Long-term transcutaneous monitoring of oxygen tension and carbon dioxide at 42 degrees C in critically ill neonates: improved performance of the tcpo2 monitor with topical metabolic inhibition.

Whereas during the last few years handling of the transcutaneous PO2 (tcPO2) and PCO2 (tcPCO2) sensor has been simplified, the high electrode temperature and the short application time remain major drawbacks. In order to determine whether the application of a topical metabolic inhibitor allows reliable measurement at a sensor temperature of 42 degrees C for a period of up to 12 h, we performed a prospective, open, nonrandomized study in a sequential sample of 20 critically ill neonates. A total of 120 comparisons (six repeated measurements per patient) between arterial and transcutaneous values were obtained. Transcutaneous values were measured with a control sensor at 44 degrees C (conventional contact medium, average application time 3 h) and a test sensor at 42 degrees C (Eugenol solution, average application time 8 h). Comparison of tcPO2 and PaO2 at 42 degrees C (Eugenol solution) showed a mean difference of +0.16 kPa (range +1.60 to -2.00 kPa), limits of agreement +1.88 and -1.56 kPa. Comparison of tcPO2 and PaO2 at 44 degrees C (control sensor) revealed a mean difference of +0.02 kPa (range +2.60 to -1.90 kPa), limits of agreement +2.12 and -2.08 kPa. Comparison of tcPCO2 and PaCO2 at 42 degrees C (Eugenol solution) showed a mean difference of +0.91 (range +2.30 to +0.10 kPa), limits of agreement +2.24 and -0.42 kPa. Comparison of tcPCO2 and PaCO2 at 44 degrees C (control sensor) revealed a mean difference of +0.63 kPa (range 1.50 to -0.30 kPa), limits of agreement +1.73 and -0.47 kPa. CONCLUSION: Our results show that the use of an Eugenol solution allows reliable measurement of tcPO2 at a heating temperature of 42 degrees C; the application time can be prolongued up to a maximum of 12 h without aggravating the skin lesions. The performance of the tcPCO2 monitor was slightly worse at 42 degrees C than at 44 degrees C suggesting that for the Eugenol solution the metabolic offset should be corrected.

Carbon isotopic ratio analysis by gas chromatography/combustion/isotope ratio mass spectrometry for the detection of gamma-hydroxybutyric acid (GHB) administration to humans.

Since GHB (gamma-hydroxybutyric acid) is naturally produced in the human body, clinical and forensic toxicologists must be able to discriminate between endogenous levels and a concentration resulting from exposure. To suggest an alternative to the use of interpretative concentration cut-offs, the detection of exogenous GHB in urine specimens was investigated by means of gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). GHB was isolated from urinary matrix by successive purification on Oasis MCX and Bond Elute SAX solid-phase extraction (SPE) cartridges prior to high-performance liquid chromatography (HPLC) fractioning using an Atlantis dC18 column eluted with a mixture of formic acid and methanol. Subsequent intramolecular esterification of GHB leading to the formation of gamma-butyrolactone (GBL) was carried out to avoid introduction of additional carbon atoms for carbon isotopic ratio analysis. A precision of 0.3 per thousand was determined using this IRMS method for samples at GHB concentrations of 10 mg/L. The (13)C/(12)C ratios of GHB in samples of subjects exposed to the drug ranged from -32.1 to -42.1 per thousand, whereas the results obtained for samples containing GHB of endogenous origin at concentration levels less than 10 mg/L were in the range -23.5 to -27.0 per thousand. Therefore, these preliminary results show that a possible discrimination between endogenous and exogenous GHB can be made using carbon isotopic ratio analyses.

Coating carbon nanotubes with a polystyrene-based polymer protects against pulmonary toxicity.

BACKGROUND: carbon nanotubes (CNT) can have adverse effects on health. Therefore, minimizing the risk associated with CNT exposure is of crucial importance. The aim of this work was to evaluate if coating multi-walled CNT (MWCNT) with polymers could modify their toxicity, thus representing a useful strategy to decrease adverse health effects of CNT. We used industrially-produced MWCNT uncoated (NT1) or coated (50/50 wt%) with acid-based (NT2) or polystyrene-based (NT3) polymer, and exposed murine macrophages (RAW 264.7 cell line) or Balb/c mice by intratracheal administration. Biological experiments were performed both in vitro and in vivo, examining time- and dose-dependent effects of CNT, in terms of cytotoxicity, expression of genes and proteins related to oxidative stress, inflammation and tissue remodeling, cell and lung tissue morphology (optical and transmission electron microscopy), and bronchoalveolar lavage fluid content analysis.RESULTS: extensive physico-chemical characterization of MWCNT was performed, and showed, although similar dimensions for the 3 MWCNT, a much smaller specific surface area for NT2 and NT3 as compared to NT1 (54.1, 34 and 227.54 m(2)/g respectively), along with different surface characteristics. MWCNT-induced cytotoxicity, oxidative stress, and inflammation were increased by acid-based and decreased by polystyrene-based polymer coating both in vitro in murine macrophages and in vivo in lung of mice monitored for 6 months.CONCLUSIONS: these results demonstrate that coating CNT with polymers, without affecting their intrinsic structure, may constitute a useful strategy for decreasing CNT toxicity, and may hold promise for improving occupational safety and that of general the user.

