Performance of Gabion Faced Reinforced Earth Retaining Walls

Gabion faced re.taining walls are essentially semi rigid structures that can generally accommodate large lateral and vertical movements without excessive structural distress. Because of this inherent feature, they offer technical and economical advantage over the conventional concrete gravity retaining walls. Although they can be constructed either as gravity type or reinforced soil type, this work mainly deals with gabion faced reinforced earth walls as they are more suitable to larger heights. The main focus of the present investigation was the development of a viable plane strain two dimensional non linear finite element analysis code which can predict the stress - strain behaviour of gabion faced retaining walls - both gravity type and reinforced soil type. The gabion facing, backfill soil, In - situ soil and foundation soil were modelled using 20 four noded isoparametric quadrilateral elements. The confinement provided by the gabion boxes was converted into an induced apparent cohesion as per the membrane correction theory proposed by Henkel and Gilbert (1952). The mesh reinforcement was modelled using 20 two noded linear truss elements. The interactions between the soil and the mesh reinforcement as well as the facing and backfill were modelled using 20 four noded zero thickness line interface elements (Desai et al., 1974) by incorporating the nonlinear hyperbolic formulation for the tangential shear stiffness. The well known hyperbolic formulation by Ouncan and Chang (1970) was used for modelling the non - linearity of the soil matrix. The failure of soil matrix, gabion facing and the interfaces were modelled using Mohr - Coulomb failure criterion. The construction stages were also modelled.Experimental investigations were conducted on small scale model walls (both in field as well as in laboratory) to suggest an alternative fill material for the gabion faced retaining walls. The same were also used to validate the finite element programme developed as a part of the study. The studies were conducted using different types of gabion fill materials. The variation was achieved by placing coarse aggregate and quarry dust in different proportions as layers one above the other or they were mixed together in the required proportions. The deformation of the wall face was measured and the behaviour of the walls with the variation of fill materials was analysed. It was seen that 25% of the fill material in gabions can be replaced by a soft material (any locally available material) without affecting the deformation behaviour to large extents. In circumstances where deformation can be allowed to some extents, even up to 50% replacement with soft material can be possible.The developed finite element code was validated using experimental test results and other published results. Encouraged by the close comparison between the theory and experiments, an extensive and systematic parametric study was conducted, in order to gain a closer understanding of the behaviour of the system. Geometric parameters as well as material parameters were varied to understand their effect on the behaviour of the walls. The final phase of the study consisted of developing a simplified method for the design of gabion faced retaining walls. The design was based on the limit state method considering both the stability and deformation criteria. The design parameters were selected for the system and converted to dimensionless parameters. Thus the procedure for fixing the dimensions of the wall was simplified by eliminating the conventional trial and error procedure. Handy design charts were developed which would prove as a hands - on - tool to the design engineers at site. Economic studies were also conducted to prove the cost effectiveness of the structures with respect to the conventional RCC gravity walls and cost prediction models and cost breakdown ratios were proposed. The studies as a whole are expected to contribute substantially to understand the actual behaviour of gabion faced retaining wall systems with particular reference to the lateral deformations.

Continuum bound states as surface states of a finite periodic system

We discuss the relation between continuum bound states (CBSs) localized on a defect, and surface states of a finite periodic system. We model an experiment of Capasso et al. [F. Capasso, C. Sirtori, J. Faist, D. L. Sivco, S-N. G. Chu, and A. Y. Cho, Nature (London) 358, 565 (1992)] using the transfer-matrix method. We compute the rate for intrasubband transitions from the ground state to the CBS and derive a sum rule. Finally we show how to improve the confinement of a CBS while keeping the energy fixed.

Role of structural saturation and geometry in the luminescence of silicon-based nanostructured materials

The structural saturation and stability, the energy gap, and the density of states of a series of small, silicon-based clusters have been studied by means of the PM3 and some ab initio (HF/6-31G* and 6-311++G**, CIS/6-31G* and MP2/6-31G*) calculations. It is shown that in order to maintain a stable nanometric and tetrahedral silicon crystallite and remove the gap states, the saturation atom or species such as H, F, Cl, OH, O, or N is necessary, and that both the cluster size and the surface species affect the energetic distribution of the density of states. This research suggests that the visible luminescence in the silicon-based nanostructured material essentially arises from the nanometric and crystalline silicon domains but is affected and protected by the surface species, and we have thus linked most of the proposed mechanisms of luminescence for the porous silicon, e.g., the quantum confinement effect due to the cluster size and the effect of Si-based surface complexes.

