Influence of pH and precipitation temperature on the structural characteristics of aluminium hydroxides prepared form nitrate aqueous solutions

Aluminium Hydroxides were precipitated from Aluminium Nitrate and Ammonium Hydroxide, at the temperatures 64 degrees C (hot) and 25 degrees C (cold), under the pH conditions 5, 7 and 9. The samples were characterized by X-Ray Diffraction (XRD) and Differential Thermal Analysis (DTA). The hydroxide precipitated at pH 9 and 64 degrees C is built up by pseudoboehmite and a minor share of others apparently amorphous hydroxides. The crystallinity of the hot yielded pseudoboehmite diminishes with the pH. The crystallite size was evaluated as about 40 Angstrom for the best crystallized sample. The cold precipitated product is apparently composed by amorphous or very poorly crystallized hydroxides. Upon heating, the cold precipitated hydroxides, and the low pH and hot precipitated hydroxide, release their structural water before the occurrence, about 430 degrees C, of the transition of the pseudoboehmite to gamma-alumina, and exhibit a shifting (towards low temperature side) and a broadening in the peak of the transition to alpha-alumina, which occurs at 1200 degrees C in the pseudoboehmite pattern. The yielded pseudo-boehmite peptized by HNO3, addition and gelified by evaporation in a critical concentration approximately 0.17 gcm(-3).

Effects of processing on the structure of zein/oleic acid films investigated by X-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 angstrom, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5.angstrom d-spacing remained stable under processing while the 10 angstrom d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 angstrom) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods.

Hot-pressed 9.5/65/35 PLZT prepared by the polymeric precursor method

A 9.5/65/35 PLZT ceramic with a Pb-0.905 La-0.095 (Zr-0.65 Ti-0.35)(0.976) O-3 + 35 w% PbO formula was prepared using the Pechini method for powder preparation and two-step sintering in an oxygen atmosphere. Thr first step consisted of sintering at 1200 degrees C for 4 h with slow heating and cooling rates. The second step consisted of hot pressing at 1200 degrees C for 3 h, with slow heating and cooling rates and pressing pressures of 20 MPa (initial pressure) and 40 MPa (at sintering temperature). Investigations were made of the powder phase formation and powder morphology, i.e. The structure of sintered and hot-pressed PLZT ceramics. SEM microstructural analyses were carried out on the sintering and hot-pressing processes. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Preparation and characterizations of Ba0.8Ca0.2TiO3 by complex polymerization method (CPM)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development of metal oxide nanoparticles by soft chemical method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of milling condition on the surface integrity of hot forged steel

This paper presents a study on the influence of milling condition on workpiece surface integrity focusing on hardness and roughness. The experimental work was carried out on a CNC machining center considering roughing and finishing operations. A 25 mm diameter endmill with two cemented carbide inserts coated with TiN layer were used for end milling operation. Low carbon alloyed steel Cr-Mo forged at 1200 degrees C was used as workpiece on the tests. Two kinds of workpiece conditions were considered, i.e. cur cooled after hot forging and normalized at 950 degrees C for 2 h. The results showed that finishing operation was able to significantly decrease the roughness by at least 46% without changing the hardness. on the other hand, roughing operation caused an increase in hardness statistically significant by about 6%. The machined surface presented deformed regions within feed marks, which directly affected the roughness. Surface finish behavior seems to correlate to the chip ratio given the decrease of 25% for roughing condition, which damaged the chip formation. The material removal rate for finishing operation 41% greater than roughing condition demonstrated to be favorable to the heat dissipation and minimized the effect on material hardness.

Carcass and meat quality traits of wild boar (Sus scrofa s. L.) with 2n=36 karyotype compared to those of phenotypically similar crossbreeds (2n=37 and 2n=38) raised under same farming conditions. 1. Carcass quantity and meat dressing

The aim of this study was to compare wild boar (chromosomal number 2n = 36) to phenotypically similar animals of 2n = 37 and 2n = 38 chromosomes (crossbreeds) with respect to live weight, carcass yield, meat yield, fat and weight of inner organs. All animals were born and raised on the same farm and slaughtered at 39 weeks. The final live weight of wild boar 2n = 36 was significantly lower (47.2 kg) as compared to crossbreeds (80.0 kg). Animals 2n = 36 had more carcass yields (65.5%) than 2n = 37 karyotype (64.9%) and 2n = 38 (64.4%). Wild boar had the highest yields for the cuts with bones and boneless cuts compared to crossbreeds. Therefore, variations in karyotype are accompanied by differences in some carcass quantitative traits, i.e., 2n = 36 grow and fatten slower than crossbreeds 2n = 37 and 2n = 38. (c) 2008 Elsevier Ltd. All rights reserved.

