Effects of rumen-protected polyunsaturated fatty acid supplementation on reproductive performance of Bos indicus beef cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In situ and in vitro comparison of laser fluorescence with visual inspection in detecting occlusal caries lesions

The aim of this study was to compare the in situ and in vitro performances of a laser fluorescence (LF) device (DIAGNOdent 2095) with visual inspection for the detection of occlusal caries in permanent teeth. Sixty-four sites were selected, and visual inspection and LF assessments were carried out, in vitro, three times by two independent examiners, with a 1-week interval between evaluations. Afterwards, the occlusal surfaces were mounted on the palatal portion of removable acrylic orthodontic appliances and placed in six volunteers. Assessments were repeated and validated by histological analysis of the tooth sections under a stereomicroscope. For both examiners, the highest intra-examiner values were observed for the visual inspection when in vitro and in situ evaluations were compared. The inter-examiner reproducibility varied from 0.61 to 0.64, except for the in vitro assessment using LF, which presented a lower value (0.43). The methods showed high specificity at the D(1) threshold (considering enamel and dentin caries as disease). In vitro evaluations showed the highest values of sensitivity for both methods when compared to the in situ evaluations at D(1) and D(2) (considering only dentinal caries as the disease) thresholds. For both methods, the results of sensitivity (at D(1) and D(2)) and accuracy (at D(1)) showed significant differences between in vitro and in situ conditions. However, the sensitivity (at D(1) and D(2)), specificity and accuracy (both at D(1)) of the methods were not significantly different when the same condition was considered. It can be concluded that visual inspection and LF showed better performance in vitro than in situ.

Influence of examiner's clinical experience on the reproducibility and accuracy of radiographic examination in detecting occlusal caries

The aim of this in vitro study was to assess the influence of varying examiner's clinical experience on the reproducibility and accuracy of radiographic examination for occlusal caries detection. Standardized bitewing radiographs were obtained from 166 permanent molars. Radiographic examination was performed by final-year dental students from two universities (A, n=5; B, n=5) and by dentists with 5 to 7 years of experience who work in two different countries (C, n=5; D, n=5). All examinations were repeated after 1-week interval. The teeth were histologically prepared and assessed for caries extension. For intraexaminer reproducibility, the unweighted kappa values were: A (0.11-0.40), B (0.12-0.33), C (0.47-0.58), and D (0.42-0.71). Interexaminer reproducibility statistics were computed based on means +/- SD of unweighted kappa values: A (0.07 +/- 0.05), B (0.12 +/- 0.09), C (0.24 +/- 0.08), and D (0.33 +/- 0.10). Sensitivity, specificity, and accuracy were calculated at D(1) and D(3) thresholds and compared by performing McNemar test (p=0.05). D(1) sensitivity ranged between 0.29 and 0.75 and specificity between 0.24 and 0.85. D(3) specificity was moderate to high (between 0.62 and 0.95) for all groups, with statistically significant difference between the dentists groups (C and D). Sensitivity was low to moderate (between 0.21 and 0.57) with statistically significant difference for groups B and D. Accuracy was similar for all groups (0.55). Spearman's correlations were: A (0.12), B (0.24), C (0.30), and D (0.38). In conclusion, the reproducibility of radiographic examination was influenced by the examiner's clinical experience, training, and dental education as well as the accuracy in detecting occlusal caries.

