955 resultados para 100706 Nanofabrication Growth and Self Assembly
Resumo:
This project was on “Study of Slurry, as an enrichment compound, on growth and survival parameters of Rutilus firisii kutum Kamensky 1901 larva and compare with routine condition according to hypothesis that use of Slurry, fertile organic compound, to increase the efficiency of survivorship and growth of Rutilus firisii and in other hand adaptation of natural food was performance.” The object of this project is to compare growth of Rutilus firisii and in usual condition and the condition of use Slurry The experiences performed in culture and propagation center Dr. Yousefpour decent (Associan of Dr. Beheshti culture and propagation) in Siahkal village, 32 Km far from southeast, in North of Iran. In this plan, three different treatments and related these nine pools , in 1.7 hec area (in same condition) were determined so that the density of storage was 1.7 million/hec larva. In this research at first treatment m we use slurry as enrichment compound during larval within a period of 13 days, and it used all the days of during larval in second treatment. Then the result of this study compared to control treatment. The results have shown the level of this study compared to control treatment. The results have shown the level of survivorship in pools were nutrition by slurry was 1.7 million times or twice than pools were nutrition with usual concentrate. In addition, growth coefficient such as daily weight growing (DWG) index, daily length growth (DLG), specific growth ratio (SGR) were measured in this case. All of these parameters in slurry treatment were shown noticeable enhancement in first treatment Thereof in the first week there was significant difference (P<0.001) between the average of length and weight in first week , and in the second week there was a significant difference (P<0.05) between them.
Resumo:
Distribution of polychaetes worms Nereidae in intertidal zone of Bandar Abbass indicated that distribution rate of worms from the west to east for the reason status of seabed type, habitat and feeding substrate used to worms increased. Also investigation description that last-mentioned worms are belong to Nereididae family, Perinereis genus and species of Perinereis nuntia. By viewpoint seabed soil types experiments implement indicated Nereididae worms have higher survival with sandy clay loam soil texture. Statistical analysis showed positive relation coefficient correlation of Pearson between substrate type to frequency of worms and too substrate type with soil organic matter value (P<0.05). By viewpoint feeding also experiments with different feed treatment indicated that Nereid worms is Omnivore but in natural condition more utilized algae substrate special Entermorpha and survival rate had the worms last-mentioned in dietary treatments on this algae 93/3% different significant with other treatments (P<0.05). In this project pond-reared white Indian shrimp (Fenneropenaeus indicus) were used in four maturation and spawning trials lasting 60 days. one group of shrimps was fed a formulated pelleted special of broodstock diet only, a second group was fed squid meat diet; a third group of shrimps with mollusca (Solen vagina) meat diet and fourth group was fed polychaete worms Nereidae family, collected in intertidal zone of Bandar Abbass. Four types of dietary treatments (M1, M4) were given to separate batches that were run in three duplicate. Results of experiments demonstrate that more grew rate and maturation and spawning rate and we found that shrimps fed with polychaete worms have the best condition and then shrimps fed with solen. This is demonstrate furthermore environmental circumstance, endocrine hormone, types of feed important of maturation and spawning of shrimps and in polychaete worms used HUFA help to maturation ovarian in shrimp.
Resumo:
In this research reared white western shrimp (Litopenaeus vannamei ,Boone, 1931) with five diet with five different protein level contain 20%, 25%, 30%, 35% and 40% and three salinity level contain 15-17 ppt, 27-30 ppt,and 40-45 ppt researched protein percent effect and water salinity on growth, survival, feed conversion ratio, hemolymph osmolatity, hemolymph protein and corpse protein contain. In this research was 15 sorrow with 3 repeat and used from 45 tanks with 300 liters capacity. Shrimps first weight average was about 2 grams and after 60 days culture cropped down results: Shrimps biomass growth in 15-17 ppt salinity was higher than anther salinities who had meaning different with growth in 40-45 ppt salinity ( p< 0.05). But hadn’t meaning different with growth 27-30 ppt salinity. survival rate in 15-17 ppt salinity was 97.03 who was lower than another salinities. survival percent in 24-30 ppt salinity and 40-45 ppt salinity was 99.33% Highest biomass growth in different diets was in diet number 5 with 40 percent protein that it had meaning different with another diets (p<0.05) . although with informed to product expense in different diets. One kilogram shrimp product expense in different diets hadn’t meaning different (P<0.05) Survival rate in different diets hadn’t meaning different lowest feed conversion ratio was 1.67 in 15-14 salinity that hadn’t meaning different with another salinities also corpse protein quantity in different salinities and different diets hadn’t meaning different. Hemolymph Osmolality in 15-17 ppt salinity was 573.88 mOsm/kg had meaning different with hemolymph osmolality in 27-30 ppt salinity that was 650. 380 mOsm/kg and in 40-45 ppt salinity was 630.38 mOsm/kg. Hemolymph protein in 15-17 ppt salinity was 124.72 mg/ml had meaning different with hemlymph protein in 27-30 ppt salinity that was 136.52 mg/ml but hadn’t meaning different with hemolymph protein in 40-45 ppt salinity that was 128.84 mg/ml. Hemolymph protein in different diets hadn’t meaning different (p<0.05). Keywords: shrimp, Litopenaeus vannamei, protein , salinity, growth, survival rate, FCR, hemolymph osmolality, hemolymph protein.
