SnO2 nanocrystals synthesized by microwave-assisted hydrothermal method: towards a relationship between structural and optical properties

The exploration of novel synthetic methodologies that control both size and shape of functional nanostructure opens new avenues for the functional application of nanomaterials. Here, we report a new and versatile approach to synthesize SnO2 nanocrystals (rutile-type structure) using microwave-assisted hydrothermal method. Broad peaks in the X-ray diffraction spectra indicate the nanosized nature of the samples which were indexed as a pure cassiterite tetragonal phase. Chemically and physically adsorbed water was estimated by TGA data and FT-Raman spectra to account for a new broad peak around 560 cm(-1) which is related to defective surface modes. In addition, the spherical-like morphology and low dispersed distribution size around 3-5 nm were investigated by HR-TEM and FE-SEM microscopies. Room temperature PL emission presents two broad bands at 438 and 764 nm, indicating the existence of different recombination centers. When the size of the nanospheres decreases, the relative intensity of 513 nm emission increases and the 393 nm one decreases. UV-Visible spectra show substantial changes in the optical absorbance of crystalline SnO2 nanoparticles while the existence of a small tail points out the presence of localized levels inside the forbidden band gap and supplies the necessary condition for the PL emission.

Origens dos empresários da indústria de máquinas e equipamentos em São Paulo, 1870-1900

O objetivo específico deste artigo é identificar as origens dos empresários, como nacionalidade e gênese do capital para o início da atividade, na indústria de máquinas e equipamentos em São Paulo, e a evolução do setor no período de 1870 a 1900. Tentamos identificar os empreendimentos na indústria e sua relação com o comércio importador e exportador, com os fazendeiros de produtos para exportação (principalmente o café), com os imigrantes comerciantes e com os que possuíam algum conhecimento técnico.

Analysis of human body kinematics using a hybrid markerless video acquisition and processing

A main objective of the human movement analysis is the quantitative description of joint kinematics and kinetics. This information may have great possibility to address clinical problems both in orthopaedics and motor rehabilitation. Previous studies have shown that the assessment of kinematics and kinetics from stereophotogrammetric data necessitates a setup phase, special equipment and expertise to operate. Besides, this procedure may cause feeling of uneasiness on the subjects and may hinder with their walking. The general aim of this thesis is the implementation and evaluation of new 2D markerless techniques, in order to contribute to the development of an alternative technique to the traditional stereophotogrammetric techniques. At first, the focus of the study has been the estimation of the ankle-foot complex kinematics during stance phase of the gait. Two particular cases were considered: subjects barefoot and subjects wearing ankle socks. The use of socks was investigated in view of the development of the hybrid method proposed in this work. Different algorithms were analyzed, evaluated and implemented in order to have a 2D markerless solution to estimate the kinematics for both cases. The validation of the proposed technique was done with a traditional stereophotogrammetric system. The implementation of the technique leads towards an easy to configure (and more comfortable for the subject) alternative to the traditional stereophotogrammetric system. Then, the abovementioned technique has been improved so that the measurement of knee flexion/extension could be done with a 2D markerless technique. The main changes on the implementation were on occlusion handling and background segmentation. With the additional constraints, the proposed technique was applied to the estimation of knee flexion/extension and compared with a traditional stereophotogrammetric system. Results showed that the knee flexion/extension estimation from traditional stereophotogrammetric system and the proposed markerless system were highly comparable, making the latter a potential alternative for clinical use. A contribution has also been given in the estimation of lower limb kinematics of the children with cerebral palsy (CP). For this purpose, a hybrid technique, which uses high-cut underwear and ankle socks as “segmental markers” in combination with a markerless methodology, was proposed. The proposed hybrid technique is different than the abovementioned markerless technique in terms of the algorithm chosen. Results showed that the proposed hybrid technique can become a simple and low-cost alternative to the traditional stereophotogrammetric systems.

