Do romantic partners' responses to entry dyspareunia affect women's experience of pain? : the roles of catastrophizing and self-efficacy.

Introduction Entry dyspareunia is a sexual health concern which affects about 21% of women in the general population. Characterized by pain provoked during vaginal penetration, introital dyspareunia has been shown by controlled studies to have a negative impact on the psychological well-being, sexual function, sexual satisfaction, and quality of life of afflicted women. Many cognitive and affective variables may influence the experience of pain and associated psychosexual problems. However, the role of the partner's cognitive responses has been studied very little. Aim The aim of the present study was to examine the associations between partners' catastrophizing and their perceptions of women's self-efficacy at managing pain on one side and women's pain intensity, sexual function, and sexual satisfaction on the other. Methods One hundred seventy-nine heterosexual couples (mean age for women = 31, SD = 10.0; mean age for men = 33, SD = 10.6) in which the woman suffered from entry dyspareunia participated in the study. Both partners completed quantitative measures. Women completed the Pain Catastrophizing Scale and the Painful Intercourse Self-Efficacy Scale. Men completed the significant-other versions of these measures. Main Outcome Measures Dependent measures were women's responses to (i) the Pain Numeric Visual Analog Scale; (ii) the Female Sexual Function Index; and (iii) the Global Measure of Sexual Satisfaction scale. Results Controlled for women's pain catastrophizing and self-efficacy, results indicate that higher levels of partner-perceived self-efficacy and lower levels of partner catastrophizing are associated with decreased pain intensity in women with entry dyspareunia, although only partner catastrophizing contributed unique variance. Partner-perceived self-efficacy and catastrophizing were not significantly associated with sexual function or satisfaction in women. Conclusions The findings suggest that partners' cognitive responses may influence the experience of entry dyspareunia for women, pointing toward the importance of considering the partner when treating this sexual health problem.

Provoked vestibulodynia : mediators of the associations between partner responses, pain, and sexual satisfaction.

Provoked vestibulodynia (PVD) is a chronic, recurrent vulvo-vaginal pain condition affecting 12% of the general population, and is associated with sexual dysfunction, psychological distress, and reduced quality of life. There is growing interest in the role of interpersonal variables in PVD, which have been widely neglected. In a sample of 175 couples, the present study examined the mediating roles of partner and participant catastrophizing and self-efficacy in the association between solicitous partner responses and pain intensity, and that of dyadic adjustment in the association between solicitous and negative partner responses and sexual satisfaction. Couples completed measures of partner responses, catastrophizing, self-efficacy, dyadic adjustment, and depression. Women also completed measures of pain, sexual satisfaction, and sexual function. Controlling for depression and solicitousness perceived by the other member of the couple, catastrophizing and self-efficacy partially mediated the association between higher solicitous responses and higher pain during intercourse, accounting for 26 and 25% of the variance in this association for participant and partner-perceived responses, respectively. For both participant and partners, only pain catastrophizing was a unique mediator. Controlling for depression, sexual function and partner-perceived responses, dyadic adjustment partially mediated the association between higher participant-perceived solicitous responses and higher sexual satisfaction, and between higher participant-perceived negative responses and lower sexual satisfaction, accounting for 26% of the variance in each association. The current findings suggest that catastrophizing and dyadic adjustment may constitute a route by which partner responses exacerbate pain and increase or decrease sexual satisfaction in PVD couples.

Harmful or helpful : perceived solicitous and facilitative partner responses are differentially associated with pain and sexual satisfaction in women with provoked vestibulodynia.

Introduction.  Provoked vestibulodynia (PVD) is a highly prevalent vulvovaginal pain condition that negatively affects women's emotional, sexual, and relationship well-being. Recent studies have investigated the role of interpersonal variables, including partner responses. Aim.  We examined whether solicitous and facilitative partner responses were differentially associated with vulvovaginal pain and sexual satisfaction in women with PVD by examining each predictor while controlling for the other. Methods.  One hundred twenty-one women (M age = 30.60, SD = 10.53) with PVD or self-reported symptoms of PVD completed the solicitous subscale of the spouse response scale of the Multidimensional Pain Inventory, and the facilitative subscale of the Spouse Response Inventory. Participants also completed measures of pain, sexual function, sexual satisfaction, trait anxiety, and avoidance of pain and sexual behaviors (referred to as “avoidance”). Main Outcome Measures.  Dependent measures were the (i) Pain Rating Index of the McGill Pain Questionnaire with reference to pain during vaginal intercourse and (ii) Global Measure of Sexual Satisfaction Scale. Results.  Controlling for trait anxiety and avoidance, higher solicitous partner responses were associated with higher vulvovaginal pain intensity (β = 0.20, P = 0.03), and higher facilitative partner responses were associated with lower pain intensity (β = −0.20, P = 0.04). Controlling for sexual function, trait anxiety, and avoidance, higher facilitative partner responses were associated with higher sexual satisfaction (β = 0.15, P = 0.05). Conclusions.  Findings suggest that facilitative partner responses may aid in alleviating vulvovaginal pain and improving sexual satisfaction, whereas solicitous partner responses may contribute to greater pain.

