DFM(A)- aspects for a microwave waveguide ring resonator design

In this research manufacturability analysis is made for an E-plane waveguide ring resonator. About the electrical characteristics of the waveguide ring resonator is discussed. Possibilities to utilize concurrent engineering method both for designing and making manufacturability analysis for MW- and RF-components are discussed. For helping to establish the necessary guidelines for easy manufacturing and assembly of the waveguide ring resonator a specialised DFM(A)-questionnaire is generated. The questionnaire gives also new information for collaborative designing approach in MW-/RF- engineering. The advantages and disadvantages of the concurrent engineering design method are evaluated in the research.

DFM(A)- aspects for a horn antenna design

In this paper aspects of design for manufacturability and assembly (DFMA) are applied to the design of coaxially fed standard gain horn antenna for 1.70 - 2.60 GHz. Possibilities to utilize cross-technological approach method is examined. Methods of DFMA for laser processing are covered and practical design guides and methods are developed. Antenna construction for easy manufacturing and specialized performance is shown. Required dimensions and tolerances are discussed and suitable materials for laser processing are selected.

DFM(A)- aspects for an sma connector design

In this research, manufacturability analysis is made for an SMA connector. Analysis and aspects of applying virtual prototyping for an SMA connector design and manufacturing are also investigated. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) –aspects of products. The aspects of easy manufacturing for machining the SMA connector are collected. Material selection is discussed, and manufacturing stages of prototype manufacturing are presented. The main focus of this research is on prototype manufacturing, but also aspects considering volume production are discussed. A special purpose SMA connector is designed for printed circuit board edge mounting.

DFM/DFMA(A) – analysis and aspects of applying systematic engineering for a microwave testfixture design

In this paper, manufacturability analysis and collection of design aspects is made for a microwave test-fixture. Aspects of applying systematic design for a microwave test-fixture design and manufacturing are also analysed. Special questionnaires for the component and machining are made in order to enable necessary information to ensure DFM(A) – aspects of the component. The aspects of easy manufacturing for machining the microwave test-fixture are collected. Material selection is discussed and manufacturing stages of prototype manufacturing are presented.

Pathétique Sonata : a study of musical aspects in subjection of aesthetic aims

This study makes an attempt to capture some of the aesthetic ideas prospering in the latter half of the eighteenth century and investigates in what way these are possibly being manifested in different musical aspects in Beethoven's early work, and most specifically in his eight sonata, often referred to as the Pathétique sonata. Beginning the first chapter with an introduction to aesthetic notions in Beethoven's age, the second chapter is mostly concerned with anecdotes regarding the Pathétique sonata. Further the third chapter exhibits possible influences between Cherubini, Beethoven and Wagner, and the last three chapters treat different musical and aesthetic aspects like Beethoven's relation to the C minor tonality, the German Sturm und Drang movement, and finally some parallels that can be found between literature and music.

O impacto do crômio nos sistemas biológicos

The impact of biological chromium's activity may be beneficial or not. This review presents the most relevant chemical aspects of these "two faces" of chromium by covering first, the efforts toward a clearer understanding of the carcinogenic properties of chromium compounds. The biomimetic chemistry of Cr(V) complexes illustrates the interactions of the intermediates formed by Cr(VI) reduction with DNA or oligonucleotides. The importance of trivalent chromium as an essential element is also emphasized by summarizing the recent results of the investigations on trinuclear chromium complexes as models of the cofactor responsible for the insulin activity, as well as good candidates for new nutritional supplements.

