A participatory action research project at the nexus of health promotion and sustainability in higher education

Like many educational institutions, Deakin University has embraced the challenge of developing curricula to ensure that graduates are environmentally literate and competent to address sustainability in professional practice. Despite an abundance of literature pertaining to the link between human health and environmental degradation, the development of health-related education for sustainability curriculum has been slow. Health promotion, an integral aspect of health professional training in Australia, is considered an area of practice well suited to the action of sustainability. This article highlights the findings of a pilot project that explored which graduate-level health promotion competencies and principles for practice can be transferred to action on sustainability. Methodologically, this study offers a participatory action research process enhanced with case study design principles. Findings from the four case studies highlight that health promotion competencies are compatible with action on sustainability. The article also illuminates the themes in the literature about the value of mutually reinforcing pedagogies associated with education for sustainability and work-integrated learning. The article contributes to discussion in an emerging area of health curriculum, namely, health-related education for sustainability. It posits that health promotion is an area of the health curriculum that can support the development of competencies at the nexus between health and sustainability.

Facilitating a no-blame culture through project alliancing

Innovation occurs within the safety of a no-blame culture yet we see surprisingly scant literature on how this is facilitated within a construction project management context. The purpose of this paper is to demonstrate how innovation and promotion of innovative thinking in action is enabled through a no-blame culture in project alliances in Australia. We argue that innovation is dependent upon collaboration and true collaboration is inextricable linked to behavioural drivers. Foremost of these is a culture of openness and willingness to share the pain and gain from experimentation. Further, this culture requires that collaborators be protected from the threat of being blamed and held accountable for experimental failure. We draw upon theory and data gathered over several recent research studies on the experience of project alliances in Australia. The project alliance procurement form has a unique ‘no-blame’ behavioural contract clause that is crucial in developing a collaborative culture where innovation can evolve through a process of trial and error.

Cholinesterase Research Outreach Project (CROP): measuring cholinesterase activity and pesticide use in an agricultural community

BACKGROUND: Australian farmers and their workers are exposed to a wide variety of pesticides. Organophosphate (OP) insecticides are a widely used class of pesticide used for animal husbandry practices (Naphthalophos for sheep dipping, jetting and drench), crop production for pest control (Dimethoate) and in public health (Maldison for head lice). Acute poisonings with this class of insecticide are reported among agricultural workers and children around the globe, due to the inhibition of acetylcholinesterase (AChE). Less is known about chronic exposures. Regular monitoring of erythrocyte AChE will enable farmers to identify potential exposure to organophosphate insecticides and take action to reduce exposures and improve their health and safety practices. This study aims to assess and improve the integration of AChE monitoring into routine point of care health clinics, and provide farming and non-farming people with a link between their AChE activity and their household chemical and agrichemical use. METHODS/DESIGN: The research will target individuals who work on mixed farming enterprises and routinely using OPs (n = 50) and non-farmers (n = 30). Baseline data are collected regarding demographic, health conditions and behaviours, Kessler 10 (K10) scores, chemical use and personal protection. Baseline anthropometric measures include height, weight, hip and waist circumference, body fat analysis and, biochemical analysis of fasted total serum cholesterol, triglycerides, low-density cholesterol (LDL), high-density cholesterol (HDL) and blood glucose. Analysis of erythrocyte cholinesterase (EAChE) activity is also conducted using a finger prick test. Testing of EAChE is then repeated in all participants every 3 weeks for a maximum of three times over a period 10 weeks. Participants are provided with full feedback and counselling about their EAChE activity after each reading and a detailed summary provided to all participants at the completion of the study. Data will be analysed using repeated measures within a general linear model. DISCUSSION: This work will provide an evidence base and recommendations for the integration of EAChE monitoring into Australian rural health clinics, leading to research which will further quantify pesticide exposure both on the farm and in the home, highlighting the importance of sustaining and providing a safe work and home environment for farming communities. TRIAL REGISTRATION: ACTRN12613001256763.

