Disabled Revolutionary War Veterans and the Construction of Disability in the Early United States, c. 1776-1840

This thesis addresses the following broad research question: what did it mean to be a disabled Revolutionary War veteran in the early United States during the period from 1776 to roughly 1840? The study approaches the question from two angles: a state-centred one and an experiential one. In both cases, the theoretical framework employed comes from disability studies. Consequently, disability is regarded as a sociocultural phenomenon rather than a medical condition. The state-centred dimension of the study explores the meaning of disability and disabled veterans to the early American state through an examination of the major military pension laws of the period. An analysis of this legislation, particularly the invalid pension acts of 1793 and 1806, indicates that the early United States represents a key period in the development of the modern disability category. The experiential approach, in contrast, shifts the focus of attention away from the state towards the lived experiences of disabled veterans. It seeks to address the issue of whether or not the disabilities of disabled veterans had any significant material impact on their everyday lives. It does this through a comparison of the situation of 153 disabled veterans with that of an equivalent number of nondisabled veterans. The former group received invalid pensions while the latter did not. In comparing the material conditions of disabled and nondisabled veterans, a wide range of primary sources from military records to memoirs and letters are used. The most important sources in this regard are the pension application papers submitted by veterans in the early nineteenth century. These provide us with a unique insight into the everyday lives of veterans. Looking at the issue of experience through the window of the pension files reveals that there was not much difference in the broad contours of disabled and nondisabled veteran life. This finding has implications for the theorisation of disability that are highlighted and discussed in the thesis. The main themes covered in this study are: the wartime experiences of injured American soldiers, the military pension establishment of the early United States and the legal construction of disability, and the post-war working and family lives of disabled veterans. Keywords: disability, early America, veterans, military pensions, disabled people, Revolutionary War, United States, disability theory.

Cytochrome c oxidase is preferentially synthesized in the rough endoplasmic reticulum--mitochondrion complex in rat liver

The specific activity and content of cytochrome oxidase in the rough endoplasmic reticulum--mitochondrion complex are higher than in the mitochondrial fraction. Radiolabelling studies with the use of hepatocytes and isolated microsomal and rough endoplasmic reticulum--mitochondrion fractions, followed by immunoprecipitation with anti-(cytochrome oxidase) antibody, reveal that the nuclear-coded cytoplasmic subunits of cytochrome oxidase are preferentially synthesized in the latter fraction. The results have a bearing on the mechanism of transport of these subunits into mitochondria.

Fatigue crack growth rates and fracture toughness in electroslag refined En 52 steel

En 52 steel has been electroslag refined and the resultant effects of refining on its mechanical properties have been assessed. It was found that refining caused a decrease in fatigue crack growth rates and increases in fatigue strength, fracture toughness, Charpy fracture energy and tensile ductility. Fatigue crack growth rates in region I and in region III were found to be considerably lower in the electroslag refined steel: they were unaffected in region II. The fracture toughness values for the electroslag refined steel are nearly twice those estimated for the unrefined steel. Measurements on heat-treated samples have shown that the electroslag refined steel has a better response to heat-treatment. The improvement in the mechanical properties is explained in terms of the removal of nonmetallic inclusions and a reduction in the sulphur content of the steel.

Effect of electroslag refining on the fracture toughness and fatigue crack propagation rates in heat treated AISI 4340 steel

The AISI 4340 steel has been electroslag refined and the improvement in mechanical properties has been assessed. Electroslag refining (ESR) has improved tensile ductility, plane strain fracture toughness, Charpy fracture energy, and has decreased fatigue crack growth rates. The KIC values for the ESR steel are nearly twice those estimated in the unrefined steel and higher than those obtained in the vacuum arc remelted steel. Fatigue crack growth rates in region I and in region III are found to be decreased considerably in the ESR steel, while they are unaffected in region II. Measurements on heat treated samples have shown that the ESR steel has a better response to heat treatment. Both the suggested heat treatments namely austenitizing at 1140–1470 K as well as the conventional heat treatment of austenitizing at 1140 K have been followed. The improvement in the mechanical properties of ESR steel has been explained on the basis of removal of nonmetallic inclusions and reduction in sulfur content in the steel.

Corrosive and abrasive wear in ore grinding

The relative significance of corrosive and abrasive wear in ore grinding is discussed. Laboratory marked ball wear tests were carried out with magnetic taconite and quartzite under different conditions, namely dry, wet and in the presence of an organic liquid. The effect of different modes of aeration and of pyrrhotite addition on the ball wear using mild steel, high carbon low alloy steel and austenitic stainless steel balls was evaluated. Results indicate that abrasive wear plays a significant role in ore grinding in the absence of sulfides, and rheological properties of the ore slurry influenced such wear. The effect of oxygen on corrosive wear becomes increasingly felt in the presence of a sulfide mineral such as pyrrhotite. Wear characteristics of the three types of ball materials under different grinding conditions are illustrated.

