Use of bacterial whole-genome sequencing to investigate local persistence and spread in bovine tuberculosis

Mycobacterium bovis is the causal agent of bovine tuberculosis, one of the most important diseases currently facing the UK cattle industry. Here, we use high-density whole genome sequencing (WGS) in a defined sub-population of M. bovis in 145 cattle across 66 herd breakdowns to gain insights into local spread and persistence. We show that despite low divergence among isolates, WGS can in principle expose contributions of under-sampled host populations to M. bovis transmission. However, we demonstrate that in our data such a signal is due to molecular type switching, which had been previously undocumented for M. bovis. Isolates from farms with a known history of direct cattle movement between them did not show a statistical signal of higher genetic similarity. Despite an overall signal of genetic isolation by distance, genetic distances also showed no apparent relationship with spatial distance among affected farms over distances <5 km. Using simulations, we find that even over the brief evolutionary timescale covered by our data, Bayesian phylogeographic approaches are feasible. Applying such approaches showed that M. bovis dispersal in this system is heterogeneous but slow overall, averaging 2 km/year. These results confirm that widespread application of WGS to M. bovis will bring novel and important insights into the dynamics of M. bovis spread and persistence, but that the current questions most pertinent to control will be best addressed using approaches that more directly integrate WGS with additional epidemiological data.

VentBase:Developing a consensus among stakeholders in the deep-sea regarding environmental impact assessment for deep-sea mining-A workshop report

Mining seafloor massive sulfides for metals is an emergent industry faced with environmental management challenges. These revolve largely around limits to our current understanding of biological variability in marine systems, a challenge common to all marine environmental management. VentBase was established as a forum where academic, commercial, governmental, and non-governmental stakeholders can develop a consensus regarding the management of exploitative activities in the deep-sea. Participants advocate a precautionary approach with the incorporation of lessons learned from coastal studies. This workshop report from VentBase encourages the standardization of sampling methodologies for deep-sea environmental impact assessment. VentBase stresses the need for the collation of spatial data and importance of datasets amenable to robust statistical analyses. VentBase supports the identification of set-asides to prevent the local extirpation of vent-endemic communities and for the post-extraction recolonization of mine sites. © 2013.

Comparison of granulometric methods and sampling strategies used in marine habitat classification and Ecological Status assessment

Sediment particle size analysis (PSA) is routinely used to support benthic macrofaunal community distribution data in habitat mapping and Ecological Status (ES) assessment. No optimal PSA Method to explain variability in multivariate macrofaunal distribution has been identified nor have the effects of changing sampling strategy been examined. Here, we use benthic macrofaunal and PSA grabs from two embayments in the south of Ireland. Four frequently used PSA Methods and two common sampling strategies are applied. A combination of laser particle sizing and wet/dry sieving without peroxide pre-treatment to remove organics was identified as the optimal Method for explaining macrofaunal distributions. ES classifications and EUNIS sediment classification were robust to changes in PSA Method. Fauna and PSA samples returned from the same grab sample significantly decreased macrofaunal variance explained by PSA and caused ES to be classified as lower. Employing the optimal PSA Method and sampling strategy will improve benthic monitoring. © 2012 Elsevier Ltd.

Influence of service loading and the resulting micro-cracks on chloride resistance of concrete

Chloride-induced corrosion of steel in reinforced concrete structures is one of the main problems affecting their durability, but most previous research projects and case studies have focused on concretes without cracks or not subjected to any structural load. Although it has been recognised that structural cracks do influence the chloride transport and chloride induced corrosion in reinforced concrete structures, there is little published work on the influence of micro-cracks due to service loads on these properties. Therefore the effect of micro-cracks caused by loading on chloride transport into concrete was studied. Four different stress levels (0%, 25%, 50% and 75% of the stress at ultimate load – fu) were applied to 100 mm diameter concrete discs and chloride migration was measured using a bespoke test setup based on the NT BUILD 492 test. The effects of replacing Portland cement CEMI by ground granulated blast-furnace slag (GGBS), pulverised fuel ash (PFA) and silica fume (SF) on chloride transport in concrete under sustained loading were studied. The results have indicated that chloride migration coefficients changed little when the stress level was below 50% of the fu; however, it is desirable to keep concrete stress less than 25% fu if this is practical. The effect of removing the load on the change of chloride migration coefficient was also studied. A recovery of around 50% of the increased chloride migration coefficient was found in the case of concretes subjected to 75% of the fu when the load was removed.

Design Optimisation for Compression Moulded Sheet Moulded Compounds

This paper builds on previous work to show how using holistic and iterative design optimisation tools can be used to produce a commercially viable product that reduces a costly assembly into a single moulded structure. An assembly consisting of a structural metallic support and compression moulding outer shell undergo design optimisation and analysis to remove the support from the assembly process in favour of a structural moulding. The support is analysed and a sheet moulded compound (SMC) alternative is presented, this is then combined into a manufacturable shell design which is then assessed on viability as an alternative to the original.
Alongside this a robust material selection system is implemented that removes user bias towards materials for designs. This system builds on work set out by the Cambridge Material Selector and Boothroyd and Dewhurst, while using a selection of applicable materials currently available for the compression moulding process. This material selection process has been linked into the design and analysis stage, via scripts for use in the finite element environment. This builds towards an analysis toolkit that is suggested to develop and enhance manufacturability of design studies.