Counteracting incentive sensitization in severe alcohol dependence using deep brain stimulation of the nucleus accumbens: clinical and basic science aspects

The ventral striatum / nucleus accumbens has been implicated in the craving for drugs and alcohol which is a major reason for relapse of addicted people. Craving might be induced by drug-related cues. This suggests that disruption of craving-related neural activity in the nucleus accumbens may significantly reduce craving in alcohol-dependent patients. Here we report on preliminary clinical and neurophysiological evidence in three male patients who were treated with high frequency deep brain stimulation of the nucleus accumbens bilaterally. All three had been alcohol dependent for many years, unable to abstain from drinking, and had experienced repeated relapses prior to the stimulation. After the operation, craving was greatly reduced and all three patients were able to abstain from drinking for extended periods of time. Immediately after the operation but prior to connection of the stimulation electrodes to the stimulator, local field potentials were obtained from the externalized cables in two patients while they performed cognitive tasks addressing action monitoring and incentive salience of drug related cues. LFPs in the action monitoring task provided further evidence for a role of the nucleus accumbens in goal-directed behaviors. Importantly, alcohol related cue stimuli in the incentive salience task modulated LFPs even though these cues were presented outside of the attentional focus. This implies that cue-related craving involves the nucleus accumbens and is highly automatic.

Importance of the lipid peroxidation biomarkers and methodological aspects FOR malondialdehyde quantification

Free radicals induce lipid peroxidation, playing an important role in pathological processes. The injury mediated by free radicals can be measured by conjugated dienes, malondialdehyde, 4-hydroxynonenal, and others. However, malondialdehyde has been pointed out as the main product to evaluate lipid peroxidation. Most assays determine malondialdehyde by its reaction with thiobarbituric acid, which can be measured by indirect (spectrometry) and direct methodologies (chromatography). Though there is some controversy among the methodologies, the selective HPLC-based assays provide a more reliable lipid peroxidation measure. This review describes significant aspects about MDA determination, its importance in pathologies and biological samples treatment.

Las habilidades motrices básicas en educación primaria: aspectos de su desarrollo = Key motor skills in primary education: developmental aspects

The physical education curriculum stresses the importance of improving students’ key motor skills. This idea agrees with the contributions of research into motor development concerning the important role these skills play in child development. In order to facilitate this improvement is essential to know the different basic aspects of how these key motor skills evolve as well as the essential factors related to the characteristics and conditions of educational practice

Characterization of the major nutritional components of Caryocar brasiliense fruit pulp by nmr spectroscopy

Pequi (Caryocar brasiliense Camb.), a typical fruit of Brazilian Cerrado, is well known in regional cookery and used in folk medicine to treat various illnesses. Mass spectrometry and chromatographic methods have identified the organic composition of pequi fruit pulp; however, NMR spectroscopy is used for the first time to characterize the nutritional components of organic and aqueous-ethanolic extracts. This spectroscopic technique determined the triacylglycerols in the pequi organic fraction, which is constituted mainly by oleate and palmitate esters, and detected the carbohydrate mixtures as the major components of aqueous and ethanolic fractions, respectively. In this study, presence of phenolic compounds was only evidenced in the ethanolic fraction.

THE ROLE OF NANOMATERIALS IN COSMETICS: NATIONAL AND INTERNATIONAL LEGISLATIVE ASPECTS

Nanotechnology is currently one of the fastest growing scientific fields. The products of this science have become part of our everyday lives. However, to date, regulatory agencies have not yet established a single definition for nanomaterials and nanotechnology. Therefore, each country has its own definitions and legislation to control products containing nanomaterials. Being relatively new materials, there are no long-term studies showing their impact on human health and the environment. Consequently, countries control the amount of nanomaterials present in cosmetics, allowing the end consumer to choose which cosmetic to use, by choosing products with or without nanomaterials. Therefore, the primary objective of this study was to identify the most used nanomaterials in cosmetics and verify whether these formulations are in accordance with the laws in force in the United States, the European Union and Brazil, thereby determining if the cosmetics on the market are in line with the existing laws in these three economic powers. This study is unique and will contribute to furthering the discussion on existing laws pertinent to the use of nanotechnology in cosmetics.

