978 resultados para C-axis Resistivity


Relevância:

20.00% 20.00%

Publicador:

Resumo:

O estudo teve por objetivo estimar a prevalência da infecção e genótipo do vírus da hepatite C (HCV), bem como determinar a subnotificação de casos. O total de 115.386 gestantes atendidas pelo Programa Estadual de Proteção à Gestante de Mato Grosso do Sul foi submetido à coleta de sangue para a detecção de anti-HCV, de 2005 a 2007. A prevalência da infecção pelo HCV foi de 1,07 casos/1.000. As amostras positivas foram submetidas à detecção do HCV-RNA e genotipadas. O genótipo 1 foi encontrado em 73% das amostras, 24,3% pertenciam ao genótipo 3 e 2,7% ao genótipo 2. A subnotificação de casos de hepatite C foi de 35,5%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thin films of Cu2SnS3 and Cu3SnS4 were grown by sulfurization of dc magnetron sputtered Sn–Cu metallic precursors in a S2 atmosphere. Different maximum sulfurization temperatures were tested which allowed the study of the Cu2SnS3 phase changes. For a temperature of 350 ◦C the films were composed of tetragonal (I -42m) Cu2SnS3. The films sulfurized at a maximum temperature of 400 ◦C presented a cubic (F-43m) Cu2SnS3 phase. On increasing the temperature up to 520 ◦C, the Sn content of the layer decreased and orthorhombic (Pmn21) Cu3SnS4 was formed. The phase identification and structural analysis were performed using x-ray diffraction (XRD) and electron backscattered diffraction (EBSD) analysis. Raman scattering analysis was also performed and a comparison with XRD and EBSD data allowed the assignment of peaks at 336 and 351 cm−1 for tetragonal Cu2SnS3, 303 and 355 cm−1 for cubic Cu2SnS3, and 318, 348 and 295 cm−1 for the Cu3SnS4 phase. Compositional analysis was done using energy dispersive spectroscopy and induced coupled plasma analysis. Scanning electron microscopy was used to study the morphology of the layers. Transmittance and reflectance measurements permitted the estimation of absorbance and band gap. These ternary compounds present a high absorbance value close to 104 cm−1. The estimated band gap energy was 1.35 eV for tetragonal (I -42m) Cu2SnS3, 0.96 eV for cubic (F-43m) Cu2SnS3 and 1.60 eV for orthorhombic (Pmn21) Cu3SnS4. A hot point probe was used for the determination of semiconductor conductivity type. The results show that all the samples are p-type semiconductors. A four-point probe was used to obtain the resistivity of these samples. The resistivities for tetragonal Cu2SnS3, cubic Cu2SnS3 and orthorhombic (Pmn21) Cu3SnS4 are 4.59 × 10−2 cm, 1.26 × 10−2 cm, 7.40 × 10−4 cm, respectively.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE: To perform a systematic review of the prevalence of the HCV/ S. mansoni co-infection and associated factors in Schistosoma mansoni -infected populations. METHODS: The bibliographic search was carried out using the Medline, Lilacs, SciELO, Cochrane Library and Ibecs databases. The criteria for the studies' selection and the extraction data were based on systematic review methods. Forty five studies were found, with nine being excluded in a first screening. Thirteen articles were used for data extraction. RESULTS: The HCV infection rates in schistosomiasis populations range from 1% in Ethiopia to 50% in Egypt. Several studies had poorly defined methodologies, even in areas characterized by an association between hepatitis C and schistosomiasis, such as Brazil and Egypt, which meant conclusions were inconsistent. HCV infection rates in schistosomotic populations were heterogeneous and risk factors for acquiring the virus varied widely. CONCLUSIONS: Despite the limitations, this review may help to identify regions with higher rates of hepatitis C and schistosomiasis association. However, more studies are necessary for the development of public health policies on prevention and control of both diseases.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The Journal of Biological Chemistry Vol. 278, No. 19, Issue of May 9, pp. 17455–17465, 2003

Relevância:

20.00% 20.00%

Publicador:

Resumo:

J Biol Inorg Chem (2003) 8: 777–786

Relevância:

20.00% 20.00%

Publicador:

Resumo:

