Partial melting within the lower crust – Constraints from bulk rock geochemical data and trace element mineral analyses of granulites and migmatites from Central Finland

This PhD thesis concerns geochemical constraints on recycling and partial melting of Archean continental crust. A natural example of such processes was found in the Iisalmi area of Central Finland. The rocks from this area are Middle to Late Archean in age and experienced metamorphism and partial melting between 2.7-2.63 Ga. The work is based on extensive field work. It is furthermore founded on bulk rock geochemical data as well as in-situ analyses of minerals. All geochemical data were obtained at the Institute of Geosciences, University of Mainz using X-ray fluorescence, solution ICP-MS and laser ablation-ICP-MS for bulk rock geochemical analyses. Mineral analyses were accomplished by electron microprobe and laser ablation ICP-MS. Fluid inclusions were studied by microscope on a heating-freezing-stage at the Geoscience Center, University Göttingen. Part I focuses on the development of a new analytical method for bulk rock trace element determination by laser ablation-ICP-MS using homogeneous glasses fused from rock powder on an Iridium strip heater. This method is applicable for mafic rock samples whose melts have low viscosities and homogenize quickly at temperatures of ~1200°C. Highly viscous melts of felsic samples prevent melting and homogenization at comparable temperatures. Fusion of felsic samples can be enabled by addition of MgO to the rock powder and adjustment of melting temperature and melting duration to the rock composition. Advantages of the fusion method are low detection limits compared to XRF analyses and avoidance of wet-chemical processing and use of strong acids as in solution ICP-MS as well as smaller sample volumes compared to the other methods. Part II of the thesis uses bulk rock geochemical data and results from fluid inclusion studies for discrimination of melting processes observed in different rock types. Fluid inclusion studies demonstrate a major change in fluid composition from CO2-dominated fluids in granulites to aqueous fluids in TTG gneisses and amphibolites. Partial melts were generated in the dry, CO2-rich environment by dehydration melting reactions of amphibole which in addition to tonalitic melts produced the anhydrous mineral assemblages of granulites (grt + cpx + pl ± amph or opx + cpx + pl + amph). Trace element modeling showed that mafic granulites are residues of 10-30 % melt extraction from amphibolitic precursor rocks. The maximum degree of melting in intermediate granulites was ~10 % as inferred from modal abundances of amphibole, clinopyroxene and orthopyroxene. Carbonic inclusions are absent in upper-amphibolite facies migmatites whereas aqueous inclusion with up to 20 wt% NaCl are abundant. This suggests that melting within TTG gneisses and amphibolites took place in the presence of an aqueous fluid phase that enabled melting at the wet solidus at temperatures of 700-750°C. The strong disruption of pre-metamorphic structures in some outcrops suggests that the maximum amount of melt in TTG gneisses was ~25 vol%. The presence of leucosomes in all rock types is taken as the principle evidence for melt formation. However, mineralogical appearance as well as major and trace element composition of many leucosomes imply that leucosomes seldom represent frozen in-situ melts. They are better considered as remnants of the melt channel network, e.g. ways on which melts escaped from the system. Part III of the thesis describes how analyses of minerals from a specific rock type (granulite) can be used to determine partition coefficients between different minerals and between minerals and melt suitable for lower crustal conditions. The trace element analyses by laser ablation-ICP-MS show coherent distribution among the principal mineral phases independent of rock composition. REE contents in amphibole are about 3 times higher than REE contents in clinopyroxene from the same sample. This consistency has to be taken into consideration in models of lower crustal melting where amphibole is replaced by clinopyroxene in the course of melting. A lack of equilibrium is observed between matrix clinopyroxene / amphibole and garnet porphyroblasts which suggests a late stage growth of garnet and slow diffusion and equilibration of the REE during metamorphism. The data provide a first set of distribution coefficients of the transition metals (Sc, V, Cr, Ni) in the lower crust. In addition, analyses of ilmenite and apatite demonstrate the strong influence of accessory phases on trace element distribution. Apatite contains high amounts of REE and Sr while ilmenite incorporates about 20-30 times higher amounts of Nb and Ta than amphibole. Furthermore, trace element mineral analyses provide evidence for magmatic processes such as melt depletion, melt segregation, accumulation and fractionation as well as metasomatism having operated in this high-grade anatectic area.