L'implication de la Cycline B dans le processus de cytocinèse

Un dérèglement du cycle cellulaire peut causer le cancer. Lors de la cytocinèse un anneau contractile d’actine et de myosine se forme, se contracte, et donne un anneau du midbody qui mène à l’abscision. Le processus de cytocinèse est sous le contrôle de protéines telles que la GTPase Rho qui active la cytocinèse et les cyclines-Cdks qui l'inhibent. La Drosophile possède 3 cyclines mitotiques CycA/ CycB/ CycB3 qui sont successivement dégradées en fin de mitose et permettent l'initiation de la cytocinèse. La dernière étape d’abscission est un phénomène qui reste encore peu connu. Les protéines Vps4 et CHMP4C liées à ANCHR vont, sous la dépendance de la kinase Aurora B, promouvoir l’abscision mais, suite à quelques études récentes, il semble y avoir une implication de la cycline B. Ici, le but était de tester l’implication de cette cycline dans les processus de cytocinèse et d’abscision, elle a été menée par microscopie à haute résolution en temps réel avec des cellules S2 de l’organisme Drosophila melanogaster par le suivi de protéines recombinantes fluorescentes. L’étude a été divisée en deux axes : gain et perte de fonction par l’intermédiaire respectivement de la protéine Cycline B recombinante stable, non dégradable (CycBstable-GFP) et l’inhibition par l’utilisation d’ARN double brin (ARNdb) sur l’endogène. La CycBstable-GFP a perturbé la cytocinèse en induisant plusieurs anneaux contractiles et midbodies. En revanche la réduction de l’expression de CycB n'a pas eu d’effet observable, et elle ne semble pas avoir d’action sur l’abscission malgré le recrutement de CycB-GFP au midbody tardif. En revanche la protéine Cdk1 semble avoir un rôle dans l'abscision puisque sa réduction d’expression a induit un délai. Elle a donc une implication potentielle sur la cytocinèse.

Impact des cavines sur le phénotype invasif et inflammatoire des cellules souches mésenchymateuses

L’évolution d’une cellule tumorale initiée à une tumeur solide nécessite, à chaque étape, un microenvironnement favorable à sa survie et à sa croissance. Le microenvironnement tumoral est comparé à un foyer d’inflammation chronique dont la composition cellulaire et moléculaire est complexe. Les cellules souches mésenchymateuses (CSM) représentent l’un des principaux acteurs cellulaires présents. Elles migrent vers les sites tumoraux où elles soutiennent l’inflammation, l’angiogenèse et le développement tumoral en activant plusieurs voies de signalisation. Une des voies majeures qui contribuent à l’inflammation est la voie de signalisation NF-B. L’initiation de cette voie provient de la membrane cellulaire entre autres des cavéoles. Nous soumettons l’hypothèse que l’une des cavines, protéines associées aux cavéoles, modulerait le phénotype inflammatoire etou migratoire dans les CSM traitées à la cytokine TNF- (facteur de nécrose tumorale ) en modulant la voie de signalisation NF-B. En effet, nous avons observé une régulation à la hausse de l’expression de la COX-2 (cyclooxygénase-2) et une diminution de l’expression d’IκB qui sont synonymes de l’activation de la voie NF-B dans les CSM que nous avons traitées au TNF-. Nous avons trouvé que le TNF- induit la migration des CSM, et que la répression génique de la Cavine-2 augmente significativement la migration des CSM traitées par le TNF-. La répression génique de la Cavine-2 vient aussi amplifier la tubulogenèse dans les CSM en réponse au TNF-. D’un point de vue moléculaire, la répression génique de la Cavine-2 a montré une très forte amplification de l'expression protéique de la COX-2 dans les CSM en réponse au TNF-. Dans ces mêmes cellules où la Cavine-2 a été réprimée, et suite à un traitement au TNF-, le pic de phosphorylation est plus intense et la courbe de phosphorylation est plus prolongée dans le temps. Ces observations nous permettent d’affirmer que la Cavine-2 a un rôle répresseur sur l’expression de COX-2. Collectivement, nos résultats montrent que la Cavine-2 peut être proposée comme un gène suppresseur de tumeur et est de ce fait, une bonne cible thérapeutique dans les CSM qui permettraient d’agir à des stades précoces du développement tumoral.

