Desenvolvimento de um eletrodo modificado com monocamadas auto-organizadas e sua utilização como biossesor

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The impact of the addition of iodoform on the physicochemical properties of an epoxy-based endodontic sealer

Due to the low radiopacity of Sealer 26, iodoform is frequently empirically added to this sealer. Thus, the interference of this procedure with the physicochemical properties of Sealer 26 must be evaluated. Objective: This study evaluated the influence of the addition of iodoform on setting time, flow, solubility, pH, and calcium release of an epoxy-based sealer. Material and Methods: The control group was pure Sealer 26, and the experimental groups were Sealer 26 added with 1.1 g, 0.55 g or 0.275 g of iodoform. Setting time evaluation was performed in accordance with the ASTM C266-03 speciflcation. The analysis of flow and solubility was in accordance with the ISO 6876-2001 speciflcation. For the evaluation of pH and calcium ion release, polyethylene tubes were filled with the materials and immersed in flasks with 10 ml of deionized water. After 24 h, 7, 14, 21, 28, and 45 days pH was measured. In 45 days, the calcium released was evaluated with an atomic absorption spectrophotometer. Results: The addition of iodoform increased setting time in comparison with pure sealer (P < 0.05). As for flow, solubility, and calcium release, the mixtures presented results similar to pure sealer (p > 0.05). In the 24 h period, the mixture with 1.1 g and 0.55 g of iodoform showed lower pH than pure sealer and than sealer added with 0.275 g of iodoform (P < 0.05). Conclusions: The iodoform added to Sealer 26 interferes with its setting time and solubility properties. Further studies are needed to address the clinical signiflcance of this interference.

Isolation and biochemical characterization of a gamma-type phospholipase A2 inhibitor from Crotalus durissus collilineatus snake serum

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of menthol in experimentally induced ulcers: Pathways of gastroprotection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical changes in an oxisol treated with pyroligneous acid

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PURIFICATION AND CHARACTERIZATION OF SOY COTYLEDON -GLUCOSIDASE

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Outlining precision boundaries among areas with different variability standards using magnetic susceptibility and geomorphic surfaces

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relações entre fósforo extraído por resina e respostas da cultura do alho vernalizado à adubação fosfatada em cinco solos com e sem adubação orgânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of litter manipulation in a tropical Eucalyptus plantation on leaching of mineral nutrients, dissolved organic nitrogen and dissolved organic carbon

Although many studies have shown that soil solution chemistry can be a reliable indicator of biogeochemical cycling in forest ecosystems, the effects of litter manipulations on the fluxes of dissolved elements in gravitational soil solutions have rarely been investigated. We estimated the fluxes of NH4-N, NO3-N, K, Ca, Mg, Na, Cl, dissolved organic nitrogen (DON) and dissolved organic carbon (DOC) over the first two years after re-planting Eucalyptus trees in the coastal area of Congo. Two treatments were replicated in two blocks after clear-cutting 7-year-old stands: in treatment R, all the litter above the mineral soil was removed before planting, and in a double slash (DS) treatment, the amount of harvest residues was doubled. The soil solutions were sampled down to a depth of 4 m and the water fluxes were estimated using the Hydrus 1D model parameterized from soil moisture measurements in 4 plots. Isotopic and spectroscopic analytical techniques were used to assess the changes in dissolved organic matter (DOM) properties throughout the transfer in the soil. The first year after planting, the fluxes of NH4-N, K, Ca, Mg, Na, Cl and DOC in the topsoil of the DS treatment were 2-5 times higher than in R, which showed that litter was a major source of dissolved nutrients. Nutrient fluxes in gravitational solutions decreased sharply in the second year after planting, irrespective of the soil depth, as a result of intense nutrient uptake by Eucalyptus trees. Losses of dissolved nutrients were noticeably low in these Eucalyptus plantations despite a low cation exchange capacity, a coarse soil texture and large amounts of harvest residues left on-site at the clear cut in the DS treatment. All together, these results clarified the strong effect of litter manipulation observed on eucalypt growth in Congolese sandy soils. DOM fluxes, as well as changes in delta C-13, C:N and aromaticity of DOM throughout the soil profile showed that the organic compounds produced in the litter layer were mainly consumed by microorganisms or retained in the topsoil. Below a depth of 15 cm, most of the DOC and the DON originated from the first 2 cm of the soil and the exchanges between soil solutions and soil organic matter were low. (C) 2014 Elsevier B.V. All rights reserved.