Evoluzione della composizione chimica dei sedimenti della pianura Romagnola: evoluzione dei tenori di fondo

L’obiettivo del seguente lavoro di tesi è stato quello di studiare ed individuare la litologia e stratigrafia dei sondaggi oggetto del mio studio, al fine di realizzare un modello stratigrafico,attraverso l’impiego del Software Rockworks, che mettesse in risalto le diverse facies che caratterizzano il territorio della pianura romagnola. Il territorio da me esaminato interessa il territorio della provincia di Ravenna e Ferrara. In seguito ho analizzato la distribuzione di alcuni elementi chimici maggiori, per la determinazione della provenienza degli stessi

Sedimentary rocks of the Internal Hellenides, Greece: age, source, and depositional setting

Ziel der vorliegenden Dissertation war die Untersuchung der Liefergebiete und Ablagerungsräume sedimentärer Gesteine aus ausgewählten Gebieten der inneren Helleniden Griechenlands. Die untersuchten Sedimente Nordgriechenlands gehören zu den Pirgadikia und Vertiskos Einheiten des Serbo-Makedonische Massifs, zu den Examili, Melissochori und Prinochori Formationen der östlichen Vardar Zone und zur Makri Einheit und Melia Formation des östlichen Zirkum-Rhodope-Gürtels in Thrakien. In der östlichen Ägäis lag der Schwerpunkt bei den Sedimenten der Insel Chios. Der Metamorphosegrad der untersuchten Gesteine variiert von der untersten Grünschieferfazies bis hin zur Amphibolitfazies. Das stratigraphische Alter reicht vom Ordovizium bis zur Kreide. Zur Charakterisierung der Gesteine und ihrer Liefgebiete wurden Haupt- und Spurenelementgehalte der Gesamtgesteine bestimmt, mineralchemische Analysen durchgeführt und detritische Zirkone mit U–Pb datiert. An ausgewählten Proben wurden außerdem biostratigraphische Untersuchungen zur Bestimmung des Sedimentationsalters durchgeführt. Die Untersuchungsergebnisse dieser Arbeit sind von großer Bedeutung für paläogeographische Rekonstruktionen der Tethys. Die wichtigsten Ergebnisse lassen sich wie folgt zusammenfassen: Die ältesten Sedimente Nordgriechenlands gehören zur Pirgadikia Einheit des Serbo-Makedonischen Massifs. Es sind sehr reife, quarzreiche, siliziklastische Metasedimente, die auf Grund ihrer Maturität und ihrer detritischen Zirkone mit ordovizischen overlap-Sequenzen vom Nordrand Gondwanas korreliert werden können. Die Metasedimente der Vertiskos Einheit besitzen ein ähnliches stratigraphisches Alter, haben aber einen anderen Ablagerungsraum. Das Altersspektrum detritischer Zirkone lässt auf ein Liefergebiet im Raum NW Afrikas (Hun Superterrane) schließen. Die Gesteinsassoziation der Vertiskos Einheit wird als Teil einer aktiven Kontinentalrandabfolge gesehen. Die ältesten biostratigraphisch datierten Sedimente Griechenlands sind silurische bis karbonische Olistolithe aus einer spätpaläozoischen Turbidit-Olistostrom Einheit auf der Insel Chios. Die Alter detritischer Zirkone und die Liefergebietsanalyse der fossilführenden Olistolithe lassen den Schluss zu, dass die klastischen Sedimente von Chios Material vom Sakarya Mikrokontinent in der West-Türkei und faziellen Äquivalenten zu paläozoischen Gesteinen der Istanbul Zone in der Nord-Türkei und der Balkan Region erhalten haben. Während der Permotrias wurde die Examili Formation der östlichen Vardar Zone in einem intrakontinentalen, sedimentären Becken, nahe der Vertiskos Einheit abgelagert. Untergeordnet wurde auch karbonisches Grundgebirgsmaterial eingetragen. Im frühen bis mittleren Jura wurde die Melissochori Formation der östlichen Vardar Zone am Abhang eines karbonatführenden Kontinentalrandes abgelagert. Der Großteil des detritischen Materials kam von permokarbonischem Grundgebirge vulkanischen Ursprungs, vermutlich von der Pelagonischen Zone und/oder der unteren tektonischen Einheit des Rhodope Massifs. Die Makri Einheit in Thrakien besitzt vermutlich ein ähnliches Alter wie die Melissochori Formation. Beide sedimentären Abfolgen ähneln sich sehr. Der Großteil des detritischen Materials für die Makri Einheit kam vom Grundgebirge der Pelagonischen Zone oder äquivalenten Gesteinen. Während der frühen Kreide wurde die Prinochori Formation der östlichen Vardar Zone im Vorfeld eines heterogenen Deckenstapels abgelagert, der ophiolitisches Material sowie Grundgebirge ähnlich zu dem der Vertiskos Einheit enthielt. Ebenfalls während der Kreidezeit wurde in Thrakien, vermutlich im Vorfeld eines metamorphen Deckenstapels mit Affinitäten zum Grundgebirge der Rhodopen die Melia Formation abgelagert. Zusammenfassend kann festgehalten werden, dass die Subduktion eines Teiles der Paläotethys und die anschließende Akkretion vom Nordrand Gondwanas stammender Mikrokontinente (Terranes) nahe dem südlichen aktiven Kontinentalrand Eurasiens den geodynamischen Rahmen für die Schüttung des detritischen Materials der Sedimente der inneren Helleniden im späten Paläozoikum bildeten. Die darauf folgenden frühmesozoischen Riftprozesse leiteten die Bildung von Ozeanbecken der Neotethys ein. Intraozeanische Subduktion und die Obduzierung von Ophioliten prägten die Zeit des Jura. Die spätjurassische und frühkretazische tektonische Phase wurde durch die Ablagerung von mittelkretazischen Kalksteinen besiegelt. Die endgültige Schließung von Ozeanbecken der Neotethys im Bereich der inneren Helleniden erfolgte schließlich in der späten Kreide und im Tertiär.

