Niedrige Gehalte an toxischen Schwermetallen in Seefischfilet (Ergebnisse der 81. Reise des FFS "Walther Herwig")

Auf der 81. Reise des FFS "Walther Herwig" im März 1987 in die Gewässer östlich Schottlands, Irlands und Nordfrankreichs wurden auf dem Nord-Süd-Schnitt "Westbritische Gewässer-östlicher Kanalausgang nördliche Biskaya" zahlreiche Einzelfischproben für die spätere spurenanalytische Bestimmung der toxischen Schwermetalle Blei und Cadmium gezogen. Bei den Proben handelt es sich um den verzehrbaren Anteil (Muskel, Filet) von kommerziell genutzten Meeresfischen, die den Hols lebend entnommen wurden.

Heavy metal pollution in sediments at shipbreaking area of Bangladesh

The research was carried out to assess the trace metal concentration in sediments of ship breaking area in Bangladesh. The study areas were separated into Ship breaking Zone and Reference Site for comparative analysis. Metals like Iron ( Fe) was found at 11932 to 41361.71µg.g-1 in the affected site and 3393.37 µg.g-1 in the control site. Manganese (Mn) varied from 2.32 to 8.25 µg.g-1 in the affected site where as it was recorded as 1.8 µg.g-1 in the control area. Chromium(Cr), Nickel (Ni), Zinc(Zn) and Lead (Pb) were also varied from 22.89 to 86.72 µg.g-1; 23.12 to 48.6;83.78 to 142.85 and 36.78 to 147.83 µg.g-1 respectively in the affected site whereas these were recorded as 19; 3.98; 22.22 and 8.82 µg.g-1 in the control site. Copper (Cu); Cadmium (Cd) and Mercury (Hg) concentration were varied from 21.05 to 39.85; 0.57 to 0.94 and 0.05 to 0.11 µg.g-1 in the affected site and 33.0; 0.115 and 0.01 µg.g-1 in the control site. It may conclude that heavy metal pollution in sediments at ship breaking area of Bangladesh is at alarming stage.

Remoção de metais pesados de efluentes sintéticos aquosos por nanofiltração

O objetivo deste trabalho foi estudar a remoção de metais pesados de efluentes sintéticos aquosos através de nanofiltração, com utilização de membrana de poliamida. A membrana utilizada constituída de poliamida apresentou uma boa permeabilidade hidráulica, constatada pela linearidade de fluxo com a variação de pressão de trabalho. Os metais estudados foram cobre, cádmio, zinco, chumbo e níquel com especiação de nitrato e sulfato. O desempenho do sistema foi verificado pela variação dos parâmetros operacionais (pressão e fluxo), associados também com a variação da salinidade e da concentração do metal. Em uma etapa inicial estudou-se a remoção de metais (nitrato e sulfato) isoladamente em uma mesma concentração molar, na pressão de 10 bar, comparando-se as rejeições com e sem agente complexante (EDTA). Em uma segunda etapa, estudou-se o desempenho da membrana, com misturas dos metais (nitrato) e mistura de metais (sulfato), também com e sem agente complexante, os resultados mostraram que a presença de agente complexante melhorou a rejeição dos metais. Nestas misturas estudaram-se os efeitos das concentrações (0,001; 0,0005 e 0,0001mol/L) e das pressões (5; 7; 10 e 12,5 bar) no sistema de remoção, constatou-se que o aumento da concentração e diminuição da pressão afeta a remoção. Em uma terceira etapa, estudou-se a influência da salinidade pela mistura de dois metais de mesma especiação (sulfato), comparando a remoção na pressão de 10 bar. Os resultados atestaram uma rejeição maior que 94 % para todos metais, na pressão de 10 bar, indicando um excelente desempenho e fluxo adequado, daí viabilidade de processo para todas as concentrações testadas. A pertinência do teste se justifica pela adequação do permeado ao atendimento aos padrões ambientais de concentração de metais e confirmam a eficácia do sistema de nanofiltração na remoção de metais pesados

Engineering and Characterization of Cytochrome P450 Enzymes for Nitrogen-Atom Transfer Reactions

