Sulfur concentrations and isotope ratios in sediments from Kiel Bay, western Baltic Sea

The isotope-ratios of sulfur-components in several sedimentologically different cores of recent marine sediments from Kiel Bay (Baltic Sea) were investigated. In addition, quantitative determinations were made on total sulfur, sulfate, sulfide, chloride, organic carbon, iron and watercontent in the sediment or in the pore-water solution. The investigations gave the following results: 1. The sulfur in the sediment (about 0.3 -2 % of the dry sample) was for the most part introduced into the sediment after sedimentation. This confirms the results of Kaplan et al. (1963, doi:10.1016/0016-7037(63)90074-7). The yield of Sulfur from organic material is very small (in our samples about 5-10% of the total sulfur in the sediment). 2. The sulfur bound in the sediment is taken from the sulfate of the interstitial water. During normal sedimentation, the exchange of sulfate by diffusion significant for changes in the sulfur-content goes down to a sediment depth of 4-6 cm. In this way the sulfate consumed by reduction and formation of sulfide or pyrite is mostly replaced. The uppermost layer of the sediment is an partly open system for the sulfur. The diagenesis of the sulfur is allochemical. 3. The isotope-values of the sediment-sulfur are largely influenced by the sulfur coming into the sediment by diffusion and being bound by bacteriological reduction. Due to the prevailing reduction of 32S and reverse-diffusion of sulfate into the open sea-water, an 32S enrichment takes place in the uppermost layer of the sediment. delta34S-values in the sediment range between -15 and -35 ? while seawater-sulfate has +20 ?. No relationship could be established between sedimentological or chemical changes and isotope-ratios. In the cores, successive sandy and clayly layers showed no change in the delta-values. The sedimentation rate, however, seems to influence isotope-ratios. In one core with low sedimentationrates the delta34S-values varied between -29 and -33 ?, while cores with higher sedimentationrates showed values between -17 and -24 ?. 4. As sediment depth increases, the pore-water sulfate shows decreasing concentrations (in a depth of 30-40 cm we found between 20 and 70 % of the seawater-values), and increasing delta 34S-values (in one case reaching more than +60 ?). The concentration of sulfide in the pore-water increases with sediment-depth (reaching 80 mg S/l in one case). The (delta34S-values of the pore-water-sulfide in all cores show increases paralleling the sulfate sulfur, with a nearly constant delta-distance of 50-60 ? in all cores. This seems to confirm the genetic relationship between the two components.

Foraminiferal trace element ratios from South Atlantic sediments

The rate of uranium accumulation in oceanic sediments from seawater is controlled by bottom water oxygen concentrations and organic carbon fluxes-two parameters that are linked to deep ocean storage of CO2. To investigate glacial-interglacial changes in what is known as authigenic U, we have developed a rapid method for its determination as a simple addition to a procedure for foraminiferal trace element analysis. Foraminiferal calcite acts as a low U substrate (U/Ca < 15 nmol/mol) upon which authigenic U accumulates in reducing sediments. We measured a downcore record of foraminiferal U/Ca from ODP Site 1090 in the South Atlantic and found that U/Ca ratios increase by 70-320 nmol/mol during glacial intervals. There is a significant correlation between U/Ca records of benthic and planktonic foraminiferal species and between U/Ca and bulk sediment authigenic U. These results indicate that elevated U/Ca ratios are attributable to the accumulation of authigenic U coatings in sediments. Foraminiferal Mn/Ca ratios were lower during the glacial intervals, suggesting that the observed U accumulation on the shells is not directly linked to U incorporation into secondary manganese phases. Thus, foraminiferal U/Ca ratios may provide useful information on past changes in sediment redox conditions.

Stable isotope ratios of foraminifera from last glacial-interglacial sediments of the southern high latitudes

A set of numerical equations is developed to estimate past sea surface temperatures (SST) from fossil Antarctic diatoms. These equations take into account both the biogeographic distribution and experimentally derived silica dissolution. The data represent a revision and expansion of a floral data base used previously and includes samples resulting from progressive opal dissolution experiments. Factor analysis of 166 samples (124 Holocene core top and 42 artificial samples) resolved four factors. Three of these factors depend on the water mass distribution (one Subantarctic and two Antarctic assemblages); factor 4 corresponds to a 'dissolution assemblage'. Inclusion of this factor in the data analysis minimizes the effect of opal dissolution on the assemblages and gives accurate estimates of SST over a wide range of biosiliceous dissolution. A transfer function (DTF 166/34/4) is derived from the distribution of these factors versus summer SST. Its standard error is +/- 1°C in the -1 to +10 °C summer temperature range. This transfer function is used to estimate SST changes in two southern ocean cores (43°S and 55°S) which cover the last climatic cycle. The time scale is derived from the changes in foraminiferal oxygen and carbon isotopic ratios. The reconstructed SST records present strong analogies with the air temperature record over Antarctica at the Vostok site, derived from changes in the isotopic ratio of the ice. This similarity may be used to compare the oceanic isotope stratigraphy and the Vostok time scale derived from ice flow model. The oceanic time scale, if taken at face value, would indicate that large changes in ice accumulation rates occurred between warm and cold periods.

