989 resultados para sugarcane harvester


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trinexapac-ethyl and sulfometuron-methyl are the most widely used ripeners in sugarcane. The application is performed by airborne spraying. Thus, if weather conditions are unfavorable, spray drift to neighboring areas may occur. The objective of this study was to assess the selectivity of the plant growth regulators trinexapac-ethyl and sulfometuron-methyl, used as sugarcane ripeners, to eucalyptus (Eucalyptus urograndis) young plants. The experiment was installed in an eucalyptus commercial yield area, in the municipality of Tambaú, state of São Paulo, Brazil, and arranged in a 2 x 8 factorial design in randomized blocks with four replications. The treatments studied were trinexapac-ethyl and sulfometuron-methyl, sprayed in eight doses, 0; 1.0; 2.5; 5.0; 10; 25; 50 and 100% of the dose used in sugarcane as ripeners (200 g ha-1 of trinexapac-ethyl and 15 g ha-1 of sulfometuron-methyl). Chemical ripeners were applied on eucalyptus plants with 48 cm in height on average; 10.1 branches; 4.5 mm of stem diameter and 44.3 cm of crown diameter, at 46 days after seeding. Trinexapac-ethyl was selective to eucalyptus and stimulated crown diameter growth. At higher doses, sulfometuron-methyl promoted severe noticeable injuries in eucalyptus plants, such as apical bud death. However, during the assessment period the plants recovered and the visual symptoms of phytotoxicity and growth alterations were not observed at 60 days after application. The plant growth regulators trinexapac-ethyl and sulfometuron-methyl were selective to eucalyptus young plants.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study has aimed to develop a method for simultaneous extraction and determination by liquid chromatography and mass spectrometry (LC-MS/MS) of glyphosate, aminomethylphosphonic acid (AMPA), shikimic acid, quinic acid, phenylalanine, tyrosine and tryptophan. For the joint analysis of these compounds the best conditions of ionization in mass spectrometry and for chromatographic separation of the compounds were selected. Calibration curves and linearity ranges were also determined for each compound. Different extraction systems of the compounds were tested from plant tissues collected from sugarcane (Saccharum officinarum) and eucalyptus (Eucalyptus urophylla platiphylla) plants two days after the glyphosate application at the dose of 720 g a.e. ha-1. The plant material was dried in a forced air circulation drying oven and in a lyophilizer, and subsequently the extractions with acidified water (pH 2.5), acetonitrile-water (50:50) [v/v] and methanol-water (50:50) [v/v] were tested. To verify the recovery of the compounds in the plant matrix with acidified water as an extracting solution, the samples were fortified with a solution containing the mixture of the different analytical standards present so that this one presented the same levels of 50 and 100 μg L-1 of each compound. All experiments were conducted with three replicates. The analytical method developed was efficient for compounds quantifications. The extraction from the samples dried in an oven and using acidified water allowed better extraction levels for all compounds. The recovery levels of the compounds in the fortified samples with known amounts of each compound for both plants samples were rather satisfactory.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

ABSTRACTPanicoid grasses are major weeds of maize and sugarcane as well as of several other important grains, including sorghum, pearl millet, and foxtail millet. Pot trials were conducted to study the activity and potential interactions of topramezone in mixture with recommended rates of rimsulfuron or nicosulfuron on three annual panicoid grasses (i.e. Echinochloa oryzoides,E.phyllopogon, and Panicum miliaceum). Target weeds were treated at the four- to five-leaf growth stage. On the basis of fresh weight reduction, topramezone alone provided 78% control of E.oryzoides, 68% control of E.phyllopogon, and 99% control of P.miliaceum. Topramezone plus rimsulfuron or nicosulfuron provided decreased control of both Echinochloa spp. compared with topramezone alone. The decreased control of E.oryzoidesand E.phyllopogon was more pronounced with rimsulfuron as a companion herbicide in the mixtures. Slightly decreased control of P.milaceum was observed with topramezone plus rimsulfuron compared with topramezone alone, but this was not the case for topramezone plus nicosulfuron. Increased topramezone rates mixed with rimsulfuron or nicosulfuron did not improve control of E.oryzoides and E.phyllopogon compared with the lowest topramezone rate. Also, increased topramezone rates mixed with rimsulfuron or nicosulfuron showed decreased control of both Echinochloa spp. when compared with either rimsulfuron or nicosulfuron alone, suggesting a two-way interaction between topramezone and the ALS-inhibiting herbicides. The above-mentioned interaction was not observed in P.miliaceum, probably related with species sensitivity to the herbicides tested. Newly introduced or naturalized panicoid grasses in maize fields may complicate selection of companion herbicides and rates for effective weed control.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

