Application of encapsulated nisin and sodium citrate for shelf life increasing of Rainbow trout (Onchorhynchus mykiss) fillet packaged with MAP and their effect on Staphylococcus aureus

Nisin is a widely used naturally occurring antimicrobial effective against many pathogenic and spoilage microorganisms. It has been proposed that reduced efficacy of nisin in foods can be improved by technologies such as encapsulation to protect it from interferences by food matrix components. The aim of this study was using of spray dried encapsulated nisin with zein in concentration of (0.15 and 0.25 g/kg) and sodium citrate (1.5 and 2.5%) and treatments with both of them to extent the shelf life of filleted trouts packaged by Modified Atmosphere Packaging (45% CO2, 50% N2 ,5% O2) and stored at 4±1 °C for 20 days. Furthermore, to evaluate the antimicrobial efficiency of encapsulated nisin and soudium citrate the trouts fillets was inoculated with Staphylococcus aureus as an index pathogenic bacteria. Assessment of chemical spoilage indexes such as (Proxide value, Thiobarbituric acid, total volatile base nitrogen and pH) , microbial parameters (Total Plate Count, Psychrotrophic count, Lactic acid bacteria count), Staphylococcus aureus cont in treatments which were inoculated with 5 logcfu/g of this bacteria and sensory evaluation of fillets including (smell, color, texture and total acceptability) was carried out in days of 0, 4, 8, 12, 16 and 20. The results revealed that treatment with both exposure of nisin and sodium citrate showed significantly lower chemical spoilage indexes in comparison with controls (vaccum packed and MAP) (P<0.05). Furthermore, (nisin 0.25 g/kg sodium citrate 2.5%) treatment which was exposed to the maximal level used of both materials was significantly the lowest treatment with (Proxide value, Thiobarbituric acid, total volatile base nitrogen and pH) of 9.95 (meq O2/kg) , 1.55 (mgMA/kg), 29.65 (mgN/100g) and 6.65 , respectively and according to the maximal recommended level of this indices , shelf life of fillets in this treatment was esstimated 20 days.The control (vaccum packed) treatment was significantly the highest treatment with (Proxide value, Thiobarbituric acid, total volatile base nitrogen and pH) of 15.17 (meq O2/kg), 3.03 (mgMA/kg), 38.4 (mgN/100g) and 6.95 , respectively and according to the maximal recommended level of this indices , shelf life of fillets in this treatment was estimated 11 days. Also, in microbial point of view (nisin 0.25 g/kg- sodium citrate 2.5%) treatment was the lowest treatment with Total Plate Count, Psychrotrophic count, Lactic acid bacteria count and Staphylococcus aureus count of 6.7, 6.83, 5.25 and 6.04 logcfu/g respectively, and conrol (vaccum packed) treatment was the highest treatment with 9.15, 9.41, 7.7 and 9.01 logcfu/g respectively. According to the lower results of chemical and microbial indices and higher sensory evaluated scores assessed in this research for encapsulated nisin in comparison with free nisin , it was concluded that encapsulation of nisin with zein capsules may improve the efficiency of nisin. The measuremented values of Mass yield, Total solids content of capsules, Encapsulation efficiency, In vitro release kinetics in 200 hour for encapsulated nisin in this study was 49.89, 62, 98.31 and 69% respectively and Encapsulated particle size was lower than 674.21 μm for 90% of particles. As a consequence, nisin , in particular encapsulated nisin, and sodium citrate alone or together with and Modified Atmosphere packaging might be considered as effective tools in preventing the quality degradation of the fillets, resulting in an extension of their shelf life.

Cryopreservation of cynomolgus monkey (Macaca fascicularis) spermatozoa in a chemically defined extender

Aim: To establish a method for cynomolgus monkey sperm cryopreservation in a chemically defined extender. Methods: Semen samples were collected by electro-ejaculation from four sexually mature male cynomolgus monkeys. The spermatozoa were frozen in straws by liquid nitrogen vapor using egg-yolk-free Tes-Tris (mTTE) synthetic extender and glycerol as cryoprotectant. The effects of glycerol concentration (1%,3%, 5%, 10% and 15% [v/v]) and its equilibration time (10 min, 30 min, 60 min and 90 min) on post-thaw spermatozoa were examined by sperm motility and sperm head membrane integrity. Results: The post-thaw motility and head membrane integrity of spermatozoa were significantly higher (P < 0.05) for 5% glycerol (42.95 +/- 2.55 and 50.39 +/- 2.42, respectively) than those of the other groups (1%: 19.19 +/- 3.22 and 24.84 +/- 3.64; 3%: 34.23 +/- 3.43 and 41.37 +/- 3.42; 10%: 15.68 +/- 2.36 and 21.39 +/- 3.14; 15%: 7.47 +/- 1.44 and 12.90 +/- 2.18). The parameters for 30 min equilibration (42.95 2.55 and 50.39 2.42) were better (P < 0.05) than those of the other groups (10 min: 31.33 +/- 3.06 and 38. 98 +/- 3.31; 60 min: 32.49 +/- 3.86 and 40.01 +/- 4.18; 90 min: 31.16 +/- 3.66 and 38.30 +/- 3.78). Five percent glycerol and 30 min equilibration yielded the highest post-thaw sperm motility and head membrane integrity. Conclusion: Cynomolgus monkey spermatozoa can be successfully cryopreserved in a chemically defined extender, which is related to the concentration and the equilibration time of glycerol.

