Evaluation of standard reagents for radial-immunodiffusion assays. In vitro control of rabies vaccines

The RID assay is one of the in vitro methods used for in-process control in the production of rabies vaccines for veterinary use. It has been shown to be very useful for determining antigen concentration in the final bulk product. The work presented in this paper, including the production and standardization of candidate standard reagents for use in the Radial Immunodiffusion Assay (RID) was carried out at the Pan American Institute for Food Protection and Zoonoses (INPPAZ/PAHO/WHO). The study was completed with the cooperation of the Faculty of Veterinary Sciences, National University of La Plata (NULP), Argentina, where the validation of the proposed standards and the quality control of samples from 28 different batches of rabies vaccines produced with Pasteur strain rabies virus (PV) in BHK cells were performed. The activity of the vaccines was determined by in vivo (NIH) and in vitro (RID)assays. The results of the candidate reagents for the reagent standardization tests showed stability, sensitivity and reproducibility. The Relative Potency the 1.2 between the problem vaccines and the reference vaccine was estimated by variance and regression analysis. The results of our validation study show that the INPPAZ (PAHO/WHO) is capable of producing and distributing the above-mentioned standard reagents, as well as of providing support for the incorporation of the RID technique (sensitive, rapid and inexpensive) to the laboratories that manufacture rabies vaccines in Latin America and the Caribbean.

Aplicação de variadores de velocidade em sistemas de climatização

Por um lado vivemos numa sociedade cujos padrões de conforto são cada vez mais exigentes, por outro encontramo-nos numa era pautada por um certo declínio económico, social e também ambiental. Não se assumindo uma estratégia que limite ou diminua essas condições de conforto resta-nos atuar de forma a que os recursos utilizados para garantir esse mesmo conforto sejam utilizados da melhor forma possível. O setor dos edifícios é responsável por uma grande parcela de consumo de energia na sociedade atual, sendo que os sistemas de climatização que dele fazem parte, apresentam.se na maioria dos casos como os grandes consumidores de energia. Nesse sentido têm sido feitos esforços enormes no sentido de encontrar soluções que garantam a eficiência energética destes sistemas. O Variador Eletrónico de Velocidade apresenta-se como uma das soluções amplamente difundidas, na vertente do controle de processos e economia de energia. A sua aplicação em sistema de climatização é mais um desses casos. Nesse sentido, numa primeira parte é feito o estudo das características e funcionamento dos Variadores de Velocidade, Sistemas de Climatização e sua aplicação conjunta. Em seguida é realizada uma aplicação informática que pretende demonstrar a economia de energia garantida por aplicação de um Variador de Velocidade.

Identification of risk factors for death from tetanus in Pernambuco, Brazil: a case-control study

A case-control study was conducted to identify risk factors for death from tetanus in the State of Pernambuco, Brazil. Information was obtained from medical records of 152 cases and 152 controls, admitted to the tetanus unit in the State University Hospital, in Recife, from 1990 to 1995. Variables were grouped in three different sets. Crude and adjusted odds ratios, p-values and 95% confidence intervals were estimated. Variables selected in the multivariate analysis in each set were controlled for the effect of those selected in the others. All factors related to the disease progression - incubation period, time elapsed between the occurrence of the first tetanus symptom and admission, and period of onset - showed a statistically significant association with death from tetanus. Similarly, signs and/or symptoms occurring on admission or in the following 24 hours (second set): reflex spasms, neck stiffness, respiratory signs/symptoms and respiratory failure requiring artificial ventilation (third set) were associated with death from tetanus even when adjusted for the effect of the others.