Performance of Latin America and the Caribbean during the first years of the Decade of Action for Road Safety

This issue of the FAL Bulletin examines the performance of the countries of Latin America and the Caribbean during the first years of the decade of action for road safety. This document is part of the activities being undertaken by ECLAC as a United Nations regional commission in preparation for the Second Global High-Level Conference on Road Safety, which is to take place in Brasilia on 18 and 19 November 2015.

Diuron-induced rat urinary bladder carcinogenesis: Mode of action and human relevance evaluations using the International Programme on Chemical Safety framework

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of the binding and internalization properties of 12 DOTA-coupled and ¹¹¹In-labelled CCK2/gastrin receptor binding peptides: a collaborative project under COST Action BM0607

Specific overexpression of cholecystokinin 2 (CCK2)/gastrin receptors has been demonstrated in several tumours of neuroendocrine origin. In some of these cancer types, such as medullary thyroid cancer (MTC), a sensitive diagnostic modality is still unavailable and therapeutic options for inoperable lesions are needed. Peptide receptor radionuclide therapy (PRRT) may be a viable therapeutic strategy in the management of these patients. Several CCK2R-targeted radiopharmaceuticals have been described in recent years. As part of the European Union COST Action BM0607 we studied the in vitro and in vivo characteristics of 12 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA)-conjugated CCK2R binding peptides. In the present study, we analysed binding and internalization characteristics. Stability, biodistribution and imaging studies have been performed in parallel by other centres involved in the project.

Double Take Project: Using Applied Theatre For Campus Climate Change

Despite research gathered in the Campus Climate Report, I believe that it underrepresented the student experience of the social scene. The document primarily served as an identification tool for four major problems on campus: binge drinking, sexual assault, diversity, and disengagement in the classroom. Double Take Project also identifies similar issues however, this project uses theatrical techniques to gather the anecdotal reality of the student perspective. Double Take Project expands beyond the Campus Climate Report to inspire dialogue in a variety of student-to-student interactions and, more importantly, the project seeks action and solution plans. The social scene dominates our culture and its many issues result in concern for the safety, self-identity, and development of Bucknell students into thriving adults. Double Take Project is rooted in the belief that theatre is a palpable tool for social change. Over the course of many events, Double Take Project has utilized facets of theatre to provide opportunities to voice discontent, widen perception of normalcy on campus, and inspire confidence to act on personal beliefs. The Double Take Project uses many Applied Theatre methods to impact the social scene. For example, I conducted 36 student interviews and transformed the stories into a one-woman show, Rage Behind Curtains, which I performed at multiple venues across campus. I also used interviews to create a radio show airing one story per day. I conducted ten workshops with student groups, Fraternities and Sororities, and in the classroom utilizing Augusto Boal’s Theatre of the Oppressed (TO) techniques. I also created a “social scene confessional” where I stood outside the Elaine Langone Center with a sign that read, “Tell me a story about the social scene” from a wide variety of Bucknell students. Finally, I have assembled a Forum Theatre Company based on Augusto Boal’s method of the spect-actor, utilizing participants as both actors and spectators in the theatre piece. All of the names indicated in this paper have been altered to protect the identity of the participants. While planning events and conducting various theatrical experiences, I learned that there are a series of internal and external issues contributing to our social environment. Internally, students are conflicted with personal beliefs while battling outward social pressure. Whether they are on the outskirts or center of the social scene determines their response to this conflict. For example, I have discovered that students on the borders of the social culture respond with criticism because they feel excluded, whereas the student’s centrally involved critique the culture in private and while their persona appears to not want change. Externally, there are many structural issues that contribute to the current social climate such as without Fraternity meal plans, Cafeteria space is not sufficient to feed all of the students, exclusive party culture, and gendered housing. Through meetings with Deans and staff, I have learned there are also problems between administration and students, resulting in resentment and blame. Although addressing structural issues would instigate immediate change, in my opinion, internal student conflicts are the primary cause for the current negative social atmosphere. I believe that pressure to conform is rooted in lack of personal identity. Because students simply do not know themselves, they form strong social groups that become the definition of themselves. Without confident self-awareness, large and powerful groups coerce students to accept social norms resulting in the individual’s outward distaste for change, yet internal discomfort.