Preventing food poisoning in hospital and at home

Information for patients and visitors on preventing food poisoning.

Carbon isotope excursions and microfacies changes in marine Permian-Triassic boundary sections in Hungary

Several Permian-Triassic boundary sections occur in various structural units within Hungary. These sections represent different facies zones of the western Palaeotethys margin. The Gardony core in the NE part of the Transdanubian Range typically represents the inner ramp, while the Balvany section in the Bukk Mountains of northern Hungary represents an outer ramp setting. The two sections have different patterns for their delta(13)C values. The Balvany section shows a continuous change towards more negative delta(13)C values starting at the first biotic decline, followed by a sharp, quasi-symmetric negative peak at the second decline. The appearance of the delta(13)C peak has no relationship to the lithology and occurs within a shale with low overall carbonate content, indicating that the peak is not related to diagenesis or other secondary influences. Instead, the shift and the peak reflect primary processes related to changes in environmental conditions. The continuous shift in delta(13)C values is most probably related to a decrease in bioproductivity, whereas the sharp peak can be attributed to an addition of C strongly depleted in (13)C to the ocean-atmosphere system. The most plausible model is a massive release of methane-hydrate. The quasi-symmetric pattern suggests a rapid warming-cooling cycle or physical unroofing of sediments through slope-failure and releasing methane-hydrate. The Gidony-1 core shows a continuous negative delta(13)C shift starting below the P-T boundary. However, the detailed analyses revealed a sharp delta(13)C peak in the boundary interval, just below the major biotic decline, although its magnitude doesn't reach that observed in the Balvany section. Based on careful textural examination and high-resolution stable isotope microanalyses we suggest that the suppression of the delta(13)C peak that is common in the oolitic boundary sections is due to combined effects of condensed sedimentation, sediment reworking and erosion, as well as perhaps diagenesis. (c) 2005 Elsevier B.V All rights reserved.

Investigations on carbon isotope ratios and concentrations of urinary formestane.

The aromatase inhibitor formestane (4-hydroxy-androst-4-ene-3,17-dione, F) is prohibited in sports by the World Anti-Doping Agency (WADA). F possesses only weak androgenic properties and is presumed to be employed in order to suppress estrogen production during the illicit intake of anabolic steroids by athletes. Former studies additionally showed that F is an endogenous steroid produced in low amounts. According to the regulations of WADA, urinary concentrations above 100 ng/ml are assumed to be due to ingestion of F. To distinguish between endogenous or exogenous sources of urinary F, isotope ratio mass spectrometry (IRMS) is the method of choice. Therefore, a method to determine the carbon isotope ratio (CIR) of F in urine samples was developed and validated. Routine samples (n = 42) showing concentrations of F above 5 ng/ml were investigated and enabled elucidation of the CIR of endogenous F and subsequent the calculation of a reference limit. A reference population encompassing n = 90 males and females was investigated regarding endogenous concentrations of F. An excretion study with one male volunteer was conducted to test and validate the developed method and to identify possible impact of F administration on other endogenous steroids. By CIR determination of F it is clearly possible to elucidate its endogenous or exogenous source. Taking into account the CIR of other target analytes like testosterone, a differentiation between F and androstenedione intake is possible. In 2011, the first exogenous F below the WADA threshold could be detected by means of the developed IRMS method.

Reliability of stable carbon and oxygen isotope compositions of pedogenic needle fibre calcite as environmental indicators: examples from Western Europe.

Stable carbon and oxygen isotope analyses were conducted on pedogenic needle fibre calcite (NFC) from seven sites in areas with roughly similar temperate climates in Western Europe, including the Swiss Jura Mountains, eastern and southern France, northern Wales, and north-eastern Spain. The δ(13)C values (-12.5 to-6.8 0/00 Vienna Pee Dee Belemnite (VPDB)) record the predominant C(3) vegetation cover at the sites. A good correlation was found between mean monthly climatic parameters (air temperature, number of frost days, humidity, and precipitation) and δ(18)O values (-7.8 to-3.40/00 VPDB) of all the NFC. Similar seasonal variations of δ(18)O values for monthly NFC samples from the Swiss sites and those of mean monthly δ(18)O values of local precipitation and meteorological data point out precipitation and preferential growth/or recrystallisation of the pedogenic needle calcite during dry seasons. These covariations indicate the potential of stable isotope compositions of preserved NFC in fossil soil horizons as a promising tool for palaeoenvironmental reconstructions.

