Liquid-phase microextraction for simultaneous chromatographic analysis of three antidepressant drugs in plasma

A method using Liquid Phase Microextraction for simultaneous detection of citalopram (CIT), paroxetine (PAR) and fluoxetine (FLU), using venlafaxine as internal standard, in plasma by high performance liquid chromatography with fluorescence detection was developed. The linearity was evaluated between 5.0 and 500 ng mL-1 (r > 0.99) and the limit of quantification was 2.0, 3.0 and 5.0 ng mL-1 for CIT, PAR and FLU, respectively. Therefore, it can be applied to therapeutic drug monitoring, pharmacokinetics or bioavailability studies and its advantages are that it necessary relatively inexpensive equipment and sample preparation techniques.

Modeling of electrolyte sorption – from phase equilibria to dynamic separation systems

In this thesis, general approach is devised to model electrolyte sorption from aqueous solutions on solid materials. Electrolyte sorption is often considered as unwanted phenomenon in ion exchange and its potential as an independent separation method has not been fully explored. The solid sorbents studied here are porous and non-porous organic or inorganic materials with or without specific functional groups attached on the solid matrix. Accordingly, the sorption mechanisms include physical adsorption, chemisorption on the functional groups and partition restricted by electrostatic or steric factors. The model is tested in four Cases Studies dealing with chelating adsorption of transition metal mixtures, physical adsorption of metal and metalloid complexes from chloride solutions, size exclusion of electrolytes in nano-porous materials and electrolyte exclusion of electrolyte/non-electrolyte mixtures. The model parameters are estimated using experimental data from equilibrium and batch kinetic measurements, and they are used to simulate actual single-column fixed-bed separations. Phase equilibrium between the solution and solid phases is described using thermodynamic Gibbs-Donnan model and various adsorption models depending on the properties of the sorbent. The 3-dimensional thermodynamic approach is used for volume sorption in gel-type ion exchangers and in nano-porous adsorbents, and satisfactory correlation is obtained provided that both mixing and exclusion effects are adequately taken into account. 2-Dimensional surface adsorption models are successfully applied to physical adsorption of complex species and to chelating adsorption of transition metal salts. In the latter case, comparison is also made with complex formation models. Results of the mass transport studies show that uptake rates even in a competitive high-affinity system can be described by constant diffusion coefficients, when the adsorbent structure and the phase equilibrium conditions are adequately included in the model. Furthermore, a simplified solution based on the linear driving force approximation and the shrinking-core model is developed for very non-linear adsorption systems. In each Case Study, the actual separation is carried out batch-wise in fixed-beds and the experimental data are simulated/correlated using the parameters derived from equilibrium and kinetic data. Good agreement between the calculated and experimental break-through curves is usually obtained indicating that the proposed approach is useful in systems, which at first sight are very different. For example, the important improvement in copper separation from concentrated zinc sulfate solution at elevated temperatures can be correctly predicted by the model. In some cases, however, re-adjustment of model parameters is needed due to e.g. high solution viscosity.

Energetic sustainability of three arabica coffee growing systems used by family farming units in Espírito Santo state

Three growing systems of Arabica coffee were evaluated under the energy perspective, in the state of Espírito Santo in Brazil. The systems are conventional cultivation (CC), cultivation with good agricultural practices (CGP) and organic farming (OF). It was made a comparison of the energy flows within these three systems to show sustainable levels of each one based on production average data of several family-farming units. Therefore, we analyzed crop yield, total energy efficiency reverse (TEER), energy efficiency of ripe coffee (EERC) and non-renewable energy efficiency (NREE). OF system had values for TEER, EERC and NREE of 3.3 4.7 and 7.9 respectively. Yet CC showed values of 1.8, 1.9 and 1.6 for TEER, EERC and NREE respectively. Furthermore, CGP presented values for TEER, EERC and NREE of 0.7, 1.3 and 1.4 respectively. The highest yield was observed in CGP, reaching an amount of 1794 kg ha-1(17,455 MJ); however, this system expends more energy than it converts. Thus, over those points, OF is the most sustainable system.

