Algunas aplicaciones de los plásticos en las industrias del empaque y automotriz

The role of plastic materials in the packaging and automotive industries is commented. Specific applications such as poly(ethylene-terephtalate) as gas barrier on the soft-drink bottle industry and low density polyethylene on the flexible packaging industry are presented. The use of polypropylene, high density polyethylene and polyamides are also mentioned.

Conceção de produtos de design de malhas sustentáveis e inovadores

Dissertação para obtenção do grau de Mestre em Design de Moda, apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Avaliação da abertura de filtração de geotêxteis sob confinamento e parcialmente colmatados

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Ammonium uptake, transport and nitrogen economy in forest trees

AMMONIUM UPTAKE, TRANSPORT AND NITROGEN ECONOMY IN FOREST TREES Francisco M. Cánovas, Concepción Avila, Fernando N. de la Torre, Rafael A. Cañas, Belén Pascual, Vanessa Castro- Rodríguez, Jorge El-Azaz Departamento de Biología Molecular y Bioquímica, Facultad de Ciencias, Universidad de Málaga, Spain. Email: canovas@uma.es Forests ecosystems play a fundamental role in the regulation of global carbon fixation and preservation of biodiversity. Forest trees are also of great economic value because they provide a wide range of products of commercial interest, including wood, pulp, biomass and important secondary metabolites. The productivity of most forest ecosystems is limited by low nitrogen availability and woody perennials have developed adaptation mechanisms, such as ectomycorrhizal associations, to increase the efficiency of N acquisition and metabolic assimilation. The efficient acquisition, assimilation and economy of nitrogen are of special importance in trees that must cope with seasonal periods of growth and dormancy over many years. In fact, the ability to accumulate nitrogen reserves and to recycle N is crucial to determine the growth and production of forest biomass. Ammonium is the predominant form of inorganic nitrogen in the soil of temperate forests and many research efforts are addressed to study the regulation of ammonium acquisition, assimilation and internal recycling for the biosynthesis of amino acids, particularly those relevant for nitrogen storage. In our laboratory, we are interested in studying nitrogen metabolism and its regulation in maritime pine (Pinus pinaster L. Aiton), a conifer species of great ecological and economic importance in Europe and for which whole-transcriptome resources are available. The metabolism of phenylalanine plays a central role in the channeling of carbon from photosynthesis to the biosynthesis of phenylpropanoids and the regulation of this pathway is of broad significance for nitrogen economy of maritime pine. We are currently exploring the molecular properties and regulation of genes involved in the biosynthesis and metabolic fates of phenylalanine in maritime pine. An overview of this research programme will be presented and discussed. Research supported by Spanish Ministry of Economy and Competitiveness and Junta de Andalucía (Grants BIO2015-69285-R, BIO2012-0474 and research group BIO-114).

Desempenho zootécnico de girinos de rã-touro com diferentes níveis de proteína e energia digestíveis

A partir dos valores de digestibilidade de alguns ingredientes foram propostas dietas, com diferentes níveis de proteína e energia digestíveis, em esquema fatorial 3 x 3, destinadas a girinos de rã-touro para avaliar o desempenho zootécnico. O experimento, com duração de 60 dias, foi conduzido com 810 girinos, oriundos da mesma desova, distribuídos em 27 caixas de polipropileno, em uma densidade de 1girino/L. O delineamento experimental foi um esquema fatorial com três níveis de proteína digestível (27; 31 e 35%) e três níveis de energia digestível (2.700; 2.800 e 2.900kcal/kg) com três réplicas. Os parâmetros avaliados aos 60 dias foram ganho de peso, consumo da dieta, consumo em proteína da dieta, conversão alimentar, taxa de eficiência proteica e índice de sobrevivência. Os resultados foram submetidos à análise de variância e ao teste de Duncan (95% de precisão). Os resultados encontrados não apresentaram interação entre proteína e energia digestível para nenhum parâmetro avaliado. em relação à proteína digestível, foram verificadas diferenças nos parâmetros consumo em proteína da dieta e taxa de eficiência proteica (TEP), o que demonstra ineficiência das dietas com altos valores proteicos. Deve-se oferecer aos girinos de rã-touro dietas com 27% de proteína digestível, por apresentarem melhor resultado para taxa de eficiência proteica e para consumo em proteína da dieta.