Carbon dioxide baited trap catches do not correlate with human landing collections of Anopheles aquasalis in Suriname

Three types of carbon dioxide-baited traps, i.e., the Centers for Disease Control Miniature Light Trap without light, the BioGents (BG) Sentinel Mosquito Trap (BG-Sentinel) and the Mosquito Magnet® Liberty Plus were compared with human landing collections in their efficiency in collecting Anopheles (Nyssorhynchus) aquasalis mosquitoes. Of 13,549 total mosquitoes collected, 1,019 (7.52%) were An. aquasalis. Large numbers of Culex spp were also collected, in particular with the (BG-Sentinel). The majority of An. aquasalis (83.8%) were collected by the human landing collection (HLC). None of the trap catches correlated with HLC in the number of An. aquasalis captured over time. The high efficiency of the HLC method indicates that this malaria vector was anthropophilic at this site, especially as carbon dioxide was insufficiently attractive as stand-alone bait. Traps using carbon dioxide in combination with human odorants may provide better results.

Middle and Late Jurassic carbon stable-isotope stratigraphy and radiolarite sedimentation of the Umbria-Marche basin (Central Italy)

A continuous carbon isotope curve from Middle-Upper Jurassic pelagic carbonate rocks was acquired from two sections in the southern part of the Umbria-Marche Apennines in central Italy. At the Colle Bertone section (Terni) and the Terminilletto section (Rieti), the Upper Toarcian to Bajocian Calcari e Marne a Posidonia Formation and the Aalenian to Kimmeridgian Calcari e Marne a Posidonia and Calcari Diasprigni formations were sampled, respectively. Biostratigraphy in both sections is based on rich assemblages of calcareous nannofossils and radiolarians, as well as some ammonites found in the upper Toarcian-Bajocian interval. Both sections revealed a relative minimum of delta(13)C(PDB) close to + 2 parts per thousand in the Aalenian and a maximum around 3.5 parts per thousand in early Bajocian, associated with an increase in visible chert. In basinal sections in Umbria-Marche, this interval includes the very cherry base of the Calcari Diasprigni Formation (e.g. at Valdorbia) or the chert-rich uppermost portion of the Calcari a Posidonia (e.g at Bosso). In the Terminilletto section, the Bajocian-early Barthonian interval shows a gradual decrease in delta(13)C(PDB) values and a low around 2.3 parts per thousand. This part of the section is characterised by more than 40 m of almost chart-free limestones and correlates with a recurrence of limestone-rich facies in basinal sections at Valdorbia. A double peak with values of delta(13)C(PDB) around + 3 parts per thousand was observed in the Callovian and Oxfordian, constrained by well preserved radiolarian faunas. The maxima lie in the Callovian and the middle Oxfordian, and the minimum between the two peaks should be near the Callovian/Oxfordian boundary. In the Terminilletto section, visible chert increases together with delta(13)C(PDB) values from the middle Bathonian and reaches peak values in the Callovian-Oxfordian. In basinal sections in Umbria-Marche, a sharp increase in visible chert is observed at this level within the Calcari Diasprigni. A drop of delta(13)C values towards + 2 parts per thousand occurs in the Kimmeridgian and coincides with a decrease of visible chert in outcrop. The observed delta(13)C positive anomalies during the early Bajocian and the Callovian-Oxfordian may record changes in global climate towards warmer, more humid periods characterised by increased nutrient mobilisation and increased carbon burial. High biosiliceous (radiolarians, siliceous sponges) productivity and preservation appear to coincide with the delta(13)C positive anomalies, when the production of platform carbonates was subdued and ceased in many areas, with a drastic reduction of periplatform ooze input in many Tethyan basins. The carbon and silica cycles appear to be linked through global warming and increased continental weathering. Hydrothermal events related to extensive rifting and/or accelerated oceanic spreading may be the endogenic driving force that created a perturbation of the exogenic system (excess CO2 into the atmosphere and greenhouse conditions) reflected by the positive delta(13)C shifts and biosiliceous episodes.

