Techno-Economic and Life Cycle Assessment on Lignocellulosic Biomass Thermochemical Conversion Technologies: A Review

Bioenergy derived from biomass provides a promising energy alternative and can reduce the greenhouse gas (GHG) emissions generated from fossil fuels. Biomass-based thermochemical conversion technologies have been acknowledged as apt options to convert bioresources into bioenergy; this bioenergy includes electricity, heat, and fuels/chemicals in solid, liquid, and gaseous phases. In this review, the techno-economic and life cycle assessment of these technologies (combustion, gasification, pyrolysis, liquefaction, carbonization, and co-firing) are summarized. Specific indicators (production costs in a techno-economic analysis, functional units and environmental impacts in a life cycle analysis) for different technologies were compared. Finally, gaps in research and future trends in biomass thermochemical conversion were identified. This review could be used to guide future research related to economic and environmental benefits of bioenergy.

Assessment of the double-skin façade passive thermal buffer effect.

Double Skin Façades (DSFs) are becoming increasingly popular architecture for commercial office buildings. Although DSFs are widely accepted to have the capacity to offer significant passive benefits and enable low energy building performance, there remains a paucity of knowledge with regard to their operation. Identification of the most determinant architectural parameters of DSFs is the focus of ongoing research. This paper presents an experimental and simulation study of a DSF installed on a commercial building in Dublin, Ireland. The DSF is south facing and acts to buffer the building from winter heat losses, but risks enhancing over-heating on sunny days. The façade is extensively monitored during winter months. Computational Fluid Dynamic (CFD) models are used to simulate the convective operation of the DSF. This research concludes DSFs as suited for passive, low energy architecture in temperature climates such as Ireland but identifies issues requiring attention in DSF design.

Comparative Assessment of Methods for Measuring Consensual Poverty: Sort Card Versus CAPI

Poverty means more than having a low income and includes exclusion from a minimally accepted way of life. It is now common practice in Europe to measure progress against poverty in terms of low income, material deprivation rates and some combination of both. This makes material deprivation indicators, and their selection, highly significant in its own right. The ‘consensual poverty’ approach is to identify deprivation items which a majority of the population agree constitute life’s basic necessities, accepting that these items will need revised over time to reflect social change. Traditionally, this has been carried out in the UK through specialised poverty surveys using a Sort Card (SC) technique.

Based on analysis of a 2012 omnibus survey, and discussions with three interviewers, this article examines how perception of necessities is affected by mode of administration – SC and Computer Assisted Personal Interviewing (CAPI). More CAPI respondents scored deprivation items necessary. Greatest disparities are in material items where 25 out of 32 items were significantly higher via CAPI. Closer agreement is found in social participation with 3 out of 14 activities significantly different. Consensus is higher on children’s material deprivation.
We consider influencing variables which could account for the disparities and believe that the SC method produces a more considered response. However, in light of technological advances, we question how long the SC method will remain socially acceptable. This paper concludes that the CAPI method can be easily modified without compromising the benefits of the SC method in capturing thoughtful responses.

Clinical end points for drug treatment trials in BCR-ABL1-negative classic myeloproliferative neoplasms: consensus statements from European LeukemiaNET (ELN) and Internation Working Group-Myeloproliferative Neoplasms Research and Treatment (IWG-MRT)

The discovery of somatic mutations, primarily JAK2V617F and CALR, in classic BCR-ABL1-negative myeloproliferative neoplasms (MPNs) has generated interest in the development of molecularly targeted therapies, whose accurate assessment requires a standardized framework. A working group, comprised of members from European LeukemiaNet (ELN) and International Working Group for MPN Research and Treatment (IWG-MRT), prepared consensus-based recommendations regarding trial design, patient selection and definition of relevant end points. Accordingly, a response able to capture the long-term effect of the drug should be selected as the end point of phase II trials aimed at developing new drugs for MPNs. A time-to-event, such as overall survival, or progression-free survival or both, as co-primary end points, should measure efficacy in phase III studies. New drugs should be tested for preventing disease progression in myelofibrosis patients with early disease in randomized studies, and a time to event, such as progression-free or event-free survival should be the primary end point. Phase III trials aimed at preventing vascular events in polycythemia vera and essential thrombocythemia should be based on a selection of the target population based on new prognostic factors, including JAK2 mutation. In conclusion, we recommended a format for clinical trials in MPNs that facilitates communication between academic investigators, regulatory agencies and drug companies.

Physical activity assessment in cystic fibrosis: A position statement

Background

The aim of this position statement was to inform the choice of physical activity tools for use within CF research and clinical settings.

