Reproductive biology of Pseudolaelia corcovadensis Porto & Brade (Orchidaceae): melittophyly and self-compatibility in a basal Laeliinae

The floral biology, mating systems and phenology of Pseudolaelia corcovadensis (Orchidaceae), in the "Estação de Pesquisa e Desenvolvimento Ambiental de Peti", São Gonçalo do Rio Abaixo, Minas Gerais state was studied. This species flowers from April to September, with a higher availability of flowers in June and July. The flowers are dark-pink, strongly zygomorphic, and have osmophores and nectar-guides absorbing ultraviolet light. However, the flowers of P. corcovadensis do not present nectar and are pollinated by Bombus (Fervidobombus) atratus Franklin, 1913 (Hymenoptera: Apidae) by deceit. Apparently, the flowers do not form a model-mimic pair with other species in the community, but mimic a generalized melittophilous food-flower. As a consequence, visits are very rare and fruit set is low (18%). Pseudolaelia corcovadensis is self-compatible and presents inbreeding depression in the early stages of development. The phylogenetic position of the genus Pseudolaelia and studies on floral biology in related genera suggest that melittophyly and self-compatibility are basal characters in the subtribe Laeliinae, with subsequent adaptive radiation to pollination by hummingbirds, Lepidoptera, Diptera and other Hymenoptera.

The site of self-incompatibility action in cupuassu (Theobroma grandiflorum)

Cupuassu (Theobroma grandiflorum (Willd. ex Spreng.) Schumann) is a fruit tree that is attracting attention in Brazil and also in other tropical countries. Its pulp is used to prepare ice-cream, juices, jellies and many other home-made sweets. This species has a very low fecundity, attributed to problems with pollination and self-incompatibility, noted as being restrictive to the agronomic productivity of the species. Controlled pollinations between compatible and incompatible parents were made and flowers were collected at three times: 24, 48 and 72 h after pollinations, during the floral seasons of 1995 and 1998. In flowers collected 24 h after pollination, in both compatible and incompatible crosses, around 70% of ovules showed egg apparatus without evidences of sperm cell delivery; nevertheless some pollen tubes had been observed. Ovaries collected at 48 h showed different behaviors according to the type of cross. In the compatibles, 35% of ovules did not show evidences of gamete fusion. In incompatible crosses this number rose to 50%. Collected ovaries with 72 h, from compatible and incompatible crosses, showed respectively 1.2% and 14.2% of the ovules with the egg apparatus and polar nuclei only. In these ovaries, for the two types of crosses, the presence of sperm nuclei was common and the zygote was still undivided. The incompatibility action is occurring after fertilization, in a late self-incompatibility action.

Online peer to peer lending: clustering borrowers using self-organizing maps

The purpose of this thesis is to find out whether all the peer to peer lenders are unworthy of credit and also if there are single qualities or combinations of qualities that determine the probability of default of a person or group of people. Distinguishing qualities are searched with self-organizing maps (SOM). Qualities and groups of people found by the self-organizing map are then compared to the average. The comparison is carried out by looking how big proportion of borrowers meeting the criteria is two months or more behind with their payments. Research data used is collected by an Estonian peer to peer lending company during the years of 2011-2014. Data consists of peer to peer borrowers and information gathered from them.

Self-, cross- and interspecific pollinations in Passiflora capsularis and P. rubra

This study aimed to characterize the reproductive system of Passiflora capsularis L. and P. rubra L. In vivo controlled pollinations, in vitro pollen germination and pollen-ovule (P:O) ratio evaluation were conducted. In self-pollination, intraspecific and interspecific pollination, P. capsularis showed means of 62.5, 68.7 and 48.4% of fertilized flowers, while in P. rubra, the averages were 67.2, 62.5 and 46.9%, respectively. For in vitro germination, 52.2% of P. capsularis pollen grains germinated while in P. rubra, the percentage was 64.4. The P:O ratio was 22.4 for P. capsularis, and 27.4 for P. rubra, which included them in the category of obligatory autogamous. Passiflora capsularis and P. rubra can reproduce both by self-pollination and cross-pollination, and crossings between the two species succeeded though the success rate was lower than 50%. The characteristics of the reproductive system of both species allow the use of greater range of options on breeding methods for production of ornamental Passiflora plants.

