A case study on the impact of industrial effluent disposal on the fishery of Amba River estuary, Maharashtra

The impact of waste discharge on fishery resources is a matter of great concern. The accepted norm in all environmental impact assessment studies is to avoid areas of high fishery potential while locating a marine outfall. Contemplating on this aspect a case study was conducted in the Amba River estuary before and after the establishment of a petrochemical complex at Nagothane. The treated wastewater from this complex is released through a subsurface outfall after adopting effective control measures for marine disposal of waste. Experimental trawling was done at five locations covering a distance of 30 km during 1990 to 1991. The catch rate within the estuary varied from 0.6 to 255 kg/h (av 24 kg/h). The trend indicated considerable decrease in fishery potential from the mouth of the estuary (av 64 kg/h) to the upstream location (av 11 kg/h). A total of 49 species of fishes, 16 species of prawns, 7 species of crabs and 1 species of lobster were identified from the collections. Number of species gradually increased from the interior segment at Dharamtar (8) to the outer area near Revas (18). A comparison of the quantitative and qualitative nature of the post outfall and pre outfall data revealed only marginal difference. The study indicates that if necessary precautions are taken to render the waste harmless the marine ecology will hardly be affected.

KNOCK DETECTION ALTERNATIVES FOR PRODUCTION VEHICLES.

A method for the detection of knock using the sparking plug, and a system which allows the basic nature of the signal from the spark plug to be compared directly with that from an accelerometer are described. Results are presented for a range of engine speeds which highlight the problems and benefits of each sensing technique.

KNOCK DETECTION ALTERNATIVES FOR PRODUCTION VEHICLES.

A method for the detection of knock using the sparking plug, and a system which allows the basic nature of the signal from the spark plug to be compared directly with that from an accelerometer are described. Results are presented for a range of engine speeds which highlight the problems and benefits of each sensing technique.

THEORETICAL ROAD DAMAGE DUE TO DYNAMIC TYRE FORCES OF HEAVY VEHICLES. PART 1: DYNAMIC ANALYSIS OF VEHICLES AND ROAD SURFACES.

Theory is presented for simulating the dynamic wheel forces generated by heavy road vehicles and the resulting dynamic response of road surfaces to these loads. Sample calculations are provided and the vehicle simulation is validated with data from full-scale tests. The methods are used in the accompanying paper to simulate the road damage done by a tandem-axle vehicle.

THEORETICAL ROAD DAMAGE DUE TO DYNAMIC TYRE FORCES OF HEAVY VEHICLES. PART 2: SIMULATED DAMAGE CAUSED BY A TANDEM-AXLE VEHICLE.

The literature relating to road surface failure and design is briefly reviewed and the conventional methods for assessing the road damaging effects of dynamic tire forces are examined. A new time domain technique for analyzing dynamic tire forces and four associated road damage criteria are presented. The force criteria are used to examine the road damaging characteristics of a simple tandem-axle vehicle model for a range of speed and road roughness conditions. It is concluded that for the proposed criteria, the theoretical service life of road surfaces that are prone to fatigue failure may be reduced significantly by the dynamic component of wheel forces. The damage done to approximately five per cent of the road surface area during the passage of a theoretical model vehicle at typical highway speeds may be increased by as much as four times.

Investigation of anti-lock braking strategies for heavy goods vehicles

An articulated lorry was instrumented in order to measure its performance in straight-line braking. The trailer was fitted with two interchangeable tandem axle sub-chassis, one with an air suspension and the other with a steel monoleaf four-spring suspension. The brakes were only applied to the trailer axles, which were fitted with anti-lock braking systems (ABS), with the brake torque controlled in response to anticipated locking of the leading axle of the tandem. The vehicle with the air suspension was observed to have significantly better braking performance than the steel suspension, and to generate smaller inter-axle load transfer and smaller vertical dynamic tyre forces. Computer models of the two suspensions were developed, including their brakes and anti-lock systems. The models were found to reproduce most of the important features of the experimental results. It was concluded that the poor braking performance of the steel four-spring suspension was mainly due to interaction between the ABS and inter-axle load transfer effects. The effect of road roughness was investigated and it was found that vehicle stopping distances can increase significantly with increasing road roughness. Two alternative anti-lock braking control strategies were simulated. It was found that independent sensing and actuation of the ABS system on each wheel greatly reduced the difference in stopping distances between the air and steel suspensions. A control strategy based on limiting wheel slip was least susceptible to the effects of road roughness.

