Effects of timing of induced luteolysis in embryo donor mares on reproductive performance and pregnancy rate in recipient mares

The objective was to evaluate the effects of giving prostaglandin F(2 alpha) (PGF) to donor mares 48 h prior to embryo collection. Non-lactating donor mares (n = 20 estrous cycles in 10 mares), ranging from 2.5 to 10 y of age and 400 to 500 kg of body weight were used from September 2004 to February 2005 in the southern hemisphere (Brazil). Donor mares were randomly assigned in a cross-over design study. During a Treated cycle, 7.5 mg PGF was given 48 h prior to embryo collection, whereas in the Control cycle, 7.5 mg PGF was given at embryo collection. In Treated Cycles, serum progesterone concentrations decreased between the day of PGF treatment and the day of embryo collection (13.9 +/- 5.4 and 0.5 +/- 0.3 ng/mL, respectively; P < 0.05). In Treated versus Control cycles, the interovulatory interval was shorter (14.9 +/- 0.9 vs 17.5 +/- 1.1 d, P < 0.05). However, there was no significant difference between these groups for the interval from PGF to ovulation (average, 9.8 d), embryo recovery rate (average, 75%), embryo quality, uterine protein concentration, and pregnancy rate in recipient mares (average, 87% at 15 d after ovulation, with no pregnancy loss detected by 60 d). In conclusion, giving donor mares PGF 48 h prior to embryo collection reduced the average interovulatory interval by approximately 2.5 d, thereby potentially increasing the numbers of embryos that could be collected during a breeding season, with no deleterious effects on embryo recovery rate, embryo quality, or pregnancy rate in recipient mares. (c) 2011 Elsevier B.V. All rights reserved.

Prevalência de Demodex folliculorum e Demodex brevis em uma amostra da população de Botucatu, São Paulo, Brasil.

A survey was conducted to determine the prevalence of D. folliculorum and D. brevis for the first time in Brazil. In this study, association between the presence of mites and host factors (age, sex and race) were analysed. Samples were obtained from 100 individuals submitted to a facial cleaning in an aesthetic clinic in Botucatu city. All the samples were mounted in Berlese's medium and examined by dark-field phase microscopy. From 100 studied individuals, 72 were positive, among the positive cases, 51% showed D. folliculorum, 2% showed D. brevis and 19% both species. The parasite distribution in relation to sex was not taken in account because the sex ratio favoured females (90%). According to age, prevalence was high in all age groups. The factors influencing this distribution could be due. 1. the examination of extensive skin areas, 2. the group examined composed of individuals in treatment in an anaesthetic clinic could be more infested than a normal population, 3. the fact that in tropics, the prevalence is often high in all ages.

Modulational instability analysis of surface-waves in the Bénard-Marangoni phenomenon

By using the long-wave approximation, a system of coupled evolutions equations for the bulk velocity and the surface perturbations of a Bénard-Marangoni system is obtained. It includes nonlinearity, dispersion and dissipation, and it is interpreted as a dissipative generalization of the usual Boussinesq system of equations. Then, by considering that the Marangoni number is near the critical value M = -12, we show that the modulation of the Boussinesq waves is described by a perturbed Nonlinear Schrödinger Equation, and we study the conditions under which a Benjamin-Feir instability could eventually set in. The results give sufficient conditions for stability, but are inconclusive about the existence or not of a Benjamin-Feir instability in the long-wave limit. © 1995.

Influência de herbicidas em macrófitas aquáticas

The effects of the herbicides atrazine, 2,4-D, glyphosate (direct and rodeo) and trifluralin were determined on the growth and death of fronds of the aquatic macrophytes Spirodela punctata (G.F.W. Meyer) Thompson and Salvinia minima Baker, through three series of concentrations of each herbicide in climatic chamber (3000 lux, 12/12 hours photoperiod, temperature 23 ± 1°C). After seven days, the concentrations of series 1 (0.025, 0.125, 0.625 and 3.125 mg.L -1) inhibited the growth of Salvinia minima. In Spirodela punctata, only the herbicides rodeo and trifluralin caused growth inhibition. These concentrations did not caused death of fronds in the species. The concentrations of series 2 (40, 60, 80 and 100 mg.L -1) of the herbicides 2,4-D, direct e trifluralin decreased growth of Salvinia minima; death of fronds was caused by 2,4-D and trifluralin to Salvinia minima, and by direct and trifluralin to Spirodela punctata. For the series 3 (200, 400, 600, 800 and 1000 mg.L -1), the herbicide 2,4-D caused growth decrease of both species. The herbicides rodeo and trifluralin showed to be the most lethal for both species. The herbicide atrazine caused death of fronds in Spirodela punctata.

Can one cure the nonunitarity of three-dimensional quadratic gravity using a topological Chern-Simons term?