Design of New Materials for Passive Vibration Control

The aim of this contribution is to extend the techniques of composite materials design to non-linear material behaviour and apply it for design of new materials for passive vibration control. As a first step a computational tool allowing determination of macroscopic optimized one-dimensional isolator behaviour was developed. Voigt, Maxwell, standard and more complex material models can be implemented. Objective function considers minimization of the initial reaction and/or displacement peak as well as minimization of the steady-state amplitude of reaction and/or displacement. The complex stiffness approach is used to formulate the governing equations in an efficient way. Material stiffness parameters are assumed as non-linear functions of the displacement. The numerical solution is performed in the complex space. The steady-state solution in the complex space is obtained by an iterative process based on the shooting method which imposes the conditions of periodicity with respect to the known value of the period. Extension of the shooting method to the complex space is presented and verified. Non-linear behaviour of material parameters is then optimized by generic probabilistic meta-algorithm, simulated annealing. Dependence of the global optimum on several combinations of leading parameters of the simulated annealing procedure, like neighbourhood definition and annealing schedule, is also studied and analyzed. Procedure is programmed in MATLAB environment.

A retrospective evaluation of a score system adopted by the Ministry of Health, Brazil in the diagnosis of pulmonary tuberculosis in childhood: a case control study

Based on a retrospective case-control study we evaluated the score system adopted by the Ministry of Health of Brazil (Ministério da Saúde - MS), to diagnose pulmonary tuberculosis (PTB) in childhood. This system is independent of bacteriological or histopathological data to define a very likely (> or = 40 points), possible (30-35 points) or unlikely (< or = 25 points) diagnosis of tuberculosis. Records of hospitalized non-infected HIV children at the Instituto de Puericultura e Pediatria Martagão Gesteira of Federal University of Rio de Janeiro (IPPMG-UFRJ), were reviewed. Patients were adjusted for age and divided in two different groups: 45 subjects in the case group (culture-positive) [mean of age = 10.64 mo; SD 9.66]; and 96 in the control group (culture-negative and clinic criteria that dismissed the disease) [mean of age = 11.79 mo.; SD 11.31]. Among the variables analyzed, the radiological status had the greater impact into the diagnosis (OR = 25.39), followed by exposure to adult with tuberculosis (OR = 10.67), tuberculin skin test >10mm (OR = 8.23). The best cut-off point to the diagnosis of PTB was 30 points, where the score system was more accurate, with sensitivity of 88.9% and specificity of 86.5%.

A Green Approach for Selfish Misbehavior Detection in 802.11-Based Wireless Networks

IEEE 802.11 is one of the most well-established and widely used standard for wireless LAN. Its Medium Access control (MAC) layer assumes that the devices adhere to the standard’s rules and timers to assure fair access and sharing of the medium. However, wireless cards driver flexibility and configurability make it possible for selfish misbehaving nodes to take advantages over the other well-behaving nodes. The existence of selfish nodes degrades the QoS for the other devices in the network and may increase their energy consumption. In this paper we propose a green solution for selfish misbehavior detection in IEEE 802.11-based wireless networks. The proposed scheme works in two phases: Global phase which detects whether the network contains selfish nodes or not, and Local phase which identifies which node or nodes within the network are selfish. Usually, the network must be frequently examined for selfish nodes during its operation since any node may act selfishly. Our solution is green in the sense that it saves the network resources as it avoids wasting the nodes energy by examining all the individual nodes of being selfish when it is not necessary. The proposed detection algorithm is evaluated using extensive OPNET simulations. The results show that the Global network metric clearly indicates the existence of a selfish node while the Local nodes metric successfully identified the selfish node(s). We also provide mathematical analysis for the selfish misbehaving and derived formulas for the successful channel access probability.