Analisi del popolamento e delle dinamiche culturali del Neolitico nella Puglia Centrale : un approccio territoriale per la Bassa Murgia

L’obiettivo della ricerca condotta dal candidato è stato sin dal principio la proposta di un’analisi del popolamento e delle dinamiche culturali dell’età neolitica nella Puglia Centrale. Tale aspirazione derivava dal fatto che il territorio oggetto di tale ricerca è stato, negli ultimi decenni, assai meno investigato rispetto alle limitrofe aree, come la piana del Tavoliere ed il Salento in particolare. Questa mancanza di informazioni rendeva necessaria una rivisitazione delle ricerche e degli studi, attraverso la costruzione di un atlante del popolamento, al fine di colmare questo vuoto. Infatti, una valutazione del popolamento dell’età neolitica nell’Italia sud-orientale non può essere considerata per aree culturali distinte e geograficamente limitate. Nonostante vi siano importanti differenziazioni di facies archeologiche, è solo attraverso una visione complessiva e con un controllo articolato delle informazioni che è possibile descrivere i processi e le dinamiche che hanno portato ad un popolamento così imponente, dalla sua espansione al repentino collasso, causando la trasformazione del paesaggio pugliese. La scelta di guardare alla complessità neolitica di questo versante della Puglia si lega culturalmente, oltre che geograficamente, alla ricerca già effettuata sulla grande diffusione del neolitico nella piana del Tavoliere di Puglia, unico esempio europeo in quanto a colonizzazione capillare del territorio..Ciò ha permesso di disegnare un quadro globale, che al momento esclude solo la penisola salentina, del popolamento neolitico della Puglia settentrionale e centrale. Le caratteristiche che differenziano i due complessi, sono strettamente legate sia all’habitat insediativo, inteso come scelte insediamentali, che nella regione indagata appare organizzato su diversi livelli (area costiera adriatica, area prospiciente antichi alvei torrentizi, propaggini dell’altopiano delle Murge), che alle forme culturali, intese come produzione artigianale e soprattutto aspetti rituali connessi alla frequentazione delle grotte naturali.

