 30% levels of ash, apart from the basic paste (water + cement) and a reference paste (water + cement + 40% silica flour) for comparison purposes. The tests were executed th rough compression resistance tests, X - Ray diffraction (XRD) techniques, thermogravimetry (TG), scanning electron microscopy (SEM) and chemical anal ysis BY X - ray fluorescence (EDS) on the pastes submitted to cure at low temperatures (45 ̊C) for 28 days following a cure at 280 ̊C and a pressure of 2,000 PSI for 3 days, simulating vapor injection. The results obtained show that the paste containing 30% r ice shell ash is satisfactory, obtaining mechanical resistance desired and equivalent to that of the paste containing 40% silica flour, since the products obtained were hydrated with low CaO/SiO 2 ratio, like the Tobermorita and Xonotlita fases, proving its applicability in well subject to vapor injection.

Desenvolvimento de pastas cimentantes contendo nanossílica como material estendedor para aplicação em fases iniciais, de poços petrolíferos, submetidas à baixa temperatura (5°c ± 3ºc)

The improved performance of hydraulic binders, the base of Portland cement, consists in the careful selection and application of materials that promote greater durability and reduced maintenance costs There is a wide variety of chemical additives used in Portland cement slurries for cementing oil wells. These are designed to work in temperatures below 0 ° C (frozen areas of land) to 300 ° C (thermal recovery wells and geothermal); pressure ranges near ambient pressure (in shallow wells) to greater than 200 MPa (in deep wells). Thus, additives make possible the adaptation of the cement slurries for application under various conditions. Among the materials used in Portland cement slurry, for oil wells, the materials with nanometer scale have been applied with good results. The nanossílica, formed by a dispersion of SiO2 particles, in the nanometer scale, when used in cement systems improves the plastic characteristics and mechanical properties of the hardened material. This dispersion is used commercially as filler material, modifier of rheological properties and / or in recovery processes construction. It is also used in many product formulations such as paints, plastics, synthetic rubbers, adhesives, sealants and insulating materials Based on the above, this study aims to evaluate the performance of nanossílica as extender additive and improver of the performance of cement slurries subjected to low temperatures (5 ° C ± 3 ° C) for application to early stages of marine oil wells. Cement slurries were formulated, with densities 11.0;12.0 and 13.0 ppg, and concentrations of 0; 0.5, 1.0 and 1.5%. The cement slurries were subjected to cold temperatures (5 ° C ± 3 ° C), and its evaluation performed by tests rheological stability, free water and compressive strength in accordance with the procedures set by API SPEC 10A. Thermal characterization tests (TG / DTA) and crystallographic (XRD) were also performed. The use of nanossílica promoted reduction of 30% of the volume of free water and increased compression resistance value of 54.2% with respect to the default cement slurry. Therefore, nanossílica presented as a promising material for use in cement slurries used in the early stages of low-temperature oil wells

Avaliação de compatibilidade entre pasta de cimento e fluido de perfuração não-aquoso utilizados em poços petrolíferos

Compatibility testing between a drilling fluid and a cement slurry is one of the steps before an operation of cementing oil wells. This test allows us to evaluate the main effects that contamination of these two fluids may cause the technological properties of a cement paste. The interactions between cement paste and drilling fluid, because its different chemical compositions, may affect the cement hydration reactions, damaging the cementing operation. Thus, we carried out the study of the compatibility of non-aqueous drilling fluid and a cement slurry additives. The preparation procedures of the non-aqueous drilling fluid, the cement paste and completion of compatibility testing were performed as set out by the oil industry standards. In the compatibility test is evaluated rheological properties, thickening time, stability and compressive strength of cement pastes. We also conducted analyzes of scanning electron microscopy and X-ray diffraction of the mixture obtained by the compatibility test to determine the microstructural changes in cement pastes. The compatibility test showed no visual changes in the properties of the cement paste, as phase separation. However, after the addition of nonaqueous drilling fluid to cement slurry there was an increased amount of plastic viscosity, the yield point and gel strength. Among the major causative factors can include: chemical reaction of the components present in the non-aqueous drilling fluid as the primary emulsifier, wetting agent and paraffin oil, with the chemical constituents of the cement. There was a reduction in the compressive strength of the cement paste after mixing with this drilling fluid. Thickening test showed that the oil wetting agent and high salinity of the non-aqueous fluid have accelerating action of the handle of the cement paste time. The stability of the cement paste is impaired to the extent that there is increased contamination of the cement slurry with the nonaqueous fluid. The X-ray diffraction identified the formation of portlandite and calcium silicate in contaminated samples. The scanning electron microscopy confirmed the development of the identified structures in the X-ray diffraction and also found the presence of wells in the cured cement paste. The latter, formed by the emulsion stability of the drilling fluid in the cement paste, corroborate the reduction of mechanical strength. The oil wetting agent component of the non-aqueous drilling fluid, the modified cement hydration processes, mainly affecting the setting time.

