Estudo da adsorção de níquel (II) e zinco (II) em soluções aquosas por lama vermelha natural e ativada: influência do PH, isotermas, cinética e termodinâmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização histomorfológica de lesões granulomatosas sugestivas de tuberculose ganglionar e pulmonar em bovinos abatidos na região noroeste do estado de SãoPaulo

Tuberculosis infection among humans transmitted by products of animal origin can be caused by Mycobacterium bovis, a concern in developing countries, because the number of human cases is relatively high compared with countries that have implemented programs to eradicate bovine tuberculosis for many years. Because it is a chronic disease with subclinical evolution, it is transmitted to other animals in the herd livestock resulting in high loss losses resulting high (10 to 25%), as well as the zoonotic nature of the disease on public health. This work aimed to study the histomorphology of granulomas in samples of lymph nodes and lungs of animals with suggestive lesions of tuberculosis, as well as those similar to the sanitary inspection. The animals clinically healthy ante-mortem, were slaughtered in a slaughterhouse in the northwestern state of Sao Paulo between April 2008 and April 2009, considering that carcasses had lymph nodes with lesions typical of tuberculosis, exhibiting nodular and hemorrhagic appearance. The caseous or calcified lesions, purulent or not, of various sizes and shapes, were also evaluated. Of the 307,661 animals slaughtered in the mentioned period, 494 gross suggestive lesions of tuberculosis and from 29 cities in the state of Sao Paulo, 16 from Mato Grosso do Sul, Goias 15, one from Mato Grosso and Paraná. Among these, 200 samples (40,5%) were processed for histopathological evaluation by hematoxylin-eosin (HE) and 90 (45%) were subjected to Ziehl-Neelsen (ZN) and examined by light microscopy. In HE staining, histopathological changes of tuberculosis were found in 197 (98,5%), classified according to the stage of development adopted by Wango et al.(31), where 29 samples were included in stage I (14,5%), 53 in stage II (26,5%), 87 in stage III (43,5%), 28 in stage IV (14%). In the ZN staining Mycobacterium sp was found in 89 (99%) of the specimens. The rate of tuberculosis in the herd studied was 0,16%. We conclude that the identification of the disease in slaughterhouses and meat companies from significant gross lesions, enables the implementation of effective measures, specifically the origin of the disease in cattle herds, providing control measures to prevent its spread.

Compatibilidade entre alginato e gesso ortodônticos: capacidade de umedecimento sob influência da desinfecção do molde

The dental trade has offered dental impression and dental stone for orthodontic use ensuring accurate models. The compatibility between these materials is defined by the wetting of the model surfaces by the mixture water/stone poured over it and the influenced by the method of disinfection of model and disinfectant solution used. It was evaluated the influence of spray disinfection with sodium hypochlorite 1% on the wettability of two commercial alginate (Jeltrate ® - Dentsply and Orthoprint ® - Zhermack) at two commercial type III gypsum (Rio ® - ME and AOBussoli Orthogesso Orthogesso ®-SA). Twenty models were fabricated for each type of alginate, which were divided into two groups (water and sodium hypochlorite), receiving respectively water and sodium hypochlorite 1% spray. Each group of models was then further divided into two subgroups, and on their surface were poured 2 ml of type III gypsum (Gesso Rio® or Orthogesso®). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to ANOVA and founded statistical significance for solutions used. It was concluded that sodium hypochlorite spray improved wettability of alginates studied.

Efeitos de três modalidades de atividade física na capacidade funcional de idosos

The aim of this study was to analyze and compare the effects of three types of physical activity: general physical activity, dance and weight training, in functional capacity in elderly. The sample included 94 seniors with a mean age of 64.06 ± 7.38 years, who participated in PROFIT. For the evaluation we used the battery of test from AAHPERD, which checks the levels of flexibility, coordination, agility and dynamic balance, strength endurance and general endurance before and after four months of intervention. The results indicated a maintained in the levels of functional components. The participants general physical activity group had better results on the components: strength endurance, agility and dynamic balance. It can be concluded that the practice of regular physical activity and systematized, regardless of the type may have a positive influence on the functional performance of elderly and can preserve their independence and autonomy.

Modificação de eletrodos de carbono vítreo e nanotubos de Ti/TiO2 com aspirinato de cobre (II) para detecção eletroquímica e redução fotoeletrocatalítica de íons nitrito

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação in situ de metilmercúrio e mercúrio (II) em sistemas aquáticos nas proximidades de refinarias de petróleo, utilizando a técnica difusão em filmes finos por gradiente de concentração (DGT)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Capacidade digestiva durante a ontogenia de larvas de pacu Piaractus mesopotamicus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Concordância entre o débito cardíaco estimado através das técnicas de termodiluição transpulmonar e de análise de contorno de pulso e a técnica de termodiluição de artéria pulmonar em cães anestesiados com isoflurano

Pós-graduação em Anestesiologia - FMB

Início de ativação muscular de estabilizadores primários e a capacidade física para avaliar estabilização lombo-pélvica

