Incorporating spatial correlations into multispecies mean-field models

In biology, we frequently observe different species existing within the same environment. For example, there are many cell types in a tumour, or different animal species may occupy a given habitat. In modelling interactions between such species, we often make use of the mean field approximation, whereby spatial correlations between the locations of individuals are neglected. Whilst this approximation holds in certain situations, this is not always the case, and care must be taken to ensure the mean field approximation is only used in appropriate settings. In circumstances where the mean field approximation is unsuitable we need to include information on the spatial distributions of individuals, which is not a simple task. In this paper we provide a method that overcomes many of the failures of the mean field approximation for an on-lattice volume-excluding birth-death-movement process with multiple species. We explicitly take into account spatial information on the distribution of individuals by including partial differential equation descriptions of lattice site occupancy correlations. We demonstrate how to derive these equations for the multi-species case, and show results specific to a two-species problem. We compare averaged discrete results to both the mean field approximation and our improved method which incorporates spatial correlations. We note that the mean field approximation fails dramatically in some cases, predicting very different behaviour from that seen upon averaging multiple realisations of the discrete system. In contrast, our improved method provides excellent agreement with the averaged discrete behaviour in all cases, thus providing a more reliable modelling framework. Furthermore, our method is tractable as the resulting partial differential equations can be solved efficiently using standard numerical techniques.

The wrong tool for the job? The predictive powers of the DBQ in a sample of Queensland motorists

Introduction This study reports on the application of the Manchester Driver Behaviour Questionnaire (DBQ) to examine the self-reported driving behaviours (e.g., speeding, errors & aggressive manoeuvres) and predict crash involvement among a sample of general Queensland motorists. Material and Methods Surveys were completed by 249 general motorists on-line or via a pen-and-paper format. Results A factor analysis revealed a three factor solution for the DBQ which was consistent with previous Australian-based research. It accounted for 40.5% of the total variance, although some cross-loadings were observed on nine of the twenty items. The internal reliability of the DBQ was satisfactory. However, multivariate analysis using the DBQ revealed little predictive ability of the tool to predict crash involvement or demerit point loss e.g. violation notices. Rather, exposure to the road was found to be predictive of crashes, although speeding did make a small contribution to those who recently received a violation notice. Conclusions Taken together, the findings contribute to a growing body of research that raises questions about the predictive ability of the most widely used driving assessment tool globally. Ongoing research (which also includes official crash and offence outcomes) is required to better understand the actual contribution that the DBQ can make to understanding and improving road safety. Future research should also aim to confirm whether this lack of predictive efficacy originates from broader issues inherent within self-report data (e.g., memory recall problems) or issues underpinning the conceptualisation of the scale.

Real - time prediction of rainfall induced instability of residual soil slopes associated with deep cracks