An Automated Design Framework for Assembly Task Simulation

This paper presents an automated design framework for the development of individual part forming tools for a composite stiffener. The framework uses parametrically developed design geometries for both the part and its layup tool. The framework has been developed with a functioning user interface where part / tool combinations are passed to a virtual environment for utility based assessment of their features and assemblability characteristics. The work demonstrates clear benefits in process design methods with conventional design timelines reduced from hours and days to minutes and seconds. The methods developed here were able to produce a digital mock up of a component with its associated layup tool in less than 3 minutes. The virtual environment presenting the design to the designer for interactive assembly planning was generated in 20 seconds. Challenges still exist in determining the level of reality required to provide an effective learning environment in the virtual world. Full representation of physical phenomena such as gravity, part clashes and the representation of standard build functions require further work to represent real physical phenomena more accurately.

An optimized reverse-phase high performance liquid chromatographic method for evaluating percutaneous absorption of glucosamine hydrochloride

A relatively simple, selective, precise and accurate high performance liquid chromatography (HPLC) method based on a reaction of phenylisothiocyanate (PITC) with glucosamine (GL) in alkaline media was developed and validated to determine glucosamine hydrochloride permeating through human skin in vitro. It is usually problematic to develop an accurate assay for chemicals traversing skin because the excellent barrier properties of the tissue ensure that only low amounts of the material pass through the membrane and skin components may leach out of the tissue to interfere with the analysis. In addition, in the case of glucosamine hydrochloride, chemical instability adds further complexity to assay development. The assay, utilising the PITC-GL reaction was refined by optimizing the reaction temperature, reaction time and PITC concentration. The reaction produces a phenylthiocarbamyl-glucosamine (PTC-GL) adduct which was separated on a reverse-phase (RP) column packed with 5 microm ODS (C18) Hypersil particles using a diode array detector (DAD) at 245 nm. The mobile phase was methanol-water-glacial acetic acid (10:89.96:0.04 v/v/v, pH 3.5) delivered to the column at 1 ml min-1 and the column temperature was maintained at 30 degrees C. Galactosamine hydrochloride (Gal-HCl) was used as an internal standard. Using a saturated aqueous solution of glucosamine hydrochloride, in vitro permeation studies were performed at 32+/-1 degrees C over 48 h using human epidermal membranes prepared by a heat separation method and mounted in Franz-type diffusion cells with a diffusional area 2.15+/-0.1 cm2. The optimum derivatisation reaction conditions for reaction temperature, reaction time and PITC concentration were found to be 80 degrees C, 30 min and 1% v/v, respectively. PTC-Gal and GL adducts eluted at 8.9 and 9.7 min, respectively. The detector response was found to be linear in the concentration range 0-1000 microg ml-1. The assay was robust with intra- and inter-day precisions (described as a percentage of relative standard deviation, %R.S.D.) <12. Intra- and inter-day accuracy (as a percentage of the relative error, %RE) was <or=-5.60 and <or=-8.00, respectively. Using this assay, it was found that GL-HCl permeates through human skin with a flux 1.497+/-0.42 microg cm-2 h-1, a permeability coefficient of 5.66+/-1.6x10(-6) cm h-1 and with a lag time of 10.9+/-4.6 h.

The Well London program - a cluster randomized trial of community engagement for improving health behaviors and mental wellbeing: baseline survey results

Background The Well London programme used community engagement, complemented by changes to the physical and social neighbourhood environment, to improve physical activity levels, healthy eating and mental wellbeing in the most deprived communities in London. The effectiveness of Well London is being evaluated in a pair-matched cluster randomised trial (CRT). The baseline survey data are reported here. Methods The CRT involved 20 matched pairs of intervention and control communities (defined as UK census lower super output areas; ranked in the 11% most deprived LSOAs in London by Index of Multiple Deprivation) across 20 London boroughs. The primary trial outcomes, sociodemographic information and environmental neighbourhood characteristics were assessed in three quantitative components within the Well London CRT at baseline: a cross-sectional, interviewer-administered adult household survey; a self-completed, school-based adolescent questionnaire; a fieldworker completed neighbourhood environmental audit. Baseline data collection occurred in 2008. Physical activity, healthy eating and mental wellbeing were assessed using standardised, validated questionnaire tools. Multiple imputation was used to account for missing data in the outcomes and other variables in the adult and adolescent surveys. Results There were 4107 adults and 1214 adolescent respondents in the baseline surveys. The intervention and control areas were broadly comparable with respect to the primary outcomes and key sociodemographic characteristics. The environmental characteristics of the intervention and control neighbourhoods were broadly similar. There was greater between cluster variation in the primary outcomes in the adult population compared to the adolescent population. Levels of healthy eating, smoking and self-reported anxiety/depression were similar in the Well London population and the national Health Survey for England. Levels of physical activity were higher in the Well London population but this is likely to be due to the different measurement tools used in the two surveys. Conclusions Randomisation of social interventions such as Well London is acceptable and feasible and in this study the intervention and control arms are well balanced with respect to the primary outcomes and key sociodemographic characteristics. The matched design has improved the statistical efficiency of the study amongst adults but less so amongst adolescents. Follow-up data collection will be completed 2012.