Left-handed helices for DNA: studies on poly[d(I-C)]

Earlier, we showed that, for the D form (n = 8 and h = 3.03 A, where n is number of nucleotide units per turn and h is height per nucleotide unit) of poly[d(A-T)], both right- and left-handed double helical models are stereochemically satisfactory and give good agreement with the observed fiber diffraction data. It was also noted that the conformations of the right- and left-handed D-DNA models are very similar to those of the right- and left-handed B-DNA models. This observation was consistent with the D leads to B transition in the solid phase. As a continuation of our earlier studies, we have carried out similar experiments with poly[d(I-C)]. We could obtain a crystalline D-form pattern (n = 8, h = 3.13 A) of the fiber at 75% relative humidity (r.h.); the hydrated (r.h. approximately equal to 95%) form of the same fiber gave the classical B-form pattern (n = 10, h = 3.40 A). In the present report, we show that both right- and left-handed double-helical models are consistent with the fiber diffraction data of poly[d(I-C)] in the D-form. Theoretical energy calculations also suggest that the right- and left-handed B- and D-DNA models are almost equally stable. Hence, we conclude that the right- and left-handed double-helical models of poly[d(I-C)] in a given form (B or D) are equally likely and that the fiber diffraction data do not permit discrimination.

Distribution of phosphorus and oxygen between liquid steel and basic oxygen steelmaking slag

The efficiency of dephosphorisation is governed by the thermodynamic behaviour of phosphorus and oxygen in molten metal, and P2O5 and FeO in slag. The equilibrium distribution of phosphorus and oxygen, for a wide range of chemical compositions simulating the evolution of slag composition during a typical BOF blow, has been experimentally determined. A mathematical model for estimation of the activity coefficients, as a function of the chemical composition, was also attempted.

Influence of heat treatment on the strength and fracture behaviour of Fe-12Cr-6Al ferritic stainless steel

The changes in the tensile properties and fracture mode brought about by heat treatment of Fe-12Cr-6Al ferritic stainless steel have been studied. A favourable combination of high strength and good ductility is obtained by heating the material at 1370 K for 2 h followed by a water quench. The high-temperature treatment results in carbide dissolution as well as an increase in the grain size. The mechanism of strengthening has been evaluated from the apparent activation energy (28 kJ mol–1) and is identified to be the unpinning of dislocations from the atmosphere of carbon atoms. As the heat-treatment temperature is increased, the fracture behaviour changes from ductile to brittle mode and this is related to the changes in grain size and friction stress.

Some Considerations on the Occurrence of Intergranular Fracture during Fatigue Crack growth in Steels

The occurrence of a maximum in the percentage of intergranular fracture on the fracture surface during the transition from intermediate to low fatigue crack growth rates has been observed for a high strength steel. It is suggested that transgranular planar slip leading to slip localization is essential in promoting intergranular fracture when the cyclic plastic zone size becomes equal to the prior austenite grain size.