Combined selection in early generation testing of self-pollinated plants

Seven selection indexes based on the phenotypic value of the individual and the mean performance of its family were assessed for their application in breeding of self-pollinated plants. There is no clear superiority from one index to another although some show one or more negative aspects, such as favoring the selection of a top performing plant from an inferior family in detriment of an excellent plant from a superior family

Frequency of B cells in normal mice which recognize self proteins

The mechanism whereby the immune system avoids self-aggression is one of the central issues of Immunology. The discovery of natural autoantibodies, mainly of IgM isotype, and of idiotypic interactions between antibodies indicates that elements of the immune system interact with self constituents and with themselves. Results of studies with soluble antibodies have indicated that the pool of circulating IgM represents the end result of a highly selective process of B cells activation and differentiation by self proteins resulting in the formation of a network. The objective of the present work was to determine the frequency of self-reacting B cells in normal mice. We were able to detect B cells that recognize self proteins present in extracts of different organs in normal adult, 2-3-month old, BALB/c and C57BL/6 mice with an ELISA spot assay. About 1% of total IgM-secreting cells among small, LPS-stimulated spleen cells reacted with organ extracts, whereas among large spleen cells the frequency was 5- to 10-fold lower. Immunization induced an increase in the frequency of IgM-secreting cells. The present results provide cellular evidence for the results of studies done at the serological level. The physiological role of these self-recognizing cells, as well as their participation in autoimmune processes, remain to be established

Liquid cooling solutions for rotating permanent magnet synchronous machines

In the design of electrical machines, efficiency improvements have become very important. However, there are at least two significant cases in which the compactness of electrical machines is critical and the tolerance of extremely high losses is valued: vehicle traction, where very high torque density is desired at least temporarily; and direct-drive wind turbine generators, whose mass should be acceptably low. As ever higher torque density and ever more compact electrical machines are developed for these purposes, thermal issues, i.e. avoidance of over-temperatures and damage in conditions of high heat losses, are becoming of utmost importance. The excessive temperatures of critical machine components, such as insulation and permanent magnets, easily cause failures of the whole electrical equipment. In electrical machines with excitation systems based on permanent magnets, special attention must be paid to the rotor temperature because of the temperature-sensitive properties of permanent magnets. The allowable temperature of NdFeB magnets is usually significantly less than 150 ˚C. The practical problem is that the part of the machine where the permanent magnets are located should stay cooler than the copper windings, which can easily tolerate temperatures of 155 ˚C or 180 ˚C. Therefore, new cooling solutions should be developed in order to cool permanent magnet electrical machines with high torque density and because of it with high concentrated losses in stators. In this doctoral dissertation, direct and indirect liquid cooling techniques for permanent magnet synchronous electrical machines (PMSM) with high torque density are presented and discussed. The aim of this research is to analyse thermal behaviours of the machines using the most applicable and accurate thermal analysis methods and to propose new, practical machine designs based on these analyses. The Computational Fluid Dynamics (CFD) thermal simulations of the heat transfer inside the machines and lumped parameter thermal network (LPTN) simulations both presented herein are used for the analyses. Detailed descriptions of the simulated thermal models are also presented. Most of the theoretical considerations and simulations have been verified via experimental measurements on a copper tooth-coil (motorette) and on various prototypes of electrical machines. The indirect liquid cooling systems of a 100 kW axial flux (AF) PMSM and a 110 kW radial flux (RF) PMSM are analysed here by means of simplified 3D CFD conjugate thermal models of the parts of both machines. In terms of results, a significant temperature drop of 40 ̊C in the stator winding and 28 ̊C in the rotor of the AF PMSM was achieved with the addition of highly thermally conductive materials into the machine: copper bars inserted in the teeth, and potting material around the end windings. In the RF PMSM, the potting material resulted in a temperature decrease of 6 ̊C in the stator winding, and in a decrease of 10 ̊C in the rotor embedded-permanentmagnets. Two types of unique direct liquid cooling systems for low power machines are analysed herein to demonstrate the effectiveness of the cooling systems in conditions of highly concentrated heat losses. LPTN analysis and CFD thermal analysis (the latter being particularly useful for unique design) were applied to simulate the temperature distribution within the machine models. Oil-immersion cooling provided good cooling capability for a 26.6 kW PMSM of a hybrid vehicle. A direct liquid cooling system for the copper winding with inner stainless steel tubes was designed for an 8 MW directdrive PM synchronous generator. The design principles of this cooling solution are described in detail in this thesis. The thermal analyses demonstrate that the stator winding and the rotor magnet temperatures are kept significantly below their critical temperatures with demineralized water flow. A comparison study of the coolant agents indicates that propylene glycol is more effective than ethylene glycol in arctic conditions.