Optically transparent magnetic nanocomposites based on encapsulated Fe3O4 nanoparticles in a sol–gel silica network

Composite Fe3O4–SiO2 materials were prepared by the sol–gel method with tetraethoxysilane and aqueous-based Fe3O4 ferrofluids as precursors. The monoliths obtained were crack free and showed both optical and magnetic properties. The structural properties were determined by infrared spectroscopy, x-ray diffractometry and transmission electron microscopy. Fe3O4 particles of 20 nm size lie within the pores of the matrix without any strong Si–O–Fe bonding. The well established silica network provides effective confinement to these nanoparticles. The composites were transparent in the 600–800 nm regime and the field dependent magnetization curves suggest that the composite exhibits superparamagnetic characteristics

Fabrication of a quantum well heterostructure based on plasma polymerized aniline and its characterization using STM/STS

Two-dimensional electronic systems play a crucial role in modern electronics and offer a multitude of opportunities to study the fundamental phenomena at low dimensional physics. A quantum well heterostructure based on polyaniline (P) and iodine doped polyaniline (I) thin films were fabricated using radio frequency plasma polymerization on indium tin oxide coated glass plate. Scanning probe microscopy and scanning electron microscopy studies were employed to study the morphology and roughness of the polymer thin films. Local electronic density of states (LDOS) of the P–I–P heterostructures is probed using scanning tunnelling spectroscopy (STS). A step like LDOS is observed in the P–I–P heterostructure and is attributed to the quantum well confinement of electrons in the polymer heterostructure.

Preparation and Study of Optical Properties of CdS, CdS-TiO2 and CdS-Au Nanocomposites for Photonic Applications