The use of mechanisms and modes of toxic action in integrated testing strategies: the report and recommendations of a workshop held as part of the European Union OSIRIS Integrated Project

This report on The Potential of Mode of Action (MoA) Information Derived from Non-testing and Screening Methodologies to Support Informed Hazard Assessment, resulted from a workshop organised within OSIRIS (Optimised Strategies for Risk Assessment of Industrial Chemicals through Integration of Non-test and Test Information), a project partly funded by the EU Commission within the Sixth Framework Programme. The workshop was held in Liverpool, UK, on 30 October 2008, with 35 attendees. The goal of the OSIRIS project is to develop integrated testing strategies (ITS) fit for use in the REACH system, that would enable a significant increase in the use of non-testing information for regulatory decision making, and thus minimise the need for animal testing. One way to improve the evaluation of chemicals may be through categorisation by way of mechanisms or modes of toxic action. Defining such groups can enhance read-across possibilities and priority settings for certain toxic modes or chemical structures responsible for these toxic modes. Overall, this may result in a reduction of in vivo testing on organisms, through combining available data on mode of action and a focus on the potentially most-toxic groups. In this report, the possibilities of a mechanistic approach to assist in and guide ITS are explored, and the differences between human health and environmental areas are summarised.

The role of workplace absence as an organizational mechanism in predicting employee alcohol and drug disorders