ABSTRACT The objective of this study was to evaluate the availability of herbicides clomazone and tebuthiuron in the solution in different kinds of soils saturated with water or vinasse. Samples of 30 soils with different characteristics were arranged on trays to the herbicides spraying. Then they were homogenized, placed in plastic cartridges and saturated with deionized water or vinasse, and remaining at rest during 18 hours. Two extractions were made, the first one quantified the presence of the herbicides in the soil solution and in the second one the total extraction of herbicide remaining in the soil was taken to determine the recovery percentage of each herbicide tested. For quantification, a LC-MS/MS system was used, a compound of a high performance liquid chromatograph (HPLC) coupled to a triple quadruple mass spectrometer. Tebuthiuron was more available in the soil with the vinasse addition when compared to water. Vinasse applications resulted in no significant difference in availability of clomazone between treatments. Tebuthiuron showed the highest availability frequencies, and on average of all samples 32.49% were extracted from total herbicide applied, while for clomazone this value was 16.50%.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Foi avaliada a morfogênese in vitro a partir de explantes de folha imatura excisados de plantas de duas variedades nacionais (RB739735 e RB72454) de cana-de-açúcar (Saccharum officinarum L.), mantidas em campo. Os explantes foram obtidos de plantas com 6-9 meses e cultivados em meio MS sólido suplementado com 2,4-D a 9 miM. As culturas foram mantidas no escuro, durante quatro semanas. A eficiência de formação de calos foi influenciada pelo genótipo. Os calos derivados da variedade RB72454 eram mucilaginosos e não originaram plantas. Explantes da variedade RB739735 formaram calos amarelos friáveis e embriogênicos (tipo II), que mantiveram sua capacidade proliferativa por, pelo menos, seis meses. Após transferência para meio MS sem reguladores de crescimento e em condições de iluminação, 56% desses calos originaram plantas, resultando na produção de, em média, 50 plantas por calo, após dois meses de cultura. As plantas continuaram a se desenvolver, originando novos brotos após transferência para meio MS0 líquido, não sendo observadas anormalidades fenotípicas. A inibição do desenvolvimento dos calos em resposta a diferentes concentrações de antibióticos usados em protocolos de transformação genética foi também avaliada. Foi observada inibição na presença de canamicina a 128,7 miM e de higromicina a 94,8 miM. Não foi obtido nenhum efeito inibidor do antibiótico geneticina (G418), em concentrações entre 43,3 e 86,6 miM.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Lignin, after cellulose, is the second most abundant biopolymer on Earth, accounting for 30% of the organic carbon in the biosphere. It is considered an important evolutionary adaptation of plants during their transition from the aquatic environment to land, since it bestowed the early tracheophytes with physical support to stand upright and enabled long-distance transport of water and solutes by waterproofing the vascular tissue. Although essential for plant growth and development, lignin is the major plant cell wall component responsible for biomass recalcitrance to industrial processing. The fact that lignin is a non-linear aromatic polymer built with chemically diverse and poorly reactive linkages and a variety of monomer units precludes the ability of any single enzyme to properly recognize and degrade it. Consequently, the use of lignocellulosic feedstock as a renewable and sustainable resource for the production of biofuels and bio-based materials will depend on the identification and characterization of the factors that determine plant biomass recalcitrance, especially the highly complex phenolic polymer lignin. Here, we summarize the current knowledge regarding lignin metabolism in plants, its effect on biomass recalcitrance and the emergent strategies to modify biomass recalcitrance through metabolic engineering of the lignin pathway. In addition, the potential use of sugarcane as a second-generation biofuel crop and the advances in lignin-related studies in sugarcane are discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tutkimuksen tarkoituksena oli selvittää, mitkä asiat tutkimuksen toimeksiantavan yrityksen, John Deere Forestry Oy:n metsäkoneiden panssareiden ja luukkujen kanssa työskentelevä henkilöstö kokee oleellisimmiksi pohjan suojien asennettavuuden, käytettävyyden, kestävyyden ja laadun kehittämisessä. Tutkimuksella haluttiin myös selvittää, mitä