Resumo:
The Uganda Fisheries Department had for some time, kept Nile crocodiles in captivity, and had thus collected a considerable amount of data on growth and feeding rates. It had also devised marking and handling techniques, and a system of pens and enclosures to deal with crocodiles up to 3 m. long. The following account describes these techniques and results, which followed a study of a proposed commercial crocodile farm.
Resumo:
The effects of tagging with Roy FD-68B T-bar anchor tags on estimates of growth in Tilapia (Oreochromis shiranus chilwae) were investigated in a pond and in a field experiment. In the pond experiment, mean length increments of tagged and marked fish were compared. In the field experiment growth of tagged and "untouched" individual wild fish were compared by measuring scale circuli spacing (Circ.), which is correlated to instantaneous growth rate. Length increments of tagged and untagged/marked fish were not significantly different in either experiment. In the pond experiment, the total mortality rate in the small tagged fish was significantly higher than in the marked fish. The recoveries of tagged fish in the pond experiment increased with fish size. Recoveries exceeded 80% at lengths over 13 cm TL. The ratios of tagged to marked recoveries were 1.02 and 0.74 for large and small fish respectively. The study shows that tagging of Tilapia with Roy anchor tags does not in general alter the growth rates of the fish.
Growth and characterisation of high-density mats of single-walled carbon nanotubes for interconnects
Resumo:
Super-Resolution imaging techniques such as Fluorescent Photo-Activation Localisation Microscopy (FPALM) have created a powerful new toolkit for investigating living cells, however a simple platform for growing, trapping, holding and controlling the cells is needed before the approach can become truly widespread. We present a microfluidic device formed in polydimethylsiloxane (PDMS) with a fluidic design which traps cells in a high-density array of wells and holds them very still throughout the life cycle, using hydrodynamic forces only. The device meets or exceeds all the necessary criteria for FPALM imaging of Schizosaccharomyces pombe and is designed to remain flexible, robust and easy to use. © 2011 IEEE.
Resumo:
Differential growth of thin elastic bodies furnishes a surprisingly simple explanation of the complex and intriguing shapes of many biological systems, such as plant leaves and organs. Similarly, inelastic strains induced by thermal effects or active materials in layered plates are extensively used to control the curvature of thin engineering structures. Such behaviour inspires us to distinguish and to compare two possible modes of differential growth not normally compared to each other, in order to reveal the full range of out-of-plane shapes of an initially flat disk. The first growth mode, frequently employed by engineers, is characterised by direct bending strains through the thickness, and the second mode, mainly apparent in biological systems, is driven by extensional strains of the middle surface. When each mode is considered separately, it is shown that buckling is common to both modes, leading to bistable shapes: growth from bending strains results in a double-curvature limit at buckling, followed by almost developable deformation in which the Gaussian curvature at buckling is conserved; during extensional growth, out-of-plane distortions occur only when the buckling condition is reached, and the Gaussian curvature continues to increase. When both growth modes are present, it is shown that, generally, larger displacements are obtained under in-plane growth when the disk is relatively thick and growth strains are small, and vice versa. It is also shown that shapes can be mono-, bi-, tri- or neutrally stable, depending on the growth strain levels and the material properties: furthermore, it is shown that certain combinations of growth modes result in a free, or natural, response in which the doubly curved shape of disk exactly matches the imposed strains. Such diverse behaviour, in general, may help to realise more effective actuation schemes for engineering structures. © 2012 Elsevier Ltd. All rights reserved.
Resumo:
The unique response of ferroic materials to external excitations facilitates them for diverse technologies, such as nonvolatile memory devices. The primary driving force behind this response is encoded in domain switching. In bulk ferroics, domains switch in a two-step process: nucleation and growth. For ferroelectrics, this can be explained by the Kolmogorov-Avrami-Ishibashi (KAI) model. Nevertheless, it is unclear whether domains remain correlated in finite geometries, as required by the KAI model. Moreover, although ferroelastic domains exist in many ferroelectrics, experimental limitations have hindered the study of their switching mechanisms. This uncertainty limits our understanding of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from reaching their full technological potential. Here we used piezoresponse force microscopy to study the switching mechanisms of ferroelectric-ferroelastic domains in thin polycrystalline Pb 0.7Zr0.3TiO3 films at the nanometer scale. We have found that switched biferroic domains can nucleate at multiple sites with a coherence length that may span several grains, and that nucleators merge to form mesoscale domains, in a manner consistent with that expected from the KAI model. © 2012 American Physical Society.