Quadratic gravity in (2+1)D is nonunitarity at the tree level. When a topological Chern-Simons term is added to this theory, the harmless massive scalar mode of the former gives rise to a troublesome massive spin-0 ghost, while the massive spin-2 ghost is replaced by two massive physical particles both of spin-2. Therefore, unlike what it is claimed in the literature, quadratic Chern-Simons gravity in (2+1)D is nonunitary at the tree level. © 2004 Published by Elsevier B.V.

The no-central chi-square chart with two-stage samplings

Throughout this article, it is assumed that the no-central chi-square chart with two stage samplings (TSS Chisquare chart) is employed to monitor a process where the observations from the quality characteristic of interest X are independent and identically normally distributed with mean μ and variance σ2. The process is considered to start with the mean and the variance on target (μ = μ0; σ2 = σ0 2), but at some random time in the future an assignable cause shifts the mean from μ0 to μ1 = μ0 ± δσ0, δ >0 and/or increases the variance from σ0 2 to σ1 2 = γ2σ0 2, γ > 1. Before the assignable cause occurrence, the process is considered to be in a state of statistical control (defined by the in-control state). Similar to the Shewhart charts, samples of size n 0+ 1 are taken from the process at regular time intervals. The samplings are performed in two stages. At the first stage, the first item of the i-th sample is inspected. If its X value, say Xil, is close to the target value (|Xil-μ0|< w0σ 0, w0>0), then the sampling is interrupted. Otherwise, at the second stage, the remaining n0 items are inspected and the following statistic is computed. Wt = Σj=2n 0+1(Xij - μ0 + ξiσ 0)2 i = 1,2 Let d be a positive constant then ξ, =d if Xil > 0 ; otherwise ξi =-d. A signal is given at sample i if |Xil-μ0| > w0σ 0 and W1 > knia:tl, where kChi is the factor used in determining the upper control limit for the non-central chi-square chart. If devices such as go and no-go gauges can be considered, then measurements are not required except when the sampling goes to the second stage. Let P be the probability of deciding that the process is in control and P 1, i=1,2, be the probability of deciding that the process is in control at stage / of the sampling procedure. Thus P = P1 + P 2 - P1P2, P1 = Pr[μ0 - w0σ0 ≤ X ≤ μ0+ w 0σ0] P2=Pr[W ≤ kChi σ0 2], (3) During the in-control period, W / σ0 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ0 = n0d2, i.e. W / σ0 2 - xn0 22 (λ0) During the out-of-control period, W / σ1 2 is distributed as a non-central chi-square distribution with n0 degrees of freedom and a non-centrality parameter λ1 = n0(δ + ξ)2 / γ2 The effectiveness of a control chart in detecting a process change can be measured by the average run length (ARL), which is the speed with which a control chart detects process shifts. The ARL for the proposed chart is easily determined because in this case, the number of samples before a signal is a geometrically distributed random variable with parameter 1-P, that is, ARL = I /(1-P). It is shown that the performance of the proposed chart is better than the joint X̄ and R charts, Furthermore, if the TSS Chi-square chart is used for monitoring diameters, volumes, weights, etc., then appropriate devices, such as go-no-go gauges can be used to decide if the sampling should go to the second stage or not. When the process is stable, and the joint X̄ and R charts are in use, the monitoring becomes monotonous because rarely an X̄ or R value fall outside the control limits. The natural consequence is the user to pay less and less attention to the steps required to obtain the X̄ and R value. In some cases, this lack of attention can result in serious mistakes. The TSS Chi-square chart has the advantage that most of the samplings are interrupted, consequently, most of the time the user will be working with attributes. Our experience shows that the inspection of one item by attribute is much less monotonous than measuring four or five items at each sampling.

Interaction between total-etch and self-etch adhesives and conventional and self-adhesive resin cements

The aim of this study was to compare the bond strength to enamel between resin cements combined with total-etch and self-etch adhesive systems and a self-adhesive cement. Eighty bovine incisors had their buccal surface ground flat exposing a plane area in the enamel. Eighty Artglass resin cylinders measuring 3 mm in diameter and 4 mm in height were fabricated. The teeth were divided into eight groups of 10 teeth each and the resin cylinders were cemented with different adhesive systems and resin cements; G1: RelyX Unicem (self-adhesive cement); G2: H 3PO 4 + Single Bond + RelyX ARC; G3: AdheSE + Variolink II; G4: H 3PO 4 + Excite + Variolink II; G5: Xeno III + Enforce; G6: H 3PO 4 + Prime&Bond NT + Enforce; G7: Biatite Primers 1 and 2 + Bistite II DC; G8: H 3PO 4 + Bistite Primers 1 and 2 + Bistite II DC. After application of the adhesives, the cylinders were cemented according to manufacturer instructions. The specimens were submitted to 2000 thermal cycles at a temperature ranging from 5±5°C to 55±5°C, and shear bond strength was then tested at a variety of 1 mm/min. The data were analyzed by ANOVA and the Tukey's test (á=5%), obtaining a p value of 0.00. The following mean (±standard deviation) bond strength values were observed for each group: G1: 5.14(±0.99)a; G3: 16.23(±4.69)b; G7: 17.82(±3.66)b; G5: 18.48(±2.88)bc; G8: 20.15(±4.12)bc; G4: 22.85(±3.08)cd; G2: 24.96(±2.89)d; G6: 26.07(±1.69)d. Groups followed by the same letters did not differ significantly. For most of the resin cements tested, the application of adhesive systems using acid etching resulted in a higher bond strength when compared to the self-etch adhesive systems and to the self-adhesive cement.