Nanophotonics can be regarded as a fusion of nanotechnology and photonics and it is an emerging field providing researchers opportunities in fundamental science and new technologies. In recent times many new methodsand techniques have been developed to prepare materials at nanoscale dimensions. Most of these materials exhibit unique and interesting optical properties and behavior. Many of these have been found to be very useful to develop new devices and systems such as tracers in biological systems, optical limiters, light emitters and energy harvesters. This thesis presents a summary of the work done by the author in the field by choosing a few semiconductor systems to prepare nanomaterials and nanocomposites. Results of the study of linear and nonlinear optical properties of materials thus synthesized are also presented in the various chapters of this thesis. CdS is the material chosen here and the methods and the studies of the detailed investigation are presented in this thesis related to the optical properties of CdS nanoparticles and its composites. Preparation and characterization methods and experimental techniques adopted for the investigations were illustrated in chapter 2 of this thesis. Chapter 3 discusses the preparation of CdS, TiO2 and Au nanoparticles. We observed that the fluorescence behaviour of the CdS nanoparticles, prepared by precipitation technique, depends on excitation wavelength. It was found that the peak emission wavelength can be shifted by as much as 147nm by varyingthe excitation wavelengths and the reason for this phenomenon is the selective excitation of the surface states in the nanoparticles. This provided certain amount of tunability for the emission which results from surface states.TiO2 nanoparticle colloids were prepared by hydrothermal method. The optical absorption study showed a blue shift of absorption edge, indicating quantum confinement effect. The large spectral range investigated allows observing simultaneously direct and indirect band gap optical recombination. The emission studies carried out show four peaks, which are found to be generated from excitonic as well as surface state transitions. It was found that the emission wavelengths of these colloidal nanoparticles and annealed nanoparticles showed two category of surface state emission in addition to the excitonic emission. Au nanoparticles prepared by Turkevich method showed nanoparticles of size below 5nm using plasmonic absorption calculation. It was also found that there was almost no variation in size as the concentration of precursor was changed from 0.2mM to 0.4mM.We have observed SHG from CdS nanostructured thin film prepared onglass substrate by chemical bath deposition technique. The results point out that studied sample has in-plane isotropy. The relative values of tensor components of the second-order susceptibility were determined to be 1, zzz 0.14, xxz and 0.07. zxx These values suggest that the nanocrystals are oriented along the normal direction. However, the origin of such orientation remains unknown at present. Thus CdS is a promising nonlinear optical material for photonic applications, particularly for integrated photonic devices. CdS Au nanocomposite particles were prepared by mixing CdS nanoparticles with Au colloidal nanoparticles. Optical absorption study of these nanoparticles in PVA solution suggests that absorption tail was red shifted compared to CdS nanoparticles. TEM and EDS analysis suggested that the amount of Au nanoparticles present on CdS nanoparticles is very small. Fluorescence emission is unaffected indicating the presence of low level of Au nanoparticles. CdS:Au PVA and CdS PVA nanocomposite films were fabricated and optically characterized. The results showed a red-shift for CdS:Au PVA film for absorption tail compared to CdS PVA film. Nonlinear optical analysis showed a huge nonlinear optical absorption for CdS:Au PVA nanocomposite and CdS:PVA films. Also an enhancement in nonlinear optical absorption is found for CdS:Au PVA thin film compared to the CdS PVA thin film. This enhancement is due to the combined effect of plasmonic as well as excitonic contribution at high input intensity. Samples of CdS doped with TiO2 were also prepared and the linear optical absorption spectra of these nanocompositeparticles clearly indicated the influence of TiO2 nanoparticles. TEM and EDS studies have confirmed the presence of TiO2 on CdS nanoparticles. Fluorescence studies showed that there is an increase in emission peak around 532nm for CdS nanoparticles. Nonlinear optical analysis of CdS:TiO2 PVA nanocomposite films indicated a large nonlinear optical absorption compared to that of CdS:PVA nanocomposite film. The values of nonlinear optical absorption suggests that these nanocomposite particles can be employed for optical limiting applications. CdSe-CdS and CdSe-ZnS core-shell QDs with varying shell size were characterized using UV–VIS spectroscopy. Optical absorption and TEM analysis of these QDs suggested a particle size around 5 nm. It is clearly shown that the surface coating influences the optical properties of QDs in terms of their size. Fluorescence studies reveal the presence of trap states in CdSe-CdS and CdSe- ZnS QDs. Trap states showed an increase as a shell for CdS is introduced and increasing the shell size of CdS beyond a certain value leads to a decrease in the trap state emission. There is no sizeable nonlinear optical absorption observed. In the case of CdSe- ZnS QDs, the trap state emission gets enhanced with the increase in ZnS shell thickness. The enhancement of emission from trap states transition due to the increase in thickness of ZnS shell gives a clear indication of distortion occurring in the spherical symmetry of CdSe quantum dots. Consequently the nonlinear optical absorption of CdSe-ZnS QDs gets increased and the optical limiting threshold is decreased as the shell thickness is increased in respect of CdSe QDs. In comparison with CdSe-CdS QDs, CdSe-ZnS QDs possess much better optical properties and thereby CdSe-ZnS is a strong candidate for nonlinear as well as linear optical applications.

Investigations on TiO2 Based Nanocomposites as Potential Photonic Materials

This Study overviews the basics of TiO2with respect to its structure, properties and applications. A brief account of its structural, electronic and optical properties is provided. Various emerging technological applications utilising TiO2 is also discussed.Till now, exceptionally large number of fundamental studies and application-oriented research and developments has been carried out by many researchers worldwide in TiO2 with its low-dimensional nanomaterial form due to its various novel properties. These nanostructured materials have shown many favourable properties for potential applications, including pollutant photocatalytic decomposition, photovoltaic cells, sensors and so on. This thesis aims to make an in-depth investigation on different linear and nonlinear optical and structural characteristics of different phases of TiO2. Correspondingly, extensive challenges to synthesise different high quality TiO2 nanostructure derivatives such as nanotubes, nanospheres, nanoflowers etc. are continuing. Here, different nanostructures of anatase TiO2 were synthesised and analysed. Morphologically different nanostructures were found to have different impact on their physical and electronic properties such as varied surface area, dissimilar quantum confinement and hence diverged suitability for different applications. In view of the advantages of TiO2, it can act as an excellent matrix for nanoparticle composite films. These composite films may lead to several advantageous functional optical characteristics. Detailed investigations of these kinds of nanocomposites were also performed, only to find that these nanocomposites showed higher adeptness than their parent material. Fine tuning of these parameters helps researchers to achieve high proficiency in their respective applications. These innumerable opportunities aims to encompass the new progress in studies related to TiO2 for an efficient utilization in photo-catalytic or photo-voltaic applications under visible light, accentuate the future trends of TiO2-research in the environment as well as energy related fields serving promising applications benefitting the mankind. The last section of the thesis discusses the applicability of analysed nanomaterials for dye sensitised solar cells followed by future suggestions.

