Hot spot formation outside of the fusion-fuel core

An alternative fast-ignition method is proposed involving the formation of a hot spot outside the precompressed fusion-fuel core by a series of shocks driven directly by the light pressure of laser pulses of increasing intensities. It is shown that a hot spot, which can be of different material from that of the fuel core, with temperature similar to 10 keV and density similar to 200 g/cm(2), can be formed. Being an electrically neutral plasma, the hot spot can easily be sent into the fuel core. (c) 2005 American Institute of Physics.

Sustainable livelihoods approach (SLA) as an alternative to poverty alleviation in Nigerian fishing communities : a review

The hardship of poverty bestowed on people has become a problem of horrifying enormity. Which attracts global concern to a steadfast search on the best approach to address the menace and to improve the living standard of people particularly those in the rural areas. These areas equally represent where majority of the fishermen lives. They are found frequently isolated, living along margin of lakes, rivers etc often unheard and unseen in development process. The study reviews the concept of poverty, perception and situation in Nigeria, as well as the past approaches to poverty alleviation. Due to the failure of the past approaches to tackle poverty adequately, the paper outlines a new concept of poverty alleviation-sustainable livelihood. Basically the paper highlights its concept, principles, framework and its application in poverty alleviation projects and general development process with particular reference to the Nigerian rural fishing communities

An assessment of the implementation of alternative income sources for fishermen's wives as a strategy for poverty alleviation under the Kainji Lake Fisheries Promotion Project

Kainji Lake Basin is the first man-made Lake in Nigeria with a surface area of 1270km super(2). Since its creation in 1968 research activities were carried out on biological, socio-economic, hydrological and limnological characteristics of the water body. Extension activities concentrated on the dissemination of proven technologies developed by the Research scientists. Most of the socio-economic and extension activities focused on fishermen as women were regarded as homemakers and their activities concentrated in the home. The situation is even compounded by the Islamic injunction of seclusion. The intervention of NGKLFPP in 1993 has introduced many changes into the research and extension activities directed at the beneficiaries of the project because women were considered as a major stakeholder around the Lake area. The intervention of the project in Kainji Lake in the introduction of alternative income generating activities to women is enumerated in this paper. The intervention has improved the living standard of women and to a certain level reduced poverty among women in the area

Cu2O substrates and epitaxial Cu2O/ZnO thin film hetero-structures for solar energy conversion

Future fossil fuel scarcity and environmental degradation have demonstrated the need for renewable, low-carbon sources of energy to power an increasingly industrialized world. Solar energy with its infinite supply makes it an extraordinary resource that should not go unused. However with current materials, adoption is limited by cost and so a paradigm shift must occur to get everyone on the same page embracing solar technology. Cuprous Oxide (Cu2O) is a promising earth abundant material that can be a great alternative to traditional thin-film photovoltaic materials like CIGS, CdTe, etc. We have prepared Cu2O bulk substrates by the thermal oxidation of copper foils as well Cu2O thin films deposited via plasma-assisted Molecular Beam Epitaxy. From preliminary Hall measurements it was determined that Cu2O would need to be doped extrinsically. This was further confirmed by simulations of ZnO/Cu2O heterojunctions. A cyclic interdependence between, defect concentration, minority carrier lifetime, film thickness, and carrier concentration manifests itself a primary reason for why efficiencies greater than 4% has yet to be realized. Our growth methodology for our thin-film heterostructures allow precise control of the number of defects that incorporate into our film during both equilibrium and nonequilibrium growth. We also report process flow/device design/fabrication techniques in order to create a device. A typical device without any optimizations exhibited open-circuit voltages Voc, values in excess 500mV; nearly 18% greater than previous solid state devices.

Phase control of switching from positive to negative index material in a four-level atomic system

Electric and magnetic responses of the medium to the probe field are analysed in a four-level loop atomic system by taking into account the relative phase of the applied fields. An interesting phenomenon is found: under suitable conditions, a change of the refractive index from positive to negative can occur by modulating the relative phase of the applied fields. Then the medium can be switched from a positive index material to a negative index material in our scheme. In addition, a negative index material can be realized in different frequency regions by adjusting the relative phase. It may give us a convenient way to obtain the desired material with positive or negative index.

An Alternative View of the US Price-Dividend Ratio Dynamics

As a necessary condition for the validity of the present value model, the price-dividend ratio must be stationary. However, significant market episodes seem to provide evidence of prices significantly drifting apart from dividends while other episodes show prices anchoring back to dividends. This paper investigates the stationarity of this ratio in the context of a Markov- switching model à la Hamilton (1989) where an asymmetric speed of adjustment towards a unique attractor is introduced. A three-regime model displays the best regime identification and reveals that the first part of the 90’s boom (1985-1995) and the post-war period are characterized by a stationary state featuring a slow reverting process to a relatively high attractor. Interestingly, the latter part of the 90’s boom (1996-2000), characterized by a growing price-dividend ratio, is entirely attributed to a stationary regime featuring a highly reverting process to the attractor. Finally, the post-Lehman Brothers episode of the subprime crisis can be classified into a temporary nonstationary regime.