Background. EAP programs for airline pilots in companies with a well developed recovery management program are known to reduce pilot absenteeism following treatment. Given the costs and safety consequences to society, it is important to identify pilots who may be experiencing an AOD disorder to get them into treatment. ^ Hypotheses. This study investigated the predictive power of workplace absenteeism in identifying alcohol or drug disorders (AOD). The first hypothesis was that higher absenteeism in a 12-month period is associated with higher risk that an employee is experiencing AOD. The second hypothesis was that AOD treatment would reduce subsequent absence rates and the costs of replacing pilots on missed flights. ^ Methods. A case control design using eight years (time period) of monthly archival absence data (53,000 pay records) was conducted with a sample of (N = 76) employees having an AOD diagnosis (cases) matched 1:4 with (N = 304) non-diagnosed employees (controls) of the same profession and company (male commercial airline pilots). Cases and controls were matched on the variables age, rank and date of hire. Absence rate was defined as sick time hours used over the sum of the minimum guarantee pay hours annualized using the months the pilot worked for the year. Conditional logistic regression was used to determine if absence predicts employees experiencing an AOD disorder, starting 3 years prior to the cases receiving the AOD diagnosis. A repeated measures ANOVA, t tests and rate ratios (with 95% confidence intervals) were conducted to determine differences between cases and controls in absence usage for 3 years pre and 5 years post treatment. Mean replacement costs were calculated for sick leave usage 3 years pre and 5 years post treatment to estimate the cost of sick leave from the perspective of the company. ^ Results. Sick leave, as measured by absence rate, predicted the risk of being diagnosed with an AOD disorder (OR 1.10, 95% CI = 1.06, 1.15) during the 12 months prior to receiving the diagnosis. Mean absence rates for diagnosed employees increased over the three years before treatment, particularly in the year before treatment, whereas the controls’ did not (three years, x = 6.80 vs. 5.52; two years, x = 7.81 vs. 6.30, and one year, x = 11.00cases vs. 5.51controls. In the first year post treatment compared to the year prior to treatment, rate ratios indicated a significant (60%) post treatment reduction in absence rates (OR = 0.40, CI = 0.28, 0.57). Absence rates for cases remained lower than controls for the first three years after completion of treatment. Upon discharge from the FAA and company’s three year AOD monitoring program, case’s absence rates increased slightly during the fourth year (controls, x = 0.09, SD = 0.14, cases, x = 0.12, SD = 0.21). However, the following year, their mean absence rates were again below those of the controls (controls, x = 0.08, SD = 0.12, cases, x¯ = 0.06, SD = 0.07). Significant reductions in costs associated with replacing pilots calling in sick, were found to be 60% less, between the year of diagnosis for the cases and the first year after returning to work. A reduction in replacement costs continued over the next two years for the treated employees. ^ Conclusions. This research demonstrates the potential for workplace absences as an active organizational surveillance mechanism to assist managers and supervisors in identifying employees who may be experiencing or at risk of experiencing an alcohol/drug disorder. Currently, many workplaces use only performance problems and ignore the employee’s absence record. A referral to an EAP or alcohol/drug evaluation based on the employee’s absence/sick leave record as incorporated into company policy can provide another useful indicator that may also carry less stigma, thus reducing barriers to seeking help. This research also confirms two conclusions heretofore based only on cross-sectional studies: (1) higher absence rates are associated with employees experiencing an AOD disorder; (2) treatment is associated with lower costs for replacing absent pilots. Due to the uniqueness of the employee population studied (commercial airline pilots) and the organizational documentation of absence, the generalizability of this study to other professions and occupations should be considered limited. ^ Transition to Practice. The