Piezoresistive cantilevers with an integrated bimorph actuator

Scanning Probe Microscopy (SPM) has become of fundamental importance for research in area of micro and nano-technology. The continuous progress in these fields requires ultra sensitive measurements at high speed. The imaging speed limitation of the conventional Tapping Mode SPM is due to the actuation time constant of piezotube feedback loop that keeps the tapping amplitude constant. In order to avoid this limit a deflection sensor and an actuator have to be integrated into the cantilever. In this work has been demonstrated the possibility of realisation of piezoresistive cantilever with an embedded actuator. Piezoresistive detection provides a good alternative to the usual optical laser beam deflection technique. In frames of this thesis has been investigated and modelled the piezoresistive effect in bulk silicon (3D case) for both n- and p-type silicon. Moving towards ultra-sensitive measurements it is necessary to realize ultra-thin piezoresistors, which are well localized to the surface, where the stress magnitude is maximal. New physical effects such as quantum confinement which arise due to the scaling of the piezoresistor thickness was taken into account in order to model the piezoresistive effect and its modification in case of ultra-thin piezoresistor (2D case). The two-dimension character of the electron gas in n-type piezoresistors lead up to decreasing of the piezoresistive coefficients with increasing the degree of electron localisation. Moreover for p-type piezoresistors the predicted values of the piezoresistive coefficients are higher in case of localised holes. Additionally, to the integration of the piezoresistive sensor, actuator integrated into the cantilever is considered as fundamental for realisation of fast SPM imaging. Actuation of the beam is achieved thermally by relying on differences in the coefficients of thermal expansion between aluminum and silicon. In addition the aluminum layer forms the heating micro-resistor, which is able to accept heating impulses with frequency up to one megahertz. Such direct oscillating thermally driven bimorph actuator was studied also with respect to the bimorph actuator efficiency. Higher eigenmodes of the cantilever are used in order to increase the operating frequencies. As a result the scanning speed has been increased due to the decreasing of the actuation time constant. The fundamental limits to force sensitivity that are imposed by piezoresistive deflection sensing technique have been discussed. For imaging in ambient conditions the force sensitivity is limited by the thermo-mechanical cantilever noise. Additional noise sources, connected with the piezoresistive detection are negligible.

Nanocrystalline Ge Flash Memories: Electrical Characterization and Trap Engineering

Conventional floating gate non-volatile memories (NVMs) present critical issues for device scalability beyond the sub-90 nm node, such as gate length and tunnel oxide thickness reduction. Nanocrystalline germanium (nc-Ge) quantum dot flash memories are fully CMOS compatible technology based on discrete isolated charge storage nodules which have the potential of pushing further the scalability of conventional NVMs. Quantum dot memories offer lower operating voltages as compared to conventional floating-gate (FG) Flash memories due to thinner tunnel dielectrics which allow higher tunneling probabilities. The isolated charge nodules suppress charge loss through lateral paths, thereby achieving a superior charge retention time. Despite the considerable amount of efforts devoted to the study of nanocrystal Flash memories, the charge storage mechanism remains obscure. Interfacial defects of the nanocrystals seem to play a role in charge storage in recent studies, although storage in the nanocrystal conduction band by quantum confinement has been reported earlier. In this work, a single transistor memory structure with threshold voltage shift, Vth, exceeding ~1.5 V corresponding to interface charge trapping in nc-Ge, operating at 0.96 MV/cm, is presented. The trapping effect is eliminated when nc-Ge is synthesized in forming gas thus excluding the possibility of quantum confinement and Coulomb blockade effects. Through discharging kinetics, the model of deep level trap charge storage is confirmed. The trap energy level is dependent on the matrix which confines the nc-Ge.