OBJECTIVE To estimate the prevalence of hepatitis C virus infection in Brazil’s inmate population.METHODS Systematic review on hepatitis C virus infection in the inmate population. Brazilian studies published from January 1, 1989 to February 20, 2014 were evaluated. The methodological quality of the studies was assessed using a scale of 0 to 8 points.RESULTS Eleven eligible studies were analyzed and provided data on hepatitis C virus infection among 4,375 inmates from seven states of Brazil, with a mean quality classification of 7.4. The overall hepatitis C virus prevalence among Brazilian inmates was 13.6% (ranging from 1.0% to 41.0%, depending on the study). The chances of inmates being seropositive for hepatitis C virus in the states of Minas Gerais (MG), Sergipe (SE), Mato Grosso do Sul (MS), Rio Grande do Sul (RS), Goiás (GO) and Espirito Santo (ES) were 84.0% (95%CI 0.06;0.45), 92.0% (95%CI 0.04;0.13), 88.0% (95%CI 0.09;0.18), 74.0% (95%CI 0.16;0.42), 84.0% (95%CI 0.08;0.31) and 89.0% (95%CI 0.01;0.05) respectively, lower than that observed in the Sao Paulo state (seroprevalence of 29.3%). The four studies conducted in the city of Sao Paulo revealed a lower prevalence in more recent studies compared to older ones.CONCLUSIONS The highest prevalence of hepatitis C virus infection in Brazil’s inmate population was found in Sao Paulo, which may reflect the urban diversity of the country. Despite Brazilian studies having good methodological quality to evaluate the prevalence of the hepatitis C virus, they are scarce and lack data on risk factors associated with this infection, which could support decisions on prevention and implementation of public health policies for Brazilian prisons.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Invariant integrals are derived for nematic liquid crystals and applied to materials with small Ericksen number and topological defects. The nematic material is confined between two infinite plates located at y = -h and y = h (h is an element of R+) with a semi-infinite plate at y = 0 and x < 0. Planar and homeotropic strong anchoring boundary conditions to the director field are assumed at these two infinite and semi-infinite plates, respectively. Thus, a line disclination appears in the system which coincides with the z-axis. Analytical solutions to the director field in the neighbourhood of the singularity are obtained. However, these solutions depend on an arbitrary parameter. The nematic elastic force is thus evaluated from an invariant integral of the energy-momentum tensor around a closed surface which does not contain the singularity. This allows one to determine this parameter which is a function of the nematic cell thickness and the strength of the disclination. Analytical solutions are also deduced for the director field in the whole region using the conformal mapping method. (C) 2013 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The behavior of tandem pin heterojunctions based on a-SiC: H alloys is investigated under different optical and electrical bias conditions. The devices are optimized to act as optically selective wavelength filters. Depending on the device configuration (optical gaps, thickness, sequence of cells in the stack structure) and on the applied voltage (positive or negative) and optical bias (wavelength, intensity, frequency) it is possible to combine the wavelength discrimination function with the self amplification of the signal. This wavelength nonlinearity allows the amplification or the rejection of a weak signal-impulse. The device works as an active tunable optical filter for wavelength selection and can be used as an add/drop multiplexer (ADM) which enables data to enter and leave an optical network bit stream without having to demultiplex the stream. Results show that, even under weak transient input signals, the background wavelength controls the output signal. This nonlinearity, due to the transient asymmetrical light penetration of the input channels across the device together with the modification on the electrical field profile due to the optical bias, allows tuning an input channel without demultiplexing the stream. This high optical nonlinearity makes the optimized devices attractive for the amplification of all optical signals. Transfer characteristics effects due to changes in steady state light, control d.c. voltage and applied light pulses are presented. Based on the experimental results and device configuration an optoelectronic model is developed. The transfer characteristics effects due to changes in steady state light, dc control voltage or applied light pulses are simulated and compared with the experimental data. A good agreement was achieved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os métodos clínicos que são realizados com recurso a tecnologias de imagiologia têm registado um aumento de popularidade nas últimas duas décadas. Os procedimentos tradicionais usados em cirurgia têm sido substituídos por métodos minimamente invasivos de forma a conseguir diminuir os custos associados e aperfeiçoar factores relacionados com a produtividade. Procedimentos clínicos modernos como a broncoscopia e a cardiologia são caracterizados por se focarem na minimização de acções invasivas, com os arcos em ‘C’ a adoptarem um papel relevante nesta área. Apesar de o arco em ‘C’ ser uma tecnologia amplamente utilizada no auxílio da navegação em intervenções minimamente invasivas, este falha na qualidade da informação fornecida ao cirurgião. A informação obtida em duas dimensões não é suficiente para proporcionar uma compreensão total da localização tridimensional da região de interesse, revelando-se como uma tarefa essencial o estabelecimento de um método que permita a aquisição de informação tridimensional. O primeiro passo para alcançar este objectivo foi dado ao definir um método que permite a estimativa da posição e orientação de um objecto em relação ao arco em ‘C’. De forma a realizar os testes com o arco em ‘C’, a geometria deste teve que ser inicialmente definida e a calibração do sistema feita. O trabalho desenvolvido e apresentado nesta tese foca-se num método que provou ser suficientemente sustentável e eficiente para se estabelecer como um ponto de partida no caminho para alcançar o objectivo principal: o desenvolvimento de uma técnica que permita o aperfeiçoamento da qualidade da informação adquirida com o arco em ‘C’ durante uma intervenção clínica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Penélope. Fazer e desfazer a história, n.14, pág.43-91