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.

Desempenho produtivo de tilápia do Nilo alimentada com níveis de colina na dieta

Growth performance of Nile tilapia fed graded choline levels in the diet. A 109-day feeding trial was undertaken aiming to evaluate the growth performance of Nile tilapia fed graded choline levels One hundred and ninety-two (initial-weight 4 0 [plus or minus] 0 15 g) fingerlings were distributed into 32 net cages (200 L each), four cages per treatment and six fish per cage, placed in eight 10001, aquaria in a closed recirculation system The treatments were assigned to the tanks comprising eight treatments and loin replications arranged in a completely randomized experimental design Diets were supplemented with choline chloride to provide 100, 200, 400, 600, 800, 1000, 1200 mg of choline per kg of feed and an unsupplemented diet No significant differences were observed in growth performance, survival, apparent feed conversion, liver and fillet ether extract, hepatosomatic index and plasma lipid concentration, among treatments Choline levels did not improve growth performance, possibly because the amount of choline in the diet had already met fish requirement

Efeito dos reguladores de crescimento vegetal nas características agronômicas do algodoeiro e no controle de insetos

The experiment was carried out in 1993/94, in Jaboticabal, São Paulo State, Brazil, to verify the efficiency of plant growth regulators on agronomic characteristics of cotton and as pest control technique. The experimental design was a complete randomized block with four replications and seven treatments: 1) control; 2) ethephon + cyclanilide (720 + 90 g/ha a.i.); 3) ethephon + cyclanilide (960 + 120 g/ha a.i.); 4) ethephon + cyclanilide (1200 + 150 g/ha a.i.); 5) ethephon (960 g/ha a.i.); 6) ethephon (1200 g/ha a.i.) and 7) cyclanilide 150 g/ha a.i.). Results suggest that plant growth regulators can reduce harvest time in 15 days, contributing significantly to decreased late-season squares and immature bolls that serve as feeding and oviposition sites to boll weevils and pink bollworm.

Estudo sobre a resistencia aos antimicrobianos em bacterias isoladas de pacientes hospitalizados (Botucatu, 1988-1992)

Since 1988 to 1992, a study about susceptibility to antimicrobial drugs of bacterias isolated from hospitalized patients was performed. The compared susceptibility to important drugs (ampicillin, cephalotin, cefoxitin, ceftaxizime, ceftriaxone, aztreonam, gentamicin, amikacin, pefloxacin, ciprofloxacin, imipenem, oxacillin and vancomycin) was investigated in 1200 strains (300 of each specie) of the prevalent bacterias: E. coli, Klebsiella pneumoniae, Pseudomonas aeruginosa and S. aureus. Minimal inhibitory concentration (MIC) was determined by agar dilution method, using from 0.05 to 256 mcg of each drug per ml of culture medium (Mueller-Hinton). Ranges of MIC, MIC(50%), MIC(90%) and the proportion of resistant strains were determined and permitted to know the 4 drugs that were found to be more active against bacterias; the CIM(90%) values are: E. coli - aztreonam (0.1 mcg/ml), pefloxacin (0.1), ceftazidime (0.25) and ceftriaxone (0.05); K. pneumoniae-aztreonam (0.25) ceftriaxone (0.25), ceftazidime (0.5) and pefloxacin (2.0); P. aeruginosa-imipenem (4.0), aztreonam (16), ceftazidime (16) and ciprofloxacin (16); S. aureus-vancomycin (1.01, ciprofloxacin (8, 0), amikacin (128) and cephalothin (128 mg/ml). The better 'in vitro' antibacterial activity observed was related to: aztreonam (77-100% of the sensitive strains), ceftazidime (50-99,7%), pefloxacin (73-99,7%), ciprofloxacin (80%), imipenem (93%) and vancomycin (100%).

Estudo sobre a resistência aos antimicrobianos em bactérias isoladas de pacientes hospitalizados (Botucatu, 1988-1992)