Prevalencia de los síntomas otorrinolaringológicos y factores asociados en los trabajadores de una central de llamadas en la ciudad de Bogotá Colombia

La industria de las centrales de llamadas es uno de los sectores de más rápido crecimiento en el mundo desarrollado, gracias a los avances tecnológicos han permitido su uso cada vez más generalizado desarrollando servicios integrales que son accesibles las 24 horas del día. Los operadores telefónicos o tele-operadores de esta industria se ven enfrentados a jornadas laborales en las que se exponen al uso constante de la voz, utilización permanente de auriculares de comunicación, confinamiento en estaciones de trabajo delimitadas pero no aisladas; aumentando así la prevalencia de síntomas como los otorrinolaringológicos. Este estudio tiene como objeto identificar la prevalencia de síntomas otorrinolaringológicos dados por alteraciones de la voz, compromiso auditivo y síntomas de la vía respiratoria superior durante la jornada laboral de los trabajadores de una central de llamadas de una prestigiosa empresa aseguradora de la ciudad de Bogotá Colombia, así como también identificar la asociación de factores demográficos organizacionales y biológicos con los síntomas otorrinolaringológicos y analizar el medio ambiente laboral de dicha empresa y la relación de los síntomas otorrinolaringológicos con mediciones de ruido, temperatura y humedad. La población estudiada fue de 81 tele operadores de los cuales 61 (75.3%) fueron mujeres, se evidencio que las enfermedades respiratorias altas tienen una prevalencia del 36%, también se reporto una prevalencia del 85% (69) tele operadores reportaron por lo menos un síntoma de voz y solo 12 tele operadores 15% no reportaron ningún síntoma. En cuanto a la hipoacusia solo 5 (6.2%) reportaron disminución de la agudeza auditiva

Análisis del sistema de administración de penas y castigos en Colombia. Un estudio del establecimiento carcelario Modelo de Bogotá. Desde la obra Vigilar y Castigar. 2000-2005

El interés del presente estudio consiste en analizar el tema del sistema de administración de penas y castigos colombiano, entre 2000 y 2005; a la luz de los planteamientos de Michel Foucault, en su obra Vigilar y Castigar; en lo concerniente al encierro como castigo y los elementos que se pueden desprenden: saber, disciplina, resistencia. Mediante una conjunta contextualización histórica y conceptual; se va haciendo una caracterización del funcionamiento, estructura, misión, objetivo etc.; de la prisión que en términos generales es similar; es decir, aunque haya avances teóricos, tecnológicos y científicos, a través del tiempo emergerán saberes sometidos que se instauran muchas veces, como medio de sobrevivencia. Comprobando que efectivamente sí, se fundamentan saberes locales, en una sociedad de control tan reprimida como la Cárcel Modelo de Bogotá.

La migración y los nuevos retos para el Estado-nación: relativismo ético y de identidad

Existe una fuerte preocupación por parte de los Estados acerca de la cuestión migratoria. En tanto en que ésta se convierte de una fuerza generadora de transformaciones sociales, políticas y económicas, también representan un reto para el Estado tradicional que bajo contextos democráticos no favorece sin embargo institucionalmente la implantación de modelos más pluralistas que favorezcan la inclusión de los migrantes bajo ciertas condiciones. La dificultad de implementar estos modelos radica no sólo en los posibles resultados de las nuevas relaciones que se generan, sino también en la combinación sistemática de hábitos y estructuras sociales que generan una cultura, siendo el significado simbólico de la identidad —pública y privada— la que da sentido al proceso adaptativo y asimilatorio de esos migrantes. Por lo que la migración ha tenido un efecto bipolar, por una parte favorece la propiciación de flexibilidad institucional que favorezca un sistema más plural en sentido político, por parte de los estados, pero también ha impulsado la idea de que existen identidades colectivas ajenas a lo nacional, que ponen en riesgo la cohesión social dentro de un Estado-nación.-----There is a deep concern of the Governments with respect to the migration issue. While it is moving from being a force generating social, political, and economical transformations, it also represents a challenge to the traditional State which despite its democratic framework, it however does not institutionally favor the implementation of more pluralist models which promote the inclusion of migrants under certain conditions. The obstacle to implementing these models lies not only on the potential results of the new relationships created, but also on the consistent blend of customs and social structures which generate a culture, being the symbolic meaning of the –public and private– identity which provides a purpose to the adaptation and assimilatory process of those migrants. Due to the bipolar effect of the migration, on the one hand it favors the promotion of an institutional flexibility which fosters a more politically plural system on the States’ side, and on the other hand it has boosted the notion of the existence of collective identities alien to nation-wide matters, which compromise the social consistency within a nation-state.