Industrial practice in technology planning - Implications for a useful tool catalogue for technology management

A survey on technology planning and its implications for a useful tool catalogue for technology management was conducted. The survey provided a picture of technology planning, across a broad range of company size, manufacturing type and sector. It was concluded from the findings that technology planning is an important business activity across industry sectors and company types, driven increasing competition, market requirements and regulation technology change. The process technology roadmapping was used to support technology strategy and planning and could be useful way of structuring both the use of tools in a company and a tool catalogue.

Recolha de camarões reprodutores vivos da espécie Fenneropenaeus indicus da pesca de arrasto semi-industrial na Baía de Maputo

The collection of wild breeders of the Indian white prawn Fenneropenaeus indicus from two semi-industrial trawlers fishing in Maputo Bay is assessed for the period between August and November 1993. The daily mean catch (12-21 prawns dayˉ¹) increased until October but monthly yields were not significantly different (P>0.05). The monthly mean mortality ranged between 8% and 20% and was similar for males and females. More than 70% of the catch comprised small (grade B1: 20-39 g) and medium size (grade B2: 40-59 g) prawns. While males were exclusively of grade B1 (99%), the females were predominantly of grades B2 and B3 (60-80 g). The collection of larger breeders (grade B4: >80 g) was low and represented only 1% of total catches and a maximum of 3% of females. The net profit of breeders collection increased with size (grade) of prawns, and represented a maximum yield of 114% for grade B3. The added value of live prawns exceeded 450% of the cost to the fisherman, but decreased with size of breeders. It is considered that the semi-industrial trawling fishery operating in Maputo Bay has potential for supplying wild breeders of the Indian white prawn for aquaculture. This activity can also contribute to value adding of part of the catch traditionally destined for human consumption.

Developing a framework for mapping industrial emergence

The industrial landscape is becoming increasingly complex and dynamic, with innovative technologies stimulating the emergence of new industries and business models. This paper presents a preliminary framework for mapping industrial emergence, based on roadmapping principles, in order to understand the nature and characteristics of such phenomena. The focus at this stage is on historical examples of industrial emergence, with the preliminary framework based on observations from 20 'quick scan' maps, one of which is used to illustrate the framework. The learning from these historical cases, combined with further industrial consultation and literature review, will be used to develop practical methods for strategy and policy application. The paper concludes by summarising key learning points and further work needed to achieve these outcomes. © 2009 PICMET.

Roadmapping in industrial companies: Experiences

From its origins in the US electronics sector in the 1970s, technology roadmapping has been adapted (and adopted) widely, for many different innovation, strategy and policy applications. Communication is commonly cited as one of the key benefi ts of roadmapping, particularly in terms of the process that brings different organizational perspectives together, with the roadmap providing a common visual 'language'. There is signifi cant demand for methods that are agile, in the sense of being rapid, flexible and effective to apply, focused on strategic decisions and actions. 'Fast-start' roadmapping workshop techniques enable key stakeholders to address strategic issues efficiently using the visual structure of roadmaps to capture, discuss, prioritize, explore and communicate. This paper presents the learning from a set of five diverse applications of the fast-start approach in the Basque Country, which demonstrate the agility of the technique.

The dynamics of industrial emergence

The need to stimulate, identify and nurture new industries is a prominent challenge in advanced economies. While basic science represents a valuable source of new ideas and opportunities, it can often take decades before this science finally finds application in the market. While numerous studies have to date focused on aspects of industrial evolution, (e.g. innovation, internationalisation, new product introduction, technological lifecycles and emerging technologies), far fewer have focused on technology-based industrial emergence. It is clear that if assistance is to be provided to firms and industrial policymakers attempting to navigate industrial emergence then we need an improved understanding of the characteristics and dynamics of this phenomenon. Accordingly, this paper reviews published work from a range of disparate disciplines - evolutionary theory, social construction of technology (SCOT), complexity science, industrial dynamics and technology management - to identify these dynamics. Through this review we conceptualise industrial emergence as a co-evolutionary process in which nonlinear dynamics operate. Industrial emergence is sensitive to the initial availability of resources and the market applications, with growth dependent on the supply-demand coupling, agents' actions to reduce uncertainty and catalytic events. Through synthesizing these key dynamics we go on to propose a conceptual model for industrial emergence. © 2010 IEEE.