Characterization of Selected Photonic Materials and Systems Using Photoacoustic Technique

The photoacoustic investigations carried out on different photonic materials are presented in this thesis. Photonic materials selected for the investigation are tape cast ceramics, muItilayer dielectric coatings, organic dye doped PVA films and PMMA matrix doped with dye mixtures. The studies are performed by the measurement of photoacoustic signal generated as a result of modulated cw laser irradiation of samples. The gas-microphone scheme is employed for the detection of photoacoustic signal. The different measurements reported here reveal the adaptability and utility of the PA technique for the characterization of photonic materials.Ceramics find applications in the field of microelectronics industry. Tape cast ceramics are the building blocks of many electronic components and certain ceramic tapes are used as thermal barriers. The thermal parameters of these tapes will not be the same as that of thin films of the same materials. Parameters are influenced by the presence of foreign bodies in the matrix and the sample preparation technique. Measurements are done on ceramic tapes of Zirconia, Zirconia-Alumina combination, barium titanate, barium tin titanate, silicon carbide, lead zirconate titanateil'Z'T) and lead magnesium niobate titanate(PMNPT). Various configurations viz. heat reflection geometry and heat transmission geometry of the photoacoustic technique have been used for the evaluation of different thermal parameters of the sample. Heat reflection geometry of the PA cell has been used for the evaluation of thermal effusivity and heat transmission geometry has been made use of in the evaluation of thermal diffusivity. From the thermal diffusivity and thermal effusivity values, thermal conductivity is also calculated. The calculated values are nearly the same as the values reported for pure materials. This shows the feasibility of photoacoustic technique for the thermal characterization of ceramic tapes.Organic dyes find applications as holographic recording medium and as active media for laser operations. Knowledge of the photochemical stability of the material is essential if it has to be used tor any of these applications. Mixing one dye with another can change the properties of the resulting system. Through careful mixing of the dyes in appropriate proportions and incorporating them in polymer matrices, media of required stability can be prepared. Investigations are carried out on Rhodamine 6GRhodamine B mixture doped PMMA samples. Addition of RhB in small amounts is found to stabilize Rh6G against photodegradation and addition of Rh6G into RhB increases the photosensitivity of the latter. The PA technique has been successfully employed for the monitoring of dye mixture doped PMMA sample. The same technique has been used for the monitoring of photodegradation ofa laser dye, cresyl violet doped polyvinyl alcohol also.Another important application of photoacoustic technique is in nondestructive evaluation of layered samples. Depth profiling capability of PA technique has been used for the non-destructive testing of multilayer dielectric films, which are highly reflecting in the wavelength range selected for investigations. Eventhough calculation of thickness of the film is not possible, number of layers present in the system can be found out using PA technique. The phase plot has clear step like discontinuities, the number of which coincides with the number of layers present in the multilayer stack. This shows the sensitivity of PA signal phase to boundaries in a layered structure. This aspect of PA signal can be utilized in non-destructive depth profiling of reflecting samples and for the identification of defects in layered structures.

Studies on energy exchange between sea and atmosphere from the indian ocean with special reference to arabian sea and bay of bengal

There are only a few attempts in the Indian ocean to evolve reliable climatic models of energy exchange fluxes and to study their inter annul variations. Large space scale and time history of the flux fields could be estimated by the bulk aerodynamic exchange and radiation equation, making use of the climatic normal’s of the related parameters derived from the remarkably good amount of surface marine observations compiled and made available on magnetic tape TDF II by the national climatic centre of NOAA for the period of years 1854 –early 1973. In this thesis the author has made an attempt to calculate the thermal energy exchange fluxes in a meaningful way, using the bulk aerodynamic coefficients which depend on the changes in the wind speed. The spatial and temporal distribution of the exchanges of energy between the ocean and atmosphere , are presented and their impact on the climatic variations of the Indian ocean are discussed from the point of view of predominating air sea interaction processes.