The creation of novel enzyme activity is a great challenge to protein engineers, but nature has done so repeatedly throughout the process of natural selection. I begin by outlining the multitude of distinct reactions catalyzed by a single enzyme class, cytochrome P450 monooxygenases. I discuss the ability of cytochrome P450 to generate reactive intermediates capable of diverse reactivity, suggesting this enzyme can also be used to generate novel reactive intermediates in the form of metal-carbenoid and nitrenoid species. I then show that cytochrome P450 from Bacillus megaterium (P450_BM3) and its isolated cofactor can catalyze metal-nitrenoid transfer in the form of intramolecular C–H bond amination. Mutations to the protein sequence can enhance the reactivity and selectivity of this transformation significantly beyond that of the free cofactor. Next, I demonstrate an intermolecular nitrene transfer reaction catalyzed by P450_BM3 in the form of sulfide imidation. Understanding that sulfur heteroatoms are strong nucleophiles, I show that increasing the sulfide nucleophilicity through substituents on the aryl sulfide ring can dramatically increase reaction productivity. To explore engineering nitrenoid transfer in P450BM3, active site mutagenesis is employed to tune the regioselectivity intramolecular C–H amination catalysts. The solution of the crystal structure of a highly selective variant demonstrates that hydrophobic residues in the active site strongly modulate reactivity and regioselectivity. Finally, I use a similar strategy to develop P450-based catalysts for intermolecular olefin aziridination, demonstrating that active site mutagenesis can greatly enhance this nitrene transfer reaction. The resulting variant can catalyze intermolecular aziridination with more than 1000 total turnovers and enantioselectivity of up to 99% ee.

Monitoramento microbiológico e físico-químico de tanques de armazenamento de óleo e água

A injeção da água do mar nos campos marítimos (offshore), processo este conhecido como recuperação secundária de petróleo, gera muitos resíduos e efluentes. Dentre estes, pode-se destacar a água produzida, que consiste de água de formação, água naturalmente presente na formação geológica do reservatório de petróleo, e água de injeção, aquela normalmente injetada no reservatório para aumento de produção. Sete tanques de armazenamento de água/óleo de um terminal foram monitorados quanto à presença de micro-organismos e teores de sulfato, sulfeto, pH e condutividade. Particularmente, as bactérias redutoras de sulfato (BRS), que agem às expensas da atividade de outras espécies, reduzindo sulfato à sulfeto, constituindo-se num problema-chave. Os tanques de óleo codificados como Verde, Ciano, Roxo, Cinza, Vermelho, Amarelo e Azul, apresentaram comportamentos distintos quanto aos parâmetros microbiológicos e físico-químicos. Após este monitoramento, de acordo com valores referência adotados, e levando-se em conta como principais parâmetros classificatórios concentrações de BRS, bactérias anaeróbias totais e sulfeto, os dois tanques considerados mais limpos do monitoramento foram os tanques roxo e ciano. Analogamente, por apresentarem os piores desempenhos frente aos três principais parâmetros, os tanques amarelo e cinza foram considerados os mais sujos de todo o monitoramento. Após esta segregação, esses três principais parâmetros, mais a concentração de sulfato, foram inter-relacionados a fim de se corroborar esta classificação. Foi possível observar que o sulfeto instantâneo não foi o parâmetro mais adequado para se avaliar o potencial metabólico de uma amostra. Por este motivo, foram verificados os perfis metabólicos das BRS presentes nas amostras, confirmando a segregação dos tanques, baseada em parâmetros em batelada

Photonic and Device Design Principles for Ultrahigh-Efficiency (>50%), Spectrum-Splitting Photovoltaics