B/Ca ratios in planktonic foraminifera

Boron isotope systematics indicate that boron incorporation into foraminiferal CaCO3 is determined by the partition coefficient, KD = [B/Ca](CaCO3)/[B(OH)4**-/HCO3**-](seawater), and [B(OH)4?/HCO3?](seawater), providing, in principle, a method to estimate seawater pH and PCO2. We have measured B/Ca ratios in Globigerina bulloides and Globorotaliainflata for a series of core tops from the North Atlantic and the Southern Ocean and in Globigerinoides ruber (white) from Ocean Drilling Program (ODP) site 668B on the Sierra Leone Rise in the eastern equatorial Atlantic. B/Ca ratios in these species of planktonic foraminifera seem unaffected by dissolution on the seafloor. KD shows a strong species-specific dependence on calcification temperature, which can be corrected for using the Mg/Ca temperature proxy. A preliminary study of G. inflata from Southern Ocean sediment core CHAT 16K suggests that temperature-corrected B/Ca was ~30% higher during the last glacial. Correspondingly, pH was 0.15 units higher and aqueous PCO2 was 95 ?atm lower at this site at the Last Glacial Maximum. The covariation between reconstructed PCO2 and the atmospheric pCO2 from the Vostok ice core demonstrates the feasibility of using B/Ca in planktonic foraminifera for reconstructing past variations in pH and PCO2.

Carbon/oxygen ratios, clay composition and gas-hydrate saturation of ODP Leg 164 sites

The analyses of downhole log data from Ocean Drilling Program (ODP) boreholes on the Blake Ridge at Sites 994, 995, and 997 indicate that the Schlumberger geochemical logging tool (GLT) may yield useful gas hydrate reservoir data. In neutron spectroscopy downhole logging, each element has a characteristic gamma ray that is emitted from a given neutron-element interaction. Specific elements can be identified by their characteristic gamma-ray signature, with the intensity of emission related to the atomic elemental concentration. By combining elemental yields from neutron spectroscopy logs, reservoir parameters including porosities, lithologies, formation fluid salinities, and hydrocarbon saturations (including gas hydrate) can be calculated. Carbon and oxygen elemental data from the GLT was used to determine gas hydrate saturations at all three sites (Sites 994, 995, and 997) drilled on the Blake Ridge during Leg 164. Detailed analyses of the carbon and oxygen content of various sediments and formation fluids were used to construct specialized carbon/oxygen ratio (COR) fan charts for a series of hypothetical gas hydrate accumulations. For more complex geologic systems, a modified version of the standard three-component COR hydrocarbon saturation equation was developed and used to calculate gas hydrate saturations on the Blake Ridge. The COR-calculated gas hydrate saturations (ranging from about 2% to 14% bulk volume gas hydrate) from the Blake Ridge compare favorably to the gas hydrate saturations derived from electrical resistivity log measurements.

Inclination of the two main components of magnetization and 87Sr/86Sr ratios for dolomites at DSDP Hole 77-536

Site 536 terminated in a shallow-water dolomite of unknown age. Paleomagnetic measurements combined with strontium isotope analyses suggest that the dolomite was deposited in the Middle Jurassic to Early Cretaceous time interval. However, the assumptions required to reach this determination make these results less than conclusive.

Element ratios and stable isotopes of foraminifers from ODP Site 202-1237

Downcore records of magnesium/calcium, strontium/calcium, manganese/calcium, and oxygen and carbon isotopes of planktonic and benthic foraminifers from Ocean Drilling Program (ODP) Site 1237 on the Peru-Chile margin provide critical information regarding the history of climate in the region over the past 6 m.y. Specifically, these records can be used to infer the sea-surface temperature (SST) and sea-surface salinity (SSS) history of a region that today is associated with substantial wind stress curl-driven upwelling (Shipboard Scientific Party, 2003, doi:10.2973/odp.proc.ir.202.108.2003). This report provides data tables and other supporting information for measurements made on planktonic and benthic foraminifers from Site 1237. Items included in this report are (1) oxygen and carbon isotopic measurements of planktonic and benthic foraminifers and (2) Mg/Ca, Sr/Ca, and Mn/Ca ratio measurements of planktonic foraminifers from Holes 1237B, 1237C, and 1237D.

