Role of polarisation in automatic target recognition using resonance descriptions

The role of polarisation in late time complex resonance based target identification is investigated numerically for the case of an L-shaped wire. While repeated extraction of the resonances for varying polarisation allows for better signal-to-noise immunity, it is also found that there are preferred polarisations for each complex resonance. The first few of these polarisations are extracted for the sample target.

Automatic message handling for a national counselling service

An automatic email handling system (AutoRouter) was introduced at a national counselling service in Australia. In 2003, counsellors responded to a total of 7421 email messages. Over nine days in early May 2004 the administrator responsible for the management of the manual email counselling service recorded the time spent on managing email messages. The AutoRouter was then introduced. Since the implementation of the AutoRouter the administrator's management role has become redundant, an average of 12 h 5 min per week of staff time has been saved. There have been further savings in supervisor time. Counsellors were taking an average of 6.2 days to respond to email messages (n=4307), with an average delay of 1.2 days from the time counsellors wrote the email to when the email was sent. Thus the response was sent on average 7.4 days after receipt of the original client email message. A significant decrease in response time has been noted since implementation of the AutoRouter, with client responses now taking an average of 5.4 days, a decrease of 2.0 days. Automatic message handling appears to be a promising method of managing the administration of a steadily increasing email counselling service.

Refinement of a cell line based artificial diet for rearing the parasitoid wasp, Trichogramma pretiosum

An artificial diet incorporating insect cells originally developed for Trichogramma australicum Girault (Hymenoptera: Tricho-grammatidae) was successfully used to rear Trichogramm pretiosum Riley (Hymenoptera: Trichogrammatidae). To refine the diet, individual components were removed. Chicken egg yolk and the insect cells were identified as the most important components for T. pretiosum development. Their removal resulted in few pupae and no adults. Removal of Grace's insect medium, a common component of artificial diets, was found to markedly improve the development of T pretiosum, producing 60% larva to pupa transition and 19% pupa to adult transition. There was no significant difference in T pretiosum development on diets in which milk powder, malt powder or infant formula were interchanged, despite differences in nutrient composition. The use of yeast extract resulted in significantly higher survival to the adult stage when compared with yeast hydrolysate enzymatic and a combination of yeast extract and yeast hydrolysate enzymatic. Comparison of four antimicrobial agents showed the antibacterial agent Gentamycin and the antifungal agent Nystatin had the least detrimental effect on T pretiosum development. The use of insect cell line diets has the potential to simplify artificial diet production and significantly reduce T pretiosum production costs in Australia compared to diets using insect hemolymph or the use of natural or factitious hosts. (c) 2005 Elsevier Inc. All rights reserved.

Discussions on grain refinement of magnesium alloys by carbon inoculation

Carbon inoculation has no effect on magnesium alloys that do not contain aluminium. The hypothesis proposed in a recent article [Scripta Materialia 49 (2003) 1129] that segregation of carbon plays a major role in the grain refinement of magnesium alloys by carbon inoculation is inconsistent with many of the observed facts. The Al4C3 or Al-C-O hypothesis, which is supported by experimental observations, is still the most reasonable mechanism proposed to date for the grain refinement of magnesium alloys by carbon inoculation. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Native grain refinement of magnesium alloys

High purity Mg-Al type alloys have a naturally fine grain size compared to commercial purity alloys with the same basic composition. This is referred to as native grain refinement. It is shown that native grain refinement occurs only in magnesium alloys containing aluminium. The mechanism is attributed to the Al4C3 particles existing in these alloys. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Grain refinement efficiency and mechanism of aluminium carbide in Mg-Al alloys

Detailed microscopic examination using optical and electron microscopes suggests that Al4C3, often observed in the central regions of magnesium grains on polished sections, is a potent substrate for primary Mg. Calculations of the crystallographic relationships between magnesium and Al4C3 further support the experimental observations. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model

The edge-to-edge matching model for describing the interfacial crystallographic characteristics between two phases that are related by reproducible orientation relationships has been applied to the typical grain refiners in aluminum alloys. Excellent atomic matching between Al3Ti nucleating substrates, known to be effective nucleation sites for primary Al, and the Al matrix in both close packed directions and close packed planes containing these directions have been identified. The crystallographic features of the grain refiner and the Al matrix are very consistent with the edge-to-edge matching model. For three other typical grain refiners for Al alloys, TiC (when a = 0.4328 nm), TiB2 and AIB(2), the matching only occurs between the close packed directions in both phases and between the second close packed plane of the Al matrix and the second close packed plane of the refiners. According to the model, it is predicted that Al3Ti is a more powerful nucleating substrate for Al alloy than TiC, TiB2 and AlB2. This agrees with the previous experimental results. The present work shows that the edge-to-edge matching model has the potential to be a powerful tool in discovering new and more powerful grain refiners for Al alloys. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Grain refinement of Mg-Al(-Mn) alloys by SiC additions

The addition of SiC particles effectively grain refined a range of Mg-Al alloys. The greatest reductions in grain size were found for the alloys with lower Al contents. The presence of Mg2Si in the microstructure after that SiC addition, and consideration of phase equilibria suggested that the SiC transforms to Al4C3, and this is the actual nucleant. The addition of Mn poisoned the grain refining effect of the SiC addition, probably due to the formation of less potent Al-Mn-carbides. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.