Maintaining supply performance during an ERP system implementation phase : case Cloetta Suomi Oy

Implementing an enterprise resource planning (ERP) system often means a major change to an organization and involves significant risks. It is typical that many of the ERP system implementations fail resulting in tremendous damage to the business. Moreover, running normal business operations during an ERP system implementation is far more complicated than normally. This thesis focuses on how an organization should manage the ERP system implementation process in order to maintain supply performance during the implementation phase. The theoretical framework in this thesis focuses on ERP system implementations with a critical success factor approach. Critical success factors can be divided into strategic and tactical level success factors. By considering these critical success factors, ERP system implementation project’s timeline and best practices of an ERP implementation, a critical success factor based ERP system implementation management framework is presented. The framework can be used as a theoretical framework when the goal is to avoid ERP system implementation phase issues that are driven by the ERP system implementation project and that may decrease organization’s supply performance. This thesis is a case study that was written on an assignment to a confectionary company Cloetta Suomi Oy. In order to collect data, interviews of the case company personnel were conducted. In addition, several other data collection methods were used throughout the research process. These data collection methods include examination of presentations and archival records as well as direct observations in case company meetings and in various work duties. The results of this thesis indicate that there are several factors that may decrease organization’s supply performance during the ERP system implementation. These issues are categorized under external and internal issues and further into six risk drivers that are suppliers, customers, products, staff, information systems and other projects. After the description and categorization of each issue, the thesis focuses on finding solutions on how to avoid or mitigate the impact of these issues on the organization’s supply performance. This examination leads to several operational activities that are also practical to business practitioners. It is also stated that a successful ERP system implementation that also causes minimal disturbance to organization’s supply performance during the ERP system implementation, is achieved by considering three levels of actions.

In search of information systems value : a case study of the EHR benefits realisation efforts of three Swedish hospitals.

The Swedish public health care organisation could very well be undergoing its most significant change since its specialisation during the late 19th and early 20th century. At the heart of this change is a move from using manual patient journals to electronic health records (EHR). EHR are complex integrated organisational wide information systems (IS) that promise great benefits and value as well as presenting great challenges to the organisation. The Swedish public health care is not the first organisation to implement integrated IS, and by no means alone in their quest for realising the potential benefits and value that it has to offer. As organisations invest in IS they embark on a journey of value-creation and capture. A journey where a costbased approach towards their IS-investments is replaced with a value-centric focus, and where the main challenges lie in the practical day-to-day task of finding ways to intertwine technology, people and business processes. This has however proven to be a problematic task. The problematic situation arises from a shift of perspective regarding how to manage IS in order to gain value. This is a shift from technology delivery to benefits delivery; from an ISimplementation plan to a change management plan. The shift gives rise to challenges related to the inability of IS and the elusiveness of value. As a response to these challenges the field of IS-benefits management has emerged offering a framework and a process in order to better understand and formalise benefits realisation activities. In this thesis the benefits realisation efforts of three Swedish hospitals within the same county council are studied. The thesis focuses on the participants of benefits analysis projects; their perceptions, judgments, negotiations and descriptions of potential benefits. The purpose is to address the process where organisations seek to identify which potential IS-benefits to pursue and realise, this in order to better understand what affects the process, so that realisation actions of potential IS-benefits could be supported. A qualitative case study research design is adopted and provides a framework for sample selection, data collection, and data analysis. It also provides a framework for discussions of validity, reliability and generalizability. Findings displayed a benefits fluctuation, which showed that participants’ perception of what constituted potential benefits and value changed throughout the formal benefits management process. Issues like structure, knowledge, expectation and experience affected perception differently, and this in the end changed the amount and composition of potential benefits and value. Five dimensions of benefits judgment were identified and used by participants when finding accommodations of potential benefits and value to pursue. Identified dimensions affected participants’ perceptions, which in turn affected the amount and composition of potential benefits. During the formal benefits management process participants shifted between judgment dimensions. These movements emerged through debates and interactions between participants. Judgments based on what was perceived as expected due to one’s role and perceived best for the organisation as a whole were the two dominant benefits judgment dimensions. A benefits negotiation was identified. Negotiations were divided into two main categories, rational and irrational, depending on participants’ drive when initiating and participating in negotiations. In each category three different types of negotiations were identified having different characteristics and generating different outcomes. There was also a benefits negotiation process identified that displayed management challenges corresponding to its five phases. A discrepancy was also found between how IS-benefits are spoken of and how actions of IS benefits realisation are understood. This was a discrepancy between an evaluation and a realisation focus towards IS value creation. An evaluation focus described IS-benefits as well-defined and measurable effects and a realisation focus spoke of establishing and managing an on-going place of value creation. The notion of valuescape was introduced in order to describe and support the understanding of IS value creation. Valuescape corresponded to a realisation focus and outlined a value configuration consisting of activities, logic, structure, drivers and role of IS.

