Dielectric and viscoelastic properties of cross-linked polyethylene aged under multi stressing conditions

Different measurements were performed in cross-linked polyethylene (XLPE) employed as insulating material in coaxial cables that were field-aged and laboratory-aged under multi-stressing conditions at room temperature. Samples were peeled from the XLPE cable insulation in three different positions: just below the external semiconductor layer (outer layer), in the middle (middle layer) and just above the internal semiconductor layer of the cable (inner layer). The imaginary part of the electric susceptibility showed three peaks that obey the Dissado-Hill model. For laboratory-aged XLPE samples peeled from the inner and from the middle positions the peak at very low frequency region increased while in samples from the outer position a quasi-DC conduction process was observed. In medium frequency range a broadening of the peak was observed for all samples. Viscoelastic properties determined through dynamic mechanical analysis suggested that the aging generates processes that promoted changes of the crystallinity and the cross-linking degrees of the polymer. Fourier transform infrared spectroscopy (FTIR) measurements revealed an increase of oxidation products (esters), evidence of polar residues of the bow-tie tree and the presence of cross-linking by-products (acetophenone). Optical and scanning electronic microscope (SEM) measurements in aged samples revealed the existence of voids and bow-tie trees that were formed during aging in the middle region of the cable.

A scanning electronic microscopy study of the action of different desensitizing agents on bovine dentin

This study sought to use scanning electronic microscopy (SEM) to evaluate the dentinal tubule occlusion potential of different desensitizing agents. Ten slices of bovine dentin were divided into six fragments, cleaned (using ultrasound), and etched for 15 seconds with a 35% phosphoric acid solution. All but one of the groups received a different desensitizing agent; the sixth group served as a control and received no additional treatment. After the agents were applied, the dentin specimens were analyzed by SEM and scores were assigned based on the extent of tubular obliteration. Only three agents demonstrated tubular sealing that was significantly different from that of the control group.

Turning of compacted graphite iron using commercial tiN coated Si 3N4 under dry machining conditions

Due to their high hardness and wear resistance Si3N4 based ceramics are one of the most suitable cutting tool materials for machining hardened materials. Therefore, their high degree of brittleness usually leads to inconsistent results and sudden catastrophic failures. Improvement of the functional properties these tools and reduction of the ecological threats may be accomplished by employing the technology of putting down hard coatings on tools in the state-of-the-art PVD processes, mostly by improvement of the tribological contact conditions in the cutting zone and by eliminating the cutting fluids. However in this paper was used a Si3N4 based cutting tool commercial with a layer TiN coating. In this investigation, the performance of TiN coating was assessed on turning used to machine an automotive grade compacted graphite iron. As part of the study were used to characterise the performance of cutting tool, flank wear, temperature and roughness. The results showed that the layer TiN coating failed to dry compacted graphite iron under aggressive machining conditions. However, using the measurement of flank wear technique, the average tool life of was increased by VC=160 m/min.The latter was also observed using a toolmakers microscope and scanning electron microscopy (SEM).

High-pressure assisted sintering of Ti-20Si-10B and Ti-10Si-5B powders

This work presents the structural characterization of Ti-10Si-5B and Ti-20Si-10B (at-%) alloys produced by high-pressure assisted sintering. Sintering was performed in air at 1100 and 1200°C for 60 s using pressure levels of 5 GPa. Structural evaluation of sintered samples was conducted by means of scanning electron microscopy and energy dispersive spectrometry. Samples were successfully consolidated after sintering, which presented theoretical density values higher than 99%. The microstructures of the sintered Ti-10Si-5B and Ti-20Si-10B alloys revealed the presence of the TiSS, TiB, TiB2, Ti5Si3, Ti5Si4, TiSi, and TiSi2.phases. A small amount of Ti6Si2B was formed after high-pressure assisted sintering of the Ti-20Si-10B alloy (5GPa, 1100°C for 60 s) indicating that equilibrium structures were not achieved during short sintering times. No oxygen and carbon contamination was detected in structures of Ti-Si-B alloys after high-pressure sintering at 1100 and 1200°C without controlled atmosphere. © (2012) Trans Tech Publications, Switzerland.

Interaction between mesenchymal stem cells and Ti-30Ta alloy after surface treatment

In this study, in vitro cytocompatibility was investigated in the Ti-30Ta alloy after two kinds of surfaces treatments: alkaline and biomimetic treatment. Each condition was evaluated by scanning electron microscopy/energy-dispersive X-ray spectroscopy. Cellular adhesion, viability, protein expression, morphology, and differentiation were evaluated with Bone marrow stromal cells (MSCs) to investigate the short and long-term cellular response by fluorescence microscope imaging and colorimetric assays techniques. Two treatments exhibited similar results with respect to total protein content and enzyme activity as compared with alloy without treatment. However, it was observed improved of the biomineralization, bone matrix formation, enzyme activity, and MSCs functionality after biomimetic treatment. These results indicate that the biomimetic surface treatment has a high potential for enhanced osseointegration. © 2013 Wiley Periodicals, Inc.

