Defining the light emitting area for displays in the unipolar regime of highly efficient light emitting transistors

Light-emitting field effect transistors (LEFETs) are an emerging class of multifunctional optoelectronic devices. It combines the light emitting function of an OLED with the switching function of a transistor in a single device architecture the dual functionality of LEFETs has the potential applications in active matrix displays. However, the key problem of existing LEFETs thus far has been their low EQEs at high brightness, poor ON/OFF and poorly defined light emitting area-a thin emissive zone at the edge of the electrodes. Here we report heterostructure LEFETs based on solution processed unipolar charge transport and an emissive polymer that have an EQE of up to 1% at a brightness of 1350a €...cd/m 2, ON/OFF ratio > 10 4 and a well-defined light emitting zone suitable for display pixel design. We show that a non-planar hole-injecting electrode combined with a semi-transparent electron-injecting electrode enables to achieve high EQE at high brightness and high ON/OFF ratio. Furthermore, we demonstrate that heterostructure LEFETs have a better frequency response (f cut-off = 2.6a €...kHz) compared to single layer LEFETs the results presented here therefore are a major step along the pathway towards the realization of LEFETs for display applications.

Efficient and bright polymer light emitting field effect transistors

Light emitting field effect transistors (LEFETs) are emerging as a multi-functional class of optoelectronic devices. LEFETs can simultaneously execute light emission and the standard logic functions of a transistor in a single architecture. However, current LEFET architectures deliver either high brightness or high efficiency but not both concurrently, thus limiting their use in technological applications. Here we show an LEFET device strategy that simultaneously improves brightness and efficiency. The key step change in LEFET performance arises from the bottom gate top-contact device architecture in which the source/drain electrodes are semitransparent and the active channel contains a bi-layer comprising of a high mobility charge-transporting polymer, and a yellow-green emissive polymer. A record external quantum efficiency (EQE) of 2.1% at 1000cd/m2 is demonstrated for polymer based bilayer LEFETs.

Optimized multilayer indium-free electrodes for organic photovoltaics

Flexible multilayer electrodes that combine high transparency, high conductivity, and efficient charge extraction have been deposited, characterised and used as the anode in organic solar cells. The anode consists of an AZO/Ag/AZO stack plus a very thin oxide interlayer whose ionization potential is fine-tuned by manipulating its gap state density to optimise charge transfer with the bulk heterojunction active layer consisting of poly(n-3- hexylthiophene-2,5-diyl) and phenyl-C61-butyric acid methyl ester (P3HT:BC61BM). The deposition method for the stack was compatible with the low temperatures required for polymer substrates. Optimisation of the electrode stack was achieved by modelling the optical and electrical properties of the device and a power conversion efficiency of 2.9% under AM1.5 illumination compared to 3.0% with an ITO-only anode and 3.5% for an ITO:PEDOT electrode. Dark I-V reverse bias characteristics indicate very low densities of occupied buffer states close to the HOMO level of the hole conductor, despite observed ionization potential being high enough. Their elimination should raise efficiency to that with ITO:PEDOT.

Defective co-creation: Developing a typology of consumer dysfunction in professional services

Purpose This study aims to explore the scope of consumers’ defective co-creation behaviour in professional service encounters. One of the founding premises of service-dominant logic (Vargo and Lusch, 2004, 2008) is that consumers co-create the value they derive from service encounters. In practice, however, dysfunctional consumer behaviour can obstruct value co-creation. Extant research has not yet investigated consumers’ defective co-creation behaviour in highly relational services, such as professional services, that are heavily reliant on co-creation. Design/methodology/approach To investigate defective co-creation in professional services, 164 critical incidents were collected from 38 health-care and financial service providers using the critical incident technique within semi-structured, in-depth interviews. Thematic coding was used to identify emergent themes and patterns of consumer behaviour. Findings Thematic coding resulted in a comprehensive typology of consumers’ defective co-creation behaviour that both confirms the prevalence of previously identified dysfunctional behaviours (e.g. verbal abuse and physical aggression) and identifies two new forms of consumer misbehaviour: underparticipation and overparticipation. Further, these behaviours can vary, escalate and co-occur during service encounters. Originality/value Both underparticipation and overparticipation are newly identified forms of defective co-creation that need to be examined within the broader framework of service-dominant logic (SDL).

