Evaluation of the physical and chemical properties of two commercial and three experimental root-end filling materials

Objective. The aim of this study was to evaluate the pH, calcium release, setting time, and solubility of two commercially available mineral trioxide aggregate (MTA) cements (white MTA Angelus and MTA Bio), and of three experimental cements (light-cured MTA, Portland cement with 20% bismuth oxide and 5% calcium sulfate, and an epoxy resin-based cement).Study design. For evaluation of pH and calcium ion release, polyethylene tubes with 1.0 mm internal diameter and 10.0 mm length were filled with the cements and immediately immersed in flasks containing 10 mL deionized water. After 3, 24, 72, and 168 hours, the tubes were removed and the water from the previous container was measured for its pH and calcium content with a pH meter and an atomic absorption spectrophotometer. For analysis of the setting time, Gilmore needles weighing 100 g and 456.5 g were used, in accordance with the American Society for Testing and Materials specification no. C266-03. Solubility of each cement was also tested.Results. All the cements were alkaline and released calcium ions, with a declining trend over time. After 3 hours, Portland cement + bismuth oxide and MTA Bio had the highest pH and light-cured MTA the lowest. After 1 week, MTA Bio had the highest pH and light-cured MTA and epoxy resin-based cement the lowest. Regarding calcium ion release, after 3 hours, Portland cement + bismuth oxide showed the highest release. After 1 week, MTA Bio had the highest. Epoxy resin-based cement and light-cured MTA had the lowest calcium release in all evaluation periods. Regarding setting times, white MTA Angelus and MTA Bio had the shortest, Portland cement + bismuth oxide had an intermediate setting time, and the epoxy resin-based cement had the longest. The materials that showed the lowest solubility values were the epoxy resin-based cement, Portland cement + bismuth oxide, and light-cured MTA. The highest solubility values were presented in white MTA Angelus and MTA Bio.Conclusions. The white MTA Angelus and MTA Bio had the shortest setting times, higher pH and calcium ion release, and the highest solubility. In contrast, the epoxy resin-based cement and light-cured MTA showed lower values of solubility, pH, and calcium ion release. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 110: 250-256)

Effect of Ultrasonic Activation on pH and Calcium Released by Calcium Hydroxide Pastes in Simulated External Root Resorption

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antibacterial efficacy of endodontic irrigating solutions and their combinations in root canals contaminated with Enterococcus faecalis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiopacity of Portland Cement Associated With Different Radiopacifying Agents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Radiopacity evaluation of root-end filling materials by digitization of images

The purpose of this study was to evaluate the radiopacity of 5 root-end filling materials (white MTA-Angelus, grey MTA-Angelus, IRM, Super EBA and Sealer 26). Five specimens (10 mm diameter X 1 mm thickness) were made from each material and radiographed next to an aluminum stepwedge varying in thickness from 2 to 16 mm. Radiographs were digitized and the radiopacity of the materials was compared to that of the aluminum stepwedge using VIXWIN 2000 software in millimeters of aluminum ( mm Al). Data were analyzed statistically by ANOVA and Tukey's test at 5% significance level. Radiopacity values varied from 3 mm Al to 5.9 mm Al. Sealer 26 and IRM presented the highest radiopacity values (p<0.05), while white/grey MTA and Super EBA presented the lowest radiopacity values (p<0.05). The tested root- end filling materials presented different radiopacities, white/grey MTA and Super EBA being the least radiopaque materials.

Evaluation of pH and Calcium Ion Release of Root-end Filling Materials Containing Calcium Hydroxide or Mineral Trioxide Aggregate

Introduction: To evaluate calcium ion release and pH of Sealer 26 (S26) (Dentsply, Rio de Janeiro, RJ, Brazil), white mineral trioxide aggregate (MTA), Endo CPM Sealer (CPM1) (EGEO SRL Bajo licencia MTM Argentina SA, Buenos Aires, Argentina), Endo CPM Sealer in a thicker consistency (CPM 2), and zinc oxide and eugenol cement (ZOE). Methods: Material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 3, 6,12,24, and 48 hours and 7,14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. An empty tube was used as the control group. Results: The control group presented a pH value of 6.9 at all studied periods and did not show the presence of calcium ion. S26 presented greater hydroxyl ion release up to 12 hours (p < 0.05). From 24 hours until 28 days, S26, MTA, CPM1, and CPM2 had similar results. in ail periods, ZOE presented the lowest hydroxyl ion release. CPM1, followed by CPM2, released the most calcium ions until 24 hours (p < 0.05). Between 48 hours and 7 days, CPM1 and CPM2 had the highest release. A greater calcium ion release was observed for CPM2, followed by CPM1 at 14 days and for S26, CPM1, and CPM2 at 28 days. ZOE released the least calcium ions in all periods. Conclusion: Sealer 26, MTA, and Endo CPM sealer at normal or thicker consistency release hydroxyl and calcium ions. Endo CPM sealer may be an alternative as root-end filling material. (J Endod 2009;35:1418-1421)