Introduction: Due to the high incidence of low back pain without apparent cause, different approaches to evaluate the lumbar instability has been proposed, such as surface electromyography to determine pre-activation and the ability of lumbar stabilization through functional physical assessment. In this context, the objective of this study was to evaluate the early activation of the primary stabilizing muscles in subjects without low back pain, with different physical abilities function (CFF). Method: Study participants were 20 subjects with 19.8 ± 1.4 years, 55.7 ± 8.8 kilos, 1.66 ± 0.08 m, of both sexes. The subjects underwent six Tests Physical Function (TFF) and the Test of Fast Moving Flexion Arm (TMRFB) to capture the electromyographic activity of the lumbar multifidus muscles (LM) and internal oblique - lower fibers (HI). Were assigned weights for each functional test and the result of the physical capacity of the final functional subject ranged from 0 to 100%. In the analysis of TMRB was considered the onset time of activation between the ML and HI. Results: Regarding TFF 2 (10%) subjects were considered to have normal physical capacity, 6 (30%) with good physical ability and 12 (60%) with regular physical capacity or poor. As for TMRFB average values of initiation of muscle activation in 75% of subjects were within the limits to characterize the condition of pre-muscle activation. Conclusion:The results obtained in the TFF were low compared with the CFF of asymptomatic subjects evaluated. This fact does not mean that the condition of stabilization of the subject is appropriate. However, the results obtained in the electromyographic examination to suggest that 25% of asymptomatic subjects tested did not have a proper condition of lumbar stabilization.

Capacidade de força dos membros superiores em competidores de montaria em touros

This study did evaluate the handgrip strength capacity of bull riding practitioners and recreational practitioners in order to obtain parameters of the muscular fitness of subjects undertaken this sports practice. Twenty right-handed subjects were grouped into bull riding athletes (10 individuals at AMT: 174.5 ± 5.2 cm of height, 78.9 ± 12 kg of body weight, 24.7 ± 6.1 years, and 13,8 ± 2.4% for body fat) and non-athletes (10 subjects n-AMR: 178.5 ± 7.3 cm of height, 81.2 ± 8.8kg of body weight, 21.7 ± 2.3 years, and 13.8 ± 1.9% of body fat). They were underwent to protocols of handgrip strength evaluation by a standard and specific dynamometry (simulating a bull riding posture) of right (DPD e DED) e left (DEP e DEE) hands. The dynamic force values from one repetition to maximum test (1RM) were either obtained in conventional load-based system for upper limbs exercises. The values were compared by the test-t for independent data, assuming ρ ≤ 0.05. The relationship between the values of strength from handgrip and dynamic exercises were drawn by Pearson correlation. The results of the AMT to DPD (43.8 ± 6.8kgf), DPE (39.4 ± 7.7kgf), DED (44.9 ± 5.6kgf), and DEE (39.8 ± 8.3kgf). For the n-AMT in DPD (47.0 ± 3.0kgf), DPE (42.2 ± 6.1kgf), DED (49.2 ± 1.5kgf), and DEE (46.2 ± 4.1kgf). Significant difference was observed between DED and DEE. The strength tests of 1RM at bench press (73.2 ± 12.0kg and 82.0 ± 12.0kg), arm-curl (45.2 ± 8.9kg and 43.8 ± 8.9kg), triceps pulley (67.0 ± 6.3kg and 72.0 ± 6.3kg), and pulley (73.5 ± 8.5kg and 73.7 ± 7.5kg) for groups n-AMT and AMT did not showed differences. Correlations were showed between all handgrip tests and elbow flexor force for AMT, and between DPD and elbow extensor, abductor, adductor and extensor of shoulder for n-AMT. influences to the performance of the force dynamometry. It could be concluded that handgrip force and dynamic strength of upper limbs did not were putative responses for bull riding practice.

Difusão de tecnologia CAD e CNC como ferramenta básica de criação e produção em pequena escala, acessível à comunidade

The high competitiveness and the search for newtechnologies that differentiate the product from the project,require the use of new digital tools. The computer aideddesign - Computed Aided Design (CAD), with electronicmodeling, simulation, structural analysis and production,performed in a virtual environment through the applicationof specific software, are available but their use is stilllimited. There are various software available in languagesand extensions to industrial production which, from 3Dmodeling, they can manage through Computer NumericalControl - Computed Numerical Control (CNC) machiningcenters, laminating, stamping, mold making and otherprocesses productive. This project aims to encouragecreativity and entrepreneurship in the community throughthe provision of technology computer aided design - CAD,with a view to implementation of machining technology.

Uso da cromatografia gasosa para avaliação da difusão em membrana de Polietileno de Alta Densidade (pead) em contato com hidrocarboneto

The constant petrol fuel leak in gas stations has caused concern in many countries around the world. Those fuels have toxic organic compounds in their composition, like Polycyclic Aromatic Hydrocarbons (PAH), which are harmful to the human health. In this work the efficiency of the protection layer with a High Density Polyethylene (HDPE) membrane of 2.5 mm thickness was evaluated. The study was based in the diffusive process in the intact membrane by a permeameter developed to evaluate the diffusive process. The membrane was putted in the middle of the system to separate two sides: a local soil impregnated with diesel oil (in one side) and pure water (in the other side). The chromatography technique was conducted to evaluate the contamination in the pure water. The analyses were made monthly in a total period of 6 months of research. The results tests show that the membrane was less effective to antracene and naphthalene compounds. Despite that, the results showed that the HDPE membrane is a good alternative to prevent contamination of water and soil by the compounds under study up to one year, based on the performance in the time of study.

Dilemas da produção de conhecimento no campo acadêmico: entre especialização e difusão

The paper explores some issues related to the production of knowledge in the academic fi eld, relating it to the problem of knowledge dissemination beyond this restricted universe. Taking on theoretical sources from Bourdieu’s fi eld concept and his studies concerning the university fi eld in the work Homo academicus, seeks to examine, in an exploratory approach, the operation modes from academic and diffusion fi elds, opposing the actions from so-called experts and intellectual media, or intermediaries.