The impacts of policy change on collaborative governance networks

For many complex natural resources problems, planning and management efforts involve groups of organizations working collaboratively through networks (Agranoff, 2007; Booher & Innes, 2010). These networks sometimes involve formal roles and relationships, but often include informal elements (Edelenbos & Klijn, 2007). All of these roles and relationships undergo change in response to changes in personnel, priorities and policy. There has been considerable focus in the planning and public policy literature on describing and characterizing these networks (Mandell & Keast, 2008; Provan & Kenis, 2007). However, there has been far less research assessing how networks change and adjust in response to policy and political change. In the Australian state of Queensland, Natural Resource Management (NRM) organizations were created as lead organizations to address land and water management issues on a regional basis with Commonwealth funding and state support. In 2012, a change in state government signaled a dramatic change in policy that resulted in a significant reduction of state support and commitment. In response to this change, NRM organizations have had to adapt their networks and relationships. In this study, we examine the issues of network relationships, capacity and changing relationships over time using written surveys and focus groups with NRM CEOs, managers and planners (note: data collection events scheduled for March and April 2015). The research team will meet with each of these three groups separately, conduct an in-person survey followed by a facilitated focus group discussion. The NRM participant focus groups will also be subdivided by region, which correlates with capacity (inland/low capacity; coastal/high capacity). The findings focus on how changes in state government commitment have affected NRM networks and their relationships with state agencies. We also examine how these changes vary according to the level within the organization and the capacity of the organization. We hypothesize that: (1) NRM organizations have struggled to maintain capacity in the wake of state agency withdrawal of support; (2) NRM organizations with the lowest capacity have been most adversely affected, while some high capacity NRM organizations may have become more resilient as they have sought out other partners; (3) Network relationships at the highest levels of the organization have been affected the most by state policy change; (4) NRM relationships at the lowest levels of the organizations have changed the least, as formal relationships are replaced by informal networks and relationships.

Flux balance analysis of biological systems: applications and challenges

Systems level modelling and simulations of biological processes are proving to be invaluable in obtaining a quantitative and dynamic perspective of various aspects of cellular function. In particular, constraint-based analyses of metabolic networks have gained considerable popularity for simulating cellular metabolism, of which flux balance analysis (FBA), is most widely used. Unlike mechanistic simulations that depend on accurate kinetic data, which are scarcely available, FBA is based on the principle of conservation of mass in a network, which utilizes the stoichiometric matrix and a biologically relevant objective function to identify optimal reaction flux distributions. FBA has been used to analyse genome-scale reconstructions of several organisms; it has also been used to analyse the effect of perturbations, such as gene deletions or drug inhibitions in silico. This article reviews the usefulness of FBA as a tool for gaining biological insights, advances in methodology enabling integration of regulatory information and thermodynamic constraints, and finally addresses the challenges that lie ahead. Various use scenarios and biological insights obtained from FBA, and applications in fields such metabolic engineering and drug target identification, are also discussed. Genome-scale constraint-based models have an immense potential for building and testing hypotheses, as well as to guide experimentation.

Optimized group replacement scheduling for water pipeline network

Replacement of deteriorated water pipes is a capital-intensive activity for utility companies. Replacement planning aims to minimize total costs while maintaining a satisfactory level of service and is usually conducted for individual pipes. Scheduling replacement in groups is seen to be a better method and has the potential to provide benefits such as the reduction of maintenance costs and service interruptions. However, developing group replacement schedules is a complex task and often beyond the ability of a human expert, especially when multiple or conflicting objectives need to be catered for, such as minimization of total costs and service interruptions. This paper describes the development of a novel replacement decision optimization model for group scheduling (RDOM-GS), which enables multiple group-scheduling criteria by integrating new cost functions, a service interruption model, and optimization algorithms into a unified procedure. An industry case study demonstrates that RDOM-GS can improve replacement planning significantly and reduce costs and service interruptions.