Correlative light-electron fractography for fatigue striations characterization in metallic alloys

The correlative light-electron fractography technique combines correlative microscopy concepts to the extended depth-from-focus reconstruction method, associating the reliable topographic information of 3-D maps from light microscopy ordered Z-stacks to the finest lateral resolution and large focus depth from scanning electron microscopy. Fatigue striations spacing analysis can be precisely measured, by correcting the mean surface tilting with the knowledge of local elevation data from elevation maps. This new technique aims to improve the accuracy of quantitative fractography in fatigue fracture investigations. Microsc. Res. Tech. 76:909-913, 2013. © 2013 Wiley Periodicals, Inc.

Caracterização do mineral zircão através do método de traços de fissão, espectroscopia micro-raman e MEV: geocronologia do grupo Bauru

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese, caracterização e avaliação eletroquímica de nanopartículas intermetálicas ordenadas PtSb e PtSn

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Estudo comparativo in vivo de implantes Ti-cp com superfícies comerciais e modificadas por laser sem e com depósito de sílica: análises biomecânica, topográfica e histomorfométrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da resistência de união à tração e espessura de camada híbrida : influência de sistemas adesivos e condições de substrato dentinário

Pós-graduação em Ciências Odontológicas - FOAR

Caracterização mecânica e microestrutural de um aço de baixo carbono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da superfície da liga Ti-30Ta após crescimento de nanotubos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise taxonômica e molecular de Cestoda nematotaeniidae parasito de intestino delgado de Rhinella marina (Linnaeus, 1758) (Amphibia: Bufonidae) de Belém-Pa

Os anfíbios da espécie Rhinella marina também conhecidos como Sapo-Cururu e possuem distribuição mundial. Possuem hábitos noturnos, e devido a sua alimentação bem diversificada vivem em diferentes habitats. Assim podem estar parasitados com uma variedade de helmintos. Dentre os helmintos, os cestodas são o objeto de estudo deste trabalho. Os membros da Família Nematotaennidae são comumente encontrados parasitando o intestino delgado de anfíbios e répteis. O presente trabalho tem como objetivo identificar e caracterizar morfologicamente e molecularmente um cestoda parasito de R. marina da cidade de Belém-PA. Para isso vinte hospedeiros foram capturados em domicílios da região metropolitana de Belém-PA e, após necropsia, os cestoda foram retirados do intestino delgado, alguns exemplares foram fixados em A.F.A, alguns fixados em Glutaraldeído a 2% em tampão cacodilato, e outros em álcool absoluto para serem processados para diferentes técnicas. Parte da amostra foi desidratada em uma série etanólica, corados com Carmin®, clarificados com Salicilato de Metila®. Alguns exemplares foram desidratados e incluídos em parafina para realização de cortes transversais e longitudinais. Os exemplares fixados em glutaraldeído foram desidratados e incluídos em Historesina®. Os cestoda também foram processados para microscopia Eletrônica de Varredura. A identificação foi realizada por meio de desenhos realizados no microscópio Olympus BX 41 com câmara clara, fotografias feitas em microscópio MEDILUX, com sistema de captura de imagem e MEV. Os Cortes histológicos longitudinais foram fotografados e com o Software RECONSTRUCTTM foi realizada a reconstrução tridimensional do corpo do parasito. Helmintos fixados em álcool absoluto foram submetidos a extração de DNA, amplificação gênica pela técnica de PCR e seqüenciamento de nucleotídeos. Os cestoda possuem um corpo cilíndrico, filiforme e indistintamente segmentado, exceto na porção posterior. Escólice com quatro ventosas sem rostéolo ou órgão apical, os proglotes grávidos apresentam duas cápsulas piriformes, que se fundem na base, contendo os ovos. A partir das observações por microscopia eletrônica e luz dos cestoda encontrados no intestino delgado de R. marina, observou-se que estes cestoda pertencem à Família Nematotaeniidae, no entanto os outros caracteres morfológicos e moleculares por nós encontrados não encaixam este cestóide em nenhum gênero desta Família.

Alterações histológicas e bioquímicas e potencial fisiológico de sementes de soja

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da morfologia funcional reprodutiva e desenvolvimento larval em laboratório de Stenopus hispidus(Olivier, 1811) (Crustacea, Decapoda, Stenopodidea)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)