Electrochemistry and electrogenerated chemiluminescence of SiO2 nanoparticles/tris(2,2 '-bipyridyl)ruthenium(II) multilayer films on indium tin oxide electrodes

In this paper, a simple method of preparing {SiO2/Ru-(bPY)(3)(2+)}(n) multilayer films was described. Positively charged tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) and negatively charged SiO2 nanoparticles were assembled on ITO electrodes by a layer-by-layer method. Electrochemical and electrogenerated chemiluminescence (ECL) behaviors of the {SiO2/Ru(bpy)(3)(2+)}(n) multilayer film-modified electrodes were studied. Cyclic voltammetry, UV-visible spectroscopy, quartz crystal microbalance, and ECL were adopted to monitor the regular growth of the multilayer films. The multilayer films containing Ru(bpy)(3)(2+) was used for ECL determination of TPA, and the sensitivity was more than 1 order of magnitude higher than that observed for previous reported immobilization methods for the determination of TPA. The multilayer films also showed better stability for one month at least. The high sensitivity and stability mainly resulted from the high surface area and special structure of the silica nanoparticles.

Microstructures and tensile properties of Mg-8Gd-0.6Zr-xNd-yY (x+y=3, mass%) alloys

Mg-8Gd-0.6Zr-xNd-yY (mass%) alloys which containing different Nd:Y mass ratio of 3:0, 2:1, 1:2 and 0:3 with a constant x + y = 3 were prepared by metal mould casting method, and the microstructure, aging behaviour and tensile properties have been investigated. The fibrous eutectic areas along the boundaries enlarge clearly in the as-cast alloys containing Y element, and the fine grain boundaries and dispersed precipitation are observed in the aged alloys. The Mg-8Gd-0.6Zr-2Nd-Y alloy exhibits notably age-hardening behaviour and the highest mechanical property. The ultimate tensile strength and yield strength of Mg-8Gd-0.6Zr-2Nd-Y alloy in the peak aged hardness are 293 and 221 MPa at room temperature, 248 and 191 MPa at 230 degrees C. The improvement of age-hardening response and tensile properties is mainly attributed to the quadrate-like stable Mg5RE precipitate, which forms readily and orderly in aged Mg-8Gd-0.6Zr-2Nd-Y alloy.

硫堇与寡核苷酸结合序列选择性的光谱研究

用UV-Vis吸收光谱、荧光光谱、圆二色谱以及核磁共振光谱等手段研究了硫堇(TH)与两个不同序列寡核苷酸的作用。TH与寡核苷酸作用后的吸收光谱和荧光光谱产生了明显的减色红移和荧光猝灭效应。分别计算了TH与[oligo d(GC)]2和[oligo d(AT)]2作用的荧光猝灭常数和结合常数,结果表明TH与GC序列的结合能力比与AT序列更强。通过TH与[oligo d(GC)]2作用后双螺旋链构象变化以及TH质子的1HNMR谱峰明显变宽,进一步说明TH与寡核苷酸结合的序列选择性。

New neutral nickel(II) complexes bearing pyrrole-imine chelate ligands: synthesis, structure and norbornene polymerization behavior

New neutral nickel(II) complexes bearing nonsymmetric bidentate pyrrole-imine chelate ligands (4a-d), [2-(ArNCH)C4H3N]Ni(PPh3)Ph [Ar=2,6-diisopropylphenyl (a), 2-methyl-6-isopropylphenyl (b), 2,6-diethylphenyl (c), 2-tert-butylphenyl (d)], have been prepared in good yields from the sodium salts of the corresponding ligands and trans-Ni(PPh3)(2)(Ph)Cl, and the structure of complex 4a has been confirmed by X-ray crystallographic analysis. These neutral Ni(II) complexes were investigated as catalysts for the vinylic polymerization of norbornene. Using modified methylaluminoxane (MMAO) as a cocatalyst, these complexes display very high activities and produce great mass polymers. Catalyst activity of up to 4.2 x 10(7) g (mol Ni h)(-1) and the viscosity-average molecular weight of polymer of up to 9.2 x 10(5) g mol(-1) were observed. Catalyst activity, polymer yield, and polymer molecular weight can be controlled over a wide range by the variation of reaction parameters such as Al-Ni ratio, norbornene-catalyst ratio, monomer concentration, polymerization reaction temperature and time.