odds ratios for the relationship between absence rates and an AOD diagnosis are precise; the OR for year of diagnosis indicates the likelihood of being diagnosed increases 10% for every hour change in sick leave taken. In practice, however, a pilot uses approximately 20 hours of sick leave for one trip, because the replacement will have to be paid the guaranteed minimum of 20 hour. Thus, the rate based on hourly changes is precise but not practical. ^ To provide the organization with practical recommendations the yearly mean absence rates were used. A pilot flies on average, 90 hours a month, 1080 annually. Cases used almost twice the mean rate of sick time the year prior to diagnosis (T-1) compared to controls (cases, x = .11, controls, x = .06). Cases are expected to use on average 119 hours annually (total annual hours*mean annual absence rate), while controls will use 60 hours. The cases’ 60 hours could translate to 3 trips of 20 hours each. Management could use a standard of 80 hours or more of sick time claimed in a year as the threshold for unacceptable absence, a 25% increase over the controls (a cost to the company of approximately of $4000). At the 80-hour mark, the Chief Pilot would be able to call the pilot in for a routine check as to the nature of the pilot’s excessive absence. This management action would be based on a company standard, rather than a behavioral or performance issue. Using absence data in this fashion would make it an active surveillance mechanism. ^

The movement toward patient safety: State action related to reporting and disclosure of healthcare-associated infections

Increasing attention has been given to the problem of medical errors over the past decade. Included within that focused attention has been a strong interest in reducing the occurrence of healthcare-associated infections (HAIs). Acting concurrently with federal initiatives, the majority of U.S. states have statutorily required reporting and public disclosure of HAI data. Although the occurrence of these state statutory enactments and other state initiatives represent a recognition of the strong concern pertaining to HAIs, vast differences in each state’s HAI reporting and public disclosure requirements creates a varied and unequal response to what has become a national problem.^ The purpose of this research was to explore the variations in state HAI legal requirements and other state mandates. State actions, including statutory enactments, regulations, and other initiatives related to state reporting and public disclosure mechanisms were compared, discussed, and analyzed in an effort to illustrate the impact of the lack of uniformity as a public health concern.^ The HAI statutes, administrative requirements, and other mandates of each state and two U.S. territories were reviewed to answer the following seven research questions: How far has the state progressed in its HAI initiative? If the state has a HAI reporting requirement, is it mandatory or voluntary? What healthcare entities are subject to the reporting requirements? What data collection system is utilized? What measures are required to be reported? What is the public disclosure mechanism? How is the underlying reported information protected from public disclosure or other legal release?^ Secondary publicly available data, including state statutes, administrative rules, and other initiatives, were utilized to examine the current HAI-related legislative and administrative activity of the study subjects. The information was reviewed and analyzed to determine variations in HAI reporting and public disclosure laws. Particular attention was given to the seven key research questions.^ The research revealed that considerable progress has been achieved in state HAI initiatives since 2004. Despite this progress, however, when reviewing the state laws and HAI programs comparatively, considerable variations were found to exist with regards to the type of reporting requirements, healthcare facilities subject to the reporting laws, data collection systems utilized, reportable measures, public disclosure requirements, and confidentiality and privilege provisions. The wide variations in state statutes, administrative rules, and other agency directives create a fragmented and inconsistent approach to addressing the nationwide occurrence of HAIs in the U.S. healthcare system. ^