The sun has the potential to power the Earth's total energy needs, but electricity from solar power still constitutes an extremely small fraction of our power generation because of its high cost relative to traditional energy sources. Therefore, the cost of solar must be reduced to realize a more sustainable future. This can be achieved by significantly increasing the efficiency of modules that convert solar radiation to electricity. In this thesis, we consider several strategies to improve the device and photonic design of solar modules to achieve record, ultrahigh (> 50%) solar module efficiencies. First, we investigate the potential of a new passivation treatment, trioctylphosphine sulfide, to increase the performance of small GaAs solar cells for cheaper and more durable modules. We show that small cells (mm2), which currently have a significant efficiency decrease (~ 5%) compared to larger cells (cm2) because small cells have a higher fraction of recombination-active surface from the sidewalls, can achieve significantly higher efficiencies with effective passivation of the sidewalls. We experimentally validate the passivation qualities of treatment by trioctylphosphine sulfide (TOP:S) through four independent studies and show that this facile treatment can enable efficient small devices. Then, we discuss our efforts toward the design and prototyping of a spectrum-splitting module that employs optical elements to divide the incident spectrum into different color bands, which allows for higher efficiencies than traditional methods. We present a design, the polyhedral specular reflector, that has the potential for > 50% module efficiencies even with realistic losses from combined optics, cell, and electrical models. Prototyping efforts of one of these designs using glass concentrators yields an optical module whose combined spectrum-splitting and concentration should correspond to a record module efficiency of 42%. Finally, we consider how the manipulation of radiatively emitted photons from subcells in multijunction architectures can be used to achieve even higher efficiencies than previously thought, inspiring both optimization of incident and radiatively emitted photons for future high efficiency designs. In this thesis work, we explore novel device and photonic designs that represent a significant departure from current solar cell manufacturing techniques and ultimately show the potential for much higher solar cell efficiencies.

The Design and Synthesis of Transition Metal Complexes Supported by Non-innocent Ligand Scaffolds for Small Molecule Activation

This dissertation focuses on the incorporation of non-innocent or multifunctional moieties into different ligand scaffolds to support one or multiple metal centers in close proximity. Chapter 2 focuses on the initial efforts to synthesize hetero- or homometallic tri- or dinuclear metal carbonyl complexes supported by para-terphenyl diphosphine ligands. A series of [M₂M’(CO)₄]-type clusters (M = Ni, Pd; M’ = Fe, Co) could be accessed and used to relate the metal composition to the properties of the complexes. During these studies it was also found that non-innocent behavior was observed in dinuclear Fe complexes that result from changes in oxidation state of the cluster. These studies led to efforts to rationally incorporate central arene moieties capable managing both protons and electrons during small molecule activation.

Chapter 3 discusses the synthesis of metal complexes supported by a novel para-terphenyl diphosphine ligand containing a non-innocent 1,4-hydroquinone moiety as the central arene. A Pd⁰-hydroquinone complex was found to mediate the activation of a variety of small molecules to form the corresponding Pd⁰-quinone complexes in a formal two proton ⁄ two electron transformation. Mechanistic investigations of dioxygen activation revealed a metal-first activation process followed by subsequent proton and electron transfer from the ligand. These studies revealed the capacity of the central arene substituent to serve as a reservoir for a formal equivalent of dihydrogen, although the stability of the M-quinone compounds prevented access to the PdII-quinone oxidation state, thus hindering of small molecule transformations requiring more than two electrons per equivalent of metal complex.

Chapter 4 discusses the synthesis of metal complexes supported by a ligand containing a 3,5-substituted pyridine moiety as the linker separating the phenylene phosphine donors. Nickel and palladium complexes supported by this ligand were found to tolerate a wide variety of pyridine nitrogen-coordinated electrophiles which were found to alter central pyridine electronics, and therefore metal-pyridine π-system interactions, substantially. Furthermore, nickel complexes supported by this ligand were found to activate H-B and H-Si bonds and formally hydroborate and hydrosilylate the central pyridine ring. These systems highlight the potential use of pyridine π-system-coordinated metal complexes to reversibly store reducing equivalents within the ligand framework in a manner akin to the previously discussed 1,4-hydroquinone diphosphine ligand scaffold.

Chapter 5 departs from the phosphine-based chemistry and instead focuses on the incorporation of hydrogen bonding networks into the secondary coordination sphere of [Fe₄(μ₄-O)]-type clusters supported by various pyrazolate ligands. The aim of this project is to stabilize reactive oxygenic species, such as oxos, to study their spectroscopy and reactivity in the context of complicated multimetallic clusters. Herein is reported this synthesis and electrochemical and Mössbauer characterization of a series of chloride clusters have been synthesized using parent pyrazolate and a 3-aminophenyl substituted pyrazolate ligand. Efforts to rationally access hydroxo and oxo clusters from these chloride precursors represents ongoing work that will continue in the group.