Reciproche influenze tra geomorfologia e popolamento antico presso le piane di foce dei fiumi tirrenici. Il caso del Fiume Garigliano

La Piana di foce del Garigliano (al confine tra Lazio e Campania) è caratterizzata, fino ad epoche recenti, dalla presenza di aree palustri e umide. Lo studio in corso cerca di ricostruire l’evoluzione dell’ambiente costiero mettendolo in relazione alla presenza dell’uomo, alla gestione del territorio, alle vicende storiche e alle variazioni climatiche utilizzando molteplici metodologie tipiche della geoarcheologia. Si tratta di un approccio multidisciplinare che cerca di mettere insieme analisi tipiche dell’archeologia, della topografia antica, della geomorfologia, della geologia e della paleobotanica. Fino all’età del Ferro l’unica traccia di popolamento viene da Monte d’Argento, uno sperone roccioso isolato lungo la costa, posto al limite occidentale di un ambiente sottostante che sembra una palude chiusa e isolata da apporti sedimentari esterni. Con il passaggio all’età del ferro si verifica un mutamento ambientale con la fine della grande palude e la formazione di una piccola laguna parzialmente comunicante con il mare. L’arrivo dei romani alla fine del III secolo a.C. segna la scomparsa dei grandi centri degli Aurunci e la deduzione di tre colonie (Sessa Aurunca, Sinuessa, Minturno). Le attività di sistemazione territoriale non riguardarono però le aree umide costiere, che non vennero bonificate o utilizzate per scopi agricoli, ma mantennero la loro natura di piccoli laghi costieri. Quest’epoca è dunque caratterizzata da una diffusione capillare di insediamenti, basati su piccole fattorie o installazioni legate allo sfruttamento agricolo. Poche sono le aree archeologiche che hanno restituito materiali successivi al II-III secolo d.C. La città resta comunque abitata fino al VI-VII secolo, quando l’instabilità politica e l’impaludamento dovettero rendere la zona non troppo sicura favorendo uno spostamento verso le zone collinari. Un insediamento medievale è attestato solo a Monte d’Argento e una frequentazione saracena dell’inizio del IX secolo è riportata dalle fonti letterarie, ma non vi è ancora nessuna documentazione archeologica.

Paleontological studies of Cretaceous vertebrate fossil beds in the Tataouine Basin (southern Tunisia)

The ‘Continental Intercalaire’ deposits of the Tataouine basin of southern Tunisia preserve one of the most diverse Cretaceous vertebrate fauna from Africa. This research project focuses on a detailed revision of the stratigraphic distribution of mid-Cretaceous fossil beds in the Tataouine Basin and includes the description of four, newly discovered vertebrate tracksites. In the Tataouine region, macro- and microvertebrate remains are recovered from three stratigraphic intervals: the lower Douiret Formation (Barremian), the Chenini (rare) and Oum ed Diab members of the Aïn El Guettar Formation (Albian). A detailed, basin-scale revision of the stratigraphic occurrence of fossil-bearing strata indicates 1. lateral facies variability within the context of a low gradient, circalittoral to coastal-plain environment; 2. multiple and diachronous fossil beds which include elasmobranchs, actinopterygians, sarcopterygians, turtles, crocodyliforms, pterosaurs, and non-avian dinosaurs remains. Four vertebrate tracksites have been discovered in the study area: 1. the Middle Jurassic Beni Ghedir site which preserves approximately 130 tridactyl footprints distributed over an area of 200 square meters, representing the oldest evidence of a dinosaur fauna in Tunisia; 2. the late Albian Chenini tracksite, which includes poorly preserved crocodilian tracks and the dinosaur ichnospecies Apulosauripus federicianus; 3. the Cenomanian Ksar Ayaat locality, where footprints assigned to a pleurodiran turtle are exposed, and 4. the upper Cenomanian Jebel Boulouha site which presents almost 100 well-preserved tridactyl tracks referred to small-sized theropods, fossil bird tracks - ichnogenus Koreanaorins – and tracks referred to a mammalian trackmaker, representing the first report of fossil bird and mammal from the Cretaceous of continental Africa and Tunisia respectively. In addition, data collected from the Tunisian tracksites have been compared with coeval tracksites in Italy and Croatia, showing analogies in morphology and paleoenvironment of dinosaur ichnoassociations, supporting the already hypothesized subaerial connection between these areas during the mid-Cretaceous.