Imbuing airborne electronic warfare self-protection : possibilities to disguise

Tutkielman nimi käännettynä suomeksi on Lentokoneiden omasuojajärjestelmien kyllästäminen – mahdollisuuksia kätkeytymiseen. Siinä keskitytään etsimään aktiivisia, ilmauhkaa kohti säteileviä keinoja ilmahyökkääjän, lentokoneen tai helikopterin, omasuojajärjestelmän harhauttamiseksi. Järjestelmät pyrkivät varoittamaan lentäjää laser- ja tutkasäteilyhavainnoista sekä ohjuksen laukaisusta ja lähestymisestä. Omasuojajärjestelmiin kuuluviin vastakeinoihin tutkimus ei keskity. Tavoitteena harhauttamisella on ilmapuolustuksen todellisen määrän ja sijainnin suojaaminen. Epätietoisuus voi saada lentäjän tekemään vääriä johtopäätöksiä. Työ ei fokusoi harhauttamisen taktiseen kehykseen työn kannalta tarpeellista määrää enempää. Tietosuojasyistä tutkimus ei käsittele käytössä olevien omasuojajärjestelmien operatiivisia ominaisuuksia vaan käsittelee teoriaa niiden taustalla. Tutkimus tehtiin käyttäen taustatutkimukselle enemmän tyypillistä kirjallisuustutkimusta. Jo tutki-muksen alkuvaiheessa oli oletettavaa, että elektronisiin sensoreihin perustuvaa omasuojajärjestelmää pystytään harhauttamaan. Systeemianalysoinnilla pyrittiin löytämään vastauksia tähän olettamukseen. Omasuojajärjestelmästä muodostettiin jo tutkimuksen varhaisessa vaiheessa malli. Tieteellistä kirjallisuutta omasuojajärjestelmistä on olemassa jonkin verran, ja niistä löydettyä tietoa omasuojajärjestelmien ominaisuuksista ja sensoreista yhdistettiin malliin niin, että siitä saatiin mahdollisimman tarkka systeemin kuvaus todellisesta omasuojajärjestelmästä. Analyysin tavoitteena oli löytää niitä kriteereitä, joilla omasuojajärjestelmä saataisiin kohtuullisen tehokkaasti uskomaan harhautusta oikeaksi hälytykseksi. Ohjuksen laukaisusta varoittava sensori perustuu ohjuksen moottorin muodostaman pilven lämpö-säteilyyn. Säteily kuitenkin muuttuu lennon eri vaiheissa, mikä tuottaa haasteita järjestelmälle. Millimetrialueen tutkan käyttö varoittimen sensorina on myös yksi vaihtoehto. Laser-varoittimet toimivat koko sillä taajuusalueella, mitä sotilaskäytössä tulenjohtamiseen ja ohjusten ohjaamiseen käytetään. Tutkavaroittimen tutkimus on vielä kesken. Löydettyjä tuloksia analysoimalla tulen tässä vaiheessa hieman ristiriitaisiin tuloksiin. Lämpösäteilyn käytön suurin haaste on sen eteneminen ilmakehässä. Varoittimen tavoitekaan ei ole toimia kymmentä kilometriä pidemmälle. Yksi mahdollinen ratkaisu on suunnitella ja toteuttaa raketti, jonka tuottaa lämpösäteilyä kuten tietty puolustavan joukon käytössä oleva ohjus. Jos koneessa on kuitenkin myös millimetrialueen tutka tukemassa varoitusjärjestelmää, hankaloituu rakettiharhautus merkittävästi, koska sen pitäisi oletettavasti olla lentokoneen kanssa melko tarkasti kohtaavalla reitillä. Laser-varoitin on ilmeisesti herkin järjestelmistä, koska se voi tietyissä olosuhteissa ja varsinkin matalalla lentokorkeudella aiheuttaa paljon vääriä hälytyksiä ilman tarkoituksellista harhauttamista. Laserin käyttö yhdistettynä raketin laukaisuun saattaisi tuottaa halutun tuloksen. Tutkavaroittimen harhautus onnistuu, jos valelaitteen signaali on uskottavan tarkka.