Appendix A discusses attempts to access [Fe₃Ni]-type clusters as models of the enzymatic active site of [NiFe] carbon monoxide dehydrogenase. Efforts to construct tetranuclear clusters with an interstitial sulfide proved unsuccessful, although a (μ₃-S) ligand could be installed through non-oxidative routes into triiron clusters. While [Fe₃Ni(μ₄-O)]-type clusters could be assembled, accessing an open heterobimetallic edge site proved challenging, thus prohibiting efforts to study chemical transformations, such as hydroxide attack onto carbon monoxide or carbon dioxide coordination, relevant to the native enzyme. Appendix B discusses the attempts to synthesize models of the full H-cluster of [FeFe]-hydrogenase using a bioinorganic approach. A synthetic peptide containing three cysteine donors was successfully synthesized and found to chelate a preformed synthetic [Fe₄S₄] cluster. However, efforts to incorporate the diiron subsite model complex proved challenging as the planned thioester exchange reaction was found to non-selectively acetylate the peptide backbone, thus preventing the construction of the full six-iron cluster.

I. Configurational stability and redistribution equilibria in organomagnesium compounds. II. Redistribution equilibria in organocadmium compounds

I. CONFIGURATIONAL STABILITY AND REDISTRIBUTION EQUILIBRIA IN ORGANOMAGNESIUM COMPOUNDS

The dependence of the rate of inversion of a dialkylmagnesium compound on the solvent has been studied.

Examination of the temperature dependence of the nuclear magnetic resonance spectrum of 1-phenyl-2-propylmagnesium bromide in diethyl ether solution indicates that inversion of configuration at the methylene group of this Grignard reagent occurs with an approximate rate of 2 sec^-1 at room temperature. This is the first example of a rapid inversion rate in a secondary Grignard reagent.

The rates of exchange of alkyl groups between dineopentylmagnesium and di-s-butylmagnesium, bis-(2-methylbutyl)-magnesium and bis-(4, 4-dimethyl-2-pentyl)-magnesium respectively in diethyl ether solution were found to be fast on the nmr time scale. However, the alkyl group exchange rate was found to be slow in a diethyl ether solution of dineopentylmagnesium and bis-(2-methylbutyl)-magnesium containing N, N, N', N'-tetramethylethylenediamine. The unsymmetrical species neopentyl-2-methylbutyl-magnesium was observed at room temperature in the nmr spectrum of the solution containing the diamine.

II. REDISTRIBUTION EQUILIBRIA IN ORGANOCADMIUM COMPOUNDS

The exchange of methyl groups in dimethylcadmium has been studied by nuclear magnetic resonance spectroscopy. Activation parameters for the methyl group exchange have been measured for a neat sample and for a solution in tetrahydrofuran. The exchange is faster in the basic solvent tetrahydrofuran relative to the neat sample and in tetrahydrofuran solution is retarded by the solvating agent N, N, N’, N’-tetramethylethylenediamine and greatly increased by cadmium bromide. The addition of methanol to a solution of dimethylcadmium in tetrahydrofuran appears to have very little effect on the rate of exchange. The exchange was found to proceed with retention of configuration. The rate-limiting step for the exchange of methyl groups in a basic solvent appears to be the dissociation of coordinating solvent from dimethylcadmium.

The equilibrium between methylcadmium bromide, dimethylcadmium and cadmium bromide in tetrahydrofuran solution has also been studied. At room temperature the interconversion of the species is very fast on the nmr time scale but at -100° distinct absorptions for methylcadmium bromide and imethylcadmium are observed.

The species ethylmethylcadmium has been observed in the nmr spectrum.

The rate of exchange of vinyl groups in a solution of divinylcadmium in tetrahydrofuran has been found to be fast on the nmr time scale.

Processo de separação por membranas para remoção de sulfato de níquel e zinco de efluente sintético de indústrias metal-mecânicas