Since 1988 to 1992, a study about susceptibility to antimicrobial drugs of bacterias isolated from hospitalized patients was performed. The compared susceptibility to important drugs (ampicilin, cephalothin, cefoxitin, ceftazidime, ceftriaxone, aztreonam, gentamicin, amikacin, peftoxacin, ciprofloxacin, imipenem, oxacillin and vancomicin) was investigated in 1200 strains (300 of each specie) of the prevalent bacterias: E. coli, Klebsiella pneumoniae, Pseudomonas aeruginosa and S. aureus. Minimal inhibitory concentration (MIC) was determined by agar dilution method, using from 0,05 to 256 mcg of each drug per ml of culture medium (Mueller-Hinton). Ranges of MIC, MIC 50%, MIC 90% and the proportion of resistant strains were determined and permited to know the 4 drugs that were found to be more active against bacterias; the CIM 90% values are: E. coli - aztreonam (0,1 mcg/ml), pefloxacin (0,1), ceftazidime (0,25) and ceftriaxone (0,05); K. pneumoniae - aztreonam (0,25), ceftriaxone (0,25), ceftazidime (0,5) and pefloxacin (2,0); P. aeruginosa - imipenem (4,0), aztreonam (16), ceftazidime (16) and ciprofloxacin (16); S. aureus - vancomicina (1,0), ciprofloxacin (8,0), arnicacina (128) and cephalothin (128 mg/ml). The better in vitro antibacterial activity observed was related to: aztreonam (77-100% of the sensitive strains), ceftazidime (50-99,7%), pefloxacin (73-99,7%), ciprofloxacin(80%), imipenem (93%) and vancomicin (100%).

Effect of atmosphere on the sintering and grain growth of tin oxide

High purity SnO 2 powder (>99.9%) was compacted in cylindrical pellets and sintered in atmospheres of dry argon, argon with water vapor, oxygen and CO 2 using 10 °C/min up to 1200 °C or isotherms in the range of 1000 to 1200 °C. Time, temperature and sintering atmosphere have large influence on grain growth and low influence on densification of this oxide. Surface diffusion is the dominant mechanism up to 1200 °C and evaporation-condensation is dominant above 1200 °C. The maximum linear shrinkage observed was about 2.0% and attributed to structural rearrangement of particles due to high capillary stresses developed with neighboring particles. © 1999 Trans Tech Publications.

RAPD analysis in the Neotropical fish Brycon lundii: Genetic diversity and its implications for the conservation of the species

Random amplified polymorphic DNA (RAPD) technique was used to examine the genetic variability on an endangered Neotropical fish species, Brycon lundii, collected on two regions with distinct environmental conditions in the São Francisco River (Brazil), downstream from a hydroelectric station. Using decamer oligonucleotides as single primers in Polymerase Chain Reaction (PCR), genetic similarity index, mean allele frequency and mean heterozigosity were estimated, revealing variations between samples from the two regions. Moreover, a fragment of about 1200 base pairs was found in 100% of the examined animals collected at the region closer to the hydroelectric dam, while its frequency was much lower (27.3%) within the sample from the second collecting site, 30 km downstream from the dam, indicating a possible correlation between genetic variation and geographical area. A dendogram representing the relationships among genotypes was obtained, demonstrating at least two major clusters of animals. Based on the data, a model of population structuring in Brycon lundii is suggested. The described approach holds great promise for further analyses and gives support to biodiversity maintenance and recovery efforts of B. lundii.

Glucose homeostasis in pregnant rats submitted to dietary protein restriction

In the present work, we examined the effects of feeding a low protein diet during pregnancy on glucose-induced insulin secretion and glucose homeostasis in rats. Young (60 days), pregnant (P) or non-pregnant (NP) rats were fed during pregnancy or for 21 days (the NP) a normal (17%) or a low (6%) protein diet. Serum glucose and insulin levels and pancreas insulin content in the fed state; total area under serum glucose curve (AG) after a glucose load and serum glucose disappearance rate (Kitt) after insulin administration; as well as 86Rb outflow, 45Ca uptake and insulin secretion by isolated pancreatic islets in response to glucose were evaluated. Serum glucose was lower in 17%-P (12%) and 6%-P (27%) than in corresponding NP-rats. Serum insulin was higher in 17%- P (153%) and 6%-P (77%) compared to the corresponding NP-rats. Pancreatic insulin was higher in 6%-rats (55%) than in 17%-rats. No differences were found in AG among the groups whereas Kitt was lower in 6%-NP and higher in 6%-P than in the equivalent 17% rats. Increasing glucose concentration from 2.8 to 16.7 mmol/l, reduced 86Rb outflow from isolated islets from all groups. Increasing glucose concentration from 2.8 to 16.7 mmol/l elevated 45Ca uptake by 17%-NP (47%), 17%-P (40%) and 6%-P (214%) islets but not by 6%-NP ones. The increase in 45Ca uptake was followed by an increase in insulin release by the 17%-NP (2767%), 17%-P (2850%) and 6%-P (1200%) islets. In conclusion, 6%-P rats show impaired glucose induced insulin secretion related to reduced calcium uptake by pancreatic islets. However, the poor insulin secretion did not fully compensate the high peripheral sensitivity to the hormone, resulting in hypoglycemia.