Enhanced electron lifetime of CdSe/CdS quantum dot (QD) sensitized solar cells using ZnSe core–shell structure with efficient regeneration of quantum Ddots

Research on development of efficient passivation materials for high performance and stable quantum dot sensitized solar cells (QDSCs) is highly important. While ZnS is one of the most widely used passivation material in QDSCs, an alternative material based on ZnSe which was deposited on CdS/CdSe/TiO2 photoanode to form a semi-core/shell structure has been found to be more efficient in terms of reducing electron recombination in QDSCs in this work. It has been found that the solar cell efficiency was improved from 1.86% for ZnSe0 (without coating) to 3.99% using 2 layers of ZnSe coating (ZnSe2) deposited by successive ionic layer adsorption and reaction (SILAR) method. The short circuit current density (Jsc) increased nearly 1-fold (from 7.25 mA/cm2 to13.4 mA/cm2), and the open circuit voltage (Voc) was enhanced by 100 mV using ZnSe2 passivation layer compared to ZnSe0. Studies on the light harvesting efficiency (ηLHE) and the absorbed photon-to-current conversion efficiency (APCE) have revealed that the ZnSe coating layer caused the enhanced ηLHE at wavelength beyond 500 nm and a significant increase of the APCE over the spectrum 400−550 nm. A nearly 100% APCE was obtained with ZnSe2, indicating the excellent charge injection and collection process in the device. The investigation on charge transport and recombination of the device has indicated that the enhanced electron collection efficiency and reduced electron recombination should be responsible for the improved Jsc and Voc of the QDSCs. The effective electron lifetime of the device with ZnSe2 was nearly 6 times higher than ZnSe0 while the electron diffusion coefficient was largely unaffected by the coating. Study on the regeneration of QDs after photoinduced excitation has indicated that the hole transport from QDs to the reduced species (S2−) in electrolyte was very efficient even when the QDs were coated with a thick ZnSe shell (three layers). For comparison, ZnS coated CdS/CdSe sensitized solar cell with optimum shell thickness was also fabricated, which generated a lower energy conversion efficiency (η = 3.43%) than the ZnSe based QDSC counterpart due to a lower Voc and FF. This study suggests that ZnSe may be a more efficient passivation layer than ZnS, which is attributed to the type II energy band alignment of the core (CdS/CdSe quantum dots) and passivation shell (ZnSe) structure, leading to more efficient electron−hole separation and slower electron recombination.

Cough and reflux esophagitis in children: their co-existence and airway cellularity

Background There are no prospective studies that have examined for chronic cough in children without lung disease but with gastroesophageal reflux (GER). In otherwise healthy children undergoing flexible upper gastrointestinal endoscopy (esophago-gastroscopy), the aims of the study were to (1) define the frequency of cough in relation to symptoms of GER, (2) examine if children with cough and reflux esophagitis (RE) have different airway cellularity and microbiology in bronchoalveolar lavage (BAL) when compared to those without. Methods Data specific for chronic cough (>4-weeks), symptoms of GER and cough severity were collected. Children aged <16-years (n = 150) were defined as 'coughers' (C+) if a history of cough in association with their GER symptoms was elicited before BAL were obtained during elective esophago-gastroscopy. Presence of esophagitis on esophageal biopsies was considered reflux esophagitis positive (E+). Results C+ (n = 69) were just as likely as C- (n = 81) to have esophagitis, odds ratio 0.87 (95%CI 0.46, 1.7). Median neutrophil percentage in BAL was significantly different between groups; highest in C+E- (7, IQR 28) and lowest in C-E+ (5, IQR 6). BAL positive bacterial culture occurred in 20.7% and were more likely present in current coughers (OR 3.37, 95%CI 1.39, 8.08). Airway neutrophilia (median 20%, IQR 34) was significantly higher in those with BAL positive bacterial cultures than those without (5%, 4; p = 0.0001). Conclusion In children without lung disease, the common co-existence of cough with symptoms of GER is independent of the occurrence of esophagitis. Airway neutrophilia when present in these children is more likely to be related to airway bacterial infection and not to esophagitis.