Shear bond strength of metal-ceramic repair systems

Statement of problem. When clinical fractures of the ceramic veneer on metal-ceramic prostheses can be repaired, the need for remake may be eliminated or postponed. Many different ceramic repair materials are available, and bond strength data are necessary for predicting the success of a given repair system.Purpose. This study evaluated the shear bond strength of different repair systems for metal-ceramic restorations applied on metal and porcelain.Material and methods. Fifty cylindrical specimens (9 X 3 mm) were fabricated in a nickel-chromium alloy (Vera Bond 11) and 50 in feldspathic porcelain (Noritakc). Metal (M) and porcelain (P) specimens were embedded in a polyvinyl chloride (PVC) ring and received I of the following bonding and resin composite repair systems (n=10): Clearfil SE Bond/Clearfil AP-X (CL), Bistite II DC/Palfique (BT), Cojet Sand/Z100 (Q), Scotchbond Multipurpose Plus/Z100 (SB) (control group), or Cojet Sand plus Scotchbond Multipurpose Plus/Z100 (CJSB). The specimens were stored in distilled water for 24 hours at 37 degrees C, thermal cycled (1000 cycles at 5 degrees C to 55 degrees C), and stored at 37 degrees C for 8 days. Shear bond tests between the metal or ceramic specimens and repair systems were performed in a mechanical testing machine with a crosshead speed of 0.5 mm/min. Mean shear bond strength values (MPa) were submitted to 1-way ANOVA and Tukey honestly significant difference tests (alpha=.05). Each specimen was examined under a stereoscopic lens with X 30 magnification, and mode of failure was classified as adhesive, cohesive, or a combination.Results. on metal, the mean shear bond strength values for the groups were as follows: MCL, 18.40 +/- 2.88(b); MBT, 8.57 +/- 1.00(d); MCJ, 25.24 +/- 3.46(a); MSB, 16.26 +/- 3.09(bc); and MCJSB, 13.11 +/- 1.24(c). on porcelain, the mean shear bond strength values ofeach group were as follows: PCL, 16.91 +/- 2.22(b); PBT, 18.04 +/- 3.2(ab); PCJ, 19.54 +/- 3.77(ab); PSB, 21.05 +/- 3.22(a); and PCJSB, 16.18 +/- 1.71(b). Within each substrate, identical superscript letters denote no significant differences among groups.Conclusions. The bond strength for the metal substrate was significantly higher using the Q system. For porcelain, SB, Q, and BT systems showed the highest shear bond strength values, and only SB was significantly different compared to CL and CJSB (P <.05).

Correlations Between Pre- and Post-Fasting Growth in Nile Tilapia

We tested the correlation between growth rate before and after a food deprivation phase in twelve single held Nile tilapias, Oreochromis niloticus. The experiment was divided into three phases: before food deprivation (phase 1: 15 d), food deprivation (phase 2: 12 d) and refeeding (phase 3: 15 d). The specific growth rate - SGR, food conversion efficiency - FCE and feed ingestion increased significantly during phase 3. Positive and significant correlations were found either to SGR or to feed ingestion between Phase 1 and 3 but not for FCE. The SGR on phase 3, moreover, were positively correlated to FCE and feed ingestion, while on phase 1 SGR was positively correlated to FCE only. Thus, high pre-fasting SGR or feed ingestion reflects in likewise high post-fasting SGR or feed ingestion values. Moreover, since SGR and FCE are correlated to each other in both phase 1 and 3, but phase 3 SGR is also correlated to feed ingestion; we could suppose that hyperphagic behaviour could be the main compensatory mechanism. Accordingly, we suggest that a fish with an elevated growth performance shall display a proportionally raised post-fasting growth response in order to normalize its predetermined growth trajectory and resume its normal growth rate.

Reproductive behavior of the swimming crab Arenaeus cribrarius (Lamarck, 1818) (Crustacea, Brachyura, Portunidae) in captivity

In this study, the reproductive behavior exhibited by Arenaeus cribrarius in captivity was described, and the duration of each behavioral stage was measured. Swimming crabs were trawled in Ubatuba, northern littoral of São Paulo State, Brazil, and maintained in aquaria. Water conditions and food items were provided according to this species' natural requirements in the wild. In the presence of premolt females, intermolt males exhibited a courtship display that became intensified when the potential mate was visually perceived. After mate selection, the male carried the female under itself (precopulatory position) for 29.8 +/- 5.1 d until the female molted. Afterwards, the male manipulated the recently molted female, and inverted her position under itself as to penetrate her with his first pair of pleopods (copulation), a process that took 17.1 +/- 4.6 h. After copulation the male continued to carry his soft-shelled mate for 29.7 +/- 5.8 d (postcopulatory position). The time elapsed between copulation and spawning was 57.8 +/- 3.8 d and the time interval between successive spawns 33.8 +/- 7.1 d. Total embryonic development took 13.5 +/- 2.1 d in temperature conditions of 25.0 +/- 2.0 degrees C. During the last 4.7 +/- 1.4 d embryos' eyes were already visible. The reproductive behavior pattern in A. cribrarius is very similar to those previously described in other portunids.