Reproductive physiology of ribbon fish (Trichiurus lepturus)

The ribbon fishes ‘of the family Trichiuridac are represented as one of the most important food resources in Indian ocean. High density of the dominant species of ribbon fish (Trichiurus lepturus) in Oman sea and the 'Tillable catch in last yeas (more than 7000 tones per year) makes a trust area for studing their population biolog and stock assessment. As our knowledge on reproductive biology of this species has an important role on their fisheries management, as well as conservation of this stock from decline or over fishing, this research was held to determine some aspects of reproductive physiology of ribbon fish and the effects of environmental factors in gonadal cycle. The goals of the present thesis is to determine some aspects of reproductive physiology such as gonadosomatic index (GSI) , hepatosomatic index (HSI), condition factor (Ko, fecundity, sex ratio, size at first maturity, size at maturity (LM5O) and their relative hormonal & biochemical fluctuations. In this regards annual variation of sex hormones ic. estradiol 17-B, progestron, cortisol, testostrone and gonadotropins FSH (GTH-I) , LH (GTH-ll)I were measured ; gonadal histological studies were done by light & electron micrography. The research was carried out from April 1995 to January 19% in Ras Nleidani in the north part of Oman sea, and the environmental factors such as temperature, salinity, oxygen, rainfall and pH were measured. The effects of these parameters on reproductive cycle and hormonal fluctuationswere discussed by using correlation and principle component analysis (PCA). Female Ribbon fish reproductive strategy shows the same paterns of nonguarder marine teleosts. T. lepturus has more than one spawning season (existance of egges in different size in each month) and therfore it must have asynchronous ovaries and belong to continious spawners. GSI and HSI are good evidences for this type of reproductive patern. The testis of the lobular type , which is typical of most teleosts , is composed of numerous lobules which are separated from each other by a thin layer of fibrous connective tissue. GSI fluctuations revealed prolong- spawning time in males. There is significant increase in 17-13 estradiol. progestrone , cortisol and gonadotropins with maturity and prespawning period of female T lepturus. Plasma concentration of E2 and GTH II incresaed along with water temperature increasing (3300).. Spawning was observed from Nov. 1995 to Apr. 1996 in this species. Progestrone increased significantly with increasing rainfall in this season (P<0.01). Plasma cortisol levels increased with maturation and vitelpgenesis and also with the peak of spawning. From lenght-weight frequency and size distribution in each age groups and also minimum size at first maturity (52a cm) it would he concluded that T. lepturus must be matured at 2 years of age. Serum cholestrol and triglicerides significantly increased when maturation occured in this species. The relationship between alkaline phosphatase activity and hormonal fluctuations with maturity and vitelogenesis were discussed. Proximate compostion (muscle) shows significant variation with spawning period and maturity. Absolute individual fecundity (17420-159150) increased with body length and weight. Ultrastructural observations show dramatic variation in cell membrane (0ocyte membrane), yolk vesicles and, nucleolus dispersal in relation to maturity stages. fluctuations of gonadal hormones were discused in relation with vitelogenesis. Testosterone increased in males from Nov: to Mar. due to environmental impacts and spawning time. Sex ratio in different depth (10-40 m ,80-110 m) shows significnt differences in this ratio for two depths. In 10-40 m depth female shows dominant abundance to male in each months that may be due to their reproductive migration behaviour. The effects of temperature photoperiod and rainfall to maturity and spawning were discussed. According to -pawning period of T. leptunts in our sampling area it could be suggested that ribbon fish fi,theries must be restricted in the peak of spawning seasons (Feb. to Mar.) and in the spawning grounds (under 40 m depths). Other suggestions for population conservation have been mentioned.

Thickness control of Molecular Beam Epitaxy grown layers at the 0.01-0.1 monolayer level

Electron tunnelling through semiconductor tunnel barriers is exponentially sensitive to the thickness of the barrier layer, and in the most common system, the AlAs tunnel barrier in GaAs, a one monolayer variation in thickness results in a 300% variation in the tunnelling current for a fixed bias voltage. We use this degree of sensitivity to demonstrate that the level of control at 0.06 monolayer can be achieved in the growth by molecular beam epitaxy, and the geometrical variation of layer thickness across a wafer at the 0.01 monolayer level can be detected.