O objetivo do presente trabalho foi investigar o desempenho de membranas comerciais e funcionalizadas na remoção de metais pesados de efluentes sintéticos, simulando os efluentes gerados pelas indústrias metal-mecânicas. As membranas funcionalizadas foram preparadas em laboratório a partir de diferentes poli (éter imidas) sulfonadas, SPEI, que apresentavam alta hidrofilicidade e capacidade de troca iônica. As permeabilidades hidráulicas das membranas de SPEI aumentaram com o grau de sulfonação. Porém, as rejeições foram ainda muito baixas comparadas as membranas comerciais. Por esta razão, algumas membranas comerciais (NF-90, SW30, HRP98PP e BW30LE) foram investigadas e avaliadas quanto ao comportamento da permeabilidade de água e o grau de rejeição a metais pesados. Os resultados mostraram que a membrana de osmose inversa de baixa energia (BW30LE) tinha o melhor fluxo de água (48,44 L/h.m2) e grau de rejeição a cádmio (98%). Logo, ela foi selecionada para o tratamento dos efluentes sintéticos de indústrias metal-mecânicas contendo níquel e zinco. As indústrias da região de Valencia, na Espanha, forneceram amostras de seus efluentes para análise quantitativa, possibilitando o prepararo de soluções sintéticas modelos. Os resultados foram obtidos variando algumas condições de permeação, tais como a força motriz, o pH e a concentração dos metais na solução de alimentação. Os resultados indicaram que o processo de osmose inversa com a membrana BW30LE é altamente adequado para o tratamento de efluentes contendo metais pesados

Effects of stress on the immune system of fish

The effects of stress on the immune system of various fish species including dab Limanda limanda, flounder Platichthys flesus, sea bass Dicentrarchus labrax and gobies Zosterisessor ophiocephalus, were investigated from laboratory and field experiments, using various assays to measure immunocompetence, correlated with histological and ultrastructural observations. Modulation of the immune system was demonstrated at tissue, cellular and biochemical levels following exposure to various stressors. The spleen somatic index was depressed in dab stressed in the laboratory and gobies collected from polluted sites in the Venice Lagoon. Differential blood cell counts consistently showed an increase in phagocytes and decrease in thrombocytes in fish exposed to various stressors. Phagocytic activity from spleen and kidney adherent cells was stimulated in dab stressed by transportation but depressed in fish exposed to chemical pollutants. Respiratory burst activity in phagocytic cells was also stimulated in stressed dab but depressed in sea bass exposed to cadmium. The results are discussed in relation to current concepts on stress in fish and the regulation of the immune system.

Efeito da temperatura de incubação na cinética e no equilíbrio da biossorção do cádmio por Sargassum filipendula

O uso de biomassas para biossorção de metais pesados é bem documentado na literatura e vários tipos de espécies de microrganismos e algas já foram testados. A maior parte destes trabalhos foi realizada com biomassa seca para prevenir qualquer resposta metabólica indesejável. Vários estudos na literatura sugerem o uso de biomassa seca sobre condições moderadas, tais como secagem ao sol; por outro lado, vários trabalhos recomendam a faixa de 313K a 353K para garantir completa inativação da biomassa. O efeito da biomassa seca ao sol a 303K e seca a 333K em estufa na remoção de Cd2+ é aqui reportado. A avaliação dos resultados foi baseada na cinética e capacidade de remoção do metal pela alga Sargassum filipendula. Os resultados indicam que a adsorção máxima de metal não foi notadamente reduzida quando a biomassa seca em estufa foi usada, para concentrações de cádmio na faixa de 10,0 a 500,0 mg L-1. O estudo cinético realizado indicou que o modelo de pseudo segunda ordem ajustou melhor os dados experimentais, tanto para uma solução diluída (10 mg L-1) quanto para a concentrada (100 mg L-1). Em ambos os casos, os efeitos da secagem em estufa, a 60C refletiu-se suavemente na remoção do metal. Os dados experimentais foram melhor ajustados pelo modelo de Langmuir em comparação com o modelo de Freundlich. Análises termogravimétricas mostraram que não havia dano estrutural no biossorvente devido à secagem em estufa. O espectro de infravermelho não indicou diferença entre a biomassa in natura e seca. O efeito da temperatura na biossorção do metal significativo na faixa de 303K a 328K, refletindo-se na capacidade de remoção do cádmio

Estudo de corrosão em sistema simulado de retortagem para processamento de folhelhos pirobetuminosos