Ecological analysis of periphytic diatoms in Mediterranean coastal wetlands (Empordà wetlands, NE Spain)

S'han estudiat els efectes dels factors ambientals sobre el perífiton dels sistemes lenític fluctuants del aiguamolls de l'Empordà. L'estudi s'ha realitzat als tres nivells d'integració: nivell d'ecosistema considerant el rol del perífiton envers els altres productors primaris; a nivell de comunitat, estudiant la composició específica de les diatomees i a nivell de població estudiant la plasticitat fenotípica d'una espècie de diatomea (Nitzschia frustulum). A nivell d'ecosistema s'observa que els factors que afavoreixen el predomini dels diferents tipus de productors primaris (perífiton, fitoplàncton i macròfits) són la renovació i el grau d'eutròfia de l'aigua. A nivell de comunitat els factors determinants en la composició i distribució de les espècies de diatomees són els gradients confinament-inundació així com la productivitat del sistema. En funció d'aquest factors s'han establert 5 associacions de diatomees. A nivell de població es demostra que tant la salinitat, com la relació N : P a l'aigua com el moviment de l'aigua afecten la morfologia i ultraestructura de la valva de N. frustulum. De forma interessant s'observa que la salinitat, considerada com a factor individual, afecta N. frustulum a nivell poblacional provocant-li modificacions en la morfologia de la valva, per en canvi, no afecta a nivell de comunitat, ja que totes les espècies de diatomees presents en ambients de salinitat fluctuant són eurihalines.

Estructura i dinàmica del sistema bentònic en llacunes costaneres dels aiguamolls de l'Empordà