Methods

A systematic review of physical activity tools to explore evidence for reliability, validity, and responsiveness. Narrative answers to “four key questions” on motion sensors, questionnaires and diaries were drafted by the core writing team and then discussed at the Exercise Working Group in ECFS Lisbon 2013.

Results and summary

Our current position is that activity monitors such as SenseWear or ActiGraph offer informed choices to facilitate a comprehensive assessment of physical activity, and should as a minimum report on dimensions of physical activity including energy expenditure, step count and time spent in different intensities and sedentary time. The DigiWalker pedometer offers an informed choice of a comparatively inexpensive method of obtaining some measurement of physical activity. The HAES represents an informed choice of questionnaire to assess physical activity. There is insufficient data to recommend the use of one diary over another. Future research should focus on providing additional evidence of clinimetric properties of these and new physical activity assessment tools, as well as further exploring the added value of physical activity assessment in CF.

Assessment of Intervention Fidelity and Recommendations for Researchers Conducting Studies on the Diagnosis and Treatment of Chronic Cough in the Adult: CHEST Guideline and Expert Panel Report

BACKGROUND: Successful management of chronic cough has varied in the primary research studies in the reported literature. One of the potential reasons relates to a lack of intervention fidelity to the core elements of the diagnostic and/or therapeutic interventions that were meant to be used by the investigators.

METHODS: We conducted a systematic review to summarize the evidence supporting intervention fidelity as an important methodologic consideration in assessing the effectiveness of clinical practice guidelines used for the diagnosis and management of chronic cough. We developed and used a tool to assess for five areas of intervention fidelity. Medline (PubMed), Scopus, and the Cochrane Database of Systematic Reviews were searched from January 1998 to May 2014. Guideline recommendations and suggestions for those conducting research using guidelines or protocols to diagnose and manage chronic cough in the adult were developed and voted upon using CHEST Organization methodology.

RESULTS: A total of 23 studies (17 uncontrolled prospective observational, two randomized controlled, and four retrospective observational) met our inclusion criteria. These articles included 3,636 patients. Data could not be pooled for meta-analysis because of heterogeneity. Findings related to the five areas of intervention fidelity included three areas primarily related to the provider and two primarily related to the patients. In the area of study design, 11 of 23 studies appeared to be underpinned by a single guideline/protocol; for training of providers, two of 23 studies reported training, and zero of 23 reported the use of an intervention manual; and for the area of delivery of treatment, when assessing the treatment of gastroesophageal reflux disease, three of 23 studies appeared consistent with the most recent guideline/protocol referenced by the authors. For receipt of treatment, zero of 23 studies mentioned measuring concordance of patient-interventionist understanding of the treatment recommended, and zero of 23 mentioned measuring enactment of treatment, with three of 23 measuring side effects and two of 23 measuring adherence. The overall average intervention fidelity score for all 23 studies was poor (20.74 out of 48).

CONCLUSIONS: Only low-quality evidence supports that intervention fidelity strategies were used when conducting primary research in diagnosing and managing chronic cough in adults. This supports the contention that some of the variability in the reporting of patients with unexplained or unresolved chronic cough may be due to lack of intervention fidelity. By following the recommendations and suggestions in this article, researchers will likely be better able to incorporate strategies to address intervention fidelity, thereby strengthening the validity and generalizability of their results that provide the basis for the development of trustworthy guidelines.

What defines a geochemical map? Implications for environmental assessment.

The environmental quality of land is often assessed by the calculation of threshold values which aim to differentiate between concentrations of elements based on whether the soils are in residential or industrial sites. In Europe, for example, soil guideline values exist for agricultural and grazing land. A threshold is often set to differentiate between concentrations of the element that naturally occur in the soil and concentrations that result from diffuse anthropogenic sources. Regional geochemistry and, in particular, single component geochemical maps are increasingly being used to determine these baseline environmental assessments. The key question raised in this paper is whether the geochemical map can provide an accurate interpretation on its own. Implicit is the thought that single component geochemical maps represent absolute abundances. However,because of the compositional (closed) nature of the data univariate geochemical maps cannot be compared directly with one another.. As a result, any interpretation based on them is vulnerable to spurious correlation problems. What does this mean for soil geochemistry mapping, baseline quality documentation, soil resource assessment or risk evaluation? Despite the limitation of relative abundances, individual raw geochemical maps are deemed fundamental to several applications of geochemical maps including environmental assessments. However, element toxicity is related to its bioavailable concentration, which is lowered if its source is mixed with another source. Elements interact, for example under reducing conditions with iron oxides, its solid state is lost and arsenic becomes soluble and mobile. Both of these matters may be more adequately dealt with if a single component map is not interpreted in isolation to determine baseline and threshold assessments. A range of alternative compositionally compliant representations based on log-ratio and log-contrast approaches are explored to supplement the classical single component maps for environmental assessment. Case study examples are shown based on the Tellus soil geochemical dataset, covering Northern Ireland and the results of in vitro oral bioaccessibility testing carried out on a sub-set of archived Tellus Survey shallow soils following the Unified BARGE (Bioaccessibility Research Group of Europe).