Epidemiologia e Saúde Públi

RESUMO - Visa-se explicitar a origem, a razão de ser, a natureza e o que se perspectiva da relação entre a Epidemiologia e a Saúde Pública, através de uma leitura histórica. As duas entidades foram-se definindo e fazendo sentido em conjunto, com sucessos e, também, muita polémica, desde há milénios e até meados do século XIX. Nesta época, uma combinação de circunstâncias proporcionou-lhes uma explosão de crescimento e de definição, de par com várias outras áreas disciplinares. Desde o antigo relato bíblico de como boa alimentação explica o bom estado de saúde, até à valorização científica das condicionantes sociais e económicas da saúde por Marmot e Rose, passando por «miasmas» causando doença e pela deslocação do conceito de risco individual de saúde para o de risco populacional — com as implicações inerentes a essa importante inovação —, este percurso permite identificar as fundações de tão notável simbiose, explicar o estado presente, vê-la evoluir e achar nela o significado do património hoje disponível, e o que ele promete. Algumas discrepâncias quanto à designação dos seus métodos, bem como a contínua discussão quanto à sua verdadeira natureza e orientação futura, atestam a juventude da Epidemiologia como disciplina científica. Entretanto, a Saúde Pública esforça-se por manter a sua essência integradora, à medida que outras disciplinas contribuem mais para que concretize os seus objectivos; é desafiada pela exposição das populações, em larga escala, a factores de doença, por vezes de intensidade mínima, e pelo surgimento de novas doenças ou a ampliação do volume de outras na população, muitas vezes não respeitando fronteiras. A história dessa simbiose mostra bem que conhecer o modo como uma doença se origina permite controlá-la na população, ou mesmo evitá-la, e que é grande o número de problemas que, em sinergia, as duas disciplinas podem clarificar e resolver. Assim, a Epidemiologia oferece à Saúde Pública explicações (olhos, inteligência e linguagem) para os problemas de saúde das populações — o que permite à segunda saber sobre o quê agir —, cenários de possível evolução dos problemas — o que permite aos decisores optarem em função de diferentes pressupostos, sobre como agir — e capacidade de juízo sobre os resultados das acções empreendidas, em simultâneo com a elevação do nível de consciência, de compreensão e de intervenção quanto ao que se está a passar, tanto pelos profissionais, como pela população — transferência do conhecimento. Facilmente se antecipa que a relação entre as duas disciplinas irá evoluir para maior complexidade e, também, solicitação e exigência da Saúde Pública sobre a Epidemiologia, que terá que corresponder em utilidade. E esta, continuando a subespecializar-se e a sofisticar-se tanto nos métodos, como nos enfoques sobre categorias específicas de factores, precisará de progredir muito na gestão da sua consistência enquanto corpo de conhecimento integrado e com peculiaridades metodológicas, à semelhança da Saúde Pública.O modo como evoluirá a relação entre ambas depende ainda da evolução dos próprios problemas, conceitos, teorias e soluções relacionados com a saúde das populações, e ainda do desenvolvimento das demais disciplinas chamadas à integração por ambas, para enfrentarem esses desafios. Nomeadamente, a Epidemiologia terá que gerir com perícia dificuldades já identificadas, como: incorporar métodos qualitativos de investigação na sua fortíssima tradição e cultura quantitativa; operacionalizar satisfatoriamente o conceito de «risco atribuível na população», ao serviço da definição de prioridades de acção dirigida às necessidades de saúde; aperfeiçoar modelos de interpretação causal que respeitem a multicausalidade; aproveitar as técnicas estatísticas de análise multivariada, sem se perder na abstracção dos seus modelos; desenvolver a investigação nas dimensões positivas de saúde, além da doença, para contribuir melhor para a realização da Saúde Pública, sua principal cliente e fornecedora de oportunidades.--------------------------ABSTRACT - The aim of the author is to explicit the origin, the rationale, the nature and the prospects of the relationship between Epidemiology and Public health, through an historic approach. The two entities have been defining and making sense together, by achieving successes, but also with much controversy, since millennia ago, until mid XIX century. A combination of circumstances provided them the opportunity for an explosion of growth and definition, then, alongside several other disciplines. From the ancient biblical report on how good food explains good health, up to the scientific appreciation of both social and economical constraints to health by Marmot and Rose, passing through «miasma» causing disease and through displacing from individual health risk to population risk — with the inherent implications of that important innovation —, this route allows the identification of the foundations of such remarkable symbiosis, the explanation of current status, to see its evolution and find in it the meaning of today’s heritage and what it promises. Some discrepancies on the name of its methods, as well as the continuing discussion about its true nature and future orientation, attest Epidemiology’s youth as a scientific discipline. Meanwhile, Public Health strives to keep its integrating essence, while other disciplines increasingly contribute so that it achieves its objectives; it is challenged by large scale population exposure to disease factors, sometimes with a minimum intensity, and by new diseases emerging in the population or by old ones getting amplified, often not respecting regions boundaries. The history of such a symbiosis shows that knowing the way a disease is generated allows to control it in the population, or even to avoid it, and that the number of problems that the two disciplines are able to clarify and solve together in synergy is considerable. Therefore, Epidemiology offers Public Health explanations (eyes, intelligence and language) for populations’s health problems — allowing that the latter knows on what to act —, scenarios on how problems may tend to evolve — allowing decision-makers to make their choices as a function of different assumptions, on how to act — and judgement capabilities on the results of already undertaken actions, accompanied by the raising of conscience level, understanding and intervention of what is going on by both professionals and the population – knowledge transfer. It is easy to anticipate that the relationship between both disciplines will develop towards increasing complexity and demand from Public Health to Epidemiology, and that this one will have to correspond in usefulness. And the latter, while continuing its subspecialisation and sophistication either in its methods, or in its approaches to specific factor categories, will need to progress in managing its consistency as an integrated body of knowledge having methodological peculiarities, similarly to Public Health. Further, the way the relationship between both will evolve depends on the evolution of the problems themselves, of the concepts, theories and solutions related to the health of populations, and on the development of remaining disciplines called to integration by both, in other to face those problems. Namely, Epidemiology will have to manage with expertise some already known difficulties, as: the inclusion of qualitative research methods in its very strong quantitative tradition and culture; to grant satisfactory operation to the «population attributable risk» concept, in support to the definition of action priorities envisaging health needs; to improve causal interpretation models that comply with multicausality; to take advantage of multivariate statistical techniques, without get