Project Management Tools in Agile Embedded Systems Development

Agile methods have become increasingly popular in the field of software engineering. While agile methods are now generally considered applicable to software projects of many different kinds, they have not been widely adopted in embedded systems development. This is partly due to the natural constraints that are present in embedded systems development (e.g. hardware–software interdependencies) that challenge the utilization of agile values, principles and practices. The research in agile embedded systems development has been very limited, and this thesis tackles an even less researched theme related to it: the suitability of different project management tools in agile embedded systems development. The thesis covers the basic aspects of many different agile tool types from physical tools, such as task boards and cards, to web-based agile tools that offer all-round solutions for application lifecycle management. In addition to these two extremities, there is also a wide range of lighter agile tools that focus on the core agile practices, such as backlog management. Also other non-agile tools, such as bug trackers, can be used to support agile development, for instance, with plug-ins. To investigate the special tool requirements in agile embedded development, the author observed tool related issues and solutions in a case study involving three different companies operating in the field of embedded systems development. All three companies had a distinct situation in the beginning of the case and thus the tool solutions varied from a backlog spreadsheet built from scratch to plug-in development for an already existing agile software tool. Detailed reports are presented of all three tool cases. Based on the knowledge gathered from agile tools and the case study experiences, it is concluded that there are tool related issues in the pilot phase, such as backlog management and user motivation. These can be overcome in various ways epending on the type of a team in question. Finally, five principles are formed to give guidelines for tool selection and usage in agile embedded systems development.

Flow in porous media of oil-water systems

Fluid flow behaviour in porous media is a conundrum. Therefore, this research is focused on filtration-volumetric characterisation of fractured-carbonate sediments, coupled with their proper simulation. For this reason, at laboratory rock properties such as pore volume, permeability and porosity are measured, later phase permeabilities and oil recovery in function of flow rate are assessed. Furthermore, the rheological properties of three oils are measured and analysed. Finally based on rock and fluid properties, a model using COMSOL Multiphysics is built in order to compare the experimental and simulated results. The rock analyses show linear relation between flow rate and differential pressure, from which phase permeabilities and pressure gradient are determined, eventually the oil recovery under low and high flow rate is established. In addition, the oils reveal thixotropic properties as well as non-Newtonian behaviour described by Bingham model, consequently Carreau viscosity model for the used oil is given. Given these points, the model for oil and water is built in COMSOL Multiphysics, whereupon successfully the reciprocity between experimental and simulated results is analysed and compared. Finally, a two-phase displacement model is elaborated.

The role of management accounting systems and venture capital investors for start-up firms

The role of star-up firms in economy and the importance of venture capital investors for the growth of start-up firms have been highlighted in recent years. The growth challenges of start-up firms consist of fast changing environment, the availability of venture capital funding and the development of firm management in the growth phase. A growing number of studies have focused on management accounting systems and venture capital in start-up and growth firm context. In this thesis the role of management accounting systems and venture capital investors is considered in the growth phase of firm development. The theoretical objective of this thesis is to construct a theoretical framework in order to describe the importance of management accounting systems and venture capital investors in start-up firms. The practice orientated objective of this thesis is to study the application of management accounting systems and management accounting based information in start-up firms in high-technology industry as well as the impact of venture capital for management accounting system design. In addition, the growth challenges of start-up firms are studied in order to understand the context in which management accounting systems are used. The research approach of theoretical part is conceptual as the theoretical framework is constructed by combining literature on firm growth, management accounting and venture finance in order to analyse the phenomenon. The action-orientated research approach is appropriate for analysing and describing of the studied phenomenon through empirical evidence. The empirical evidence was collected through interviews with three experts in start-up firm accelerator centers, four representatives of start-up firms and one venture capital investor. The results indicate that the growth challenges of stat-up firms are not related to the development of management accounting systems. Managers of start-up firms expressed a positive attitude towards management accounting systems that improve efficiency of operations. In start-up firms flexible and adjustable management accounting practices, such as budgets, cash flow calculations and future-orientated analysis tools, are applied that support planning and coordination of operations. The results indicate that venture capital investors affect the provision and the quality of management accounting information during the investment process. In addition, venture capital investors enhance the use of management accounting information for internal coordination in start-up firms. By applying the theoretical framework in the analysis, it can be stated that by acting as support function management accounting systems facilitate start-up firms development.