Microwave characterization of multi-walled carbon nanotube arrays

A vertically aligned multi-walled carbon nanotube (VACNT) film has been characterized by rectangular waveguide measurements. The complex scattering parameters (S-parameters) are measured by a vector network analyzer at X-band frequencies. The effective complex permittivity and permeability of the VACNT film have been extracted using the Nicolson-Ross-Weir (NWR) approach. The extracted parameters are verified by full wave simulations (CST Microwave Studio) and very good agreement has been obtained. A systematic error analysis is presented and the errors are within the acceptable range. The performance of VACNT films as an absorber is examined, and comparison with the conventional carbon loaded materials shows that a 90% size reduction is possible whilst maintaining the same absorption level. © 2011 EUROPEAN MICROWAVE ASSOC.

Dynamic compressive response of composite square honeycombs

Carbon fibre-epoxy composite square honeycombs, and the parent composite material, were tested in quasi-static compression at a strain rate of 10 -3 s -1 and in dynamic compression at strain rates of 10 3-10 4 s -1 using an instrumented Kolsky bar arrangement. Taken together, these tests provide an assessment of the potential of this composite topology for use as a lightweight sandwich core. The honeycombs had two relative densities, 0.12 and 0.24, and two material orientations, ±45° and 0/90° with respect to the prismatic, loading direction of the honeycomb. Honeycomb manufacture was by slotting, assembling and bonding together carbon fibre/epoxy woven plies of composite sheets of 2 × 2 twill weave construction. The peak value of wall stress in the honeycombs was about one third that of the parent material, for all strain rates. An elastic finite element analysis was used to trace the source of this knock-down in strength: a stress concentration exists at the root of the slots and leads to premature failure by microbuckling. Shock-wave effects were evident at impact velocities exceeding 50 ms -1 for the honeycomb of relative density 0.12. This was traced to stubbing of the buckled cell walls against the face of the Kolsky bar. © 2011 Elsevier Ltd. All rights reserved.

The deposition of small particles from a turbulent air flow in a curved duct

The paper describes an experimental and theoretical study of the deposition of small spherical particles from a turbulent air flow in a curved duct. The objective was to investigate the interaction between the streamline curvature of the primary flow and the turbulent deposition mechanisms of diffusion and turbophoresis. The experiments were conducted with particles of uranine (used as a fluorescent tracer) produced by an aerosol generator. The particles were entrained in an air flow which passed vertically downwards through a long straight channel of rectangular cross-section leading to a 90° bend. The inside surfaces of the channel and bend were covered with tape to collect the deposited particles. Following a test run the tape was removed in sections, the uranine was dissolved in sodium hydroxide solution and the deposition rates established by measuring the uranine concentration with a luminescence spectrometer. The experimental results were compared with calculations of particle deposition in a curved duct using a computer program that solved the ensemble-averaged particle mass and momentum conservation equations. A particle density-weighted averaging procedure was used and the equations were expressed in terms of the particle convective, rather than total, velocity. This approach provided a simpler formulation of the particle turbulence correlations generated by the averaging process. The computer program was used to investigate the distance required to achieve a fully-developed particle flow in the straight entry channel as well as the variation of the deposition rate around the bend. The simulations showed good agreement with the experimental results. © 2012 Elsevier Ltd.

Use of automatic sand pourers for loose sand models

The consistency of laboratory sand model preparation for physical testing is a fundamental criterion in representing identical geotechnical issues at prototype scale. This objective led to the development of robotic apparatus to eliminate the non-uniformity in manual pouring. Previous studies have shown consistent sand models with high relative density between 50 to 90% produced by the automatic moving-hopper sand pourer at the University of Cambridge, based primarily on a linear correlation to flow rate. However, in the case of loose samples, the influence of other parameters, particularly the drop height, becomes more apparent. In this paper, findings on the effect of flow rate and drop height are discussed in relation to the layer thickness and relative density of loose sand samples. Design charts are presented to illustrate their relationships. The effect of these factors on different sand types is also covered to extend the use of the equipment. © 2010 Taylor & Francis Group, London.