The early warning based on real-time prediction of rain-induced instability of natural residual slopes helps to minimise human casualties due to such slope failures. Slope instability prediction is complicated, as it is influenced by many factors, including soil properties, soil behaviour, slope geometry, and the location and size of deep cracks in the slope. These deep cracks can facilitate rainwater infiltration into the deep soil layers and reduce the unsaturated shear strength of residual soil. Subsequently, it can form a slip surface, triggering a landslide even in partially saturated soil slopes. Although past research has shown the effects of surface-cracks on soil stability, research examining the influence of deep-cracks on soil stability is very limited. This study aimed to develop methodologies for predicting the real-time rain-induced instability of natural residual soil slopes with deep cracks. The results can be used to warn against potential rain-induced slope failures. The literature review conducted on rain induced slope instability of unsaturated residual soil associated with soil crack, reveals that only limited studies have been done in the following areas related to this topic: - Methods for detecting deep cracks in residual soil slopes. - Practical application of unsaturated soil theory in slope stability analysis. - Mechanistic methods for real-time prediction of rain induced residual soil slope instability in critical slopes with deep cracks. Two natural residual soil slopes at Jombok Village, Ngantang City, Indonesia, which are located near a residential area, were investigated to obtain the parameters required for the stability analysis of the slope. A survey first identified all related field geometrical information including slope, roads, rivers, buildings, and boundaries of the slope. Second, the electrical resistivity tomography (ERT) method was used on the slope to identify the location and geometrical characteristics of deep cracks. The two ERT array models employed in this research are: Dipole-dipole and Azimuthal. Next, bore-hole tests were conducted at different locations in the slope to identify soil layers and to collect undisturbed soil samples for laboratory measurement of the soil parameters required for the stability analysis. At the same bore hole locations, Standard Penetration Test (SPT) was undertaken. Undisturbed soil samples taken from the bore-holes were tested in a laboratory to determine the variation of the following soil properties with the depth: - Classification and physical properties such as grain size distribution, atterberg limits, water content, dry density and specific gravity. - Saturated and unsaturated shear strength properties using direct shear apparatus. - Soil water characteristic curves (SWCC) using filter paper method. - Saturated hydraulic conductivity. The following three methods were used to detect and simulate the location and orientation of cracks in the investigated slope: (1) The electrical resistivity distribution of sub-soil obtained from ERT. (2) The profile of classification and physical properties of the soil, based on laboratory testing of soil samples collected from bore-holes and visual observations of the cracks on the slope surface. (3) The results of stress distribution obtained from 2D dynamic analysis of the slope using QUAKE/W software, together with the laboratory measured soil parameters and earthquake records of the area. It was assumed that the deep crack in the slope under investigation was generated by earthquakes. A good agreement was obtained when comparing the location and the orientation of the cracks detected by Method-1 and Method-2. However, the simulated cracks in Method-3 were not in good agreement with the output of Method-1 and Method-2. This may have been due to the material properties used and the assumptions made, for the analysis. From Method-1 and Method-2, it can be concluded that the ERT method can be used to detect the location and orientation of a crack in a soil slope, when the ERT is conducted in very dry or very wet soil conditions. In this study, the cracks detected by the ERT were used for stability analysis of the slope. The stability of the slope was determined using the factor of safety (FOS) of a critical slip surface obtained by SLOPE/W using the limit equilibrium method. Pore-water pressure values for the stability analysis were obtained by coupling the transient seepage analysis of the slope using finite element based software, called SEEP/W. A parametric study conducted on the stability of an investigated slope revealed that the existence of deep cracks and their location in the soil slope are critical for its stability. The following two steps are proposed to predict the rain-induced instability of a residual soil slope with cracks. (a) Step-1: The transient stability analysis of the slope is conducted from the date of the investigation (initial conditions are based on the investigation) to the preferred date (current date), using measured rainfall data. Then, the stability analyses are continued for the next 12 months using the predicted annual rainfall that will be based on the previous five years rainfall data for the area. (b) Step-2: The stability of the slope is calculated in real-time using real-time measured rainfall. In this calculation, rainfall is predicted for the next hour or 24 hours and the stability of the slope is calculated one hour or 24 hours in advance using real time rainfall data. If Step-1 analysis shows critical stability for the forthcoming year, it is recommended that Step-2 be used for more accurate warning against the future failure of the slope. In this research, the results of the application of the Step-1 on an investigated slope (Slope-1) showed that its stability was not approaching a critical value for year 2012 (until 31st December 2012) and therefore, the application of Step-2 was not necessary for the year 2012. A case study (Slope-2) was used to verify the applicability of the complete proposed predictive method. A landslide event at Slope-2 occurred on 31st October 2010. The transient seepage and stability analyses of the slope using data obtained from field tests such as Bore-hole, SPT, ERT and Laboratory tests, were conducted on 12th June 2010 following the Step-1 and found that the slope in critical condition on that current date. It was then showing that the application of the Step-2 could have predicted this failure by giving sufficient warning time.