Influence of interlayer properties on the blast performance of laminated glass panels

This paper investigates the influence of interlayer properties on the blast performance of laminated glass (LG) panels. A parametric study is carried out by varying the thickness and Young’s modulus (E) of the interlayer under two different blast loads. Results indicate the existence of a critical interlayer thickness (or E) that causes the onset of interlayer failure. This should be achieved in the design to enhance energy absorption, reduce support reactions and initiate a safer failure mode. Present findings provide information to achieve such design targets and enable safe and efficient performance of LGs under credible blast loads.

Genetic evidence for natural hybridization between Red Snow Crab (Chionoecetes japonicus) and Snow Crab (Chionoecetes opilio) in Korea

Both red snow crab (Chionoecetes japonicus Rathbun, 1932) and snow crab (Chionoecetes opilio Fabricius, 1788) are commercially important species in Korea. The geographical ranges of the two species overlap in the East Sea, where both species are fished commercially. Morphological identification of the two species and putative hybrids can be difficult because of their overlapping morphological characteristics. The presence of putative hybrids can affect the total allowable catch (TAC) of C. japonicus and C. opilio, and causes problems managing C. japonicus and C. opilio wild resources. To date, however, no natural hybridization has been reported between C. japonicus and C. opilio, despite their overlapping distributions along the coast of the East Sea. In this study, the internal transcribed spacer (ITS) region of major ribosomal RNA genes from the nuclear genome and the cytochrome oxidase I (CO I) gene from the mitochondrial genome were sequenced to determine whether natural hybridization occurs between the two species. Our results revealed that all putative hybrids identified using morphological traits had two distinct types of ITS sequences corresponding to those of both parental species. Mitochondrial CO I gene sequencing showed that all putative hybrids had sequences identical to C. japonicus. A genotyping assay based on single nucleotide polymorphisms in the ITS1 region and the CO I gene produced the most efficient and accurate identification of all hybrid individuals. Molecular data clearly demonstrate that natural hybridization does occur between C. japonicus and C. opilio, but only with C. japonicus as the maternal parent.

Transferability of cupped oyster EST (Expressed Sequence Tag)-derived SNP (Single Nucleotide Polymorphism) markers to related crassostrea and ostrea species

Single nucleotide polymorphisms (SNPs) are widely acknowledged as the marker of choice for many genetic and genomic applications because they show co-dominant inheritance, are highly abundant across genomes and are suitable for high-throughput genotyping. Here we evaluated the applicability of SNP markers developed from Crassostrea gigas and C. virginica expressed sequence tags (ESTs) in closely related Crassostrea and Ostrea species. A total of 213 putative interspecific level SNPs were identified from re-sequencing data in six amplicons, yielding on average of one interspecific level SNP per seven bp. High polymorphism levels were observed and the high success rate of transferability show that genic EST-derived SNP markers provide an efficient method for rapid marker development and SNP discovery in closely related oyster species. The six EST-SNP markers identified here will provide useful molecular tools for addressing questions in molecular ecology and evolution studies including for stock analysis (pedigree monitoring) in related oyster taxa.

Co-and Ca-phosphate-based catalysts for the depolymerization of organosolv eucalytpus lignin

Depolymerization of purified organosolv eucalyptus wood lignin by the heterogeneous catalysts, cobalt polyphosphate (CoP2O6) and calcium phosphate (β-CaP2O6) was investigated. A total syringol yield of 16.7% was achieved with β-CaP2O6 in a methanol/water (50/50, wt/wt) solvent system after depolymerization at 300 ºC for 1 h, showing selectivity of the catalyst.

Nanosheets Co3O4 interleaved with graphene for highly efficient oxygen reduction

Efficient yet inexpensive electrocatalysts for oxygen reduction reaction (ORR) are an essential component of renewable energy devices, such as fuel cells and metal-air batteries. We herein interleaved novel Co3O4 nanosheets with graphene to develop a first ever sheet-on-sheet heterostructured electrocatalyst for ORR, whose electrocatalytic activity outperformed the state-of-the-art commercial Pt/C with exceptional durability in alkaline solution. The composite demonstrates the highest activity of all the nonprecious metal electrocatalysts, such as those derived from Co3O4 nanoparticle/nitrogen-doped graphene hybrids and carbon nanotube/nanoparticle composites. Density functional theory (DFT) calculations indicated that the outstanding performance originated from the significant charge transfer from graphene to Co3O4 nanosheets promoting the electron transport through the whole structure. Theoretical calculations revealed that the enhanced stability can be ascribed to the strong interaction generated between both types of sheets.