Synthesis of porous graphene/TiO2 by use of recycled graphite

Graphene-based nanomaterials are a kind of new technological materials with high interest for physicists, chemists and materials scientists. Graphene is a two-dimensional (2-D) sheet of carbon atoms in a hexagonal configuration with atoms bonded by sp2 bonds. These bonds and this electron configuration provides the extraordinary properties of graphene, such as very large surface area, a tunable band gap, high mechanical strength and high elasticity and thermal conductivity [1]. Graphene has also been investigated for preparation of composites with various semiconductors like TiO2, ZnO, CdS aiming at enhanced photocatalytic activity for their use for photochemical reaction as water splitting or CO2 to methanol conversion [2-3]. In this communication, the synthesis of porous graphene@TiO2 obtained from a powder graphite recycled, supplied by ECOPIBA, is presented. This graphite was exfoliated, using a nonionic surfactant (Triton X-100) and sonication. Titanium(IV) isopropoxide was used as TiO2 source. After removing the surfactant with a solution HCl/n-propanol, a porous solid is obtained with a specific area of 358 m2g-1. The solid was characterized by XRD, FTIR, XPS, EDX and TEM. Figure 1 shows the graphene 2D layer bonded with nanoparticles of TiO2. When a water suspension of this material is exposed with UV-vis radiation, water splitting reaction is carried out and H2/O2 bubbles are observed (Figure 2)

Nitrogen removal and sustainability of vertical flow constructed wetlands for small scale wastewater treatment

The challenge for wastewater professionals is to design and operate treatment processes that support human well being and are environmentally sensitive throughout the life-cycle. This research focuses on one technology for small-scale wastewater treatment: the vertical flow constructed wetland (VFCW), which is herein investigated for the capacity to remove ammonium and nitrate nitrogen from wastewater. Hydraulic regime and presence/absence of vegetation are the basis for a three-phase bench scale experiment to determine oxygen transfer and nitrogen fate in VFCWs. Results show that 90% NH4+-N removal is achieved in aerobic downflow columns, 60% NO3--N removal occurs in anaerobic upflow columns, and 60% removal of total nitrogen can be achieved in downflow-upflow in-series. The experimental results are studied further using a variably saturated flow and reactive transport model, which allows a mechanistic explanation of the fate and transport of oxygen and nitrogen. The model clarifies the mechanisms of oxygen transport and nitrogen consumption, and clarifies the need for readily biodegradable COD for denitrification. A VFCW is then compared to a horizontal flow constructed wetland (HFCW) for life cycle environmental impacts. High areal emissions of greenhouse gases from VFCWs compared to HFCWs are the driver for the study. The assessment shows that because a VFCW is only 25% of the volume of an HFCW designed for the same treatment quality, the VFCW has only 25-30% of HFCW impacts over 12 impact categories and 3 damage categories. Results show that impacts could be reduced by design improvements. Design recommendations are downflow wetlands for nitrification, upflow wetlands for denitrification, series wetlands for total nitrogen removal, hydraulic load of 142 L/m2d, 30 cm downflow wetland depth, 1.0 m upflow wetland depth, recycle, vegetation and medium-grained sand. These improvements will optimize nitrogen removal, minimize gaseous emissions, and reduce wetland material requirements, thus reducing environmental impact without sacrificing wastewater treatment quality.

CHARACTERIZATION OF THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE–BASED COMPOSITES FOR FUEL CELL BIPOLAR PLATES AND DEVELOPMENT OF EDUCATIONAL TOOLS IN HYDROGEN AND FUEL CELL TECHNOLOGIES

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi–walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbons’ Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International’s FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through–plane and in–plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in–plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through–plane and in–plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single–filler formulations. For thermal conductivity, Nielsen’s model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen’s model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

If we can't have it, then no one should : Shutting down versus selling in family business portfolios

How does a business family manage its business portfolio in times of declining performance to sustain the portfolio's long-term endurance? Drawing on social identity theory and six family business portfolios from Pakistan, we find that business families may prefer to shut down a satellite business rather than sell it, which is primarily driven by identity considerations. In addition, the family's goal to recycle the assets, the aim to restart the business later, and the increasing decline in performance are important contingency factors. This study contributes to the literature on portfolio entrepreneurship, business exit, and the enduring entrepreneurship of family firms.