Measuring attitudes in translation: a study of Nokia business reports

Background Contemporary Finnish, spoken and written, reveals loanwords or foreignisms in the form of hybrids: a mixture of Finnish and foreign syllables (alumiinivalua). Sometimes loanwords are inserted into the Finnish sentence in their raw form just as they are found in the source language (pulp, after sales palvelu). Again, sometimes loanwords are calques, which appear Finnish but are spelled and pronounced in an altogether foreign manner (Protomanageri, Promenadi kampuksella). Research Questions What role does Finnish business translation play in the migration of foreignisms into Finnish if we consider translation "as a construct of solutions determined by the ideological constraints and conflicts characterizing the target culture" (Robyns 1992: 212)? What attitudes do the Finns display toward the presence of foreignisms in their language? What socio-economic or ideological conditions (Bassnett 1994: 321) are responsible for these attitudes? Are these conditions dynamic? What tools can be used to measure such attitudes? This dissertation set out to answer these and similar questions. Attitudes are imperialist (where otherness is both denied and transformed), defensive (where otherness is acknowledged, transformed, and vilified), transdiscursive (a neutral attitude to both otherness and transformation), or finally defective (where alien migration is acknowledged and "stimulated") (Robyns 1994: 60). Methodology The research method follows Rose's schema (1984: 8): (a) take an existing theory, (b) develop from it a proposition specific enough to be tested, (c) devise a scheme that tests this proposition, (d) carry through the scheme in practice, (e) draw up results and discuss conclusions in relation to the original theory. In other words, the method attempts an explanation of a Finnish social phenomenon based on systematic analyses of translated evidence (Lewins 1992: 4) whereby what really matters is the logical sequence that connects the empirical data to the initial research questions raised above and, ultimately to its conclusion (Yin 1984: 29). Results This research found that Finnish translators of the Nokia annual reports used a foreignism whenever possible such as komponentin instead of rakenneosa, or investoida instead of sijoittaa, and often without any apparent justification (Pryce 2003: 203-12) more than the translator's personal preference. In the old documents (minutes of meetings of the Board of Directors of Osakeyhtio H. Saastamoinen, Ltd. dated 5 July 1912-1917, a NOPSA booklet (1932), Enzo-Gutzeit-Tornator Oy document (1938), Imatra Steel Oy Annual Report 1964, and Nokia Oy Annual Report 1946), foreignisms under Haugen's (1950: 210-31) Classification #1 occurred an average of 0.6 times, while in the new documents (Nokia 1998 translated Annual Reports) they occurred an average of 6.5 times. That big difference, suggests transdiscursive and defective attitudes in Finnish society toward the other. In the 1850s, Finnish attitudes toward alien persons and cultures were hardened, intolerant and prohibitive because language politics were both nascent and emerging, and Finns adopted a defensive stance (Paloposki 2002: 102 ff) to protect their cultural and national treasures such as language and folklore. Innovation The innovation here is that no prior doctoral level research measured Finnish attitudes toward foreignisms using a business translation approach. This is the first time that Haugen's classification has been modified and applied in target language analysis. It is hoped that this method would be replicated in similar research in the future. Applications For practical applications, researchers with interest in languages, language development, language influences, language ideologies, and power structures that affect national language policies will find this thesis useful, especially the model for collecting, grouping, and analyzing foreignisms that has been demonstrated here. It is intended to document for posterity current attitudes of Finns toward the other as revealed in business translations from 1912-1964, and in 1998. This way, future language researchers would be able to explore a time-line of Finnish language development and attitudes toward the other. Communication firms may also find this research interesting. In future, could the model we adopted be used to analyze literary texts or religious texts for example? Future Trends Though business documents show transdiscursive attitudes, other segments of Finnish society may show defensive or imperialist attitudes. When the ideology of industrialization changes in the future, will Finnish attitudes toward the other change as well? Will it then be possible to use the same kind of analytical tools to measure Finnish attitudes? More broadly, will linguistic change continue in the same direction of transdiscursive attitudes, or will the change slow down or even reverse into xenophobic attitudes? Is this our model culture-specific or can it be used in the context of other cultures? Conclusion There is anger against foreignisms in Finland as newspaper publications and television broadcasts show, but research shows that a majority of Finns consider foreignisms and the languages from which they come as sources of enrichment for Finnish culture (Laitinen 2000, Eurobarometer series 41 of July 1994, 44 of Spring 1996, 50 of Autumn 1998). Ideologies of industrialization and globalization in Finland have facilitated transdiscursive tendencies. When Finland's political ideology was intolerant toward foreign influences in the 1850s because Finland was in the process of consolidating her nascent country and language, attitudes toward the importation of loanwords also became intolerant. Presently, when industrialization and globalization became the dominant ideologies, we see a shift in attitudes toward transdiscursive tendencies. Ideology is usually unseen and too often ignored by translation researchers. However, ideology reveals itself as the most powerful factor affecting language attitudes in a target culture. Key words Finnish, Business Translation, Ideology, Foreignisms, Imperialist Attitudes, Defensive Attitudes, Transdiscursive Attitudes, Defective Attitudes, the Other, Old Documents, New Documents.

Deus vult: Images of crusader violence c. 1095-1100.

This study sets out to provide new information about the interaction between abstract religious ideas and actual acts of violence in the early crusading movement. The sources are asked, whether such a concept as religious violence can be sorted out as an independent or distinguishable source of aggression at the moment of actual bloodshed. The analysis concentrates on the practitioners of sacred violence, crusaders and their mental processing of the use of violence, the concept of the violent act, and the set of values and attitudes defining this concept. The scope of the study, the early crusade movement, covers the period from late 1080 s to the crusader conquest of Jerusalem in 15 July 1099. The research has been carried out by contextual reading of relevant sources. Eyewitness reports will be compared with texts that were produced by ecclesiastics in Europe. Critical reading of the texts reveals both connecting ideas and interesting differences between them. The sources share a positive attitude towards crusading, and have principally been written to propagate the crusade institution and find new recruits. The emphasis of the study is on the interpretation of images: the sources are not asked what really happened in chronological order, but what the crusader understanding of the reality was like. Fictional material can be even more crucial for the understanding of the crusading mentality. Crusader sources from around the turn of the twelfth century accept violent encounters with non-Christians on the grounds of external hostility directed towards the Christian community. The enemies of Christendom can be identified with either non-Christians living outside the Christian society (Muslims), non-Christians living within the Christian society (Jews) or Christian heretics. Western Christians are described as both victims and avengers of the surrounding forces of diabolical evil. Although the ideal of universal Christianity and gradual eradication of the non-Christian is present, the practical means of achieving a united Christendom are not discussed. The objective of crusader violence was thus entirely Christian: the punishment of the wicked and the restoration of Christian morals and the divine order. Meanwhile, the means used to achieve these objectives were not. Given the scarcity of written regulations concerning the use of force in bello, perceptions concerning the practical use of violence were drawn from a multitude of notions comprising an adaptable network of secular and ecclesiastical, pre-Christian and Christian traditions. Though essentially ideological and often religious in character, the early crusader concept of the practise of violence was not exclusively rooted in Christian thought. The main conclusion of the study is that there existed a definable crusader ideology of the use of force by 1100. The crusader image of violence involved several levels of thought. Predominantly, violence indicates a means of achieving higher spiritual rewards; eternal salvation and immortal glory.