The synthesis and crystal structure of vanadium complexes: [(VO2)-O-IV(phen)(2)]center dot 6H(2)O and [2,2 '-(bipy)(2)(VO2)-O-V](H2BO3)center dot 3H(2)O

The organic-inorganic hybrid materials vanadium oxide [(VO2)-O-IV(phen)(2)](.)6H(2)O (1) and [(2,2'-bipy)(2)(VO2)-O-V](H2BO3)(.)3H(2)O (2) have been conventional and hydrothermal synthesized and characterized by single crystal X-ray diffraction, elemental analyses, respectively. Although the method and the ligand had been used in the syntheses of the compounds (1) and (2) are different, they almost possess similar structure. They all exhibit the distorted octahedral [VO2N4] unit with organonitrogen donors of the phen and 2,2'-bipy ligands, respectively, which coordinated directly to the vanadium oxide framework. And they are both non-mixed-valence complexes. But the compound (1) is isolated, and the compound (2) consists of a cation of [(2,2'-bipy)(2)(VO2)-O-V](+) and an anion of (H2BO3)(-). So the valence of vanadium of (1) and (2) are tetravalence and pentavalence, respectively. Meanwhile it is noteworthy that pi-pi stacking interaction between adjacent phen and 2,2'-bipy groups in compounds I and 2 also play a significant role in stabilization of the structure. Thus, the structure Of [(VO2)-O-IV(phen)(2)](.)6H(2)O and [(2,2'-bipy)(2)(VO2)-O-V](H2BO3)(.)3H(2)O are both further extended into interesting three-dimensional supramolecular.

Electrochemical study of ion channel behavior in incorporated poly L-glutamate bilayer lipid membranes

The lipid layer membranes were fabricated on the glassy carbon electrode (GC) and demonstrated to be bilayer lipid membranes by impedance spectroscopy. The formation of incorporated poly L-glutamate bilayer lipid membrane was achieved. The ion channel behavior of the incorporated poly L-glutamate membrane was determined. When the stimulus calcium cations were added into the electrolyte, the ion channel was opened immediately and exhibited distinct channel current. Otherwise, the ion channel was closed. The cyclic voltammogram at the GC electrode coated with incorporated poly L-glutamate DMPC film response to calcium ion is very fast compared with that at the GC electrode coated only with DMPC film. Ion channel current is not dependent on the time but on the concentration of calcium. The mechanism of the ion channel formation was investigated.

A highly reduced polyoxoanion with phosphorus-centered alternate layers of Mo/V oxides, [(PMo2Mo6V4O40)-Mo-V-V-VI-O-IV((VO)-O-IV)(2)](9-)

An unusual polyoxometalate [H2N(C2H4)(2)NH2](4)(H3O)[(PMO2Mo6V4O40)-Mo-V-V-VI-O-IV((VO)-O-IV)(2)].H2O is hydrothermally synthesized and characterized by IR, UV-VIS, elemental analyses, X-ray photoelectron spectrum, ESR, TG and Single crystal X-ray diffraction. The title compound crystallizes in the orthorhombic space group Pbca with a = 15-227(5), b = 19.491(4), c = 18.737(3) Angstrom, V = 5123(2) Angstrom(3), Z = 4, and R-1 (wR(2)) = 0.0726(0.1416). The compound contains an unusual highly reduced pseudo-Keggin type polyoxoanion and exhibits an interesting phosphorus-centered alternate arrangement of layers of molybdenum and vanadium oxides.

Electroluminescent properties of the Tris-(acetylsalicylate)-terbium (Tb(AS)(3))

The solubility of [Tris-(acetylsalicylate)-terbium] [Tb(AS)(3)] is improved to a greater extent than [Tris-(salicylate)-terbium] [Tb(Sal)(3)] following introduction of a flexible acetyl group. Th3+ binds with acetylsalicylate in solution at low pH value and the resultant Tb(AS)(3) has good solubility in chloroform. A Green EL device with the structure ITO/PVK/PVB:PBD: Tb(AS)(3)/ PBD/Al has been fabricated based on soluble Tb(AS)(3), in which Tb(AS)(3) was first used as an emissive center doped with PVK and PBD. The hole-transporting layer and the emissive layer were formed by spin coating. The device exhibited a highly pure characteristic green light of Tb3+. (C) 2001 Elsevier Science B.V. All rights reserved.