An investigation on the effects of Ag addition in the powder — in tube processing of long multifilamentary (Bi,Pb) - 2223/Ag superconducting tapes

It is important that long superconducting tape must have desired strain tolerance (less reduction of Jc with applied strains) and stress tolerance (less reduction of JC in applied stresses) for its use as coils and magnets. Ag addition to the BPSCCO system has many advantages with its physical and chemical inertness to the system, reduces the processing temperature, and promotes the grain growth, grain alignment and connectivity. All these not only enhance the critical current density of the tapes but also improve the mechanical properties. But the published results show very much scattering on the type of Ag additive to be selected, method of addition and its optimum percentage. Also there are some negative reports in this regard. The present work has been undertaken to study the effect of silver addition in different forms (Ag powder, Ag2O, AgNO3) on the superconducting and mechanical properties of (Bi,Pb)-2223/Ag tapes and to find out a suitable form of Ag additive and its optimum percentage to have better superconducting and mechanical properties. Also it is the aim of the present work is to optimise the process parameters needed to prepare (Bi,Pb)-2223/Ag multifilamentary tapes of length ~ 12 m in solenoid and pancake coil forms with good critical current density and homogeneity of J C along the length of the tapes.

Studies On Preparation And Characterization Of Hts Current Leads Using Multifilamentary Ag And Ag-Alloy Sheathed (Bi,Pb)-2223 Superconducting Tapes

The application vistas of superconductors have widened very much since the discovery of high TC superconductors (HTS) as many of the applications can be realised at 77 K rather than going down to 4.2 K, the liquid He temperature. One such application is the HTS current lead which is used to connect a superconducting system with a room temperature power source. Minimising heat leak to the cryogenic environment is the main advantage of introducing current leads into superconducting systems. The properties of HTSS likes zero resistance (avoiding joule heating) and very low thermal conductivity (minimized conductive heat transfer) make them ideal candidates to be used as current leads. There are two forms of HTS current leads. (i) bulk form (tube or rod) prepared either from YBCO or BSCCO and (ii) tape form prepared from Bi-2223 multifilamentary tapes. The tape form of current leads has many advantages with respect to the mechanical and thermal stability related criteria. Crucial information on various aspects of HTS current lead development are not available in the literature as those are kept proprietary by various companies around the world. The present work has been undertaken to tailor the properties of multifilamentary tapes for the current lead application and to optimise the processing parameters of the same for enhanced critical current density and field tolerance. Also it is the aim of the present investigation is to prepare prototype current leads engineered for operation in conduction cooled mode and test them for operational stability

Tailoring Magnetic Properties of Co-Fe Thin Films by Topographical Modifications Using Thermal Annealing and Swift Heavy Ion Irradiation and Fabrication of Magnetoelectric Multilayers for Device Applications