Carbonate conical mounds of the eastern Anti-Atlas(Morocco) and their relationship with potential analogues on Mars

Longstanding debates concerning the origin of the Kess Kess Emsian carbonate mounds exposed at Hamar Laghdad Ridge (eastern Anti-Atlas, Morocco) centre around the processes that induced precipitation of carbonate mud and the preservation of steep morphologies. Although in the last years an origin related to hydrothermalism seemed to be more likely, to date the Kess Kess are still considered controversial vent deposits. This study combines in updated research review information from previous work and new detailed field observations coupled with new analytical results to define a consistent framework and some new insight of current knowledge about the origin of these mounds. We obtain a complete minero-petrographic and palaeobiological data set and a detailed geochemical characterization of the different lithologies and facies of the Hamar Laghdad stratigraphic succession, including mounds, and we compared the results with the data from Maïder Basin mounds (Anti-Atlas, Morocco). Our data support the hydrothermal model proposed for the genesis and development of the Kess Kess mounds. The mechanisms linked to the mounds formation and growth are discussed in the light of the new finding of fluid-sediment interaction within a scenario driven by late magmatic fluids circulation. Conical mounds and other fluids related morphologies were also reported from Crommelin crater area (Arabia Terra, Mars). These mounds consist in meter-sized conical buildups hosted in the Equatorial Layered Deposits (ELDs) deposed during a regional groundwater fluid upwelling. Geometries and geological conditions that might have controlled the development of such morphologies were discussed. According to our data the morphological and stratigraphical characteristics of Crommelin area mounds are most consistent with a formation by fluids advection. Then we compare terrestrial and Martian data and examine the geological settings of hydrothermal mound occurrences on Earth in order to describe potential target areas for hydrothermal structures on Mars.

Paleosol-based stratigraphy of late Quaternary deposits from the Po basin, between Bologna and the Po river (Northern Italy)

Stratigraphic studies carried out over the last decades in Italy and elsewhere testify a growing interest in Quaternary deposits and in the influence of climate change on their architecture. The subsurface of the Po Plain, in its topmost portion, is made up of alluvial deposits organized in depositional cycles at different scales. This PhD thesis provides millennial-scale stratigraphic reconstruction of the Late Pleistocene-Holocene deposits beneath the southern Po Plain, based on basin-scale correlation of laterally-extensive buried soil horizons. Far from the aim of characterizing palaeosols from a mineralogical and geochemical point of view, we focused on the physical and stratigraphic significance of these horizons. In the Bologna urban area, which hosts an abundance of stratigraphic data, the correlation between seventeen continuously-cored boreholes led to the identification of five vertically-stacked palaeosol-bounded sequences within the 14C time window. In a wide portion of the alluvial plain north of Bologna, far away from the Apenninic margin and from the Po River, where subsurface stratigraphic architecture is dominated by markedly lenticular sediment bodies, palaeosols revealed to be the only stratigraphic marker of remarkable lateral continuity. These horizons are characterized by peculiar resistance values, which make them easily identifiable via pocket penetration tests. Palaeosols reveal specific geometric relationships with the associated alluvial facies associations, allowing reliable estimates of soil development as a function of alluvial dynamics. With the aid of sixty new radiocarbon dates, a reliable age attribution and likely time intervals of exposure were assigned to each palaeosol. Vertically-stacked palaeosols delimitate short-term depositional cycles, likely related to the major episodes of climatic change of the last 40 ky. Through integration of stratigraphic data with 750 archaeological reports from the Bologna area, the impact of human settlements on depositional and pedogenic processes during the late Holocene was investigated.

ALMASat-1, ALMASat-EO and beyond: evolution of structural concepts and technologies towards multifunctional structures for microsatellites

Multifunctional Structures (MFS) represent one of the most promising disruptive technologies in the space industry. The possibility to merge spacecraft primary and secondary structures as well as attitude control, power management and onboard computing functions is expected to allow for mass, volume and integration effort savings. Additionally, this will bring the modular construction of spacecraft to a whole new level, by making the development and integration of spacecraft modules, or building blocks, leaner, reducing lead times from commissioning to launch from the current 3-6 years down to the order of 10 months, as foreseen by the latest Operationally Responsive Space (ORS) initiatives. Several basic functionalities have been integrated and tested in specimens of various natures over the last two decades. However, a more integrated, system-level approach was yet to be developed. The activity reported in this thesis was focused on the system-level approach to multifunctional structures for spacecraft, namely in the context of nano- and micro-satellites. This thesis documents the work undertaken in the context of the MFS program promoted by the European Space Agency under the Technology Readiness Program (TRP): a feasibility study, including specimens manufacturing and testing. The work sequence covered a state of the art review, with particular attention to traditional modular architectures implemented in ALMASat-1 and ALMASat-EO satellites, and requirements definition, followed by the development of a modular multi-purpose nano-spacecraft concept, and finally by the design, integration and testing of integrated MFS specimens. The approach for the integration of several critical functionalities into nano-spacecraft modules was validated and the overall performance of the system was verified through relevant functional and environmental testing at University of Bologna and University of Southampton laboratories.