Gestión de la cadena de suministro de Bimbo

El presente trabajo es un informe final sobre los procesos de producción, logística y distribución de la empresa Bimbo. El informe está conformado por aspectos teóricos y prácticos, de esta manera, brinda información clara y concreta sobre los antecedentes más importantes de esta organización y su contribución a la productividad del país. La información presentada ha sido recolectada mediante una revisión teórica y una visita a sus instalaciones en Veracruz, México. De esta manera, se han estudiado sus procesos y logística de producción y cómo contribuyen en la eficiencia y calidad de la empresa; así mismo, son fundamentales para diagnosticar los aspectos a mejorar de la entidad. Por otro lado, gracias a la visita, se logró desarrollar habilidades administrativas que hasta el momento solo estaban en teoría. Llegar a un contexto real y con problemáticas evidentes permitió consolidar el aprendizaje que se obtuvo durante años en la carrera para plasmarlos en la labor. Así mismo, el detallar las instalaciones de Bimbo permitió alcanzar una mayor perspectiva con respecto a los aspectos importantes dentro del panorama organizacional; tales como la producción, la gestión y mejora de los procesos de la compañía. Esto se logró realizando labores correspondientes a la inspección, observación, revisión de logística y el análisis de los procesos productivos. El trabajo práctico indudablemente sirvió para acrecentar los conocimientos obtenidos en la universidad.

Reciclaje de residuos sólidos domésticos y conductas pro-ambientales en una comunidad residencial de Bogotá, Colombia

Introducción: La implicación social dentro de la problemática ambiental, establece una relación causal entre hábitos e impacto ambiental; aspectos del comportamiento humano tales como la conveniencia, familiaridad, presión social y actitud, nos permiten realizar un acercamiento acerca de la decisión de reciclar o no en un hogar. Objetivo: identificar los factores ambientales asociados con el manejo de residuos domésticos entre los miembros de una comunidad residencial en la ciudad de Bogotá. Materiales y métodos: Se realizó un estudio transversal realizado a 200 personas de una comunidad residencial. La evaluación de la conducta pro-ambiental se llevó a cabo por medio de la utilización de la Escala del Comportamiento Pro-ambiental desarrollada por Corral-Verdugo unida a la escala de Reciclaje de Sidique. Para el tratamiento estadístico se empleó el análisis de regresión lineal múltiple. Resultados: La mayoría de los encuestados fueron hombres (55%), con una mediana de edad de 37,5 años. Más de la mitad tenía por lo menos formación en pregrado (53%), el 55,5% contaban con un empleo al momento de la entrevista, cerca del 50% de las personas refirieron tener casa propia y la mediana del tamaño de las mismas fue de 80 m2. De los aspectos sociodemográficos, el tipo de vivienda, sexo y edad, estuvieron relacionados con los factores ambientales pro reciclaje. Mientras que las conductas proambientales relacionadas fueron: altruismo, frugalidad, conducta ecológica general, indignación y aprecio por la naturaleza. Conclusiones: Las conductas proambientales Altruismo, Frugalidad, Conducta Ecológica, Indignación y Aprecio por lo natural, están relacionadas con la intención de reciclar. Para futuras investigaciones es necesario constatar la realización del comportamiento proambiental, para aseverar de manera irrebatible que las dimensiones analizadas pueden soportar una acción real y no un auto reporte de una conducta.

Comparing pollination control bag types for sorghum seed harvest.

Efficacy of pollination bags made of new nonwoven fabrics was compared with the traditional paper bags in sorghum during 2015 using three cultivars comprising BR007B (red seeded), SC283 (white seeded) and 1167048 hybrid with tannin (brown seeded). The five pollination bag treatments were: no bagging, traditional paper bag, paper bag plus plastic screen bag for extra bird protection, duraweb®SG2 polypropylene bag and duraweb®SG1 polyester bag. There was no bird damage on tannin hybrid but birds damaged bags to access grains of the other two varieties. Varieties and bag types differed significantly, and also showed significant interactions for panicle weight (at P<0.06), seed weight and average seed weight per panicle. The tannin hybrid was consistently a better performer for all traits regardless of bag type. The paper bags were the worst for bird damage. Duraweb® SG1 was the best performer for all traits including bird damage followed by duraweb®SG2. The joint regression analysis showed that BR007B performed consistently under all bag types with average response. On the other hand, SC283 improved its response with the increasing quality of bag type at an above average rate for panicle weight and seed traits. It was concluded that new nonwoven fabric bags could replace paper bags in providing better seed production potential and greater protection against bird damage.