O aço inoxidável é amplamente utilizado em sistemas para processamento e obtenção de derivados de folhelhos pirobetuminosos. Em função dos problemas de corrosão, originários da composição química dos folhelhos e do processamento em si, são gastos anualmente valores expressivos em manutenção e paradas programadas para reparos nestes sistemas. O presente trabalho busca estudar o processo de corrosão do aço inoxidável AISI 304L em meio simulado de retortagem de folhelhos, em condições de alta temperatura e em presença de elevados teores de enxofre, orgânico e inorgânico, empregando técnicas microscópicas e eletroquímicas. Os resultados mostraram que a temperatura influencia diretamente no processo de corrosão do aço, causando modificação na camada externa de óxidos. Este processo é agravado com a presença de sulfetos no meio, havendo formação, principalmente, de sulfetos de ferro sobre a superfície do aço inoxidável AISI 304L e consequente aumento do processo de corrosão. Foi observado que o enxofre de origem orgânica promove maior destruição da camada de óxido protetor do aço e aumento na formação do filme de sulfeto aderido à superfície deste material. Verificou-se ainda que o processo corrosivo é predominantemente químico, sendo o filme formado considerado protetor, do ponto de vista eletroquímico, no meio eletrolítico estudado

Revisión bibliográfica del tratamiento de biogás por biofiltración.

[ES]En el siguiente trabajo se ha realizado una revisión bibliográfica en la que se muestran los resultados obtenidos al llevar a cabo la purificación del biogás y/o la eliminación del metano, en los casos en los que su valorización no sea posible, mediante métodos biológicos (biofiltración). Se recogen asimismo las diversas fuentes desde las que se genera el biogás (generación incontrolada o producción controlada) junto con las concentraciones típicas de todos los compuestos que pueden formar su composición. En la purificación del biogás se ha estudiado la eliminación de compuestos perjudiciales para el aprovechamiento energético del biogás, como son el sulfuro de hidrógeno (H2S), los mercaptanos y los siloxanos. Para el estudio de los compuestos a eliminar se ha diferenciado entre distintas configuraciones de biorreactores (biofiltros, biofiltros percoladores y biolavadores) y para cada una de ellas se han recogido datos representativos como la temperatura óptima de operación, las diferencias entre operar a pH ácido o básico (teniendo en cuenta que el pH natural de operación es ácido pero que en estas condiciones la solubilidad del H2S es menor y el relleno se deteriora con mayor rapidez). También se ha analizado la influencia de la cantidad de oxígeno necesario para garantizar la degradación total de los contaminantes y evitar la acumulación de depósitos de azufre, llegando incluso a necesitarse proporciones de O2/H2S de 49.2 para la oxidación completa del H2S. Se ha estudiado también la cantidad necesaria de nitrógeno (nutriente) en los procesos llevados a cabo en condiciones anaerobias (cercana a 200 mgN-NO3 -/L), así como el efecto que tienen los compuestos producidos en la oxidación parcial (azufre elemental (S0), metanol, formaldehido, etc.) en el funcionamiento del sistema.

Formation, thermal, optical and physical properties of GeS2-Ga2S3-AgCl novel chalcohalide glasses

Novel GeS2-Ga2S3-AgCl chalcohalide glasses had been prepared by melt-quenching technique, and the glass-forming region was determined by XRD, which indicated that the maximum of dissolvable AgCl was up to 65 mol%. Thermal and optical properties of the glasses were studied by differential scanning calorimetry (DSC) and Visible-IR transmission, which showed that most of GeS2-Ga2S3-AgCl glasses had strong glass-forming ability and broad region of transmission (about 0.45-12.5 mu m). With the addition of AgCl, the glass transition temperature, Tg decreases distinctly, and the short-wavelength cut-off edge (lambda(vis)) of the glasses also shifts to the long wavelength gradually. However, the glass-forming ability of the glass has a complicated evolutional trend depended on the compositional change. In addition, the values of the Vickers microhardness, H (v) , which decrease with the addition of AgCl, are high enough for the practical applications. These excellent properties of GeS2-Ga2S3-AgCl glasses make them potentially applied in the optoelectronic field, such as all-optical switch, etc.

Novel erbium-doped TeO2-based oxysulfide glasses: thermal and spectroscopic properties

Er3+-doped TeO2-based oxysulfide glasses have been prepared in argon atmosphere in carbon crucibles. The thermal analysis and spectroscopic properties of Er (3+) have been considered in terms of sulfide influence. As a function of composition, we have principally measured optical absorption, spontaneous emission and lifetime measurements. Judd-Ofelt theory was introduced to calculate bandwidth and emission cross-section. The results show the product FVMM x sigma(c) increase from 476.8 8 to 635.04 10(-21) cm(2) nm evidently with the addition of 10 mol% PbS into tellurite glass, which indicates a perfect effect on spectra property of Er3+ ions. (C) 2004 Elsevier B.V. All rights reserved.