Managing mental health co-morbidities in hepatitis C: A systematic review of clinical guidelines

BACKGROUND Mental health co-morbidities are prevalent in hepatitis C (HCV), and in practice often considered a contraindication for initiation of treatment. A systematic review was conducted to explore whether and how current HCV clinical practice guidelines address pre-existing mental health co-morbidities. METHODS A review of the literature was undertaken to identify guidelines for the management of HCV, published in English, between 2002 and January 2015. Characteristics of the guidelines were recorded and key themes on mental health were summarized across predefined stages in the patient journey (diagnosis, pre-HCV drug therapy, on HCV drug therapy, post-HCV drug therapy, advanced disease or palliative care). RESULTS Twenty-five HCV clinical guidelines were included. Referral to psychiatrist is generally recommended as pre- and in-treatment assessment of mental health co-morbidities but HCV guidelines do not offer explicit instructions on how to manage mental health co-morbidities. Post-treatment assessment of mental health co-morbidities were lacking. Conclusions Current chronic HCV clinical guidelines are limited in their advice to clinicians regarding the management of mental health co-morbidities.

Delay tolerant routing protocols for energy-neutral animal tracking

This paper investigates communication protocols for relaying sensor data from animal tracking applications back to base stations. While Delay Tolerant Networks (DTNs) are well suited to such challenging environments, most existing protocols do not consider the available energy that is particularly important when tracking devices can harvest energy. This limits both the network lifetime and delivery probability in energy-constrained applications to the point when routing performance becomes worse than using no routing at all. Our work shows that substantial improvement in data yields can be achieved through simple yet efficient energy-aware strategies. Conceptually, there is need for balancing the energy spent on sensing, data mulling, and delivery of direct packets to destination. We use empirical traces collected in a flying fox (fruit bat) tracking project and show that simple threshold-based energy-aware strategies yield up to 20% higher delivery rates. Furthermore, these results generalize well for a wide range of operating conditions.

Visible-light-induced click chemistry

A rapid and catalyst-free cycloaddition system for visible-light-induced click chemistry is reported. A readily accessible photoreactive 2H-azirine moiety was designed to absorb light at wavelengths above 400 nm. Irradiation with low-energy light sources thus enables efficient small-molecule synthesis with a diverse range of multiple-bond-containing compounds. Moreover, in order to demonstrate the efficiency of the current approach, quantitative ligation of the photoactivatable chromophore with functional polymeric substrates was performed and full conversion with irradiation times of only 1 min at ambient conditions was achieved. The current report thus presents a highly efficient method for applications involving selective cycloaddition to electron-deficient multiple-bond-containing materials.

Co-benefits of addressing climate change can motivate action around the world

Personal and political action on climate change is traditionally thought to be motivated by people accepting its reality and importance. However, convincing the public that climate change is real faces powerful ideological obstacles1, 2, 3, 4, and climate change is slipping in public importance in many countries5, 6. Here we investigate a different approach, identifying whether potential co-benefits of addressing climate change7 could motivate pro-environmental behaviour around the world for both those convinced and unconvinced that climate change is real. We describe an integrated framework for assessing beliefs about co-benefits8, distinguishing social conditions (for example, economic development, reduced pollution or disease) and community character (for example, benevolence, competence). Data from all inhabited continents (24 countries; 6,196 participants) showed that two co-benefit types, Development (economic and scientific advancement) and Benevolence (a more moral and caring community), motivated public, private and financial actions to address climate change to a similar degree as believing climate change is important. Critically, relationships were similar for both convinced and unconvinced participants, showing that co-benefits can motivate action across ideological divides. These relationships were also independent of perceived climate change importance, and could not be explained by political ideology, age, or gender. Communicating co-benefits could motivate action on climate change where traditional approaches have stalled.