Magnetism and magnetic materials have been playing a lead role in improving the quality of life. They are increasingly being used in a wide variety of applications ranging from compasses to modern technological devices. Metallic glasses occupy an important position among magnetic materials. They assume importance both from a scientific and an application point of view since they represent an amorphous form of condensed matter with significant deviation from thermodynamic equilibrium. Metallic glasses having good soft magnetic properties are widely used in tape recorder heads, cores of high-power transformers and metallic shields. Superconducting metallic glasses are being used to produce high magnetic fields and magnetic levitation effect. Upon heat treatment, they undergo structural relaxation leading to subtle rearrangements of constituent atoms. This leads to densification of amorphous phase and subsequent nanocrystallisation. The short-range structural relaxation phenomenon gives rise to significant variations in physical, mechanical and magnetic properties. Magnetic amorphous alloys of Co-Fe exhibit excellent soft magnetic properties which make them promising candidates for applications as transformer cores, sensors, and actuators. With the advent of microminiaturization and nanotechnology, thin film forms of these alloys are sought after for soft under layers for perpendicular recording media. The thin film forms of these alloys can also be used for fabrication of magnetic micro electro mechanical systems (magnetic MEMS). In bulk, they are drawn in the form of ribbons, often by melt spinning. The main constituents of these alloys are Co, Fe, Ni, Si, Mo and B. Mo acts as the grain growth inhibitor and Si and B facilitate the amorphous nature in the alloy structure. The ferromagnetic phases such as Co-Fe and Fe-Ni in the alloy composition determine the soft magnetic properties. The grain correlation length, a measure of the grain size, often determines the soft magnetic properties of these alloys. Amorphous alloys could be restructured in to their nanocrystalline counterparts by different techniques. The structure of nanocrystalline material consists of nanosized ferromagnetic crystallites embedded in an amorphous matrix. When the amorphous phase is ferromagnetic, they facilitate exchange coupling between nanocrystallites. This exchange coupling results in the vanishing of magnetocrystalline anisotropy which improves the soft magnetic properties. From a fundamental perspective, exchange correlation length and grain size are the deciding factors that determine the magnetic properties of these nanocrystalline materials. In thin films, surfaces and interfaces predominantly decides the bulk property and hence tailoring the surface roughness and morphology of the film could result in modified magnetic properties. Surface modifications can be achieved by thermal annealing at various temperatures. Ion irradiation is an alternative tool to modify the surface/structural properties. The surface evolution of a thin film under swift heavy ion (SHI) irradiation is an outcome of different competing mechanism. It could be sputtering induced by SHI followed by surface roughening process and the material transport induced smoothening process. The impingement of ions with different fluence on the alloy is bound to produce systematic microstructural changes and this could effectively be used for tailoring magnetic parameters namely coercivity, saturation magnetization, magnetic permeability and remanence of these materials. Swift heavy ion irradiation is a novel and an ingenious tool for surface modification which eventually will lead to changes in the bulk as well as surface magnetic property. SHI has been widely used as a method for the creation of latent tracks in thin films. The bombardment of SHI modifies the surfaces or interfaces or creates defects, which induces strain in the film. These changes will have profound influence on the magnetic anisotropy and the magnetisation of the specimen. Thus inducing structural and morphological changes by thermal annealing and swift heavy ion irradiation, which in turn induce changes in the magnetic properties of these alloys, is one of the motivation of this study. Multiferroic and magneto-electrics is a class of functional materials with wide application potential and are of great interest to material scientists and engineers. Magnetoelectric materials combine both magnetic as well as ferroelectric properties in a single specimen. The dielectric properties of such materials can be controlled by the application of an external magnetic field and the magnetic properties by an electric field. Composites with magnetic and piezo/ferroelectric individual phases are found to have strong magnetoelectric (ME) response at room temperature and hence are preferred to single phasic multiferroic materials. Currently research in this class of materials is towards optimization of the ME coupling by tailoring the piezoelectric and magnetostrictive properties of the two individual components of ME composites. The magnetoelectric coupling constant (MECC) (_ ME) is the parameter that decides the extent of interdependence of magnetic and electric response of the composite structure. Extensive investigates have been carried out in bulk composites possessing on giant ME coupling. These materials are fabricated by either gluing the individual components to each other or mixing the magnetic material to a piezoelectric matrix. The most extensively investigated material combinations are Lead Zirconate Titanate (PZT) or Lead Magnesium Niobate-Lead Titanate (PMNPT) as the piezoelectric, and Terfenol-D as the magnetostrictive phase and the coupling is measured in different configurations like transverse, longitudinal and inplane longitudinal. Fabrication of a lead free multiferroic composite with a strong ME response is the need of the hour from a device application point of view. The multilayer structure is expected to be far superior to bulk composites in terms of ME coupling since the piezoelectric (PE) layer can easily be poled electrically to enhance the piezoelectricity and hence the ME effect. The giant magnetostriction reported in the Co-Fe thin films makes it an ideal candidate for the ferromagnetic component and BaTiO3 which is a well known ferroelectric material with improved piezoelectric properties as the ferroelectric component. The multilayer structure of BaTiO3- CoFe- BaTiO3 is an ideal system to understand the underlying fundamental physics behind the ME coupling mechanism. Giant magnetoelectric coupling coefficient is anticipated for these multilayer structures of BaTiO3-CoFe-BaTiO3. This makes it an ideal candidate for cantilever applications in magnetic MEMS/NEMS devices. SrTiO3 is an incipient ferroelectric material which is paraelectric up to 0K in its pure unstressed form. Recently few studies showed that ferroelectricity can be induced by application of stress or by chemical / isotopic substitution. The search for room temperature magnetoelectric coupling in SrTiO3-CoFe-SrTiO3 multilayer structures is of fundamental interest. Yet another motivation of the present work is to fabricate multilayer structures consisting of CoFe/ BaTiO3 and CoFe/ SrTiO3 for possible giant ME coupling coefficient (MECC) values. These are lead free and hence promising candidates for MEMS applications. The elucidation of mechanism for the giant MECC also will be the part of the objective of this investigation.

Restarting automata with restricted utilization of auxiliary symbols

The restarting automaton is a restricted model of computation that was introduced by Jancar et al. to model the so-called analysis by reduction, which is a technique used in linguistics to analyze sentences of natural languages. The most general models of restarting automata make use of auxiliary symbols in their rewrite operations, although this ability does not directly correspond to any aspect of the analysis by reduction. Here we put restrictions on the way in which restarting automata use auxiliary symbols, and we investigate the influence of these restrictions on their expressive power. In fact, we consider two types of restrictions. First, we consider the number of auxiliary symbols in the tape alphabet of a restarting automaton as a measure of its descriptional complexity. Secondly, we consider the number of occurrences of auxiliary symbols on the tape as a dynamic complexity measure. We establish some lower and upper bounds with respect to these complexity measures concerning the ability of restarting automata to recognize the (deterministic) context-free languages and some of their subclasses.