Biotransformations of water insoluble substrates in aqueous, two-phase and encapsulated systems /

The biotransformation of water insoluble substrates by mammalian and bacterial cells has been problematic, since these whole cell reactions are primarily performed in an aqueous environment The implementation of a twophase or encapsulated system has the advantages of providing a low water system along with the physiological environment the cells require to sustain themselves. Encapsulation of mammalian cells by formation of polyamide capsules via interfacial polymerization illustrated that the cells could not survive this type of encapsulation process. Biotransformation of the steroid spironolactone [3] by human kidney carcinoma cells was performed in a substrate-encapsulated system, yielding canrenone [4] in 70% yield. Encapsulation of nitrile-metabolizing Rhodococcus rhodochrous cells using a polyamide membrane yielded leaky capsules, but biotransformation of 2-(4- chlorophenyl)-3-methylbutyronitrile (CPIN) [6] in a free cell system yielded CPIN amide [7] in 40% yield and 94% ee. A two-phase biotransformation of CPIN consisting of a 5:1 ratio of tris buffer, pH 7.2 to octane respectively, gave CPIN acid [8] in 30% yield and 97% ee. It was concluded that Rhodococcus rhodochrous ATCC 17895 contained a nonselective nitrile hydratase and a highly selective amidase enzyme.

Étude des mécanismes moléculaires influençant la variation de phase des adhésines P, F1651 et CS31A présentes chez des souches d'Escherichia coli pathogènes.

F1651, les pili Pap et l’antigène CS31A associé aux antigènes de surface K88 sont tout trois des membres de la famille de type P des facteurs d’adhérence jouant un rôle prépondérant lors de l’établissement d’une maladie causée par des souches Escherichia coli pathogènes, en particulier des souches d’E. coli pathogènes extra-intestinales (ExPEC, Extra-intestinal pathogenic E. coli). Leur expression est sous le contrôle d’un mécanisme de régulation transcriptionnel dépendant de l’état de méthylation de l’ADN, résultant dans l’existence de deux populations définies, l’une exprimant l’adhésine (population ON) et l’autre ne l’exprimant pas (population OFF). Malgré de fortes identités de séquences, ces trois systèmes diffèrent l’un de l’autre, principalement par le pourcentage de cellules ON rencontrées. Ainsi, quand CS31A est systématiquement orienté vers un état considéré comme OFF, F1651 présente une phase ON particulièrement élevée et Pap montre deux états OFF et ON bien distincts, selon le phénotype de départ. La protéine régulatrice sensible à la leucine (Lrp, Leucine-responsive regulatory protein) joue un rôle essentiel dans la réversibilité de ce phénomène épigénétique et il est supposé que les différences de séquences au niveau de la région régulatrice modifient la localisation à ces sites de fixation de Lrp; ce qui résulte, en final, aux différences de phase existant entre CS31A, F1651 et Pap.À l’aide de divers techniques parmi lesquelles l’utilisation de gènes rapporteurs, mutagénèses dirigées et d’analyse des interactions ADN-protéines in vitro, nous montrons dans ce présent projet que la phase OFF prédominante chez CS31A est principalement due à une faible interaction de Lrp avec la région distale de l’opéron clp, et que la présence d’un homologue du régulateur local PapI joue un rôle également clef dans la production de CS31A. Dans le cas de F1651, nous montrons dans cette étude que le taux élevé de cellules en phase ON est dû à une altération dans le maintien de Lrp sur les sites répresseurs 1-3. Ceci est dû à la présence de deux nucléotides spécifiques, situé de part et d’autre du site répresseur 1, qui défavorisent la fixation de Lrp sur ce site précis. Tout comme dans le cas de CS31A, la formation d’un complexe, activateur ou répresseur de la phase ON, dépend également de l’action de du régulatuer local FooI, qui favorise alors le déplacement de Lrp des sites répresseurs 1-3 vers les sites activateurs 4-6.