S'ha estudiat l'estructura i dinàmica del sistema bentònic de llacunes costaneres de la maresma dels aiguamolls de l'Empordà (NE de la península Ibèrica) i els factors que les determinen. Amb aquesta finalitat es van prendre mostres d'organismes del bentos (mensualment), nutrients i pigments de l'aigua (setmanalment) i el sediment (mensualment), així com paràmetres físics de l'aigua (setmanalment), durant dos cicles d'inundació (1997-1998 i 1998-1999). En aquesta maresma els factors determinants per als organismes bentònics i el contingut en nutrients del sediment són principalment físics: el grau de permanència de l'aigua, el confinament i la granulometria. De manera que els factors tròfics tenen menys pes que els físics tal com es posa de manifest amb les associacions de nematodes. El règim hídric de les llacunes integra des del grau de permanència de l'aigua fins a la salinitat i el confinament, per la qual cosa a partir de la caracterització dels diferents tipus de règim hídric es poden discriminar les tres tipologies d'ambients amb comunitats bentòniques diferenciades en l'estructura, la composició i la dinàmica temporal. Així, les tres comunitats diferenciades són: (1) la d'aigües permanents caracteritzada per una riquesa i diversitat elevades i constants en el temps, i per un nombre més elevat de tàxons sense adaptacions per passar situacions adverses; (2) la d'aigües semipermanents i temporànies d'inundació pulsativa, caracteritzada per una menor riquesa i diversitat, i per la dominància d'organismes amb estructures de resistència per passar la fase seca i aguantar condicions desfavorables, i (3) la d'aigües temporànies d'inundació continuada, caracteritzada per una major variabilitat de la riquesa i diversitat al llarg del cicle i per una singularitat taxonòmica més elevada, ja que s'observen cladòcers i una major representació taxonòmica dels insectes. Durant la realització d'aquest estudi els dos cicles d'inundació van suposar entrades d'aigua en el sistema diferents, per això es va diferenciar un cicle humit (1997-1998) i un de sec (1998-1999). En relació amb la major importància de les entrades d'aigua en el sistema, es va observar un contingut en nutrients de l'aigua significativament superior durant el cicle humit. Pel que fa al sediment, la seva major inèrcia explicaria la manca de diferències significatives en el contingut en nutrients del sediment del cicle humit i del sec. Ara bé, sí que s'observa diferència en la composició d'organismes. Així, la variabilitat interanual en l'estructura de la comunitat bentònica de la maresma es pot atribuir a una situació d'estrès provocada pel cicle sec. Aquesta situació va comportar un augment de la diversitat per disminució de la dominància a totes les llacunes estudiades, determinada, en gran manera, per la disminució de l'abundància original de poblacions dominants i característiques d'ambients permanents, Corophium orientale, o temporànies, Gammarus aequicauda. No existeix un patró estacional en les comunitats estudiades, sinó que els principals canvis en el plàncton i el bentos són deguts a pertorbacions hídriques. Aquestes pertorbacions provoquen que s'estableixi una situació en què dominen uns tàxons característics en el plàncton (Synchaeta i Eutintinnus) i, en canvi, que en el bentos es perdi l'estructura pròpia de les comunitats característiques dels diferents ambients (comunitats dominades per Corophium orinetale en aigües permanents i per Chironomus salinarius en temporànies). La severitat és diferent en funció del grau de permanència de l'aigua, i és més alta en ambients permanents i més baixa en els temporanis. La major severitat en ambients permanents ve determinada per la menor adaptació del bentos d'aigües permanents a les fluctuacions ambientals i a l'efecte de la predació sobre el plàncton. A més, tant en el bentos com en el plàncton es donen fenòmens d'histèresi, segons els quals l'efecte de la pertorbació no solament depèn de la causa pertorbadora sinó també de l'estat en què es troba la comunitat en el moment de la pertorbació.

Zooplankton structure and dynamics in Mediterranean marshes (Empordà Wetlands): a size-based approach

Zooplankton community structure (composition, diversity, dynamics and trophic relationships) of Mediterranian marshes, has been analysed by means of a size based approach. In temporary basins the shape of the biomass-size spectra is related to the hydrological cycle. Linear shape spectra are more frequent in flooding situations when nutrient input causes population growth of small-sized organisms, more than compensating for the effect of competitive interactions. During confinement conditions the scarcity of food would decrease zooplankton growth and increase intra- and interspecific interactions between zooplankton organisms which favour the greatest sizes thus leading to the appearance of curved shape spectra. Temporary and permanent basins have similar taxonomic composition but the latter have higher species diversity, a more simplified temporal pattern and a size distribution dominated mainly by smaller sizes. In permanents basins zooplankton growth is not only conditioned by the availability of resources but by the variable predation of planktivorous fish, so that the temporal variability of the spectra may also be a result of temporal differences in fish predation. Size diversity seems to be a better indicator of the degree of this community structure than species diversity. The tendency of size diversity to increase during succession makes it useful to discriminate between different succession stages, fact that is not achieved by analysing only species diversity since it is low both under large and frequent or small and rare disturbances. Amino acid composition differences found among stages of copepod species indicate a gradual change in diet during the life cycle of these copepods, which provide evidence of food niche partitioning during ontogeny, whereas Daphnia species show a relatively constant amino acid composition. There is a relationship between the degree of trophic niche overlap among stages of the different species and nutrient concentration. Copepods, which have low trophic niche overlap among stages are dominant in food-limited environments, probably because trophic niche partitioning during development allow them to reduce intraspecific competition between adults, juveniles and nauplii. Daphnia species are only dominant in water bodies or periods with high productivity, probably due to the high trophic niche overlap between juveniles and adults. These findings suggest that, in addition to the effect of interspecific competition, predation and abiotic factors, the intraspecific competition might play also an important role in structuring zooplankton assemblages.