Forward modelling of petrological crust-forming processes on the early Earth

Tonalite-trondhjemite-granodiorite (TTG) gneisses form up to two-thirds of the preserved Archean continental crust and there is considerable debate regarding the primary magmatic processes of the generation of these rocks. The popular theories indicate that these rocks were formed by partial melting of basaltic oceanic crust which was previously metamorphosed to garnet-amphibolite and/or eclogite facies conditions either at the base of thick oceanic crust or by subduction processes.rnThis study investigates a new aspect regarding the source rock for Archean continental crust which is inferred to have had a bulk compostion richer in magnesium (picrite) than present-day basaltic oceanic crust. This difference is supposed to originate from a higher geothermal gradient in the early Archean which may have induced higher degrees of partial melting in the mantle, which resulted in a thicker and more magnesian oceanic crust. rnThe methods used to investigate the role of a more MgO-rich source rock in the formation of TTG-like melts in the context of this new approach are mineral equilibria calculations with the software THERMOCALC and high-pressure experiments conducted from 10–20 kbar and 900–1100 °C, both combined in a forward modelling approach. Initially, P–T pseudosections for natural rock compositions with increasing MgO contents were calculated in the system NCFMASHTO (Na2O–CaO–FeO–MgO–Al2O3–SiO2–H2O–TiO2) to ascertain the metamorphic products from rocks with increasing MgO contents from a MORB up to a komatiite. A small number of previous experiments on komatiites showed the development of pyroxenite instead of eclogite and garnet-amphibolite during metamorphism and established that melts of these pyroxenites are of basaltic composition, thus again building oceanic crust instead of continental crust.rnThe P–T pseudosections calculated represent a continuous development of their metamorphic products from amphibolites and eclogites towards pyroxenites. On the basis of these calculations and the changes within the range of compositions, three picritic Models of Archean Oceanic Crust (MAOC) were established with different MgO contents (11, 13 and 15 wt%) ranging between basalt and komatiite. The thermodynamic modelling for MAOC 11, 13 and 15 at supersolidus conditions is imprecise since no appropriate melt model for metabasic rocks is currently available and the melt model for metapelitic rocks resulted in unsatisfactory calculations. The partially molten region is therfore covered by high-pressure experiments. The results of the experiments show a transition from predominantly tonalitic melts in MAOC 11 to basaltic melts in MAOC 15 and a solidus moving towards higher temperatures with increasing magnesium in the bulk composition. Tonalitic melts were generated in MAOC 11 and 13 at pressures up to 12.5 kbar in the presence of garnet, clinopyroxene, plagioclase plus/minus quartz (plus/minus orthopyroxene in the presence of quartz and at lower pressures) in the absence of amphibole but it could not be explicitly indicated whether the tonalitic melts coexisting with an eclogitic residue and rutile at 20 kbar do belong to the Archean TTG suite. Basaltic melts were generated predominantly in the presence of granulite facies residues such as amphibole plus/minus garnet, plagioclase, orthopyroxene that lack quartz in all MAOC compositions at pressures up to 15 kbar. rnThe tonalitic melts generated in MAOC 11 and 13 indicate that thicker oceanic crust with more magnesium than that of a modern basalt is also a viable source for the generation of TTG-like melts and therefore continental crust in the Archean. The experimental results are related to different geologic settings as a function of pressure. The favoured setting for the generation of early TTG-like melts at 15 kbar is the base of an oceanic crust thicker than existing today or by melting of slabs in shallow subduction zones, both without interaction of tonalic melts with the mantle. Tonalitic melts at 20 kbar may have been generated below the plagioclase stability by slab melting in deeper subduction zones that have developed with time during the progressive cooling of the Earth, but it is unlikely that those melts reached lower pressure levels without further mantle interaction.rn

Stratigrafia dei depositi tardoquaternari dell'alta pianura forlivese tra il fiume Montone e il fiume Ronco