Influence de la phase d’usage dans les enjeux de la rénovation de bâtiments résidentiels écologiques : vers une approche diachronique

En Amérique du Nord, les pratiques actuelles de conception de l’industrie de la construction suscitent de nombreux et importants problèmes, tant au niveau environnemental, que social et économique. Certaines tendances conceptuelles, telles que l’industrialisation de la construction, le bâtiment vert, l’approche diachronique et la rationalisation spatiale proposent des moyens afin de répondre à cette problématique. La conception synchronique, qui ne se base encore que sur des besoins immédiats, produit des bâtiments statiques qui ne peuvent accommoder l’évolution des besoins. En plus de la phase d’usage qui se révèle la plus coûteuse en termes de consommation d’énergie, d’eau, de matériaux et de génération de déchets, le bâtiment statique est amené à subir de nombreuses rénovations, profondément délétères pour l’environnement et la situation économique des ménages. Dans une perspective d’opérationnalisation du développement durable, la problématique de recherche concerne la considération de la phase d’usage dans le processus conceptuel de l’habitation. Dans l’optique de favoriser une conception plutôt diachronique, 55 projets de rénovation résidentiels ont été analysés et comparés afin de décrire la nature et l’intensité des interventions effectuées. L’examen des plans avant/après rénovation a permis de quantifier le niveau d’intensité des interventions et ainsi, mettre en relief certaines tendances et récurrences des pratiques actuelles. Dans le but de valider si le bâtiment vert est en mesure de répondre aux enjeux environnementaux contemporains de l’habitation, les contenus de trois programmes de certification utilisés en Amérique du Nord, à savoir BOMA-BESt®, LEED®, et Living Building ChallengeTM, sont analysés. Une classification des stratégies proposées montre la répartition des préoccupations envers le bâtiment, les systèmes et l’usager. Une analyse permet de mettre en relief que les considérations semblent, de façon générale, cohérentes avec les impacts associés à l’habitation. Un examen plus ciblé sur la teneur et les objectifs des stratégies considérant l’usager permet l’émergence de deux ensembles thématiques : les cinq sources potentielles d’impacts (énergie, eau, matériaux, déchets et environnement intérieur), ainsi que les quatre thèmes reliés aux objectifs et aux finalités des stratégies (entretien et surveillance; sensibilisation et formation; modélisation et mesurage; comportement et habitude). La discussion a permis d’émettre des pistes d’écoconception pour permettre à l’habitation d’accommoder l’évolution des besoins des occupants, à savoir la « démontabilité », l’aptitude à l’évolution et l’accessibilité. Des recommandations, telles que la nécessité de mieux prendre en compte l’usager comme facteur d’influence des impacts occasionnés par la phase d’usage, sont ensuite proposées. D’autres suggestions appellent à une concrétisation de la performance en suscitant l’implication, l’engagement, la responsabilisation et l’autonomisation des occupants. Enfin, il semble que certaines modifications des programmes de certification et de la législation en vigueur pourraient favoriser l’émergence d’une vision nouvelle concernant la nécessaire réduction de la superficie habitable. Toutes ces opportunités d’amélioration ont le potentiel de mener ce secteur vers une démarche plus globale et systémique, tout en bonifiant de façon majeure les implications environnementales, économiques et sociales de l’habitation.

Photopyroelectric study of thermal properties and phase transitions in selected solids