Digital Humanities For Everyone’s Benefit?: interplay in social media with the great audience, high-esteemed researcher and self-conscious library

The National Library of Finland realizes the Digitization Project of Kindred Languages in 2012–15. The project is financially supported by the Kone Foundation. During this project the National Library of Finland has digitized and made available approximately 1200 monograph and more than 100 newspaper titles in several Uralic languages. The materials are available to both researchers and citizens in the National Library’s Fenno-Ugrica collection. The project will produce digitized materials in the Uralic languages as well as their development tools to support linguistic research and citizen science. The resulting materials will constitute the largest resource for the Uralic languages in the world. Through this project, researchers will gain access to corpora which they have not been able to study before and to which all users will have open access regardless of their place of residence. In my presentation, I will discuss 1) how we utilized the social media (Facebook, Twitter, VKontakte etc) to gain audience for our collection and 2) how the needs of researchers and laymen were met in crowdsourcing.

Designing new learning experiences? : exploring corporate E-learners’ self-regulated learning

The context of this study is corporate e-learning, with an explicit focus on how digital learning design can facilitate self-regulated learning (SRL). The field of e-learning is growing rapidly. An increasing number of corporations use digital technology and elearning for training their work force and customers. E-learning may offer economic benefits, as well as opportunities for interaction and communication that traditional teaching cannot provide. However, the evolving variety of digital learning contexts makes new demands on learners, requiring them to develop strategies to adapt and cope with novel learning tools. This study derives from the need to learn more about learning experiences in digital contexts in order to be able to design these properly for learning. The research question targets how the design of an e-learning course influences participants’ self-regulated learning actions and intentions. SRL involves learners’ ability to exercise agency in their learning. Micro-level SRL processes were targeted by exploring behaviour, cognition, and affect/motivation in relation to the design of the digital context. Two iterations of an e-learning course were tested on two groups of participants (N=17). However, the exploration of SRL extends beyond the educational design research perspective of comparing the effects of the changes to the course designs. The study was conducted in a laboratory with each participant individually. Multiple types of data were collected. However, the results presented in this thesis are based on screen observations (including eye tracking) and video-stimulated recall interviews. These data were integrated in order to achieve a broad perspective on SRL. The most essential change evident in the second course iteration was the addition of feedback during practice and the final test. Without feedback on actions there was an observable difference between those who were instruction-directed and those who were self-directed in manipulating the context and, thus, persisted whenever faced with problems. In the second course iteration, including the feedback, this kind of difference was not found. Feedback provided the tipping point for participants to regulate their learning by identifying their knowledge gaps and to explore the learning context in a targeted manner. Furthermore, the course content was consistently seen from a pragmatic perspective, which influenced the participants’ choice of actions, showing that real life relevance is an important need of corporate learners. This also relates to assessment and the consideration of its purpose in relation to participants’ work situation. The rigidity of the multiple choice questions, focusing on the memorisation of details, influenced the participants to adapt to an approach for surface learning. It also caused frustration in cases where the participants’ epistemic beliefs were incompatible with this kind of assessment style. Triggers of positive and negative emotions could be categorized into four levels: personal factors, instructional design of content, interface design of context, and technical solution. In summary, the key design choices for creating a positive learning experience involve feedback, flexibility, functionality, fun, and freedom. The design of the context impacts regulation of behaviour, cognition, as well as affect and motivation. The learners’ awareness of these areas of regulation in relation to learning in a specific context is their ability for design-based epistemic metareflection. I describe this metareflection as knowing how to manipulate the context behaviourally for maximum learning, being metacognitively aware of one’s learning process, and being aware of how emotions can be regulated to maintain volitional control of the learning situation. Attention needs to be paid to how the design of a digital learning context supports learners’ metareflective development as digital learners. Every digital context has its own affordances and constraints, which influence the possibilities for micro-level SRL processes. Empowering learners in developing their ability for design-based epistemic metareflection is, therefore, essential for building their digital literacy in relation to these affordances and constraints. It was evident that the implementation of e-learning in the workplace is not unproblematic and needs new ways of thinking about learning and how we create learning spaces. Digital contexts bring a new culture of learning that demands attitude change in how we value knowledge, measure it, define who owns it, and who creates it. Based on the results, I argue that digital solutions for corporate learning ought to be built as an integrated system that facilitates socio-cultural connectivism within the corporation. The focus needs to shift from designing static e-learning material to managing networks of social meaning negotiation as part of a holistic corporate learning ecology.