hyödynnettävää tietoa yrityksen sisältä jo löytyy, mitä hiljaista tietoa henkilöstöllä on ja miten tätä kaikkea voidaan hyödyntää jatkossa suunnittelun tukena. Pääasiallisina tutkimusmenetelminä käytettiin strukturoitua kyselytutkimusta, toimeksiantavan yrityksen sekä kilpailijoiden rakenneratkaisujen tarkastelua sekä lujuuslaskentaa. Kyselytutkimuksen aineisto kerättiin loppukesästä 2014. Otanta koostui 149:stä eri toimipaikkojen työntekijästä. Aineisto käsiteltiin pääasiassa kvantitatiivisesti käyttämällä ristiintaulukointia. Kyselytutkimuksen tulosten perusteella syvennyttiin tarkastelemaan pohjan suojausta myös koneteknillisellä lähestymistavalla. Tarkastelun kohteeksi valitulle panssarille tehtiin lujuuslaskentoja kyselyn vastausten varmentamiseksi ja ongelmien tarkentamiseksi, parannusehdotuksien tueksi. Aihetta tarkasteltiin asennusergonomian, työturvallisuuden ja vaurioitumismekanismien valossa. Tulosten analysoinnin yhteydessä esitettiin ratkaisuehdotuksia yleisimpiin ongelmiin laadun kehittämiseksi. Keskeisimmät ratkaisuehdotukset liittyvät panssareiden rakenteellisen stabiiliuden parantamiseen. Käytännön toimenpide-esityksinä esimerkiksi jäykisteet, tuennat, materiaalivalinnat, uudelleenmuotoilu, apuasennustyökalut, turvavarustelut ja avautumissuunnat olisivat huomion arvoisia asioita. Tutkimuksessa kerätty tieto kootaan sovellettavaksi käytäntöön laadun kehittämiseksi tekemällä toimeksiantavalle yritykselle metsäkoneiden panssareiden ja pohjan luukkujen suunnitteluohje. Tällä pyritään jatkossa parantamaan kilpailukykyä.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tämän diplomityön tavoitteena oli saavuttaa Joensuun CNC-Machining Oy:n aloittama harvesterinlaipan kehitystyö loppuun. Kehitystyön oli aloittanut vuonna 2012 Teemu Tuominen omalla opinnäytetyöllään, joka keskittyi suunnittelua ja valmistusta rajoittavien patenttien selvittämiseen sekä laipan valmistuksessa käytettyjen materiaalien selvittämiseen. Kirjallisuuskatsauksen ja puutuvien tietojen hankinnan jälkeen tarkasteluun otettiin aiemmin valmistettu prototyyppi sekä rikkoutuneita käytetyjä laippoja. Näistä laipoista tehtiin havaintoja esille nousevista ongelmakohdista, joiden perusteella tässä työssä suunnitelmaa päivitettiin ja asetettiin vaatimukset uudelle prototyypille. Kokonaisrakenteen suunnittelun jälkeen keskityttiin viimeistelemään osatoiminnallisuuksien yksityiskohdat. Suunnittelun tulosten perusteella valmistettiin laipasta prototyyppisarja, joista kahdella suoritettiin todellista käyttöä vastaava koeajo. Koeajon aikana ja jälkeen laippojen käyttäytymisestä ja suorituskyvystä tehtiin havaintoja. Valmistuksesta ja koeajosta saaduilla tiedoilla laippamallia kehitetään kohti markkinakelpoista tuotetta ja tuoteperhettä kasvatetaan eri mallisilla laipoilla.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The pipeline for macro- and microarray analyses (PMmA) is a set of scripts with a web interface developed to analyze DNA array data generated by array image quantification software. PMmA is designed for use with single- or double-color array data and to work as a pipeline in five classes (data format, normalization, data analysis, clustering, and array maps). It can also be used as a plugin in the BioArray Software Environment, an open-source database for array analysis, or used in a local version of the web service. All scripts in PMmA were developed in the PERL programming language and statistical analysis functions were implemented in the R statistical language. Consequently, our package is a platform-independent software. Our algorithms can correctly select almost 90% of the differentially expressed genes, showing a superior performance compared to other methods of analysis. The pipeline software has been applied to 1536 expressed sequence tags macroarray public data of sugarcane exposed to cold for 3 to 48 h. PMmA identified thirty cold-responsive genes previously unidentified in this public dataset. Fourteen genes were up-regulated, two had a variable expression and the other fourteen were down-regulated in the treatments. These new findings certainly were a consequence of using a superior statistical analysis approach, since the original study did not take into account the dependence of data variability on the average signal intensity of each gene. The web interface, supplementary information, and the package source code are available, free, to non-commercial users at http://ipe.cbmeg.unicamp.br/pub/PMmA.