Detection of cardiac biomarker proteins using a disposable based on a molecularly imprinted polymer grafted onto graphite

A low-cost disposable was developed for rapid detection of the protein biomarker myoglobin (Myo) as a model analyte. A screen printed electrode was modified with a molecularly imprinted material grafted on a graphite support and incorporated in a matrix composed of poly(vinyl chloride) and the plasticizer o-nitrophenyloctyl ether. The protein-imprinted material (PIM) was produced by growing a reticulated polymer around a protein template. This is followed by radical polymerization of 4-styrenesulfonic acid, 2-aminoethyl methacrylate hydrochloride, and ethylene glycol dimethacrylate. The polymeric layer was then covalently bound to the graphitic support, and Myo was added during the imprinting stage to act as a template. Non-imprinted control materials (CM) were also prepared by omitting the Myo template. Morphological and structural analysis of PIM and CM by FTIR, Raman, and SEM/EDC microscopies confirmed the modification of the graphite support. The analytical performance of the SPE was assessed by square wave voltammetry. The average limit of detection is 0.79 μg of Myo per mL, and the slope is −0.193 ± 0.006 μA per decade. The SPE-CM cannot detect such low levels of Myo but gives a linear response at above 7.2 μg · mL−1, with a slope of −0.719 ± 0.02 μA per decade. Interference studies with hemoglobin, bovine serum albumin, creatinine, and sodium chloride demonstrated good selectivity for Myo. The method was successfully applied to the determination of Myo urine and is conceived to be a promising tool for screening Myo in point-of-care patients with ischemia.

Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

An Extension of Estimation of Domain of Attraction for Fractional Order Linear System Subject to Saturation Control

This paper employs the Lyapunov direct method for the stability analysis of fractional order linear systems subject to input saturation. A new stability condition based on saturation function is adopted for estimating the domain of attraction via ellipsoid approach. To further improve this estimation, the auxiliary feedback is also supported by the concept of stability region. The advantages of the proposed method are twofold: (1) it is straightforward to handle the problem both in analysis and design because of using Lyapunov method, (2) the estimation leads to less conservative results. A numerical example illustrates the feasibility of the proposed method.