Permanent magnet synchronous generator design solution for large directdrive wind turbines: Thermal behavior of the LC DD-PMSG

Wind is one of the most compelling forms of indirect solar energy. Available now, the conversion of wind power into electricity is and will continue to be an important element of energy self-sufficiency planning. This paper is one in a series intended to report on the development of a new type of generator for wind energy; a compact, high-power, direct-drive permanent magnet synchronous generator (DD-PMSG) that uses direct liquid cooling (LC) of the stator windings to manage Joule heating losses. The main param-eters of the subject LC DD-PMSG are 8 MW, 3.3 kV, and 11 Hz. The stator winding is cooled directly by deionized water, which flows through the continuous hollow conductor of each stator tooth-coil winding. The design of the machine is to a large degree subordinate to the use of these solid-copper tooth-coils. Both steady-state and timedependent temperature distributions for LC DD-PMSG were examined with calculations based on a lumpedparameter thermal model, which makes it possible to account for uneven heat loss distribution in the stator conductors and the conductor cooling system. Transient calculations reveal the copper winding temperature distribution for an example duty cycle during variable-speed wind turbine operation. The cooling performance of the liquid cooled tooth-coil design was predicted via finite element analysis. An instrumented cooling loop featuring a pair of LC tooth-coils embedded in a lamination stack was built and laboratory tested to verify the analytical model. Predicted and measured results were in agreement, confirming the predicted satisfactory operation of the LC DD-PMSG cooling technology approach as a whole.

Production and characterization of lipid microparticles produced by spray cooling encapsulating a low molar mass hydrophilic compound

The objective of this research was to produce and characterize lipid particles (MpLs) that may be used as carriers of high amounts of hydrophilic core and evaluate the influence of the core amount on the performance of lipid microparticles. The MpLs were produced by spray cooling from solid and liquid lipid mixtures (stearic and oleic fatty acids and partly hydrogenated vegetable fat) containing glucose solution as core and soy lecithin as surfactant. The performance of MpLs was evaluated by means of the effective amount of encapsulated core, the core amount present on the surface of MpLs (superficial glucose) and the core release profile in aqueous solution. Morphological observations showed that MpLs presented spherical shape and a rugged and continuous surface, and an average diameter between 25 and 32 µm. The effective amount of encapsulated core was greater than 78% for all formulations evaluated. Larger amounts of superficial glucose were found in formulations in which more concentrated glucose solutions were used, regardless of the glucose lipid-solution ratio. The release results showed that core retention was significantly influenced by the glucose solution concentration, whereas release modulation was influenced by the glucose lipid-solution ratio.

Experimental results and modeling of poultry carcass cooling by water immersion

Poultry carcasses have to be chilled to reduce the central breast temperatures from approximately 40 to 4 °C, which is crucial to ensure safe products. This work investigated the cooling of poultry carcasses by water immersion. Poultry carcasses were taken directly from an industrial processing plant and cooled in a pilot chiller, which was built to investigate the influence of the method and the water stirring intensity on the carcasses cooling. A simplified empiric mathematical model was used to represent the experimental results. These results indicated clearly that the understanding and quantification of heat transfer between the carcass and the cooling water is crucial to improve processes and equipment. The proposed mathematical model is a useful tool to represent the dynamics of carcasses cooling, and it can be used to compare different chiller operational conditions in industrial plants. Therefore, this study reports data and a simple mathematical tool to handle an industrial problem with little information available in the literature.