Assessment Of various sensors for structural health monitoring for bridge weigh-in-motion (B-WIM).

In recent years, Structural Health Monitoring (SHM) systems have been developed to monitor bridge deterioration, assess real load levels and hence extend bridge life and safety. A road bridge is only safe if the stresses caused by the passing vehicles are less than the capacity of the bridge to resist them. Conventional SHM systems can be used to improve knowledge of the bridges capacity to resist stresses but generally give no information on the causes of any increase in stresses (based on measuring strain). The concept of in Bridge Weigh-in-Motion (B-WIM) is to establish axle loads, without interruption to traffic flow, by using strain sensors at a bridge soffit and subsequently converting the data to real time axle loads or stresses. Recent studies have shown it would be most beneficial to develop a portable system which can be easily attached to existing and new bridge structures for a specified monitoring period. The sensors could then be left in place while the data acquisition can be moved for various other sites. Therefore it is necessary to find accurate sensors capable of capturing peak strains under dynamic load and suitable methods for attaching these strain sensors to existing and new bridge structures. Additionally, it is important to ensure accurate strain transfer between concrete and steel, the adhesives layer and the strain sensor. This paper describes research investigating the suitably of using various sensors for the monitoring of concrete structures under dynamic vehicle load. Electrical resistance strain (ERS) gauges, vibrating wire (VW) gauges and fibre optic sensors (FOS) are commonly used for SHM. A comparative study will be carried out to select a suitable sensor for a bridge Weigh in Motion System. This study will look at fixing methods, durability, scanning rate and accuracy range. Finite element modeling is used to predict the strains which are then validated in laboratory trials.

Functional bilingualism: Definition and ways of assessment

The purpose of the article is to research an issue concerning the bilingual status of students majoring in English as a foreign language at Tomsk State University and similar universities. The authors focus on a brief description of types of bilingualism to define the category best suited to the EFL students and discuss the complementing uses of traditionally accepted (TOEFL+ etc.) and alternative language assessment procedures (The Peabody Picture Vocabulary Test) for the stated target group to assess their competence in international education and balanced cross-cultural communication.

Impact of non-pharmacological interventions on prevention and treatment of delirium in critically ill patients: protocol for a systematic review of quantitative and qualitative research

Background: Critically ill patients have an increased risk of developing delirium during their intensive care stay.To date, pharmacological interventions have not been shown to be effective for delirium management but non-pharmacological interventions have shown some promise. The aim of this systematic review is to identify effective non-pharmacological interventions for reducing the incidence or the duration of delirium in critically ill patients.

Methods: We will search MEDLINE, EMBASE, CINAHL, Web of Science, AMED, psycINFO and the Cochrane Library.We will include studies of critically ill adults and children. We will include randomised trials and controlled trials which measure the effectiveness of one or more non-pharmacological interventions in reducing incidence or duration ofdelirium in critically ill patients. We will also include qualitative studies that provide an insight into patients and their families’ experiences of delirium and non-pharmacological interventions. Two independent reviewers will assess studies for eligibility, extract data and appraise quality. We will conduct meta-analyses if possible or present results narratively.Qualitative studies will also be reviewed by two independent reviewers, and a specially designed quality assessment tool incorporating the CASP framework and the POPAY framework will be used to assess quality.

Discussion: Although non-pharmacological interventions have been studied in populations outside of intensive care units and multicomponent interventions have successfully reduced incidence and duration of delirium, no systematic review of non-pharmacological interventions specifically targeting delirium in critically ill patients have been undertaken to date. This systematic review will provide evidence for the development of a multicomponent intervention for delirium management of critically ill patients that can be tested in a subsequent multicentre randomised trial.