Mathematics, programming, and STEM

Learning mathematics is a complex and dynamic process. In this paper, the authors adopt a semiotic framework (Yeh & Nason, 2004) and highlight programming as one of the main aspects of the semiosis or meaning-making for the learning of mathematics. During a 10-week teaching experiment, mathematical meaning-making was enriched when primary students wrote Logo programs to create 3D virtual worlds. The analysis of results found deep learning in mathematics, as well as in technology and engineering areas. This prompted a rethinking about the nature of learning mathematics and a need to employ and examine a more holistic learning approach for the learning in science, technology, engineering, and mathematics (STEM) areas.

Genetic erosion and changes in distribution of sorghum (Sorghum bicolor L. (Moench)) landraces in north-eastern Ethiopia

Ethiopia is believed to be the centre of origin and domestication for sorghum, where sorghum remains one of the main staple crops. Loss of biodiversity is occurring at an alarming rate in Ethiopia and crops, including sorghum, have long been recognized as vulnerable to genetic erosion. A major collection of sorghum germplasm was made in 1973 by Gebrekidan and Ejeta from north-eastern Ethiopia. A new collection of landraces was made in 2003, and these were field evaluated at Sirinka in 2004 along with representative samples from the 1973 collection. Farmer surveys and soil and climate surveys were also performed. Preliminary analysis demonstrated that some important landraces have disappeared either locally or regionally in the past 30 years and many other landraces have become marginalized. Landraces which are less preferred in terms of agronomic value and end use, and introductions, have become increasingly important. Late maturing landraces were found to be particularly vulnerable, with a number disappearing altogether. Farmers have become more risk averse, and factors such as declining soil fertility, more frequent drought and unreliable rainfall, and increased pest infestation have contributed to a change in farmer landrace selection. Data are presented on the variability and unique characters of some of the Ethiopian landraces, and implications for conservation are discussed.

Boundaries in Action : An Activity-theoretical Study of Development, Learning, and Change in Health Care Organization for Patients with Multiple and Chronic Illnesses

This study examines boundaries in health care organizations. Boundaries are sometimes considered things to be avoided in everyday living. This study suggests that boundaries can be important temporally and spatially emerging locations of development, learning, and change in inter-organizational activity. Boundaries can act as mediators of cultural and social formations and practices. The data of the study was gathered in an intervention project during the years 2000-2002 in Helsinki in which the care of 26 patients with multiple and chronic illnesses was improved. The project used the Change Laboratory method that represents a research assisted method for developing work. The research questions of the study are: (1) What are the boundary dynamics of development, learning, and change in health care for patients with multiple and chronic illnesses? (2) How do individual patients experience boundaries in their health care? (3) How are the boundaries of health care constructed and reconstructed in social interaction? (4) What are the dynamics of boundary crossing in the experimentation with the new tools and new practice? The methodology of the study, the ethnography of the multi-organizational field of activity, draws on cultural-historical activity theory and anthropological methods. The ethnographic fieldwork involves multiple research techniques and a collaborative strategy for raising research data. The data of this study consists of observations, interviews, transcribed intervention sessions, and patients' health documents. According to the findings, the care of patients with multiple and chronic illnesses emerges as fragmented by divisions of a patient and professionals, specialties of medicine and levels of health care organization. These boundaries have a historical origin in the Finnish health care system. As an implication of these boundaries, patients frequently experience uncertainty and neglect in their care. However, the boundaries of a single patient were transformed in the Change Laboratory discussions among patients, professionals and researchers. In these discussions, the questioning of the prevailing boundaries was triggered by the observation of gaps in inter-organizational care. Transformation of the prevailing boundaries was achieved in implementation of the collaborative care agreement tool and the practice of negotiated care. However, the new tool and practice did not expand into general use during the project. The study identifies two complementary models for the development of health care organization in Finland. The 'care package model', which is based on productivity and process models adopted from engineering and the 'model of negotiated care', which is based on co-configuration and the public good.