Trenngitter - eine Alternative zu den Trichternetzen in der Garnelenfischerei

Experimental fishing trials were conducted in the Elbe Estuary using an experimental 3 m-standard beamtrawl. To avoid the by-catch of fish, a sorting grid was used. The elliptical grid was constructed of 6 mm diameter stainless steel bars with a spacing of 13 mm between the bars and housed in a cylindrical frame of 400 mm diameter. It was installed in the extension piece just in front of the codend angled at 45°, with a fish outlet at the top. A series of 10 tows of 15 minutes duration at a towing speed of 3 kn was done. The catch of the main codend was compared with the catch separated by the sorting grid. This achieved a reduction of 56 % of plaice (Pleuronectes platessa), 75 % of flounder (Platichthys flesus), 99 % of whiting (Merlangius merlangus), 94 % of cod (Gadus morhua) and 49 % of smelt (Osmerus eperlanus) with a mean loss of 43 % of shrimps (Crangon crangon). English grid trials in the Humber estuary using a flapper set or guiding funnel in front of the sorting grid device demonstrated reasonable lower escapement rates for fish and shrimps.

Material berritzaile eta originalaren sorkuntza matematika lantzeko

Matematikaren ikaskuntza-irakaskuntza prozesuaren elementu nabarmen bat erabiltzen diren material eta baliabideak dira, eta horien artean unitate didaktikoak eta proiektuak. Era askotakoak daude, baina gehienak zaharkiturik daude eta ez dute ikasleen interesa eta motibazioa pizten. Umeen errealitatea, gustuak eta nahiak, eduki, kolore eta jolasekin erlazionaturik dagoen proiektu original eta berritzailea sortzea izan da lan honen helburua. Ikasleak era aktiboan barneratuko dituzte edukiak eta praktikara eraman ahal izango dituzte, ikasketa esanguratsua eta parte hartzailea bultzatuz. Horrek guztiak haurren egunerokotasuna eta interesak barne hartzen dituen proiektu honetan eragina du, emaitza positiboak jasotzerako orduan, eta beraz, ikasleen aldetik, harrera ezin hobea eskaintzen du.

Evaluation of two alternative carbon capture and storage technologies

4 p.

Alternative trajectories for decarbonizing urban transportation

4 p.

Precipitation of nanocrystals in glasses by electron irradiation: An alternative path to form glass ceramics?

This letter demonstrates an alternative method to form gallium silicate glass ceramics using high-energy electron irradiation. Compared with glass ceramics obtained from the conventional thermal treatment method, the distribution and crystal sizes of the precipitated Ga2O3 nanoparticles are the same. An advantage of this method is that the spatial distribution of the precipitated nanoparticles can be easily controlled. However, optically active dopants Ni2+ ions do not participate in the precipitation during electron irradiation. (c) 2007 American Institute of Physics.

Extracting material response from simple mechanical tests on hardening-softening-hardening viscoplastic solids

Compliant foams are usually characterized by a wide range of desirable mechanical properties. These properties include viscoelasticity at different temperatures, energy absorption, recoverability under cyclic loading, impact resistance, and thermal, electrical, acoustic and radiation-resistance. Some foams contain nano-sized features and are used in small-scale devices. This implies that the characteristic dimensions of foams span multiple length scales, rendering modeling their mechanical properties difficult. Continuum mechanics-based models capture some salient experimental features like the linear elastic regime, followed by non-linear plateau stress regime. However, they lack mesostructural physical details. This makes them incapable of accurately predicting local peaks in stress and strain distributions, which significantly affect the deformation paths. Atomistic methods are capable of capturing the physical origins of deformation at smaller scales, but suffer from impractical computational intensity. Capturing deformation at the so-called meso-scale, which is capable of describing the phenomenon at a continuum level, but with some physical insights, requires developing new theoretical approaches.

A fundamental question that motivates the modeling of foams is ‘how to extract the intrinsic material response from simple mechanical test data, such as stress vs. strain response?’ A 3D model was developed to simulate the mechanical response of foam-type materials. The novelty of this model includes unique features such as the hardening-softening-hardening material response, strain rate-dependence, and plastically compressible solids with plastic non-normality. Suggestive links from atomistic simulations of foams were borrowed to formulate a physically informed hardening material input function. Motivated by a model that qualitatively captured the response of foam-type vertically aligned carbon nanotube (VACNT) pillars under uniaxial compression [2011,“Analysis of Uniaxial Compression of Vertically Aligned Carbon Nanotubes,” J. Mech.Phys. Solids, 59, pp. 2227–2237, Erratum 60, 1753–1756 (2012)], the property space exploration was advanced to three types of simple mechanical tests: 1) uniaxial compression, 2) uniaxial tension, and 3) nanoindentation with a conical and a flat-punch tip. The simulations attempt to explain some of the salient features in experimental data, like
1) The initial linear elastic response.
2) One or more nonlinear instabilities, yielding, and hardening.

The model-inherent relationships between the material properties and the overall stress-strain behavior were validated against the available experimental data. The material properties include the gradient in stiffness along the height, plastic and elastic compressibility, and hardening. Each of these tests was evaluated in terms of their efficiency in extracting material properties. The uniaxial simulation results proved to be a combination of structural and material influences. Out of all deformation paths, flat-punch indentation proved to be superior since it is the most sensitive in capturing the material properties.