L'objetif du millénaire de réduire la pauvreté en Amérique latine et dans les Caraïbes

Inclut la bibliographie

Bone mineral density on conventional and digitized images under different parameters of digitization and storage

Aim: To assess the bone mineral density on conventional and digitized images, comparing whether different parameters of digitization and storage change these values. Methods: Twenty radiographs were taken from five partially dentulous dry mandibles with an aluminum 7-mm stepwedge placed on the superior edge of the film. After processing, the films were digitized with a resolution of 600 and 2,400 d.p.i. and saved as TIFF and JPEG files. On every conventional and digitized image, circular regions of interest were selected for densitometry and radiographic contrast analysis. Results: Pearson's correlation coefficient showed a significant and strong mean gray values association between digitized and conventional images, differing from radiographic contrast that did not show a significant association. ANOVA did not reveal a statistically significant difference in bone density and radiographic contrast among the four digitized image groups, but the conventional image contrast was significantly lower. Conclusions: Bone mineral density did not differ in both conventional and digitized images. The parameters of image compression and resolution, tested in this study, did not change the results of densitometry and digitization process increased the radiographic contrast.

Dessecação de Crotalaria juncea no outono

The objective of this study was to evaluate the effect of glyphosate applied alone and in mixtures with 2.4-D or metsulfuron methyl in the desiccation of mature plants of Crotalaria juncea during the fall season, in a field crop. Two experiments were carried out using a randomized experimental block design, in a 4 × 3 factorial scheme, with four replications. Treatments in the first experiment were formed by four doses (0.00, 0.54, 1.08 and 1.62 kg ha -1) of glyphosate, associated with three doses (0.00, 0.806 and 1.209 kg ha -1) of 2 , 4-D. In the second experiment the same doses of glyphosate were studied associated with three doses (0.0 4.0 and 8.0 g ha -1) of metsulfuron-methyl. Visual evaluations of plant poisoning, score number of plants with regrowth and dry matter of plants were determined. It was concluded that glyphosate applied alone or in association with 2.4-D or metsulfuron-methyl, regardless of the applied doses, was ineffective in the desiccation of mature plants of Crotalaria juncea.

Tolerância de Espécies de Mucuna a Herbicidas Utilizados na Cultura da Cana-de-Açúcar

The emergence of Mucuna species in sugarcane plantations, even after herbicide spraying for weed management, allowed us to elaborate the hypothesis that these plants are tolerant to the herbicides commonly used in the culture. Thus, to prove this hypothesis, this work was carried out to study the tolerance of Mucuna aterrima, Mucuna cinerea and Mucuna deeringiana to application of herbicides with different mechanisms of action in pre- and postemergence. The experiment was arranged in a randomized block design with 9 treatments and five replications in a factorial 3 × 3, plus controls. At pre-emergence, the first factor was constituted by the herbicides sulfentrazone (800 g ha-1), imazapic (245 g ha-1), and amicarbazone (1,400 g ha-1), and the second factor by the Mucuna species, besides the additional control for each species studied. At post- emergence, the herbicides tested were clomazone (1,100 g ha-1), ametryn+trifloxysulfuronsodium (1,463 + 37 g ha-1), and 2,4-D (1,209 g ha-1). In the chemical management at pre-emergence, the species were sensitive to amicarbazone, followed by sulfentrazone, and tolerant to imazapic. At post-emergence, all species were sensitive to ametryn + trifloxysulfuron-sodium and 2,4-D, but tolerant to clomazone.

Intervalos de chuva na eficiência de herbicidas aplicados em pós-emergência

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da cultura do milho e da decomposição da palhada submetida à Hormesis

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Educação científica, CTSA e ensino de física: contribuições ao aperfeiçoamento de situações de aprendizagem sobre entropia e degradação de energia

Pós-graduação em Educação para a Ciência - FC

Efeito do dispositivo de progesterona adicional durante protocolo de IATF e TETF à base de E2/P4 na fertilidade de vacas em lactação com baixa P4

Pós-graduação em Zootecnia - FMVZ