A microbeam RBS analysis of low temperature direct-write inkjet deposited copper

Quantitative microbeam Rutherford backscattering (RBS) analysis with a 1.5 MeV 4He+ beam has determined limits on the purity of copper deposited on glass with a novel inkjet process. A tetravinyl silane tetrakisCu(I) 1,1,1,5,5,5-hexafluoroacetylacetonate (TVST[Cu]hfac) complex was heated to 70 °C and jetted onto the glass substrate through a piezoelectric ceramic print head in droplets about 0.5 mm diameter. The substrate temperature was 150 °C. Solid well-formed deposits resulted which have a copper content greater than about 90% by weight. The RBS spectra were analysed objectively using the DataFurnace code, with the assumption that the deposit was CuOx, and the validity of different assumed values of x being tested. The assumptions and the errors of the analysis are critically evaluated. © 2002 Elsevier Science B.V. All rights reserved.

Long-term performance of cement-bentonite containment wall

The paper presents hydraulic conductivity, unconfined compression strength (UCS) and triaxial test results of an 11 year old slag-cement-bentonite (CB) cut-off wall material and identifies factors affecting their long-term performance. The laboratory tests were performed on three types of CB samples ranging from contaminated block field samples to uncontaminated laboratory cast samples. The results showed that hydraulic conductivity reduces till 3 years and UCS increases till 90 days, but there after it remains constant till 11 years of age. The mean hydraulic conductivity and UCS values of block field samples are inferior and have large variability than laboratory cured samples. Such variations are mainly because of heterogeneity caused by aggressive environment and impurities within the specimen. Consolidated undrained triaxial test found that under an effective confining pressure of less than 200 kPa, tension failure occurred since the minor principal stress dropped to zero value at failure. The research outcome is useful for understanding future liability of CB wall and improving their design. © 2009 IOS Press.

Micro-electro-mechanical resonant tilt sensor

This paper reports a micro-electro-mechanical tilt sensor based on resonant sensing principles. The tilt sensor measures orientation by sensing the component of gravitational acceleration along a specified input axis. Design aspects of the tilt sensor are first introduced and a design trade-off between sensitivity, resolution and robustness is addressed. A prototype sensor is microfabricated in a foundry process. The sensor is characterized to validate predictive analytical and FEA models of performance. The prototype is tested over tilt angles ranging over ±90 degrees and the linearity of the sensor is found to be better than 1.4% over the tilt angle range of ±20°. The noise-limited resolution of the sensor is found to be approximately 0.00026 degrees for an integration time of 0.6 seconds. © 2012 IEEE.

Multimode 90°-crossings, combiners and splitters for a polymer-based on-board optical bus

The design and characterization of polymer-based multimode 90°-crossings, combiners and splitters exhibiting excess losses below 0.1 dB/crossing, 2 dB and 3 dB respectively are reported. The devices enable the realization of an on-board optical bus. © 2012 OSA.

One-pot synthesis of intercalating ZnO nanoparticles for enhanced dye-sensitized solar cells

In this letter we report a facile one-pot synthesis of intercalated ZnO particles for inexpensive, low-temperature solution processed dye-sensitised solar cells. High interconnectivity facilitates enhanced charge transfer between the ZnO nanoparticles and a consequent enhancement in cell efficiency. ZnO thin films were formed from a wide range of nanoparticle diameters which simultaneously increased optical scattering whilst enhancing dye loading. A possible growth mechanism was proposed for the synthesis of ZnO nanoparticles. The intercalated ZnO nanoparticle thin films were integrated into the photoanodes of dye-sensitised solar cells which showed an increase in performance of 37% compared to structurally equivalent cells employing ZnO nanowires. © 2012 Elsevier B.V.

基于人工湿地的循环水产养殖系统工艺设计及净化效能

该研究首次将复合垂直流人工湿地同池塘养殖结合,通过构建养殖-湿地生态系统,验证人工湿地对水产养殖用水和废水净化与回用的可行性。近9个月的新建人工湿地运行结果表明,水力负荷从313、469、625 mm/d增加到781mm/d,人工湿地对TSS、CODC r和BOD5去除率的变动范围分别为80.5%~82.9%、45.2%~64.2%和61.0%~77.0%,对NH4+-N、NO3--N、TN去除率的变动范围分别为51.5%~67.8%-、90.6%~40.0%和29.1%~68.6%,对TP和IP的去除率

黄颡前驼形线虫发生和成熟的季节动态

报道了寄生于黄颡鱼(Pelteobagrus fulvidraco)胃、肠中的黄颡前驼形线虫(Procamallanus fulvidraconis)的成熟和感染丰度的季节动态。从2001年2月到2002年7月的18个月中,对来自于湖北省梁子湖的900尾黄颡鱼进行了调查,结果表明:该线虫的感染率除在2002年1月比较低(32%)外,其他月份都在90%以上,且没有显著的季节性变化(G=16.96F0.01[17,882]=1.98)。在对黄颡前驼形线虫雌虫成虫的三个阶段(成熟期、怀卵期和怀幼期)和雄虫成虫的