Shrinking restarting automata

Restarting automata are a restricted model of computation that was introduced by Jancar et.al. to model the so-called analysis by reduction. A computation of a restarting automaton consists of a sequence of cycles such that in each cycle the automaton performs exactly one rewrite step, which replaces a small part of the tape content by another, even shorter word. Thus, each language accepted by a restarting automaton belongs to the complexity class $CSL cap NP$. Here we consider a natural generalization of this model, called shrinking restarting automaton, where we do no longer insist on the requirement that each rewrite step decreases the length of the tape content. Instead we require that there exists a weight function such that each rewrite step decreases the weight of the tape content with respect to that function. The language accepted by such an automaton still belongs to the complexity class $CSL cap NP$. While it is still unknown whether the two most general types of one-way restarting automata, the RWW-automaton and the RRWW-automaton, differ in their expressive power, we will see that the classes of languages accepted by the shrinking RWW-automaton and the shrinking RRWW-automaton coincide. As a consequence of our proof, it turns out that there exists a reduction by morphisms from the language class $cL(RRWW)$ to the class $cL(RWW)$. Further, we will see that the shrinking restarting automaton is a rather robust model of computation. Finally, we will relate shrinking RRWW-automata to finite-change automata. This will lead to some new insights into the relationships between the classes of languages characterized by (shrinking) restarting automata and some well-known time and space complexity classes.

CD-Systems of Restarting Automata

Die vorliegende Arbeit behandelt Restartautomaten und Erweiterungen von Restartautomaten. Restartautomaten sind ein Werkzeug zum Erkennen formaler Sprachen. Sie sind motiviert durch die linguistische Methode der Analyse durch Reduktion und wurden 1995 von Jancar, Mráz, Plátek und Vogel eingeführt. Restartautomaten bestehen aus einer endlichen Kontrolle, einem Lese/Schreibfenster fester Größe und einem flexiblen Band. Anfänglich enthält dieses sowohl die Eingabe als auch Bandbegrenzungssymbole. Die Berechnung eines Restartautomaten läuft in so genannten Zyklen ab. Diese beginnen am linken Rand im Startzustand, in ihnen wird eine lokale Ersetzung auf dem Band durchgeführt und sie enden mit einem Neustart, bei dem das Lese/Schreibfenster wieder an den linken Rand bewegt wird und der Startzustand wieder eingenommen wird. Die vorliegende Arbeit beschäftigt sich hauptsächlich mit zwei Erweiterungen der Restartautomaten: CD-Systeme von Restartautomaten und nichtvergessende Restartautomaten. Nichtvergessende Restartautomaten können einen Zyklus in einem beliebigen Zustand beenden und CD-Systeme von Restartautomaten bestehen aus einer Menge von Restartautomaten, die zusammen die Eingabe verarbeiten. Dabei wird ihre Zusammenarbeit durch einen Operationsmodus, ähnlich wie bei CD-Grammatik Systemen, geregelt. Für beide Erweiterungen zeigt sich, dass die deterministischen Modelle mächtiger sind als deterministische Standardrestartautomaten. Es wird gezeigt, dass CD-Systeme von Restartautomaten in vielen Fällen durch nichtvergessende Restartautomaten simuliert werden können und andererseits lassen sich auch nichtvergessende Restartautomaten durch CD-Systeme von Restartautomaten simulieren. Des Weiteren werden Restartautomaten und nichtvergessende Restartautomaten untersucht, die nichtdeterministisch sind, aber keine Fehler machen. Es zeigt sich, dass diese Automaten durch deterministische (nichtvergessende) Restartautomaten simuliert werden können, wenn sie direkt nach der Ersetzung einen neuen Zyklus beginnen, oder ihr Fenster nach links und rechts bewegen können. Außerdem gilt, dass alle (nichtvergessenden) Restartautomaten, die zwar Fehler machen dürfen, diese aber nach endlich vielen Zyklen erkennen, durch (nichtvergessende) Restartautomaten simuliert werden können, die keine Fehler machen. Ein weiteres wichtiges Resultat besagt, dass die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt den Zyklus beenden, genau die deterministischen kontextfreien Sprachen erkennen, wohingegen die deterministischen monotonen nichtvergessenden Restartautomaten mit Hilfssymbolen ohne diese Einschränkung echt mehr, nämlich die links-rechts regulären Sprachen, erkennen. Damit werden zum ersten Mal Restartautomaten mit Hilfssymbolen, die direkt nach dem Ersetzungsschritt ihren Zyklus beenden, von Restartautomaten desselben Typs ohne diese Einschränkung getrennt. Besonders erwähnenswert ist hierbei, dass beide Automatentypen wohlbekannte Sprachklassen beschreiben.