ICOS Carbon Data Portal

La infraestructura europea ICOS (Integrated Carbon Observation System), tiene como misión proveer de mediciones de gases de efecto invernadero a largo plazo, lo que ha de permitir estudiar el estado actual y comportamiento futuro del ciclo global del carbono. En este contexto, geomati.co ha desarrollado un portal de búsqueda y descarga de datos que integra las mediciones realizadas en los ámbitos terrestre, marítimo y atmosférico, disciplinas que hasta ahora habían gestionado los datos de forma separada. El portal permite hacer búsquedas por múltiples ámbitos geográficos, por rango temporal, por texto libre o por un subconjunto de magnitudes, realizar vistas previas de los datos, y añadir los conjuntos de datos que se crean interesantes a un “carrito” de descargas. En el momento de realizar la descarga de una colección de datos, se le asignará un identificador universal que permitirá referenciarla en eventuales publicaciones, y repetir su descarga en el futuro (de modo que los experimentos publicados sean reproducibles). El portal se apoya en formatos abiertos de uso común en la comunidad científica, como el formato NetCDF para los datos, y en el perfil ISO de CSW, estándar de catalogación y búsqueda propio del ámbito geoespacial. El portal se ha desarrollado partiendo de componentes de software libre existentes, como Thredds Data Server, GeoNetwork Open Source y GeoExt, y su código y documentación quedarán publicados bajo una licencia libre para hacer posible su reutilización en otros proyecto

Constraints on the upper Permian to upper Triassic marine carbon isotope curve : case studies from the Tethys

Secular variations of the seawater carbon isotopic composition provide evidence for paleoceanographic and paleoclimatic changes and may serve for chemiostratigraphic correlations. The present study aimed to improve the current knowledge on the Upper Permian and Triassic segment of the Phanerozoic marine carbon isotope curve, whose Triassic part was poorly constrained by previous studies. Profiles of inorganic carbon isotopes are provided for sections from Himalaya (Salt Range, Kashmir, Spiti and Nepal), Oman and North Dobrogea (Romania) on the basis of whole-rock carbonate analysis. The data acquired, together with a literature compilation confirmed that most of the Upper Permian is characterized by high δ13C values (averaging +40/00) but failed to detect a positive excursion as suggested by recent compilations. In the light of these observations, the large drop in δ13C values associated with the end-Permian mass extinction appears to be driven by a sudden transfer of previously stocked 13C depleted carbon, rather than by the overturn of a Late Permian stratified ocean. The Triassic data-set outlines significant secular variations. The best documented is a carbon isotope positive excursion just across the Lower-Middle Triassic boundary, globally developed since it was detected in various paleogeographic settings. It is interpreted to reflect variations in surface ocean chemistry, possibly related to increased primary productivity, at times when the biotic recovery after the end-Permian mass-extinction began to accelerate significantly and when a sharp rise in seawater δ34S values occurred globally. Strontium isotope data obtained from well preserved biogenic phosphates allow a refinement of the Middle Triassic segment of the seawater strontium isotope curve and show a major inflexion point of the seawater strontium isotope curve also near the Lower Triassic - Middle Triassic boundary. These facts suggest that the transition from the Early to the Middle Triassic was a time of revolutionary global change which represented an important step in the evolution of Mesozoic marine environments. A tentative carbon isotope curve for the Upper Permian to Upper Triassic time interval is proposed. Its major features are: ? high but constant δ13C values during the Late Permian ? a sharp drop in δ13C values in the latest Permian ? subsequent recovery of δ13C values ? a short-lived positive excursion across the Early-Middle Triassic boundary ? a gradual rise in δ13C values starting in the Late Ladinian or in the Early Carnian It is foreseen that these fluctuations of the carbon isotope curve may serve as chronostratigraphic markers and further assist in the correlation of Permian and Triassic carbonate deposits.

Electrochemically promoted carbon-halide bond cleavage in 4-nitrobenzyl halides

This manuscript reports the study of the carbon-halide bond cleavage in 4-nitrobenzyl halides, taking special attention to the iodide and fluoride derivatives. The electrochemical reduction mechanism has been disclosed for both compounds by terms of cyclic voltammetry and controlled potential electrolysis. In the case of 4-nitrobenzyl iodide, a first one electron irreversible wave leads to the corresponding 4-nitrobenzyl radical and iodide. However, in the case of 4-nitrobenzyl fluoride, a first one-electron reversible wave appears at –1.02 vs. SCE followed by one electron irreversible wave. In this second electron transfer process, the cleavage of the C-F bond is taking place, so the bond cleavage reaction occurs at the dianion level. To disclose and understand the electrochemical reduction mechanisms that allows to obtain important thermodynamic and kinetic data that would help in the understanding of C-X bond cleavage. This type of bond dissociation reactions are involved in the metabolism pathways of the human body.