表面等离子体共振免疫传感的放大检测研究

表面等离子体共振免疫传感器是一类相对新型的免疫检测技术。将链霉亲和素 生物素系统用于表面等离子体共振免疫传感的信号放大 ,实时检测了人免疫球蛋白G(hIgG)的蛋白浓度。发生免疫反应的传感片和生物素化抗体反应后 ,传感片表面的一层生物素分子随后与链霉亲和素 生物素化抗体复合物中的链霉亲和素的活性位点发生亲和反应 ,从而使传感片表面特异健合的物质质量显著增加 ,大大提高了免疫检测的灵敏度和检测限。免疫反应经放大后 ,可检测 0 0 0 5～ 10 μg/mL浓度区间内的hIgG

定量结构-活性/性质相关性研究中变量选择方法的研究——遗传算法和几种传统算法的比较

鉴于变量选择在 QSAR/QSPR研究中的重要性 ,比较了遗传算法和几种传统的方法 ,如前进法、后退法及逐步回归法 .结果表明 ,对于研究中所用数据 ,遗传算法较几种传统的方法为好 ,其原因可能由于传统的方法陷入了局部最优 .遗传算法在变量较多的情况下方可显示出效率高和得到较好结果的优越性 .对于变量的选择 ,遗传算法是一值得推荐的有效的方法

SnO_2纳米粒子膜的性质和结构研究

用胶体化学法制得的SnO2水溶胶在其与空气的界面上能自发形成一层固态膜，将陈化不同时间的界面膜转移出来，采用紫外－可见光谱、X光电子能谱、椭圆偏振、TEM以及AFM等手段进行了表征。结果发现：界面膜有一个从无到有、达到稳定的过程，稳定时膜厚约为20nm；采取垂直方式转移出来的膜质量较好，致密、粒子分布均匀、团聚程度小；膜中SnO2纳米粒子是非化学计量比的，存在大量氧空位，随膜在空气中放置时间的增长，氧空位逐渐减少。

Pd/C催化剂在处理NO反应中的催化行为

研究了不同活性炭负载的Pd催化剂在NO＋CO反应中和单独处理NO时的催化行为．结果表明，Pd的引入可大大提高催化活性，且活性与Pd含量呈顺变关系．不同的载体对催化剂活性有很大影响．在NO＋CO反应中，由煤质炭为载体制得的催化剂活性很高，在低于550K时NO即可达到100%转化，而在单独NO时，由山桃核炭制得的催化剂有较高的活性，在低于650K时NO可达到100%转化．催化剂活性的差异与活性炭表面性质有关．当反应体系中有还原物质CO存在时，活性炭作为载体，Pd在其上的分散对活性有重要影响；当体系中没有还原物质时，活性炭作为还原剂参与反应，这时活性炭本身的性质变得十分重要.

石墨炉原子吸收法测定钢铁及合金中微量钒

探讨了石墨炉原子吸收法测定钢铁及合金中微量钒的各种实验条件及影响因素。 实验表明，采用热解涂层管与光控升温相结合并在温度稳定的情况下原子化，可改善信号峰 形，提高灵敏度，消除记忆效应。方法用于钢铁及合金中钒的分析，结果令人满意。

CaAl_3BO_7:RE(RE=Ce,Gd,Tb)中稀土离子的光谱特性

采用固相反应法合成了ＣａＡｌ３ＢＯ７ＲＥ（ＲＥ＝Ｃｅ，Ｇｄ，Ｔｂ），研究了Ｃｅ３＋，Ｇｄ３＋和Ｔｂ３＋的光谱特性．发现铈离子周围存在较强的晶场，使基态的４ｆ能级劈裂较大，从而导致铈离子的特征发射峰重叠较大；Ｃｅ３＋的５ｄ能级明显低于Ｇｄ３＋的６Ｉ、６Ｐ能级；Ｃｅ３＋和Ｔｂ３＋之间存在有效的能量传递