Design, synthesis and application of ultrastable rylene dyes for fluorescent labeling of biomolecules

Studies of organic fluorescent dyes are experiencing a renaissance related to the increasing demands posed by new microscopy techniques for high resolution and high sensitivity. While in the last decade single molecule equipment and methodology has significantly advanced and in some cases reached theoretical limits (e.g. detectors approaching unity quantum yields) unstable emission from chromophores and photobleaching become more and more the bottleneck of the advancement and spreading of single-molecule fluorescence studies. The main goal of this work was the synthesis of fluorophores that are water-soluble, highly fluorescent in an aqueous environment, have a reactive group for attachment to a biomolecule and posses exceptional photostability. An approach towards highly fluorescent, water-soluble and monofunctional perylene-3,4,9,10-tetracarboxdiimide and terrylene-3,4:11,12-tetra carboxidiimide chromophores was presented. A new synthetic strategy for the desymmetrization of perylenetetracarboximides was elaborated; water-solubility was accomplished by introducing sulfonyl substituents in the phenoxy ring. Two strategies have been followed relying on either non-specific or site specific labeling. For this purpose a series of new water-soluble monofunctional perylene and terrylene dyes, bearing amine or carboxy group were prepared. The reactivity and photophysical properties of these new chromophores were studied in aqueous medium. The most suitable chromophores were further derivatized with amine or thiol reactive groups, suitable for chemical modification of proteins. The performance of the new fluorescent probes was assessed by single molecule enzyme tracking, in this case phospholipase acting on phospholipid supported layers. Phospholipase-1 (PLA-1) was labeled with N-hydroxysuccinimide ester functionalized perylene and terrylene derivatives. The purification of the conjugates was accomplished by novel convenient procedure for the removal of unreacted dye from labeled enzymes, which involves capturing excess dye with a solid support. This novel strategy for purification of bioconjugates allows convenient and fast separation of labeled proteins without the need for performing time consuming chromatographic or electrophoretic purification steps. The outstanding photostability of the dyes and, associated therewith, the extended survival times under strong illumination conditions allow a complete characterization of enzyme action on its natural substrates and even connecting enzyme mobility to catalytic activity. For site-specific attachment of the rylene dyes to proteins the chromophores were functionalized with thioesters or nitrilotriacetic acid groups. This allowed attachment of the emitters to the N-terminus of proteins by native chemical ligation or complexation with His-tagged polypeptides at the N- or C-termini, respectively. The synthesis of a water-soluble perylenebis (dicarboximide) functionalized with a thioester group was presented. This chromophore exhibits an exceptional photostability and a functional unit for site-specific labeling of proteins. The suitability of the fluorophore as a covalent label was demonstrated via native chemical ligation with protein containing N-terminal cystein residue. We exploited also oligohisitidine sequences as recognition elements for site-selective labeling. The synthesis of a new water-soluble perylene chromophore, containing a nitrilotriacetic acid functional group was demonstrated, using solution-phase and solid-phase approaches. This chromophore combines the exceptional photophysical properties of the rylene dyes and a recognition unit for site-specific labeling of proteins. An important feature of the label is the unchanged emission of the dye upon complexation with nickel ions.

"Making Sense of Figures": Statistics, Computing and Information Technologies in Agriculture and Biology in Britain, 1920s-1960s

Throughout the twentieth century statistical methods have increasingly become part of experimental research. In particular, statistics has made quantification processes meaningful in the soft sciences, which had traditionally relied on activities such as collecting and describing diversity rather than timing variation. The thesis explores this change in relation to agriculture and biology, focusing on analysis of variance and experimental design, the statistical methods developed by the mathematician and geneticist Ronald Aylmer Fisher during the 1920s. The role that Fisher’s methods acquired as tools of scientific research, side by side with the laboratory equipment and the field practices adopted by research workers, is here investigated bottom-up, beginning with the computing instruments and the information technologies that were the tools of the trade for statisticians. Four case studies show under several perspectives the interaction of statistics, computing and information technologies, giving on the one hand an overview of the main tools – mechanical calculators, statistical tables, punched and index cards, standardised forms, digital computers – adopted in the period, and on the other pointing out how these tools complemented each other and were instrumental for the development and dissemination of analysis of variance and experimental design. The period considered is the half-century from the early 1920s to the late 1960s, the institutions investigated are Rothamsted Experimental Station and the Galton Laboratory, and the statisticians examined are Ronald Fisher and Frank Yates.