Physical activity in deprived communities in London: examining individual and neighbourhood-level factors

Introduction: The objectives of this study were to examine relationships between neighbourhood-level and individual-level characteristics and physical activity in deprived London neighbourhoods. Methods: In 40 of the most deprived neighbourhoods in London (ranked in top 11% in London by Index of Multiple Deprivation) a cross-sectional survey (n = 4107 adults aged > = 16 years), neighbourhood audit tool, GIS measures and routine data measured neighbourhood and individual-level characteristics. The binary outcome was meeting the minimum recommended (CMO, UK) 5×30 mins moderate physical activity per week. Multilevel modelling was used to examine associations between physical activity and individual and neighbourhood-level characteristics. Results: Respondents living more than 300 m away from accessible greenspace had lower odds of achieving recommended physical activity levels than those who lived within 300 m; from 301–600 m (OR = 0.7; 95% CI 0.5–0.9) and from 601–900 m (OR = 0.6; 95% CI 0.4–0.8). There was substantial residual between-neighbourhood variance in physical activity (median odds ratio = 1.7). Other objectively measured neighbourhood-level characteristics were not associated with physical activity levels. Conclusions Distance to nearest greenspace is associated with meeting recommended physical activity levels in deprived London neighbourhoods. Despite residual variance in physical activity levels between neighbourhoods, we found little evidence for the influence of other measured neighbourhood-level characteristics.

Physical Activity in Deprived Communities in London: Examining Individual and Neighbourhood-Level Factors

Introduction The objectives of this study were to examine relationships between neighbourhood-level and individual-level characteristics and physical activity in deprived London neighbourhoods. Methods In 40 of the most deprived neighbourhoods in London (ranked in top 11% in London by Index of Multiple Deprivation) a cross-sectional survey (n = 4107 adults aged > = 16 years), neighbourhood audit tool, GIS measures and routine data measured neighbourhood and individual-level characteristics. The binary outcome was meeting the minimum recommended (CMO, UK) 5×30 mins moderate physical activity per week. Multilevel modelling was used to examine associations between physical activity and individual and neighbourhood-level characteristics. Results Respondents living more than 300 m away from accessible greenspace had lower odds of achieving recommended physical activity levels than those who lived within 300 m; from 301–600 m (OR = 0.7; 95% CI 0.5–0.9) and from 601–900 m (OR = 0.6; 95% CI 0.4–0.8). There was substantial residual between-neighbourhood variance in physical activity (median odds ratio = 1.7). Other objectively measured neighbourhood-level characteristics were not associated with physical activity levels. Conclusions Distance to nearest greenspace is associated with meeting recommended physical activity levels in deprived London neighbourhoods. Despite residual variance in physical activity levels between neighbourhoods, we found little evidence for the influence of other measured neighbourhood-level characteristics.

The Educational and Employment Aspirations of Adolescents from Areas of High Deprivation in London

Adolescents from areas of high deprivation are often assumed to have low aspirations for the future. However, recent research has suggested otherwise and there have been calls for more substantial investigation into the relationship between poverty and aspiration. This article reports levels and variation in aspiration from 1,214 adolescents (49.5% male; 50.5% female) living in areas of high deprivation across 20 London boroughs. A strength of this study is our large and diverse population of low socio-economic status (SES) adolescents, comprising of white British (22%), black African (21%), black Caribbean (9%), Indian/Pakistani/Bangladeshi/Other Asian (24%), mixed ethnicity (9%), and 15% defining themselves as Other. Our measures indicated a high group level of reported aspiration with notable variations. Females reported higher educational (but not occupational) aspirations than males; white British students reported lower educational and occupational aspirations than other ethnic groups; and black African children reported the highest educational aspirations. Perceived parental support for education had the largest positive association with aspirations. In contrast to previous findings from studies carried out in the United States, aspirations were found to be negatively associated with perceptions of school and school peer environment. These measures explored feelings of safety, happiness and belonging within the school environment and school peer group. We discuss possible explanations for this unexpected finding within our population of adolescents from UK state schools and how it might affect future policy interventions. This study makes an important contribution to the literature on adolescent aspirations because of the unique nature of the data sample and the multiple domains of functioning and aspiration measured.