Determination of mercury in river water by diffusive gradients in thin films using P81 membrane as binding layer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vitrocerâmicas para blindagens balísticas

The use of ceramic materials in ballistic armor is considerable. Such materials can be very harder and lighter than metallic materials commonly used and it presents advantages to replace metallic materials when necessary toughness can be achieved. However, as SiC and Al2O3 ceramic, traditionally used for shielding, still have high manufacturing cost or low density do not have enough to shield applications such as aircraft. An alternative is the glass-ceramics, ceramics obtained by controlled crystallization of glasses, whose properties can be adjusted by choosing the chemical composition of glass, heat treatment of crystallization and special treatments such as ion exchange on the surface, resulting in increased mechanical strength . The objective of this project is to study the kinetics of crystallization of a glass composition based on cordierite (2MgO.2Al2O3.5SiO2), low density and high hardness, for the manufacture of glass-ceramics for ballistic tests. Shown in this report are results of heat treatment of crystallization and characterization by thermal analysis (DSC) glass obtained previously, indicating uneven distribution of crystals, and drying, weighing, mixing of raw materials and a new fusion of glass, the same composition

Determinação de Cd, Cu, Ni, Pb e Zn em águas marinhas oriundas da Bacia Potiguar utilizando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

The DGT technique has been used to determine and better understand the dynamics and bioavailability of metals in the sea near to marine outfalls. In this work, the DGT was assessed for the determination of Cd, Pb, Cu, Zn and Ni in marine water samples from Potiguar Basin in its conventional aspect (binding agent, Chelex-100 and diffusive agent: Diffusive polyacrylamide gel (D) and restrictive (R)) and determination of Pb and Cd through its alternative aspect (binding agent: Saccharomyces cerevisiae immobilized in agarose gels and diffusive agent: 3MM Chromatography Paper). The deployment curves for long periods of immersion in the sample, showed a good linear correlation for the conventional aspect to Zn (D: R²=0.9586, R: R²=0.9444), Ni (D: R²=0.9789, R: R²=0.9286) and Cu (D: R²=0.764, R: R²=0.8143), and alternative to Pb (R²=0.9228) and Cd (R²=0.9673). The results of the organic and inorganic composition analysis in conventional aspect, showed that for every element there is no significant fraction of organic compounds in the sample. In addition, considering the alternative aspect, the comparison of obtained and expected masses suggests that some of the Pb is not labile and that the main retention mechanism of Pb for S. Cerevisiae occurs through ion exchange

Variabilidade espacial dos atributos físicos e químicos em um gleissolo mecânico sob três áreas no município Arari - MA

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Purification and properties of polygalacturonase produced by thermophilic fungus Thermoascus aurantiacus CBMAI-756 on solid-state fermentation

Polygalacturonases are enzymes involved in the degradation of pectic substances, being extensively used in food industries, textile processing, degumming of plant rough fibres, and treatment of pectic wastewaters. Polygalacturonase (PG) production by thermophilic fungus Thermoascus aurantiacus on solid-state fermentation was carried out in culture media containing sugar cane bagasse and orange bagasse in proportions of 30% and 70% (w/w) at 45°C for 4 days. PG obtained was purified by gel filtration and ion-exchange chromatography. The highest activity was found between pH 4.5 and 5.5, and the enzyme preserved more than 80% of its activity at pH values between 5.0 and 6.5. At pH values between 3.0 and 4.5, PG retained about 73% of the original activity, whereas at pH 10.0 it remained around 44%. The optimum temperature was 60–65°C. The enzyme was completely stable when incubated for 1 hour at 50°C. At 55°C and 60°C, the activity decreased 55% and 90%, respectively. The apparent molecular weight was 29.3 kDa, Km of 1.58 mg/mL and Vmax of 1553.1μmol/min/mg. The presence of Zn+2, Mn+2, and Hg+2 inhibited 59%, 77%, and 100% of enzyme activity, respectively. The hydrolysis product suggests that polygalacturonase was shown to be an endo/exoenzyme.

Preparação e propriedades de zeólitas faujasita contendo cátions amônio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)