Economic analyses and policy implications for microalgae biofuels in Australia

The benefits of microalgae biofuels over first and second generation counterparts suggest it has potential as a major biofuel feedstock in Australia. However, the high costs of cultivation and processing has been a major drawback for investors and policymakers. This presentation outlines the economic potential for microalgae biofuels: firstly, through production of microalgae co-products (e.g feed and fertiliser); and secondly, deriving what consumers are willing to pay for microalgae biofuels based on external benefits. These findings will assist decision-makers in both private and public sectors and inform policy development with respect to microalgae as a feedstock for biofuels and other products. This study adds an economics perspective to the current technical literature which has been dominated by biochemical, engineering and financial valuation studies.

Stream power criterion and design of sand bed channels at incipient motion

The critical stream power criterion may be used to describe the incipient motion of cohesionless particles of plane sediment beds. The governing equation relating ``critical stream power'' to ``shear Reynolds number'' is developed by using the present experimental data as well as the data from several other sources. Simultaneously, a resistance equation, relating the ``particle Reynolds number'' to the``shear Reynolds number'' is developed for plane sediment beds in wide channels with little or no transport. By making use of these relations, a procedure is developed to design plane sediment beds such that any two of the four design variables, including particle size, energy/friction slope, flow depth, and discharge per unit width in the channel should be known to predict the remaining two variables. Finally, a straightforward design procedure using design tables/design curves and analytical methods is presented to solve six possible design problems.

Can we safely deform a plate to fit every bone? Population-based fit assessment and finite element deformation of a distal tibial plate

Anatomically precontoured plates are commonly used to treat periarticular fractures. A well-fitting plate can be used as a tool for anatomical reduction of the fractured bone. Recent studies highlighted that some plates fit poorly for many patients due to considerable shape variations between bones of the same anatomical site. While it is impossible to design one shape that fits all, it is also burdensome for the manufacturers and hospitals to produce, store and manage multiple plate shapes without the certainty of utilization by a patient population. In this study, we investigated the number of shapes required for maximum fit within a given dataset, and if they could be obtained by manually deforming the original plate. A distal medial tibial plate was automatically positioned on 45 individual tibiae, and the optimal deformation was determined iteratively using finite element analysis simulation. Within the studied dataset, we found that: (i) 89% fit could be achieved with four shapes, (ii) 100% fit was impossible through mechanical deformation, and (iii) the deformations required to obtain the four plate shapes were safe for the stainless steel plate for further clinical use. The proposed framework is easily transferable to other orthopaedic plates.

Non-linear and linear postulations of technology adoption determinants

Using polynomial regression and response surface analysis to examine the non-linearity between variables, this study demonstrates that better analytical nuances are required to investigate the relationships between constructs when the underlying theories suggest non-linearity. By utilising the Theory of Planned Behaviour (TPB), Ettlie’s adoption stages as well as employing data gathered from 162 owners of Small and Medium-sized Enterprises (SMEs), our findings reveal that subjective norms and attitude have differing influences upon behavioural intention in both the evaluation and trial stages of the adoption.

The truncated dielectric-coated conducting sphere-radiation and gain characteristic

An exhaustive study of the radiation and gain characteristics of a truncated dielectric-coated conducting spherical antenna excited in the symmetric TM mode has been reported. The effect of the various structure parameters on the radiation and the gain characteristics for a few even and odd order TM., modes for different structures is shown. The theorctical radiation patterns and gain have been compared with experiment. It is found that there is good agreement between theory and experiment in the case of TM es and TM os,modes. A theoretical and experimental study of the radiation and gain characcteristics in the frequency range 8.0 to 12.0 GHz has been reported.