Chemigation with benomyl and fluazinam and their fungicidal effects in soil for white mold control on dry beans

The effectiveness of fungicides in controlling white mold (Sclerotinia sclerotiorum) of dry beans (Phaseolus vulgaris) was evaluated when they were applied through irrigation water directly onto the plants or only to the soil. Two field trials were installed in April 1998 and April 1999 in Viçosa, MG. Trials were conducted as a (2 x 3) + 1 factorial: two fungicides x three application modes + one untreated control. The fungicides were benomyl (1.0 kg a.i. ha-1) and fluazinam (0.5 l a.i. ha-1). The three application modes were: (a) by backpack sprayer (667 l ha-1), (b) by garden watering-cans simulating sprinkler irrigation with 35,000 l ha-1 of water, and (c) by garden watering-cans applying water between the rows and near the soil surface in 35,000 l ha-1 of water. In 1998, fungicides were applied at 43 and 54 days after emergence (DAE); in 1999, at 47 and 61 DAE. Both fungicides were similarly effective on white mold control when applied by either chemigation or backpack sprayer, resulting in yields 21% higher than untreated control. Only fluazinam provided disease control when applications were made only in soil. Chemigation provided white mold control equivalent to that of backpack sprayer in terms of incidence, severity and number of diseased pods. Consequently, yield differences between these application methods were not significant.

Cultural aspects of globalizing university-industry knowledge interaction in China

Previous studies of the local involvement of multinational corporation (MNC) subsidiaries focus on host-country firms and local business partners such as suppliers and customers. The role of host-country universities in the same context of innovation networks is neglected. Furthermore, there are many organizational culture- and knowledge-related differences between universities and companies, and this is likely to pose additional challenges for successful collaboration. Early university-industry (U-I) studies have primarily been limited within a national boundary, being concerned with a single level of culture (i.e., at an organizational level) and one-way knowledge transfer from university to industry. Research on more dynamic knowledge interaction in multinational settings is lacking. This is particularly true in the business context of China. In today’s globalizing and rapidly changing organizations, addressing cultural differences and clashes is an everyday reality, and inter-cultural U-I collaboration is becoming a key asset for gaining global competitiveness. This study deals with Finnish MNC subsidiaries’ research collaboration with Chinese universities. It aims to explore the essence of such U-I collaboration and knowledge interaction, uncovering the deep functioning mechanisms of culture underlying effective collaborative knowledge creation and innovation. The study reviews critically different bodies of literature including knowledge management theories and studies, U-I collaboration and knowledge interaction, and cross-cultural research in terms of organizational knowledge generation and utilization. It adopts a case study strategy with qualitative research methods, and data is collected through in-depth interviews and participant observation. The study presents the following major findings: 1. In the light of a comprehensive analysis of U-I collaboration, an effective matching strategy is proposed, in the assumption that good alignment of knowledge interaction strategies and approaches with their corresponding knowledge type, capability development and research task may greatly enhance the effectiveness of cross-cultural U-I collaboration and knowledge interaction. 2. It is proposed that in the Chinese MNC context more dynamic types of knowledge interaction like knowledge co-creation should be of key concern particularly when dealing simultaneously with multi-disciplinary applied research of human factors and technologies. U-I knowledge interaction, otherwise, pays attention only to the study of one-way technology and knowledge transfer. 3. It is posited that the influence of culture on collaborative knowledge interaction can be studied in a valuable way when knowledge-related variables are simultaneously taken into account. A systematic analysis of the role of knowledge in cross-cultural knowledge interaction could best be approached from multi-aspects of knowledge including not only nature, characteristics and types of knowledge but also the process of knowledge (e.g., intensifications of knowledge interaction). 4. The study demonstrates the significant role of aspects of the host-country culture (e.g., Chinese guanxi) in U-I collaboration and knowledge interaction. This is evident, for instance, in issues related to interpersonal relationships and trust, true interest and the relatedness of the research, mutual commitment and learning, communication intensity and interaction, and awareness of cultural and knowledge-related differences between collaboration partners. Theoretical and practical implications of the findings are suggested and discussed.