El análisis de la construcción sin pérdidas (Lean Construction) y su relación con el Project & Construction Management : propuesta de regulación en España y su inclusión en la ley de la ordenación de la edificación

El presente trabajo se basa en la filosofía de la Construcción sin Pérdidas (“Lean Construction”), analizando la situación de esta filosofía en el sector de la edificación en el contexto internacional y español, respondiendo las siguientes preguntas: 1. ¿Cómo surge el “Lean Construction”? 2. ¿Cuáles son sus actividades, funciones y cometidos? 3. ¿Existe regulación del ¨Lean Construction” en otros países? 4. ¿Existe demanda del ¨Lean Construction” en España? 5. ¿Existe regulación del ¨Lean Construction” en España? 6. ¿Cómo debería ser la regulación ¨Lean Construction” en España? 7. ¿Cuál es la relación del “Lean Construction” con el “Project & Construction Management”? 8. ¿Cómo debería ser la regulación de “Lean Construction” en España considerando su relación con el “Project & Construction Management”? Las preguntas indicadas las hemos respondido detalladamente en el presente trabajo, a continuación se resume las respuestas a dichas preguntas: 1. El “Lean Construction” surge en agosto de 1992, cuando el investigador finlandés Lauri Koskela publicó en la Universidad de Stanford el reporte TECHNICAL REPORT N° 72 titulado “Application of the New Production Philosophy to Construction”. Un año más tarde el Dr. Koskela invitó a un grupo de especialistas en construcción al primer workshop de esta materia en Finlandia, dando origen al International Group for Lean Construction (IGLC) lo que ha permitido extender la filosofía a EEUU, Europa, América, Asia, Oceanía y África. “Lean Construction” es un sistema basado en el enfoque “Lean Production” desarrollado en Japón por Toyota Motors a partir de los años cincuenta, sistema que permitió a sus fábricas producir unidades con mayor eficiencia que las industrias americanas, con menores recursos, en menor tiempo, y con un número menor de errores de fabricación. 2. El sistema “Lean Construction” busca maximizar el valor y disminuir las pérdidas de los proyectos generando una coordinación eficiente entre los involucrados, manejando un proyecto como un sistema de producción, estrechando la colaboración entre los participantes de los proyectos, capacitándoles y empoderándoles, fomentando una cultura de cambio. Su propósito es desarrollar un proceso de construcción en el que no hayan accidentes, ni daños a equipos, instalaciones, entorno y comunidad, que se realice en conformidad con los requerimientos contractuales, sin defectos, en el plazo requerido, respetando los costes presupuestados y con un claro enfoque en la eliminación o reducción de las pérdidas, es decir, las actividades que no generen beneficios. El “Last Planner System”, o “Sistema del Último Planificador”, es un sistema del “Lean Construction” que por su propia naturaleza protege a la planificación y, por ende, ayuda a maximizar el valor y minimizar las pérdidas, optimizando de manera sustancial los sistemas de seguridad y salud. El “Lean Construction” se inició como un concepto enfocado a la ejecución de las obras, posteriormente se aplicó la filosofía a todas las etapas del proyecto. Actualmente considera el desarrollo total de un proyecto, desde que nace la idea hasta la culminación de la obra y puesta en marcha, considerando el ciclo de vida completo del proyecto. Es una filosofía de gestión, metodologías de trabajo y una cultura empresarial orientada a la eficiencia de los procesos y flujos. La filosofía “Lean Construction” se está expandiendo en todo el mundo, además está creciendo en su alcance, influyendo en la gestión contractual de los proyectos. Su primera evolución consistió en la creación del sistema “Lean Project Delivery System”, que es el concepto global de desarrollo de proyectos. Posteriormente, se proponen el “Target Value Design”, que consiste en diseñar de forma colaborativa para alcanzar los costes y el valor requerido, y el “Integrated Project Delivery”, en relación con sistemas de contratos relacionales (colaborativos) integrados, distintos a los contratos convencionales. 3. Se verificó que no existe regulación específica del ¨Lean Construction” en otros países, en otras palabras, no existe el agente con el nombre específico de “Especialista en Lean Construction” o similar, en consecuencia, es un agente adicional en el proyecto de la edificación, cuyas funciones y cometidos se pueden solapar con los del “Project Manager”, “Construction Manager”, “Contract Manager”, “Safety Manager”, entre otros. Sin embargo, se comprobó la existencia de formatos privados de contratos colaborativos de Integrated Project Delivery, los cuales podrían ser tomados como unas primeras referencias para futuras regulaciones. 4. Se verificó que sí existe demanda del ¨Lean Construction” en el desarrollo del presente trabajo, aunque aún su uso es incipiente, cada día existe más interesados en el tema. 5. No existe regulación del ¨Lean Construction” en España. 