Estudo da incorporação de resíduos de perfuração para aplicação em cimentação de poços de petróleo

During the drilling of oil and natural gas are generated solid waste, liquid and gaseous. These solid fragments, which are known as cuttings, are carried to the surface through the drilling fluid. Furthermore, this fluid serves to cool the bit, keeping the internal pressure of the well, and others. This solid residue is very polluting, because it has incorporated beyond the drilling fluid, which has several chemical additives harmful to the environment, some heavy metals that are harmful to the environment, such as lead. To minimize the residue generated, are currently being studied numerous techniques to mitigate the problems that such waste can cause to the environment, like addition of cuttings in the composition of soil cement brick masonry construction, addition of cuttings on the clay matrix for the manufacture of solid masonry bricks and ceramic blocks and coprocessing of the cuttings in cement. So, the main objective of this work is the incorporation of cuttings drilling of oil wells, the cement slurry used in the cementing operation of the well. This cuttings used in this study, arising from the formation Pendências, was milled and separated in a sieve of 100 mesh. After grinding had a mean particle sike in order of 86 mm and crystal structure containing phases of quartz and calcite type, characteristic of the Portland cement. Were formulated and prepared slurries of cement with density 13 lb / gal, containing different concentrations of gravel, and realized characterization tests API SPEC 10A and RP 10B. Free water tests showed values lower than 5.9% and the rheological model that best described the behavior of the mixtures was the power. The results of compressive strength (10.3 MPa) and stability (Dr <0.5 lb / gal) had values within the set of operational procedures. Thus, the gravel from the drilling operation, may be used as binders in addition to Portland cement oil wells, in order to reuse this waste and reduce the cost of the cement paste.

Síntese de carreadores de oxigênio à base de Ni e Co para estudo do processo de Chemical Looping usando CH4 como combustível

Increasing energy demand is being met largely by fossil fuel reserves, which emit CO2, SOx gases and various other pollutants. So does the search for fuels that emit fewer pollutants and have the same energy efficiency. In this context, hydrogen (H2) has been increasingly recognized as a potential carrier of energy for the near future. This is because the H2 can be obtained by different routes and has a wide application area , in addition to having clean burning, generating only H2O as a product of combustion , and higher energy density per unit mass . The Chemical Looping Reforming process (CLR) has been extensively investigated in recent years, it is possible to regenerate the catalyst by applying cycles of reduction and oxidation. This work has as main objective to develop catalysts based on nickel and cobalt to study the reactivity of reform with chemical recycling process. The catalysts were prepared by three different methods: combustion assisted by microwave, wet impregnation and co-precipitation. All catalysts synthesized have the same amount by weight of the active phases (60% w / w). The other 40 % m/m consists in La2O3 (8% w / w), Al2O3 (30% w / w) and MgO (2%). Oxygen carriers have been named as follows: N or C, nickel or cobalt, followed by the number 3 or 6, meaning 30 to 60% of active phase in the oxide form and C, CI or CP, which means self-combustion assisted by microwave, self-combustion assisted by microwave followed by wet impregnation and co-precipitation. The oxygen carriers were then characterized by the techniques of X-ray diffraction (XRD), surface area (BET), temperature programmed reduction (TPR) and scanning electron microscopy (SEM). The characterization results showed that the different synthesis methods have led to obtaining different morphologies and structures. Redox tests using CH4 as reducing agent and sintetic air as oxidant agent was done with N6C and C6C, N6CI and C6CI and N6CP and C6CP oxygen carriers. The tests revealed different behaviors, depending on active phase and on synthesis procedure. N6C oxygen carrier produced high levels of H2. The C6CI oxygen carrier produced CO2 and H2O without carbon deposits.