Untersuchungen zum Vorkommen und molekularen Mechanismus der Biofilm-Bildung bei Enterokokken aus verschiedenen klinischen Bereichen

Im Rahmen der vorliegenden Arbeit wurde eine größere Anzahl an E. faecalis Isolaten aus Vaginalabstrichen, erstmals insbesondere von Patientinnen, die an Bakterieller Vaginose litten, untersucht und mit E. faecalis Stämme aus verschiedenen anderen klinischen Bereichen auf das Vorkommen von Virulenzfaktoren verglichen. Weiterhin wurden Korrelationen zwischen bestimmten Faktoren und der Menge an produziertem Biofilm erstellt, um mögliche Zusammenhänge zum Mechanismus der Biofilm-Bildung zu erfassen. Mittels statistischer Analysen konnte hinsichtlich der 150 untersuchten E. faecalis Isolate nachgewiesen werden, dass keine signifikanten Unterschiede der Inzidenzen von Virulenzfaktoren (esp, asa1, gelE, GelE, cylA, β-Hämolyse) zwischen den Stämmen der verschiedenen Herkunftsbereiche bestanden. In Bezug auf das Auftreten von Biofilm-Bildung zeigte sich ein erhöhtes Vorkommen bei Stämmen aus Urin sowie invasiver Herkunft (insgesamt jeweils ca. 70 % mäßige und starke Biofilm-Bildner) im Vergleich zu E. faecalis Isolaten aus Wunden oder Faeces (je ca. 40 %). Statistische Auswertungen bzgl. des Zusammenhangs eines oder einer Kombination von Virulenzfaktoren mit der Menge an gebildetem Biofilm wiesen darauf hin, dass Isolate, die das esp Gen besaßen, in erhöhtem Maße zur Biofilm-Bildung befähigt waren. Dies zeigte einen gewissen Einfluss des Zellwandproteins auf die Fähigkeit zur Biofilm-Bildung bei E. faecalis. Allerdings wurden stets auch Stämme identifiziert, die die Fähigkeit zur Biofilm-Bildung trotz des Fehlens der jeweils untersuchten genetischen Determinante bzw. der Determinanten aufwiesen, so dass auf das Vorhandensein weiterer, unbekannter Einflussfaktoren auf den Mechanismus der Biofilm-Bildung bei E. faecalis geschlossen werden konnte. Unter 78 untersuchten E. faecium Isolaten aus verschiedenen klinischen Bereichen konnte lediglich ein Stamm (1,3 %) als mäßiger Biofilm-Bildner charakterisiert werden, so dass die Fähigkeit bei dieser Spezies in der hier untersuchten Region unter diesen Bedingungen kaum nachgewiesen werden konnte. Einen Schwerpunkt dieser Arbeit bildete die Untersuchung zum Vorkommen von Virulenzfaktoren und Biofilm-Bildung bei E. faecalis Isolaten aus Vaginalabstrichen. Bzgl. des Auftretens von Virulenzfaktoren und Biofilm-Produktion konnte kein Unterschied zwischen Stämmen assoziiert mit Bakterieller Vaginose und Isolaten einer Vergleichsgruppe festgestellt werden. Allerdings zeigte eine Gegenüberstellung mit den untersuchten E. faecalis Stämmen aus anderen klinischen Bereichen, dass die 80 Isolate aus Vaginalabstrichen eine ähnlich hohe Inzidenz bestimmter Virulenzfaktoren wie Stämme aus Faeces, Urin, Wunden oder invasiver Herkunft sowie eine mit den Isolaten aus Urin und invasiver Herkunft vergleichbar hohe Fähigkeit zur Biofilm-Bildung aufwiesen (ca. 75 % mäßige und starke Biofilm-Bildner). Dies deutete auf eine Verbreitung der Biofilm-Bildungsfähigkeit bei E. faecalis Stämmen der Vaginalflora und somit auf eine große Bedeutung der Eigenschaft für Isolate dieser Herkunft hin. Die statistische Auswertung der Korrelationen von Virulenzfaktoren mit der Menge an gebildetem Biofilm lieferte ähnliche Ergebnisse wie die Analysen bzgl. der 150 E. faecalis Isolate aus anderen klinischen Bereichen und untermauerte die Annahme, dass zusätzliche Faktoren zu den hier untersuchten Determinanten bei E. faecalis vorhanden sein müssen, die Einfluss auf den Mechanismus der Biofilm-Bildung nehmen. Deshalb konzentrierte sich ein weiterer Teil der vorliegenden Arbeit auf die Herstellung und Charakterisierung von E. faecalis Biofilm-Spontanmutanten, um bisher noch ungeklärte Mechanismen oder neue Faktoren zu erkennen, die Einfluss auf die Biofilm-Bildung bei E. faecalis nehmen. Die Untersuchung einer Mutante (1.10.16) und ihres Wildtypstamms lieferte erstmals den phänotypischen Nachweis des HMW-Komplexes der drei Bee-Proteine sowie die Identifizierung konservierter Pili-Motive dieser Proteine. Des Weiteren schien die in diesem Cluster ebenfalls codierte Sortase-1 dasjenige Enzym zu sein, das höchstwahrscheinlich die Bindung des Proteins Bee-2 innerhalb dieses HMW-Komplexes katalysiert. Insofern lieferten diese Untersuchungen neue, konkrete Hinweise zur Rolle des bee Genclusters bei der Pili-Biogenese und Biofilm-Bildung von E. faecalis. Darüber hinaus stellen Erkenntnisse aus der Charakterisierung von zwei weiteren hergestellten Biofilm-Spontanmutanten viel versprechende Ausgangspunkte für zukünftige Untersuchungen dar, die ein weitergehendes Verständnis der molekularen Mechanismen der Biofilm-Bildung bei E. faecalis erzielen könnten.