6. Uno de los objetivos fundamentales de esta tesis es el de regular esta figura cuando actúe en un proyecto, definir y realizar una estructura de Agente de la Edificación, según la Ley de Ordenación de la Edificación (LOE), y de esta manera poder introducirla dentro de la Legislación Española, protegiéndola de eventuales responsabilidades civiles. En España existe jurisprudencia (sentencias de los tribunales de justicia españoles) con jurisdicción civil basada en la LOE para absolver o condenar a agentes de la edificación que son definidos en los tribunales como “gestores constructivos” o similares. Por este motivo, en un futuro los tribunales podrían dictaminar responsabilidades solidarias entre el especialista “Lean Construction” y otros agentes del proyecto, dependiendo de sus actuaciones, y según se implemente el “Lean Project Delivery System”, el “Target Value Design” y el “Integrated Project Delivery”. Por otro lado, es posible que el nivel de actuación del especialista “Lean Construcción” pueda abarcar la gestión del diseño, la gestión de la ejecución material (construcción), la gestión de contratos, o la gestión integral de todo el proyecto de edificación, esto último, en concordancia con la última Norma ISO 21500:2012 o UNE-ISO 21500:2013 Directrices para la dirección y gestión de proyectos. En consecuencia, se debería incorporar adecuadamente a uno o más agentes de la edificación en la LOE de acuerdo a sus funciones y responsabilidades según los niveles de actuación del “Especialista en Lean Construction”. Se propone la creación de los siguientes agentes: Gestor del Diseño, Gestor Constructivo y Gestor de Contratos, cuyas definiciones están desarrolladas en este trabajo. Estas figuras son definidas de manera general, puesto que cualquier “Project Manager” o “DIPE”, gestor BIM (Building Information Modeling), o similar, puede actuar como uno o varios de ellos. También se propone la creación del agente “Gestor de la Construcción sin Pérdidas”, como aquel agente que asume las actuaciones del “gestor de diseño”, “gestor constructivo” y “gestor de contratos” con un enfoque en los principios del Lean Production. 7. En la tesis se demuestra, por medio del uso de la ISO 21500, que ambos sistemas son complementarios, de manera que los proyectos pueden tener ambos enfoques y ser compatibilizados. Un proyecto que use el “Project & Construction Management” puede perfectamente apoyarse en las herramientas y técnicas del “Lean Construction” para asegurar la eliminación o reducción de las pérdidas, es decir, las actividades que no generen valor, diseñando el sistema de producción, el sistema de diseño o el sistema de contratos. 8. Se debería incorporar adecuadamente al agente de la edificación “Especialista en Lean Construction” o similar y al agente ¨Especialista en Project & Construction Management” o DIPE en la Ley de Ordenación de la Edificación (LOE) de acuerdo a sus funciones y responsabilidades, puesto que la jurisprudencia se ha basado para absolver o condenar en la referida Ley. Uno de los objetivos fundamentales de esta tesis es el de regular la figura del “Especialista en Lean Construction” cuando actúa simultáneamente con el DIPE, y realizar una estructura de Agente de la Edificación según la LOE, y de esta manera protegerlo de eventuales responsabilidades solidarias. Esta investigación comprueba que la propuesta de definición del agente de edificación DIPE, según la LOE, presentada en la tesis doctoral del Doctor Manuel Soler Severino es compatible con las nuevas definiciones propuestas. El agente DIPE puede asumir los roles de los diferentes gestores propuestos en esta tesis si es que se especializa en dichas materias, o, si lo estima pertinente, recomendar sus contrataciones. ABSTRACT This work is based on the Lean Construction philosophy; an analysis is made herein with regard to the situation of this philosophy in the building sector within the international and Spanish context, replying to the following questions: 1. How did the concept of Lean Construction emerge? 2. Which are the activities, functions and objectives of Lean Construction? 3. Are there regulations on Lean Construction in other countries? 4. Is there a demand for Lean Construction in Spain? 5. Are there regulations on Lean Construction in Spain? 6. How should regulations on Lean Construction be developed in Spain? 7. What is the relationship between Lean Construction and the Project & Construction Management? 8. How should regulations on Lean Construction be developed in Spain considering its relationship with the Project & Construction Management? We have answered these questions in detail here and the replies are summarized as follows: 1. The concept of Lean Construction emerged in august of 1992, when Finnish researcher Lauri Koskela published in Stanford University TECHNICAL REPORT N° 72 entitled “Application of the New Production Philosophy to Construction”. A year later, Professor Koskela invited a group of construction specialists to Finland to the first workshop conducted on this matter; thus, the International Group for Lean Construction (IGLC) was established, which has contributed to extending the philosophy to the United States, Europe, the Americas, Asia, Oceania, and Africa. Lean Construction is a system based on the Lean Production approach, which was developed in Japan by Toyota Motors in the 1950s. Thanks to this system, the Toyota plants were able to produce more units, with greater efficiency than the American industry, less resources, in less time, and with fewer manufacturing errors. 2. The Lean Construction system aims at maximizing the value of projects while reducing waste, producing an effective coordination among those involved; it manages projects as a production system, enhancing collaboration between the parties that participate in the projects while building their capacities, empowering them, and promoting a culture of change. Its purpose is to develop a construction process free of accidents, without damages to the equipment, facilities, environment and community, flawless, in accordance with contractual requirements, within the terms established, respecting budgeted costs, and with a clear approach to eliminating or reducing waste, that is, activities that do not generate benefits. The Last Planner System is a Lean Construction system, which by its own nature protects planning and, therefore, helps to maximize the value and minimize waste, optimizing substantially the safety and health systems. Lean Construction started as a concept focused on the