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação apresentada para a obtenção do Grau de Mestre em Genética Molecular e Biomedicina, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Athymic BALB/c (Nu/Nu) mice died at 7-13 days after inoculation (DAI) of Plasmodium berghei NK65, whereas their heterozygous (Nu/+) littermates died at 7-8 DAI. Nude (Nu/Nu) mice, reconstituted with 2 x 10(7) splenocytes from uninfected heterozygous (Nu/+) littermates at 20 days before parasite inoculation (DBI), died about 2 days earlier than control nude mice; nude mice reconstituted at 10 or 2 DBI lived 2 to 4 days longer than control nudes; and nude mice reconstituted 2 DAI lived even longer and some survived. These findings indicate that P. berghei NK65 induces at least two T-cell dependent immune phenomena, one suppressive and the other stimulatory. Reconstitution of nude mice with T-cells from BALB/c (Nu/+) mice appeared to reduce or bypass suppressive T-cell activities which allowed the formation of a protective immune response by some of the nude mice.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The clinical and laboratory data of a disease in a resident of Ribeira Valley, São Paulo State, southeastern Brazil, caused by an agent close or identical to Caraparu, a Group C arbovirus, was described. Although there is evidence of an intensive circulation of several arboviruses in the area, no diagnosis of human disease by these agents has been made, except the encephalitis cases caused by Rocio virus during an epidemic in 1975-1977. An antigenic difference between Caraparu strains isolated in São Paulo and in Pará States and a close antigenic relationship between Caraparu strain from São Paulo and Bruconha virus were suggested by the serological tests.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este documento apresenta o trabalho desenvolvido no âmbito da disciplina de “Dissertação/Projeto/Estágio”, do 2º ano do Mestrado em Energias Sustentáveis. O crescente consumo energético das sociedades desenvolvidas e emergentes, associado ao consequente aumento dos custos de energia e dos danos ambientais resultantes, promove o desenvolvimento de novas formas de produção de energia, as quais têm como prioridade a sua obtenção ao menor custo possível e com reduzidos impactos ambientais. De modo a poupar os recursos naturais e reduzir a emissão com gases de efeito de estufa, é necessária a diminuição do consumo de energia produzida a partir de combustíveis fósseis. Assim, devem ser criadas alternativas para um futuro sustentável, onde as fontes renováveis de energia assumam um papel fundamental. Neste sentido, a produção de energia elétrica, através de sistemas solares fotovoltaicos, surge como uma das soluções. A presente dissertação tem como principal objetivo a realização do dimensionamento de uma central de miniprodução fotovoltaica, com ligação à rede elétrica, em uma exploração agrícola direcionada à indústria de laticínios, e o seu respetivo estudo de viabilidade económica. A exploração agrícola, que serve de objeto de estudo, está localizada na Ilha Graciosa, Açores, sendo a potência máxima a injetar na Rede Elétrica de Serviço Público, pela central de miniprodução, de 10 kW. Para o dimensionamento foi utilizado um software apropriado e reconhecido na área da produção de energia elétrica através de sistemas fotovoltaicos – o PVsyst –, compreendendo as seguintes etapas: a) definição das caraterísticas do local e do projeto; b) seleção dos módulos fotovoltaicos; c) seleção do inversor; d) definição da potência de ligação à rede elétrica da unidade de miniprodução. Posteriormente, foram estudadas diferentes hipóteses de sistemas fotovoltaicos, que se distinguem na opção de estrutura de fixação utilizada: dois sistemas fixos e dois com eixo incorporado. No estudo de viabilidade económica foram realizadas duas análises distintas a cada um dos sistemas fotovoltaicos considerados no dimensionamento, nomeadamente: uma análise em regime remuneratório bonificado e uma análise em regime remuneratório geral. Os resultados obtidos nos indicadores económicos do estudo de viabilidade económica realizado, serviram de apoio à decisão pelo sistema fotovoltaico mais favorável ao investimento. Conclui-se que o sistema fotovoltaico com inclinação adicional é a opção mais vantajosa em ambos os regimes remuneratórios analisados. Comprova-se, assim, que o sistema fotovoltaico com maior valor de produção de energia elétrica anual, que corresponde ao sistema fotovoltaico de dois eixos, não é a opção com maior rentabilidade em termos económicos, isto porque a remuneração proveniente da sua produção excedente não é suficiente para colmatar o valor do investimento mais acentuado de modo a obter indicadores económicos mais favoráveis, que os do sistema fotovoltaico com inclinação adicional. De acordo com o estudo de viabilidade económica efetuado independentemente do sistema fotovoltaico que seja adotado, é recuperado o investimento realizado, sendo a remuneração efetiva superior à que foi exigida. Assim, mesmo tendo em consideração o risco associado, comprova-se que todos os sistemas fotovoltaicos, em qualquer dos regimes remuneratórios, correspondem a investimentos rentáveis.