Development of guidelines for microbiological control in microbrewery

Over the past 15 years the Italian brewing scene showed interesting changes, especially with regard to the creation of many breweries with an annual production of less than 10,000 hectoliters. The beers produced by microbreweries are very susceptible to attack by spoilage micro-organisms that cause the deterioration of beer quality characteristics. In addition, most of the microbreweries do not practice heat treatments of stabilization and do not carry out quality checks on the product. The high presence of beer spoilage bacteria is an economic problem for the brewing industry because it can damage the brand and it causes high costs of product retrieval. This thesis project was aimed to study the management of the production process in the Italian microbreweries within a production less than 10,000 hl. In particular, the annual production, type of plant, yeast management, process management, cleaning and sanitizing of a representative sample of microbreweries were investigated. Furthermore was made a collection of samples in order to identify, with simple methods, what are spoilage bacteria more present in the Italian craft beers. 21% of the beers analysed were positive at the presence of lactic acid bacteria. These analytical data show the importance of understanding what are the weak points of the production process that cause the development of spoilage bacteria. Finally, the thesis examined the actual production of two microbreweries in order to understand the process management that can promote the growth of spoilage bacteria in beer and production plant. The analysis of the data for the two case studies was helpful to understand what are the critical points where the microorganisms are most frequently in contact with the product. The hygiene practices are crucial to ensure the quality of the finished product, especially in the case of non-pasteurized beer.

Optimising care in a Swiss University Emergency Department by implementing a multicentre trauma register (TARN): report on evaluation, costs and benefits of trauma registries

Diagnostic and therapeutic approaches to trauma patients are, depending on experience, equipment and different therapeutic doctrines, subject to wide variations. The ability to compare trauma centres using a standardised trauma register helps to reveal unresolved systemic issues and simplifies the quality management in an Emergency Department (ED).

Trampoline related injuries in children: risk factors and radiographic findings

Background Backyard trampolines are immensely popular among children, but are associated with an increase of trampoline-related injuries. The aim of this study was to evaluate radiographs of children with trampoline related injuries and to determine the risk factors. Methods Between 2003 and 2009, 286 children under the age of 16 with backyard trampoline injuries were included in the study. The number of injuries increased from 13 patients in 2003 to 86 in 2009. The median age of the 286 patients was 7 years (range: 1–15 years). Totally 140 (49%) patients were males, and 146 (51%) females. Medical records and all available diagnostic imaging were reviewed. A questionnaire was sent to the parents to evaluate the circumstances of each injury, the type of trampoline, the protection equipment and the experience of the children using the trampoline. The study was approved by the Institutional Ethics Committee of the University Hospital of Bern. Results The questionnaires and radiographs of the 104 patients were available for evaluation. A fracture was sustained in 51 of the 104 patients. More than 75% of all patients sustaining injuries and in 90% of patients with fractures were jumping on the trampoline with other children at the time of the accident. The most common fractures were supracondylar humeral fractures (29%) and forearm fractures (25%). Fractures of the proximal tibia occurred especially in younger children between 2–5 years of age. Conclusions Children younger than 5 years old are at risk for specific proximal tibia fractures (“Trampoline Fracture”). A child jumping simultaneously with other children has a higher risk of suffering from a fracture.