A reportagem nas rádios comerciais de Natal-RN

This thesis aims to investigate the space of radio reporting and production conditions in radio newscasts in commercial stations operating in modulated frequency (FM) in the city of Natal, Rio Grande do Norte. Through preliminary empirical observation, it was observed that this journalistic style (radio reportage) is hardly present in the schedule of local commercial radio stations, with a lack of in-depth news coverage. The research is based on the content broadcast in four daily radio news programs transmitted by commercial stations. It raises the hypothesis that the crisis that cuts across journalistic companies could be justified by the lack of financial funding in in-depth news reporting. The starting point for the case study (Yin, 2005) was a bibliographical research, for building a theoretical model of reference for the studied style, based on Prado (1989), Bespalhok (2006), Meditsch (2007), Lopes (2013) and Ferraretto (2014). The methodology also included listening to content broadcast during a week in the four analyzed news programs, participant observation and interviews with professionals who produce these programs. There were eight events with similar characteristics to radio reporting, all broadcast in just one of the analyzed programs. According to the interviewees, the format is rarely used because it would generate high businesses costs, which are prohibitively high for the stations. The research also inferred that besides the lack of entrepreneurial vision, there is accommodation of the professionals who could produce news stories even with little structure available. Finally, this work points out the need to invest more on local radio journalism to improve the quality of the information provided on commercial broadcasters in Natal and the training of journalism students to use radio's potential to maximum use.

Utilização da cinza da casca de arroz em cimentação de poços de petróleo

Pozzolanic materials such as rice husk ash are widely used to substitute part of cement, because they react with calcium hydroxide (CH) producing calcium silicate hydrate (C-S-H), which aggregate better physical, chemical and mechanical properties to the cement slurry. The usage of rice husk biomass ash from agribusiness in addition to or partially replacing cement is a noble purpose and a good way of sustainable development which currently is an obsession around the world. The ashes utilized in this study were characterized by: scanning electron microscopy technique (SEM), Fourier transform infrared spectroscopy (FTIR), Energy-dispersive X-ray spectroscopy (EDX) and BET method. The pozzolanic activity of RHA and WRHA in cement slurries was evaluated by: thermal-gravimetric technique and derivative thermogravimetry (TGA/DTG), X-ray diffraction (XRD) and Compressive Strength. The slurries formulated with additions of 10% and 20% of RHA and WRHA were cured for 28 days at 58 °C. The results of thermal analysis demonstrated that a 20% WRHA addition caused a reduction of approximately 73% of Portlandite (calcium hydroxide – CH) phase related to standard slurry (STD). The XRD scans also demonstrated the reduction of the Portlandite peaks’ intensity for each slurry compared with STD slurry. The RHA and WRHA react chemically with Portlandite producing calcium silicate hydrate (C-S-H), confirming their effect as a pozzolanic agent. The WRHA presented the best results as a pozzolanic material.

Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

Formulação de pasta de cimento flexível utilizando planejamento experimental

Steam injection is an oil recovery method accomplished by introducing steam directly into the oil well to the reservoir. The steam causes dilation of the casing, which, after reduction in temperature, tends to return to the initial dimensions: causing the formation of cracks in the cement and loss of hydraulic isolation.. In this context, the type of the SBR latex is used to improve the flexibility of the cement matrix by reducing the amount of fatigue failure. To prevent these failures, the mechanical resistance parameters should be carefully adjusted to well conditions. This work aims to study the mechanical behavior of cement slurry systems additivated with SBR latex for cementing oil wells subject to steam injection. Through the central composite factorial design was studied the behavior of the compressive strength by varying the density of the paste between 1.75 g /cm³ (14.6 lb/ Gal) and 1.89 g/cm³ (15,8lb / Gal), curing time between 4 days and 28 days and concentration of SBR Latex between 0 L / m³ and 534.722 L / m³ (0 gpc and 4 gpc). The results showed that increasing the concentration of SBR latex, within the given ranges, there was a decreased compression resistance and elastic modulus by increasing the elastic deformability of the slurry. From the results it can determine best slurries formulation conditions in oil well cementing operations subject to steam injection.