Effect of Conditioning on the Production of Inulinase by Kluyveromyces marxianus var. bulgaricus through Fed-Batch Fermentation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Critical temperature for first-order phase transitions in confined systems

We consider the Euclidean D-dimensional -lambda vertical bar phi vertical bar(4)+eta vertical bar rho vertical bar(6) (lambda,eta > 0) model with d (d <= D) compactified dimensions. Introducing temperature by means of the Ginzburg-Landau prescription in the mass term of the Hamiltonian, this model can be interpreted as describing a first-order phase transition for a system in a region of the D-dimensional space, limited by d pairs of parallel planes, orthogonal to the coordinates axis x(1), x(2),..., x(d). The planes in each pair are separated by distances L-1, L-2, ... , L-d. We obtain an expression for the transition temperature as a function of the size of the system, T-c({L-i}), i = 1, 2, ..., d. For D = 3 we particularize this formula, taking L-1 = L-2 = ... = L-d = L for the physically interesting cases d = 1 (a film), d = 2 (an infinitely long wire having a square cross-section), and for d = 3 (a cube). For completeness, the corresponding formulas for second-order transitions are also presented. Comparison with experimental data for superconducting films and wires shows qualitative agreement with our theoretical expressions.

Dimensional Compactification and Two-Particle Binding

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Size distributions of fine silicate and other particles in Masaya's volcanic plume

Direct-sampling and remote-sensing measurements were made at the crater rim of Masaya volcano (Nicaragua) to sample the aerosol plume emanating from the active vent. We report the first measurements of the size distribution of fine silicate particles (d <10 mu m) in Masaya's plume, by automated scanning electron microscopy (QEMSCAN) analysis of a particle filter. The particle size distribution was approximately lognormal with modal d similar to 1.15 mu m. The majority of these particles were found to be spherical. These particles are interpreted to be droplets of quenched magma produced by a spattering process. Compositional analyses confirm earlier reports that the fine silicate particles show a range of compositions between that of the degassing magma and nearly pure silica and that the extent of compositional variability decreases with increasing particle size. These results indicate that fine silicate particles are altered owing to reactions with acidic droplets in the plume. The emission flux of fine silicate particles was estimated as similar to 10(11) s(-1), equivalent to similar to 55 kg d(-1). Sun photometry, aerosol spectrometry, and thermal precipitation were used to determine the overall particle size distribution of the plume (0.01 < d(mu m) < 10). Sun photometry and aerosol spectrometry measurements indicate the presence of a large number of particles (assumed to be aqueous) with d similar to 1 mu m. Aerosol spectrometry measurements further show an increase in particle size as the nighttime approached. The emission flux of particles from Masaya was estimated as similar to 10(17) s(-1), equivalent to similar to 5.5 Mg d(-1) where d < 4 mu m.

Substâncias antifúngicas de Xylaria sp., um fungo endofítico isolado de Palicourea marcgravii (Rubiaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de diferentes substratos na produção de mudas de mangabeira (Hancornia speciosa)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Acephate and methamidophos residues in greenhouse and in field grown tomatoes

O aumento da produção hortícola em cultivo protegido necessita de estudos mais detalhados acerca da ocorrência de resíduos de agrotóxicos, devido às condições ambientais peculiares nesse sistema, no qual pragas de pouca importância no campo assumem relevância. Avaliou-se os resíduos dos inseticidas acefato e de seu metabólito metamidofós em tomate sob cultivo protegido e em campo. Os tratamentos aplicados foram: (a) testemunha; (b) uma aplicação de 75 g i.a. acefato.100 L-1 de água; (c) uma aplicação com 150 g i.a.100 L-1 de água; (d) quatro aplicações na dosagem de 75 g i.a.100 L-1 de água. As amostras foram tomadas a (-1), zero, 1, 3, 7, 14 e 21 dias após a última ou única aplicação. A determinação quantitativa foi feita por técnica de cromatografia em fase gasosa, usando-se detector fotométrico de chama. Os resíduos de acefato e de metamidofós nos frutos de cultivo protegido e de campo, sempre estiveram abaixo dos respectivos limites máximos de resíduos (LMRs) em todo o período de colheita das amostras. Ainda, o metabolismo de acefato a metamidofós foi muito baixo nos frutos, particularmente importante nas folhas, mas não foi bem caracterizado no solo. Os resíduos de acefato foram maiores no cultivo protegido do que no campo, especialmente em folhas e no solo, sendo também estáveis e persistentes, em geral até a amostragem de 7 dias após a aplicação.

Classificação de tomate-cereja em função do tamanho e peso dos frutos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.