Temperature Changes in Gutta-Percha and Resilon Cones Induced by a Thermomechanical Compaction Technique

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clinical microscopic analysis of protaper retreatment system efficacy considering root canal thirds using three endodontic sealers

To evaluate the efficacy of ProTaper Universal rotary retreatment system and the influence of sealer type on the presence of filling debris in the reinstrumented canals viewed in an operative clinical microscope. Forty-five palatal root canals of first molars were filled with gutta-percha and one of the following sealers: G1, EndoFill; G2, AH Plus; G3, Sealapex. The canals were then reinstrumented with ProTaper Universal rotary system. Roots were longitudinally sectioned and examined under an operative clinical microscope (10x), and the amount of filling debris on canal walls was analyzed using the AutoCAD 2004 software. A single operator used a specific software tool to outline the canal area and the filling debris area in each third (cervical, middle, and apical), as well as the total canal area. Data were analyzed by Kruskal-Wallis test and Tukey test at P < 0.05. Sealapex demonstrated significant differences in the average of filling debris area/canal among the 3 thirds. This group revealed that apical third showed more debris than the both cervical and middle third (P < 0.0001). Endofill presented significantly more filling debris than Sealapex in the cervical third (P < 0.05). In the middle (P = 0.12) and apical third (P = 0.10), there were no differences amongst groups. Debris was left in all canal thirds, regardless of the retreatment technique. The greatest differences between techniques and sealers were found in the cervical third. Microsc. Res. Tech. 75:12331236, 2012. (C) 2012 Wiley Periodicals, Inc.

Solarização em microcosmo: efeito de materiais vegetais na sobrevivência de fitopatógenos de solo e na produção de voláteis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da simulação da solarização do solo com materiais vegetais sobre o crescimento micelial de fungos fitopatogênicos habitantes do solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Steroidal Anti-Inflammatory Drugs on Viability and Fertility of Equine Semen

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Uso de bioestimulante na videira 'Niagara Rosada'

O experimento foi realizado no período de agosto a dezembro de 2004, em vinhedo de 'Niagara Rosada' localizado em Pratânea-SP. O objetivo foi avaliar o efeito de bioestimulante nas características morfológicas e físico-químicas dos cachos de uva 'Niagara Rosada'. Os tratamentos consistiram na pulverização dos cachos com o bioestimulante nas doses de 0, 5, 10, 15 e 20 mg L-1, 25 dias após o pleno florescimento. O delineamento estatístico utilizado foi em blocos ao acaso com cinco repetições, e parcelas constituídas por 3 cachos. Analisou-se a massa fresca, comprimento e largura dos cachos e bagos, massa fresca do engaço, número de bagos por cacho, diâmetro do pedicelo, teor de sólidos solúveis totais, acidez titulável e o pH. Concluiu-se que o bioestimulante promoveu aumento linear no comprimento do cacho, aumento quadrático no diâmetro do pedicelo e um decréscimo linear no teor de sólidos solúveis totais.

Soil profile, relief features and their relation to structure and distribution of Brazilian Atlantic rain forest trees

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribuição e abundância de espécies arbóreas em cerradões no Pantanal, Estado do Mato Grosso do Sul, Brasil

Os cerradões no Pantanal ocorrem em áreas não inundáveis da planície e são importantes para a economia regional. Das áreas de cerradão são retiradas madeiras para construção de cercas, currais e galpões. Apesar da grande importância dos recursos vegetais do cerradão, existem poucas informações para embasar sua conservação e uso sustentável. Este trabalho teve como objetivos estudar a abundância, a distribuição das espécies arbóreas e correlações com a fertilidade do solo em áreas de cerradão (savana florestada) do Pantanal Sul Mato-grossense. Foram estudadas seis áreas de cerradão na sub-região da Nhecolândia, por meio de 30 pontos quadrantes, totalizando 120 árvores amostradas, com circunferência a altura do peito (CAP) > 15 cm, em cada área. As comparações florísticas, de abundância das espécies e de fertilidade do solo, foram efetuadas por análises de componentes principais (PCA). As áreas mostraram-se heterogêneas, apresentando diferentes níveis de fertilidade do solo, estrutura e composição da vegetação. Dois cerradões foram agrupados em termos de fertilidade do solo e de estrutura da vegetação, apresentando muitas árvores de Qualea grandiflora Mart., espécie que ocorreu associada a solos com maiores teores de fósforo. Outros dois cerradões apresentaram composição florística mais semelhante que os demais, apesar de ocorrerem em solos com diferentes níveis de fertilidade, indicando perturbação antrópica.

Composição florística e estrutura da comunidade arbórea na transição da Floresta Ombrófila Densa das Terras Baixas - Floresta Ombrófila Densa Submontana do Núcleo Picinguaba/PESM, Ubatuba, sudeste do Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)