Lo studio stratigrafico di diverse prove geognostiche nel sottosuolo dell’alta pianura forlivese ha permesso di ricostruire uno scenario stratigrafico di dettaglio dei depositi tardoquaternari del Bacino Padano. Attraverso la realizzazione di una sezione stratigrafica, parallela al margine del bacino, nei territori compresi tra il comune di Forlì e Forlimpopoli, ottenuta utilizzando stratigrafie di pozzi per acqua, di sondaggi a carotaggio continuo e di prove penetrometriche corredati da datazioni radiometriche, ha evidenziato un’architettura stratigrafica tipica di una pianura alluvionale. L’analisi di facies e le correlazioni stratigrafiche mostrano un’evidente suddivisione dei depositi alluvionali in quattro intervalli stratigrafici a controllo glacio-eustatico. Alla base sono presenti depositi che possono essere attribuibili ad un sistema di regressione forzata (FST), durante i quali si verificherebbe l’incisione dei sistemi alluvionali. I corpi amalgamati di canale fluviale, invece, sarebbero riconducibili alla successiva fase di stazionamento basso del livello del mare (LST), avvenuto durante l’ultimo acme glaciale. Al di sopra di questi depositi, la presenza di corpi lenticolari, isolati, di canale fluviale, entro depositi fini di piana inondabile, è compatibile con una fase di sollevamento del livello del mare (depositi trasgressivi o TST) ed infine i depositi sommitali, prevalentemente fini, potrebbero rappresentare la fase di stazionamento alto del livello del mare (HST). La definizione della geometria dei corpi sepolti in Pianura Padana costituisce uno strumento di rilevante importanza nella ricerca e nella protezione della risorsa idrica: in particolare, l’applicazione dei principi di stratigrafia sequenziale risulta fondamentale nell’interpretazione della distribuzione spaziale dei corpi acquiferi.

A study of air-sea interaction processes on water mass formation and upwelling in the Mediterranean sea

Air-sea interactions are a key process in the forcing of the ocean circulation and the climate. Water Mass Formation is a phenomenon related to extreme air-sea exchanges and heavy heat losses by the water column, being capable to transfer water properties from the surface to great depth and constituting a fundamental component of the thermohaline circulation of the ocean. Wind-driven Coastal Upwelling, on the other hand, is capable to induce intense heat gain in the water column, making this phenomenon important for climate change; further, it can have a noticeable influence on many biological pelagic ecosystems mechanisms. To study some of the fundamental characteristics of Water Mass Formation and Coastal Upwelling phenomena in the Mediterranean Sea, physical reanalysis obtained from the Mediterranean Forecating System model have been used for the period ranging from 1987 to 2012. The first chapter of this dissertation gives the basic description of the Mediterranean Sea circulation, the MFS model implementation, and the air-sea interaction physics. In the second chapter, the problem of Water Mass Formation in the Mediterranean Sea is approached, also performing ad-hoc numerical simulations to study heat balance components. The third chapter considers the study of Mediterranean Coastal Upwelling in some particular areas (Sicily, Gulf of Lion, Aegean Sea) of the Mediterranean Basin, together with the introduction of a new Upwelling Index to characterize and predict upwelling features using only surface estimates of air-sea fluxes. Our conclusions are that latent heat flux is the driving air-sea heat balance component in the Water Mass Formation phenomenon, while sensible heat exchanges are fundamental in Coastal Upwelling process. It is shown that our upwelling index is capable to reproduce the vertical velocity patterns in Coastal Upwelling areas. Nondimensional Marshall numbers evaluations for the open-ocean convection process in the Gulf of Lion show that it is a fully turbulent, three-dimensional phenomenon.

Rilevamento di dettaglio della zona del Passo Val Clapa (Austroalpino superiore, Alta Val di Non)