This thesis presents in detail. the theoretical developments and calculations which are used for the simultaneous determination of thermal parameters, namely thermal diffusivity (a). thermal effusivity (e), thermal conductivity (K) and heat capacity (cr ) employing photopyroelectric technique. In our calculations. we have assumed that the pyroelectric detector is supported on a copper backing. so that there will be sufficient heat exchange between the heated pyroelectric detector and the backing so that the signal fluctuations are reduced to a minimum. Since the PPE signal depends on the properties of the detector that are also temperature dependent. a careful temperature calibration of the system need to be carried out. APPE cell has been fabricated for the measurements that can be used to measure the thermal properties of solid samples from ~ 90 K to ~ 350 K. The cell has been calibrated using standard samples and the accuracy of the technique is found to be of the order of± 1%.In this thesis, we have taken up work n photopyroelectric investigation of thermal parameters of ferroelectric crystals such as Glycine phosphite (NH3CH2COOH3P03), Triglycine sulfate and Thiourea as well as mixed valence perovskites samples such as Lead doped Lanthanum Manganate (Lal_xPb~Mn03) Calcium doped (Lal_xCaxMnOJ) and Nickel doped Lanthanum Stroncium Cobaltate (Lao~Sro5Ni,Col_x03).The three ferroelectric crystals are prepared by the slow evaporation technique and the mixed valence perovskites by solid state reaction technique.Mixed valence perovskites, with the general formula RI_xA~Mn03 (R = La. Nd or Pr and A = Ba, Ca, Sr or Pb) have been materials of intense experimental and theoretical studies over the past few years. These materials show . colossal magneloresis/ance' (CMR) in samples with 0.2 < x < 0.5 in such a doping region, resistivity exhibits a peak at T = T p' the metal - insulator transition temperature. The system exhibits metallic characteristics with d %T > Oabove Tp (wherep is the resistivity) and insulating characteristics with d % T < 0 above T p. Despite intensive investigations on the CMR phenomena and associated electrical properties. not much work has been done on the variation of thermal properties of these samples. We have been quite successful in finding out the nature of anomaly associated with thermal properties when the sample undergoes M-I transition.The ferroelectric crystal showing para-ferroelectric phase transitions - Glycine phosphite. Thiourea and Triglycine sulfate - are studied in detail in order to see how well the PPE technique enables one to measure the thermal parameters during phase transitions. It is seen that the phase transition gets clearly reflected in the variation of thermal parameters. The anisotropy in thermal transport along different crystallographic directions are explained in terms of the elastic anisotropy and lattice contribution to the thermal conductivity. Interesting new results have been obtained on the above samples and are presented in three different chapters of the thesis.In summary. we have carried investigations of the variations of the thermal parameters during phase transitions employing photopyroelectric technique. The results obtained on different systems are important not only in understanding the physics behind the transitions but also in establishing the potentiality of the PPE tool. The full potential of PPE technique for the investigation of optical and thermal properties of materials still remains to be taken advantage of by workers in this field.

Phase effects on synchronization by dynamical relaying in delay-coupled systems

Synchronization in an array of mutually coupled systems with a finite time delay in coupling is studied using the Josephson junction as a model system. The sum of the transverse Lyapunov exponents is evaluated as a function of the parameters by linearizing the equation about the synchronization manifold. The dependence of synchronization on damping parameter, coupling constant, and time delay is studied numerically. The change in the dynamics of the system due to time delay and phase difference between the applied fields is studied. The case where a small frequency detuning between the applied fields is also discussed.

Immobilization of nitrifying bacterial consortia on wood particles for bioaugmenting nitrification in shrimp culture systems

Shrimp grow out systems under zero water exchange mode demand constant remediation of total ammonia nitrogen (TAN) andNO2 −–Nto protect the crop. To address this issue, aninexpensive and user-friendly technology using immobilized nitrifying bacterial consortia (NBC) as bioaugmentors has been developed and proposed for adoption in shrimp culture systems. Indigenous NBC stored at 4 °C were activated at room temperature (28 °C) and cultured in a 2 L bench top fermentor. The consortia, after enumeration by epifluorescence microscopy,were immobilized on delignifiedwood particles of a soft wood tree Ailantus altissima (300–1500 μm) having a surface area of 1.87m2 g−1. Selection of wood particle as substratumwas based on adsorption of NBC on to the particles, biofilm formation, and their subsequent nitrification potential. The immobilization could be achievedwithin 72 h with an initial cell density of 1×105 cells mL−1. On experimenting with the lowest dosage of 0.2 g (wet weight) immobilized NBC in 20 L seawater, a TAN removal rate of 2.4 mg L−1 within three days was observed. An NBC immobilization device could be developed for on site generation of the bioaugmentor preparation as per requirement. The product of immobilization never exhibited lag phase when transferred to fresh medium. The extent of nitrification in a simulated systemwas two times the rate observed in the control systems suggesting the efficacy in real life situations. The products of nitrification in all experiments were undetectable due to denitrifying potency, whichmade the NBC an ideal option for biological nitrogen removal. The immobilized NBC thus generated has been named TANOX (Total Ammonia Nitrogen Oxidizer)