Addressing Obesity: Fear of Crime, Perceptions of Disorder and Disaparities in Child and Adolescent Use of Public Parks

Abstract The objectives of this study were: 1) To determine factors which inhibit and facilitate child and adolescent use of outdoor spaces for healthy physical activity by race and ethnicity in four Houston communities and 2) To propose guidelines for encouraging and maintaining child and adolescent outdoor physical activity. Using local health data and Houston Police Department crime statistics, four communities were identified for the study that had the highest concentration of crime and the racial/ ethnic groups of interest. The researchers then identified public parks in the communities. At least two parks were observed in each of the four communities from 2010 to 2011 during spring, summer, fall and winter. The parks were observed for use by children and adolescents and to describe the condition of the park spaces. The communities were Alief (Asian), Sunnyside (Black), Eldridge- West Oaks (White) and Northside- Northline (Hispanic). Observations were made at varying hours of both day and night, weekdays and weekends. Photographs were taken and the condition of the spaces noted in detail. One hundred and twenty persons, 18 years and over, using the spaces or otherwise in these communities were conveniently sampled and interviewed about their health and the extent to which they, or any children or adolescents under their care, used the outdoor spaces of interest. Data were analyzed qualitatively and with basic descriptive statistics. The photographs, journal notes and observation notes of all investigators and key personnel were analyzed. Interview data were also coded to identify patterns and themes in the responses. The findings indicate disparities in the quality and quantity of park equipment and the maintenance of the areas. Where perceptions of disorder were described, there was often visible evidence to support the perceptions. In many cases, residents' perceptions of crime were corroborated by police data. While interview reports did not seem to support the expectation that the condition of the parks was a significant deterrent to their use by children and adolescents, the condition of the parks might be said to limit the extent of that use. Specific reports of disorder that inhibited use included hearing gunfire, seeing drug dependent homeless persons and/or suspected prostitutes in an area.

Loss on ignition as a method for estimating organic and carbonate content in sediments: reproducibility and comparability of results

Five test runs were performed to assess possible bias when performing the loss on ignition (LOI) method to estimate organic matter and carbonate content of lake sediments. An accurate and stable weight loss was achieved after 2 h of burning pure CaCO3 at 950 °C, whereas LOI of pure graphite at 530 °C showed a direct relation to sample size and exposure time, with only 40-70% of the possible weight loss reached after 2 h of exposure and smaller samples losing weight faster than larger ones. Experiments with a standardised lake sediment revealed a strong initial weight loss at 550 °C, but samples continued to lose weight at a slow rate at exposure of up to 64 h, which was likely the effect of loss of volatile salts, structural water of clay minerals or metal oxides, or of inorganic carbon after the initial burning of organic matter. A further test-run revealed that at 550 °C samples in the centre of the furnace lost more weight than marginal samples. At 950 °C this pattern was still apparent but the differences became negligible. Again, LOI was dependent on sample size. An analytical LOI quality control experiment including ten different laboratories was carried out using each laboratory's own LOI procedure as well as a standardised LOI procedure to analyse three different sediments. The range of LOI values between laboratories measured at 550 °C was generally larger when each laboratory used its own method than when using the standard method. This was similar for 950 °C, although the range of values tended to be smaller. The within-laboratory range of LOI measurements for a given sediment was generally small. Comparisons of the results of the individual and the standardised method suggest that there is a laboratory-specific pattern in the results, probably due to differences in laboratory equipment and/or handling that could not be eliminated by standardising the LOI procedure. Factors such as sample size, exposure time, position of samples in the furnace and the laboratory measuring affected LOI results, with LOI at 550 °C being more susceptible to these factors than LOI at 950 °C. We, therefore, recommend analysts to be consistent in the LOI method used in relation to the ignition temperatures, exposure times, and the sample size and to include information on these three parameters when referring to the method.

PROTECTION FOR THE "TURNAROUND WORKER"

This document characterizes the types and magnitude of exposures to toxic substances faced by various turnaround workers in the petroleum industry. The safety and health professional is acquainted with the basic petroleum refinery, refinery equipment and causes for scheduled or emergency turnarounds. Common work procedures during the turnaround are discussed with emphasis on performing the job safely and without adverse consequence to worker health. A listing of commonly encountered substances with a corresponding summary of recognized exposure limits, recommended personal protection, hygiene measures and hazard information is provided to equip the safety and health professional with a ready checklist for worker protection.^ The use of this document was tested and found to improve the average prescription of work procedures and equipment from 38% appropriate (prior to receipt of information) to 84% appropriate (post receipt of information). All participants statistically improved their ability to protect the health and safety of the turnaround worker. ^