87Sr/86Sr ratios of planktonic foraminifers and interstitial waters at DSDP Hole 90-593

Detailed profiles of the Sr isotopic compositions of fossil planktonic foraminifers and interstitial waters have been measured from DSDP Site 593 to determine the Sr isotopic composition of seawater during the last 40 m.y. Foraminiferal recrystallization was assessed through scanning electron microscopy (SEM) and Sr/Ca ratios. Foraminifers were shown to be well preserved. Results document that the seawater 87Sr/86Sr has increased continuously but not uniformly, since the latest Eocene.

Strontium isotope ratios of planktonic foraminifera from late Neogene sediment samples

A curve describing the variation of the strontium isotopic composition of seawater for the late Neogene (9 to 2 Ma) was constructed from 87Sr/86Sr analyses of marine carbonate in five Deep Sea Drilling Project (DSDP) sites: 502, 519, 588, 590, and 593. The strontium isotopic composition of the oceans increased between 9 and 2 Ma with several changes in slope. From 9 to 5.5 Ma, 87Sr/86Sr values were nearly constant at ~0.708925. Between 5.5 and 4.5 Ma, 87Sr/86Sr ratios increased monotonically at a rate of not, vert, similar 1 * 10**-4 per million years. The steep slope during this interval provides the potential for high resolution strontium isotope stratigraphy across the Miocene/Pliocene boundary. The rate of change of 87Sr/86Sr decreases to near zero again during the interval 4.5-2.5 Ma, and ratios average 0.709025. The relatively rapid increase of 87Sr/86Sr between 5.5 and 4.5 Ma must be related to changes in the flux or average 87Sr/86Sr ratios of the major inputs of Sr to the oceans. Quantitative modelling of these inputs suggests that the increase was most probably caused by an increase in the dissolved riverine flux of strontium to the oceans, an increase in the average 87Sr/86Sr composition of river water, or some combination of these parameters. Modelling of this period as a transient-state requires a pulse-like increase in the input of 87Sr to the oceans between 5.5 and 4.5 Ma. Alternatively, the 5.5-4.5 Ma period can be modelled as a simple transition from one steady-state to another if the oceanic residence time of strontium was eight times less than the currently accepted value of 4 Ma. During the time interval of steep 87Sr/86Sr increase, other geochemical and sedimentologic changes also occur including an increase in sediment accumulation rates, a drop in the calcite compensation depth (CCD), and a decrease in the delta13C of dissolved bicarbonate (i.e., "carbon shift"). The simplest mechanism to explain 87Sr/86Sr variation and these related geochemical changes is to invoke an increase in the dissolved chemical fluxes carried by rivers to the oceans. This, in turn, implies increased chemical denudation rates of the continents and shelves during the late Neogene. The increase in chemical weathering rates is attributed to increased exposure of the continents by eustatic regression, intensified glacial/interglacial cycles, and accelerated rates of global tectonism beginning at 5.5 Ma during the latest Miocene.

Stable oxygen isotope ratios of marine barite from Cenozoic sediments

We report new data on oxygen isotopes in marine sulfate (delta18O[SO4]), measured in marine barite (BaSO4), over the Cenozoic. The delta18O[SO4] varies by 6x over the Cenozoic, with major peaks 3, 15, 30 and 55 Ma. The delta18O[SO4] does not co-vary with the delta18O[SO4], emphasizing that different processes control the oxygen and sulfur isotopic composition of sulfate. This indicates that temporal changes in the delta18O[SO4] over the Cenozoic must reflect changes in the isotopic fractionation associated with the sulfide reoxidation pathway. This suggests that variations in the aerial extent of different types of organic-rich sediments may have a significant impact on the biogeochemical sulfur cycle and emphasizes that the sulfur cycle is less sensitive to net organic carbon burial than to changes in the conditions of that organic carbon burial. The delta18O[SO4] also does not co-vary with the d18O measured in benthic foraminifera, emphasizing that oxygen isotopes in water and sulfate remain out of equilibrium over the lifetime of sulfate in the ocean. A simple box model was used to explore dynamics of the marine sulfur cycle with respect to both oxygen and sulfur isotopes over the Cenozoic. We interpret variability in the delta18O[SO4] to reflect changes in the aerial distribution of conditions within organic-rich sediments, from periods with more localized, organic-rich sediments, to periods with more diffuse organic carbon burial. While these changes may not impact the net organic carbon burial, they will greatly affect the way that sulfur is processed within organic-rich sediments, impacting the sulfide reoxidation pathway and thus the delta18O[SO4]. Our qualitative interpretation of the record suggests that sulfate concentrations were probably lower earlier in the Cenozoic.