Heat stress response for physiological traits in dairy and dual purpose cattle populations on phenotypic and genetic scales

The main objective of this thesis was to determine the potential impact of heat stress (HS) on physiological traits of lactating cows and semen quality of bulls kept in a temperate climate. The thesis is comprised of three studies. An innovative statistical modeling aspect common to all three studies was the application of random regression methodology (RRM) to study the phenotypic and genetic trajectory of traits in dependency of a continuous temperature humidity index (THI). In the first study, semen quality and quantity traits of 562 Holstein sires kept on an AI station in northwestern Germany were analyzed in the course of THI calculated from data obtained from the nearest weather station. Heat stress was identified based on a decline in semen quality and quantity parameters. The identified general HS threshold (THI = 60) and the thermoneutal zone (THI in the range from 50 to 60) for semen production were lower than detected in studies conducted in tropical and subtropical climates. Even though adult bulls were characterized by higher semen productivity compared to younger bulls, they responded with a stronger semen production loss during harsh environments. Heritabilities (low to moderate range) and additive genetic variances of semen characteristics varied with different levels of THI. Also, based on genetic correlations genotype, by environment interactions were detected. Taken together, these findings suggest the application of specific selection strategies for specific climate conditions. In the second study, the effect of the continuous environmental descriptor THI as measured inside the barns on rectal temperatures (RT), skin temperatures (ST), vaginal temperatures (VT), respiration rates (RR), and pulse rate (PR) of lactating Holstein Friesian (HF) and dual-purpose German black pied cattle (DSN) was analyzed. Increasing HS from THI 65 (threshold) to THI 86 (maximal THI) resulted in an increase of RT by 0.6 °C (DSN) and 1 °C (HF), ST by 3.5 °C (HF) and 8 °C (DSN), VT by 0.3 °C (DSN), and RR by 47 breaths / minute (DSN), and decreased PR by 7 beats / minute (DSN). The undesired effects of rising THI on physiological traits were most pronounced for cows with high levels of milk yield and milk constituents, cows in early days in milk and later parities, and during summer seasons in the year 2014. In the third study of this dissertation, the genetic components of the cow’s physiological responses to HS were investigated. Heat stress was deduced from indoor THI measurements, and physiological traits were recorded on native DSN cows and their genetically upgraded crosses with Holstein Friesian sires in two experimental herds from pasture-based production systems reflecting a harsh environment of the northern part of Germany. Although heritabilities were in a low range (from 0.018 to 0.072), alterations of heritabilities, repeatabilities, and genetic components in the course of THI justify the implementation of genetic evaluations including heat stress components. However, low repeatabilities indicate the necessity of using repeated records for measuring physiological traits in German cattle. Moderate EBV correlations between different trait combinations indicate the potential of selection for one trait to simultaneously improve the other physiological attributes. In conclusion, bulls of AI centers and lactating cows suffer from HS during more extreme weather conditions also in the temperate climate of Northern Germany. Monitoring physiological traits during warm and humid conditions could provide precious information for detection of appropriate times for implementation of cooling systems and changes in feeding and management strategies. Subsequently, the inclusion of these physiological traits with THI specific breeding values into overall breeding goals could contribute to improving cattle adaptability by selecting the optimal animal for extreme hot and humid conditions. Furthermore, the recording of meteorological data in close distance to the cow and visualizing the surface body temperature by infrared thermography techniques might be helpful for recognizing heat tolerance and adaptability in cattle.