Questo elaborato ha come obiettivo il rilevamento geologico di dettaglio di alcuni affioramenti del basamento polimetamorfico della Falda del Tonale, nella zona del Passo Val Clapa (Alta Val di Non, TN), e di verificare l’attribuzione delle litologie all’Unità d’Ultimo, di alto grado metamorfico, o a quella del Tonale, di più basso grado. In due affioramenti nelle immediate vicinanze del Passo Val Clapa sono stati rinvenuti principalmente gneiss e gneiss migmatitici a granato e cianite, anfiboliti e miloniti, mentre in un affioramento a E del passo gneiss migmatitici a granato e cianite, migmatiti (stromatiti e nebuliti) e ultramafiti. Le foliazioni, definite dall’orientazione preferenziale dei minerali, indicano due direzioni principali: un’orientazione NNE-SSW, immergente verso ESE, rilevata nelle rocce milonitiche, che è stata correlata alla presenza della linea della Val Clapa; un’orientazione NW-SE, immergente verso NE, insieme ad una blanda piega con asse orientato NNE-SSW, rilevata nelle ultramafiti e nelle loro rocce incassanti. Sono state inoltre misurate le giaciture dei principali set di fratture che interessano gli ammassi ed è stata documentata la presenza di pseudotachiliti all’interno delle miloniti. Il corpo ultramafico è stato cartografato al contatto fra stromatiti e nebuliti e quindi all’interno dell’Unità d’Ultimo. Le miloniti, invece, rimangono di attribuzione incerta, anche se il loro ritrovamento in associazione con anfiboliti retrocesse in facies scisti verdi e di pegmatiti faccia propendere per un’assegnazione all’Unità del Tonale. Un’analisi di dettaglio degli gneiss affioranti nelle vicinanze delle miloniti permetterebbe di classificarli come paragneiss a sillimanite, caratteristici dell’Unità del Tonale, o come paragneiss a granato e cianite, diagnostici dell’Unità d’Ultimo, contribuendo alla corretta attribuzione geologica di questi terreni.

Analisi petrografica delle ultramafiti del Passo Val Clapa (Austroalpino superiore, Alta Val di Non)

Questo elaborato ha come obiettivo l'analisi petrografica di rocce ultramafiche facenti parte del basamento metamorfico cristallino affiorante in Alta Val di Non (Provincia autonoma di Trento). Tali rocce appartengono all'Unità di Ultimo (Falda del Tonale, Austroalpino superiore), caratterizzata da corpi ultramafici che affiorano al contatto tra i sottostanti paragneiss a granato e cianite e le soprastanti migmatiti. Il metamorfismo e l'anatessi registrati dalle rocce dell'Unità di Ultimo hanno età Ercinica (Carbonifero Sup.). Lo studio si è concentrato su un corpo ultramafico situato in Alta Val di Bresimo, in località Passo Val Clapa, costituito da una lente di harzburgite a granato attraversato da livelli di olivin-websterite a granato e anfibolo. L'harzburgite è costituita al 65% da olivina, al 20% da serpentino (cresciuto a spese dell'olivina) e al 15% da ortopirosseno; sono presenti spinelli e clinopirosseni accessori. Nel campione analizzato, il granato è sostituito da aggregati policristallini costituiti da kelifite e da anfibolo secondario. La websterite è costituita al 40% da pirosseni (orto e clinopirosseni in uguale quantità), al 25% da anfibolo primario, al 25% da granato, al 5% da olivina e al 5% da minerali opachi. Sono presenti strutture coronitiche attorno ai granati (costituite da kelifite e anfibolo); si nota clorite cresciuta a spese di anfibolo e pirosseni e hyddingsite cresciuta a spese dell'olivina. L'olivin-websterite mostra gli stessi minerali indice riscontrati nell'harzburgite ospitante, segno che entrambi i corpi hanno seguito la medesima evoluzione P-T. In una prima fase la pirossenite si trovava, come la peridotite, in facies a spinello: ciò è confermato dalla presenza di spinelli relitti al nucleo dei granati. Questi ultimi si sono formati a spese dello spinello durante l'aumento di P, una volta superata la soglia di transizione tra le due facies. Le corone kelifitiche, presenti sia nella harzburgite che nella olivin-websterite, rappresentano un'evidenza di metamorfismo retrogrado.

Stratigrafia di Depositi Tardoquaternari dell'Alta Pianura Veneta

Basandoci sugli studi di stratigrafia sequenziale, nel Bacino Padano possiamo identificare tre principali unità sedimentarie: unità basale con FST e LST, unità intermedia con TST e unità superficiale con HST. Lo scopo principale di questo elaborato prevede la ricostruzione di dettaglio delle caratteristiche stratigrafiche del primo sottosuolo, situato nell'alta pianura veneta, in termini di facies, con relativa interpretazione dell'evoluzione paleoambientale. Più nel dettaglio, attraverso la realizzazione e interpretazione di due sezioni stratigrafiche, si analizzerà la distribuzione spaziale e la geometria di corpi sedimentari di natura fluviale nel substrato cercando di ipotizzarne le modalità di formazione.