Consumers' emotional judgement of materials durability and disposal

The literature demonstrates that understanding relating to the use of materials in product design has been investigated from both engineering and design perspectives. However, none of these studies have explored the consumers’ concepts of the materials; rather they have focused on participants’ discussions of material samples. Consumers’ emotional reactions to the materials themselves or the consumers’ reaction to the durability of the materials have not been previously explored in depth. This research has investigated these issues and has found that consumers have very specific concepts about materials. Furthermore, the combinations of consumer concepts that are likely to elicit an emotional judgement by the consumer have also been identified. It was found that consumers are conscious of the durability of their products and the materials that they are made from. This knowledge contributes to the support of environmentally conscious design, as well as user-centered design knowledge and practice. An understanding of the emotion consumers attribute to the effect wear and aging had on the materials’ physical appearance has been achieved. This understanding of consumers’ emotional reactions to materials can contribute not only to design considerations but to knowledge regarding the promotion of prolonged product-user relationships.

Evaluating and validating abundance monitoring methods in the absence of populations of known size: review and application to a passive tracking index

Rarely is it possible to obtain absolute numbers in free-ranging populations and although various direct and indirect methods are used to estimate abundance, few are validated against populations of known size. In this paper, we apply grounding, calibration and verification methods, used to validate mathematical models, to methods of estimating relative abundance. To illustrate how this might be done, we consider and evaluate the widely applied passive tracking index (PTI) methodology. Using published data, we examine the rationality of PTI methodology, how conceptually animal activity and abundance are related and how alternative methods are subject to similar biases or produce similar abundance estimates and trends. We then attune the method against populations representing a range of densities likely to be encountered in the field. Finally, we compare PTI trends against a prediction that adjacent populations of the same species will have similar abundance values and trends in activity. We show that while PTI abundance estimates are subject to environmental and behavioural stochasticity peculiar to each species, the PTI method and associated variance estimate showed high probability of detection, high precision of abundance values and, generally, low variability between surveys, and suggest that the PTI method applied using this procedure and for these species provides a sensitive and credible index of abundance. This same or similar validation approach can and should be applied to alternative relative abundance methods in order to demonstrate their credibility and justify their use.

Should I stay or should I go?: Rural and remote students in first year university stem courses

Research on the achievement of rural and remote students in science and mathematics is located within a context of falling levels of participation in physical science and mathematics courses in Australian schools, and underrepresentation of rural students in higher education. International studies such as the Programme of International Student Assessment (PISA), have reported lower levels of mathematical and scientific literacy in Australian students from rural and remote schools (Thomson et al, 2011). The SiMERR national survey of science, mathematics and ICT education in rural and regional Australia (Lyons et al, 2006) identified factors affecting student achievement in rural and remote schools. Many of the issues faced by rural and remote students in their schools are likely to have implications on their university enrolments in science, technology, engineering and mathematics (STEM) courses. For example, rural and remote students are less likely to attend university in general than their city counterparts and higher university attrition rates have been reported for remote students nationally. This paper examines the responses of a sample of rural/remote Australian first year STEM students at Australian universities to two questions. These related to their intentions to complete the course; and whether -and if so, why- they had ever considered withdrawing from their course. Results indicated that rural students who were still in their course by the end of first year were no more or less likely to consider withdrawing than were their peers from more populous centres. However, almost 20% of the rural cohort had considered withdrawing at some stage in their course, and their explanations provide insights into the reasoning of those who may not persist with their courses at university. These results, in the context of the greater attrition rate of remote students from university, point to the need to identify factors that positively impact on rural and remote students’ interest and achievement in science and mathematics. It also highlights a need for future research into the particular issues remote students may face in deciding whether or not to do science at the two key transition points of senior school and university/TAFE studies, and whether or not to persist in their tertiary studies. This paper is positioned at the intersection of two problems in Australian education. The first is a context of falling levels of participation in physical science and mathematics courses in Australian universities. The second is persistent inequitable access to, and retention in, tertiary education for students from rural and remote areas. Despite considerable research attention to both of these areas over recent years these problems have thus far proved to be intractable. This paper therefore aims to briefly review the relevant Australian literature pertaining to these issues; that is, declining STEM enrolments, and the underrepresentation and retention of rural/remote students in higher education. Given the related problems in these two overlapping domains, we then explore the views of first year rural students enrolled in courses, in relation to their intentions of withdrawing (or not) and the associated reasons for their views.