Strategy and Circumstance: the Response of American Firms to Japanese Competition in Semiconductors, 1980-1995

The transistor was an American invention, and American firms led the world in semiconductor production and innovation for the first three decades of that industry's existence. In the 1980s, however, Japanese producers began to challenge American dominance. Shrill cries arose from the literature of public policy, warning that the American semiconductor industry would soon share the fate of the lamented American consumer electronics business. Few dissented from the implications: the only hope for salvation would be to adopt Japanese-style public policies and imitate the kinds of capabilities Japanese firms possessed. But the predicted extinction never occurred. Instead, American firms surged back during the 1990s, and it now seems the Japanese who are embattled. This striking American turnaround has gone largely unremarked upon in the public policy literature. And even scholarship in strategic management, which thrives on stories of success instead of stories of failure, has been comparatively silent. Drawing on a more thorough economic history of the worldwide semiconductor industry (Langlois and Steinmueller 1999), this essay attempts to collect some of the lessons for strategy research of the American resurgence. We argue that, although some of the American response did consist in changing or augmenting capabilities, most of the renewed American success is in fact the result not of imitating superior Japanese capabilities but rather of taking good advantage of a set of capabilities developed in the heyday of American dominance. Serendipity played at least as important a role as did strategy.

The impact of communication and cultural diversity in utilizing dental services among Saudi Arabian students in U.S.A.

Objectives: The purpose of this study is to understand the perceived effects of patient-dental staff communication and cultural diversity on the utilization of dental services in the U.S. by Saudi Arabian students who live in the U.S. and enrolled into the King Abdullah Scholarship program. Methods: The study design was an analytical cross-sectional study. Data for this study was obtained from the Saudi Dental Servicers Utilization Survey, a voluntary internet survey available online for one month through Facebook. Ordered logistic regression analyses and multinomial logistic regression analyses were used to measure the relationships between patient-dental staff communication and cultural diversity on the utilization of dental services. Results: Eight hundred and forty-seven responses were analyzed for this study. Overall, the majority of Saudi students reported having excellent communication experience with dental providers in the U.S. More than 58% of respondents reported at least one regular dental visit last year. Factors that influenced the use of regular dental care were: dentist's explanation of treatment plan, response of dental staff to patient's needs, respectful and polite dental staff, dental staff kindness, availability of up-to-date equipment, and overall communication with dentist. However, the utilization of emergency dental care was not associated with any measurement of patient-dental provider communication. Overall future utilization of dental care is associated with all aspects of patient-dental staff communication measured in this survey. Furthermore, more utilization of regular dental care was related to respondent's perception of the importance of trustworthiness dental staff and the importance of a dentist's reputation was only marginally associated. Respondent's perception of dentist's reputation was associated with more use of emergency dental services. Respondents are more likely to anticipate using dental care in the future if they perceived trustworthiness dental staff, and the dentist's reputation as influencing factors to their usage of dental services. Conclusions: Patient-dental staff communication was partially associated with utilization of regular dental care, not associated with utilization of emergency dental care, and broadly associated with anticipated future utilization of dental care. In addition, trustworthy dental staff, and a dentist's reputation were considered to be strong influencing factors towards utilization of dental services.^

The Effect of Product Classifications on the Formulation of Export Unit Value Indices: A Comparison of Export Unit Value Indices based on SITC and HS

With the globalization of economic activity, the relative weight of foreign trade in national economic activities has increased, and the question of how to measure trends in the value and quantity of international trade has become an important issue for policy-makers and economists. This paper compares the chain-linked indices formulated by Masato Kuroko, based on HS this fiscal year for individual industry categories and countries with chain-linked indices based on SITC-R1 codes, in order to study how changes in the quality composition of the same products, which cannot be considered using unit value indices based on SITC-R1 codes, can be considered using unit value indices based on the more detailed HS product classifications.