Structural Basis of Drug Resistance by Genetic Variants of HIV Type 1 Clade C Protease from India

Using computer modeling of three-dimensional structures and structural information available on the crystal structures of HIV-1 protease, we investigated the structural effects of mutations, in treatment-naive and treatment-exposed individuals from India and postulated mechanisms of resistance in clade C variants. A large number of models (14) have been generated by computational mutation of the available crystal structures of drug bound proteases. Localized energy minimization was carried out in and around the sites of mutation in order to optimize the geometry of interactions present. Most of the mutations result in structural differences at the flap that favors the semiopen state of the enzyme. Some of the mutations were also found to confer resistance by affecting the geometry of the active site. The E35D mutation affects the flap structure in clade B strains and E35N and E35K mutation, seen in our modeled strains, have a more profound effect. Common polymorphisms at positions 36 and 63 in clade C also affected flap structure. Apart from a few other residues Gln-58, Asn-83, Asn-88, and Gln-92 and their interactions are important for the transition from the closed to the open state. Development of protease inhibitors by structure-based design requires investigation of mechanisms operative for clade C to improve the efficacy of therapy.

Inverse Correlation between Vitamin D and C-Reactive Protein in Newborns

Some studies suggested that adequate vitamin D might reduce inflammation in adults. However, little is known about this association in early life. We aimed to determine the relationship between cord blood 25-hydroxyvitamin D (25(OH)D) and C-reactive protein (CRP) in neonates. Cord blood levels of 25(OH)D and CRP were measured in 1491 neonates in Hefei, China. Potential confounders including maternal sociodemographic characteristics, perinatal health status, lifestyle, and birth outcomes were prospectively collected. The average values of cord blood 25(OH)D and CRP were 39.43 nmol/L (SD = 20.35) and 6.71 mg/L (SD = 3.07), respectively. Stratified by 25(OH)D levels, per 10 nmol/L increase in 25(OH)D, CRP decreased by 1.42 mg/L (95% CI: 0.90, 1.95) among neonates with 25(OH)D <25.0 nmol/L, and decreased by 0.49 mg/L (95% CI: 0.17, 0.80) among neonates with 25(OH)D between 25.0 nmol/L and 49.9 nmol/L, after adjusting for potential confounders. However, no significant association between 25(OH)D and CRP was observed among neonates with 25(OH)D ≥50 nmol/L. Cord blood 25(OH)D and CRP levels showed a significant seasonal trend with lower 25(OH)D and higher CRP during winter-spring than summer-autumn. Stratified by season, a significant linear association of 25(OH)D with CRP was observed in neonates born in winter-spring (adjusted β = −0.11, 95% CI: −0.13, −0.10), but not summer-autumn. Among neonates born in winter-spring, neonates with 25(OH)D <25 nmol/L had higher risk of CRP ≥10 mg/L (adjusted OR = 3.06, 95% CI: 2.00, 4.69), compared to neonates with 25(OH)D ≥25 nmol/L. Neonates with vitamin D deficiency had higher risk of exposure to elevated inflammation at birth.

Characterization of alinite cements through X-ray diffraction and mas 29Si NMR studies

Alinite cements have been synthesized using mining and steel plant wastes and pulverized fuel ash (fly ash) as raw materials and a clinkering temperature of 1150°C. The cements possess hydration characteristics comparable to those of portland cements. X-ray diffraction studies on these samples confirm the presence of alinite as the predominant phase. MAS 29Si NMR spectra have been used to distinguish alinite and alite cements. While both show resonances characteristic of Q° type silicate species, the portland cements exhibit three distinct peaks corresponding to three inequivalent SiO4 units present, while alinite shows a single sharp peak corresponding to the unique Si position.