The prevalence of caries in patients referred for orthodontic assessment in Northern Ireland – A retrospective study

Objectives: To determine the prevalence of untreated carious lesions in permanent teeth in patients (under the age of 18) referred for an orthodontic assessment in specialist practice. In addition, the figures shall be compared with national data for Northern Ireland (as outlined in the recent Child Dental Health Survey 2013)
The Gold standard would be that 100% of patients would be caries free upon presentation.

Methods: The clinical records and radiographs (OPT of quality grading 1 or 2) of 337 patients were reviewed. This encompassed patients who had an orthodontic assessment carried out in specialist practice over a 6 month period (following referral from their general dental practitioner)

Results: A total of 337 patient records were examined. Of these, 149 were male (44.2%) and 188 were female (55.8%), with an age range of 7-17 years at the time of new patient assessment. It was found that 36 patients (10.7%) had evidence (clinical and/or radiographic) of active and untreated dental caries. Of those affected, 14 were male and 22 were female.
Breaking the data down in terms of age, we can also get some indication as to how this cohort compares with national data for Northern Ireland :⃰

7-10 years (Mean = 9.3) = 14.3% caries (versus NI average of 6% for 8 year olds)
11-13 years (Mean = 12.1) = 10.1% caries, (versus NI average of 16% for 12 year olds)
14-17 years (Mean = 15.2) = 9.1% caries (versus NI average of 15% for 15 year olds)

⃰using the diagnostic threshold “Decay into dentine (visual dentine caries excluded)”


Conclusion: In this sample group, a total of 10.7% of patients (9.4% of males, 11.7% of females) presented with evidence of undiagnosed caries upon being assessed as a new patient in specialist orthodontic practice. Hence, the gold standard was not met.

Improving E-Assessment Systems With A focus On Adaptive Feedback And Marking

Institutions involved in the provision of tertiary education across Europe are feeling the pinch. European universities, and other higher education (HE) institutions, must operate in a climate where the pressure of government spending cuts (Garben, 2012) is in stark juxtaposition to the EU’s strategy to drive forward and maintain a growth of student numbers in the sector (eurostat, 2015).

In order to remain competitive, universities and HE institutions are making ever-greater use of electronic assessment (E-Assessment) systems (Chatzigavriil et all, 2015; Ferrell, 2012). These systems are attractive primarily because they offer a cost-effect and scalable approach for assessment. In addition to scalability, they also offer reliability, consistency and impartiality; furthermore, from the perspective of a student they are most popular because they can offer instant feedback (Walet, 2012).

There are disadvantages, though.

First, feedback is often returned to a student immediately on competition of their assessment. While it is possible to disable the instant feedback option (this is often the case during an end of semester exam period when assessment scores must be can be ratified before release), however, this option tends to be a global ‘all on’ or ‘all off’ configuration option which is controlled centrally rather than configurable on a per-assessment basis.

If a formative in-term assessment is to be taken by multiple groups of
students, each at different times, this restriction means that answers to each question will be disclosed to the first group of students undertaking the assessment. As soon as the answers are released “into the wild” the academic integrity of the assessment is lost for subsequent student groups.

Second, the style of feedback provided to a student for each question is often limited to a simple ‘correct’ or ‘incorrect’ indicator. While this type of feedback has its place, it often does not provide a student with enough insight to improve their understanding of a topic that they did not answer correctly.

Most E-Assessment systems boast a wide range of question types including Multiple Choice, Multiple Response, Free Text Entry/Text Matching and Numerical questions. The design of these types of questions is often quite restrictive and formulaic, which has a knock-on effect on the quality of feedback that can be provided in each case.

Multiple Choice Questions (MCQs) are most prevalent as they are the most prescriptive and therefore most the straightforward to mark consistently. They are also the most amenable question types, which allow easy provision of meaningful, relevant feedback to each possible outcome chosen.
Text matching questions tend to be more problematic due to their free text entry nature. Common misspellings or case-sensitivity errors can often be accounted for by the software but they are by no means fool proof, as it is very difficult to predict in advance the range of possible variations on an answer that would be considered worthy of marks by a manual marker of a paper based equivalent of the same question.

Numerical questions are similarly restricted. An answer can be checked for accuracy or whether it is within a certain range of the correct answer, but unless it is a special purpose-built mathematical E-Assessment system the system is unlikely to have computational capability and so cannot, for example, account for “method marks” which are commonly awarded in paper-based marking.

From a pedagogical perspective, the importance of providing useful formative feedback to students at a point in their learning when they can benefit from the feedback and put it to use must not be understated (Grieve et all, 2015; Ferrell, 2012).

In this work, we propose a number of software-based solutions, which will overcome the limitations and inflexibilities of existing E-Assessment systems.