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objectives of this study were to develop the method of isotope analysis to quantify the carbon of C3 photosynthetic cycle in pulpy whole apple juice and to measure the legal limits based on Brazilian legislation in order to identify the beverages that do not conform to the Ministry of Agriculture, Livestock and Food Supply (MAPA). This beverage was produced in a laboratory according to the Brazilian law. Pulpy juices adulterated by the addition of sugarcane were also produced. The isotope analyses measured the relative isotope enrichment of the juices, their pulpy fractions (internal standard) and purified sugar. From those results, the quantity of C3 source was estimated by means of the isotope dilution equation. To determine the existence of adulteration in commercial juices, it was necessary to create a legal limit according to the Brazilian law. Three brands of commercial juices were analyzed. One was classified as adulterated. The legal limit enabled to clearly identify the juice that was not in conformity with the Brazilian law. The methodology developed proved efficient for quantifying the carbon of C3 origin in commercial pulpy apple juices.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Xylose-to-xylitol bioconversion using 2.5 or 10% (v/v) rice bran extract was performed to verify the influence of this source of nutrients on Candida guilliermondii metabolism. Semisynthetic medium (SM) and sugarcane bagasse hemicellulosic hydrolysate detoxified with ion-exchange resins (HIE) or with alteration in pH combined with adsorption onto activated charcoal (HAC) were fermented in 125 mL Erlenmeyer flasks at 30 ºC and 200 rpm for 72 hours. Activated charcoal supplemented with 2.5% (v/v) rice bran extract was fermented by C. guilliermondii in a MULTIGEN stirred tank reactor using pH 5.0 and 22.9/hour oxygen transfer volumetric coefficient. Higher values of xylitol productivity (0.70, 0.71, and 0.62 g.Lh-1) and xylose-to-xylitol conversion yield (0.71, 0.69, and 0.63 g.g-1) were obtained with 2.5% (v/v) rice bran in semisynthetic medium, ion-exchange resins, and activated charcoal, respectively. Moreover, during batch fermentation, the xylitol volumetric productivity and fermentation efficiency values obtained were 0.53 g.Lh-1 and 61.1%, respectively.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aimed to evaluate the efficiency of natural biocides, brown and green propolis, for the control of bacterial contamination in the production of sugarcane spirit. The treatments consisted of brown and green propolis extracts, ampicillin, and a control and were assessed at the beginning and end of harvest season in ten fermentation cycles. In the microbiological analyses, the lactic acid bacteria were quantified in the inoculum before and after the treatment with biocides, and the viability of yeast cells during fermentation was evaluated. The levels of acids, glycerol, total residual reducing sugars, and ethanol were analyzed for the wine resulting from each fermentation cycle. A reduction in the number of bacterial contaminants in the inoculum in the treatments with the natural biocides was observed, but it did not affect the viability of yeast cells. The control of the contaminants led to the production of higher levels of ethanol and reduced acidity in the wine produced. The results of the use of brown and green propolis to control the growth microorganisms in the fermentation of sugarcane spirit can be of great importance for using alternative strategies to synthetic antibacterials in fermentation processes including other distilled beverage or spirits.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Abstract Sugarcane monosaccharides are reducing sugars, and classical analytical methodologies (Lane-Eynon, Benedict, complexometric-EDTA, Luff-Schoorl, Musson-Walker, Somogyi-Nelson) are based on reducing copper ions in alkaline solutions. In Brazil, certain factories use Lane-Eynon, others use the equipment referred to as “REDUTEC”, and additional factories analyze reducing sugars based on a mathematic model. The objective of this paper is to understand the relationship between variations in millivolts, mass and tenors of reducing sugars during the analysis process. Another objective is to generate an automatic model for this process. The work herein uses the equipment referred to as “REDUTEC”, a digital balance, a peristaltic pump, a digital camcorder, math programs and graphics programs. We conclude that the millivolts, mass and tenors of reducing sugars exhibit a good mathematical correlation, and the mathematical model generated was benchmarked to low-concentration reducing sugars (<0.3%). Using the model created herein, reducing sugars analyses can be automated using the new equipment.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this paper is to identify the determinants of the income of the employees of the sugarcane sector, and also for the sugar and ethanol industries. Special attention is given to union's role. Earnings equations were estimated for these sectors and information on union's action were collected in a field research. In the regressions estimated, the coefficients of the following variables were significant and had the expected signs: (i) gender (ii) region, (iii) education, (iv) threshold effect of education, (v) membership to labor unions. It was verified the existence and also the influence of labor unions on wage formation