execution of works, and subsequently the philosophy was applied to all the stages of the project. At present it considers the project’s total development, since the time ideas are born until the completion and start-up of the work, taking into account the entire life cycle of the project. It is a philosophy of management, work methodologies, and entrepreneurial culture aimed at the effectiveness of processes and flows. The Lean Construction philosophy is extending all over the world and its scope is becoming broader, having greater influence on the contractual management of projects. It evolved initially through the creation of the Lean Project Delivery System, a global project development concept. Later on, the Target Value Design was developed, based on collaborative design to achieve the costs and value required, as well as the Integrated Project Delivery, in connection with integrated relational (collaborative) contract systems, as opposed to conventional contracts. 3. It was verified that no specific regulations on Lean Construction exist in other countries, in other words, there are no agents with the specific name of “Lean Construction Specialist” or other similar names; therefore, it is an additional agent in building projects, which functions and objectives can overlap those of the Project Manager, Construction Manager, Contract Manager, or Safety Manager, among others. However, the existence of private collaborative contracts of Integrated Project Delivery was confirmed, which could be considered as first references for future regulations. 4. There is a demand for Lean Construction in the development of this work; even though it is still emerging, there is a growing interest in this topic. 5. There are no regulations on Lean Construction in Spain. 6. One of the main objectives of this thesis is to regulate this role when acting in a project, and to define and develop a Building Agent structure, according to the Building Standards Law (LOE by its acronym in Spanish), in order to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, which are defined in the courts as “construction managers” or similar. For this reason, courts could establish in the future joint and several liabilities between the Lean Construction Specialist and other agents of the project, depending on their actions and based on the implementation of the Lean Project Delivery System, the Target Value Design, and the Integrated Project Delivery. On the other hand, it is possible that the level of action of the Lean Construction Specialist may comprise design management, construction management and contract management, or the integral management of the entire building project in accordance with the last ISO 21500:2012 or UNE-ISO 21500:2013, guidelines for the management of projects. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the Lean Construction Specialist. The creation of the following agents is proposed: Design Manager, Construction Manager, and Contract Manager, which definitions are developed in this work. These agents are defined in general, since any Project Manager or DIPE, Building Information Modeling (BIM) Manager or similar, may act as one or as many of them. The creation of the Lean Construction Manager is also proposed, as the agent that takes on the role of the Design Manager, Construction Manager and Contract Manager with a focus on the Lean Production principles. 7. In the thesis it is demonstrated that through the implementation of the ISO 21500, both systems are supplementary, so projects may have both approaches and be compatible. A project that applies the Project & Construction Management may perfectly have the support of the tools, techniques and practices of Lean Construction to ensure the elimination or reduction of losses, that is, those activities that do not generate value, thus designing the production system, the design system, or the contract system. 8. The Lean Construction Specialist or similar and the Specialist in Project & Construction Management should be incorporated appropriately into the LOE according to their functions and responsibilities, since jurisprudence has been based on such Law to acquit or convict. One of the main objectives of this thesis is the regulate the role of the Lean Construction Specialist when acting simultaneously with the DIPE, and to develop a structure of the building agent, according to the LOE, and in this way protect such agent from joint and several liabilities. This research proves that the proposal to define the DIPE building agent, according to the LOE, and presented in the doctoral dissertation of Manuel Soler Severino, Ph.D. is compatible with the new definitions proposed. The DIPE agent may assume the roles of the different managers proposed in this thesis if he specializes in those topics or, if deemed pertinent, recommends that they be engaged.

Health care, information needs, and outreach: reaching Ohio's rural citizens

As a rural state, Ohio has a vital interest in addressing rural health and information needs. NetWellness is a Web-based consumer health information service that focuses on the needs of the residents of Ohio. Health sciences faculty from the state's three Carnegie Research I universities—University of Cincinnati, Case Western Reserve University, and The Ohio State University—create and evaluate content and provide Ask an Expert service to all visitors. Through partnerships at the state and local levels, involving public, private, commercial, and noncommercial organizations, NetWellness has grown from a regional demonstration project in 1995 to a key statewide service. Collaboration with public libraries, complemented by alliances with kindergarten through twelfth grade agencies, makes NetWellness Ohio's essential health information resource.