Towards a dignified and sustainable electricity generation sector in Australia : a comparative review of three models

Electricity is the cornerstone of modern life. It is essential to economic stability and growth, jobs and improved living standards. Electricity is also the fundamental ingredient for a dignified life; it is the source of such basic human requirements as cooked food, a comfortable living temperature and essential health care. For these reasons, it is unimaginable that today's economies could function without electricity and the modern energy services that it delivers. Somewhat ironically, however, the current approach to electricity generation also contributes to two of the gravest and most persistent problems threatening the livelihood of humans. These problems are anthropogenic climate change and sustained human poverty. To address these challenges, the global electricity sector must reduce its reliance on fossil fuel sources. In this context, the object of this research is twofold. Initially it is to consider the design of the Renewable Energy (Electricity) Act 2000 (Cth) (Renewable Electricity Act), which represents Australia's primary regulatory approach to increase the production of renewable sourced electricity. This analysis is conducted by reference to the regulatory models that exist in Germany and Great Britain. Within this context, this thesis then evaluates whether the Renewable Electricity Act is designed effectively to contribute to a more sustainable and dignified electricity generation sector in Australia. On the basis of the appraisal of the Renewable Electricity Act, this thesis contends that while certain aspects of the regulatory regime have merit, ultimately its design does not represent an effective and coherent regulatory approach to increase the production of renewable sourced electricity. In this regard, this thesis proposes a number of recommendations to reform the existing regime. These recommendations are not intended to provide instantaneous or simple solutions to the current regulatory regime. Instead, the purpose of these recommendations is to establish the legal foundations for an effective regulatory regime that is designed to increase the production of renewable sourced electricity in Australia in order to contribute to a more sustainable and dignified approach to electricity production.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.

How Can Models of Motor Control Be Useful for Understanding Low Back Pain?

Introduction. The purpose of this chapter is to address the question raised in the chapter title. Specifically, how can models of motor control help us understand low back pain (LBP)? There are several classes of models that have been used in the past for studying spinal loading, stability, and risk of injury (see Reeves and Cholewicki (2003) for a review of past modeling approaches), but for the purpose of this chapter we will focus primarily on models used to assess motor control and its effect on spine behavior. This chapter consists of 4 sections. The first section discusses why a shift in modeling approaches is needed to study motor control issues. We will argue that the current approach for studying the spine system is limited and not well-suited for assessing motor control issues related to spine function and dysfunction. The second section will explore how models can be used to gain insight into how the central nervous system (CNS) controls the spine. This segues segue nicely into the next section that will address how models of motor control can be used in the diagnosis and treatment of LBP. Finally, the last section will deal with the issue of model verification and validity. This issue is important since modelling accuracy is critical for obtaining useful insight into the behavior of the system being studied. This chapter is not intended to be a critical review of the literature, but instead intended to capture some of the discussion raised during the 2009 Spinal Control Symposium, with some elaboration on certain issues. Readers interested in more details are referred to the cited publications.

Improving in vivo models of fracture fixation associated osteomyelitis

This project’s aim was to create new experimental models in small animals for the investigation of infections related to bone fracture fixation implants. Animal models are essential in orthopaedic trauma research and this study evaluated new implants and surgical techniques designed to improve standardisation in these experiments, and ultimately to minimise the number of animals needed in future work. This study developed and assessed procedures using plates and inter-locked nails to stabilise fractures in rabbit thigh bones. Fracture healing was examined with mechanical testing and histology. The results of this work contribute to improvements in future small animal infection experiments.

Rodent Models of Conditioned Fear: Behavioral Measures of Fear and Memory

Pavlovian fear conditioning is a robust technique for examining behavioral and cellular components of fear learning and memory. In fear conditioning, the subject learns to associate a previously neutral stimulus with an inherently noxious co-stimulus. The learned association is reflected in the subjects' behavior upon subsequent re-exposure to the previously neutral stimulus or the training environment. Using fear conditioning, investigators can obtain a large amount of data that describe multiple aspects of learning and memory. In a single test, researchers can evaluate functional integrity in fear circuitry, which is both well characterized and highly conserved across species. Additionally, the availability of sensitive and reliable automated scoring software makes fear conditioning amenable to high-throughput experimentation in the rodent model; thus, this model of learning and memory is particularly useful for pharmacological and toxicological screening. Due to the conserved nature of fear circuitry across species, data from Pavlovian fear conditioning are highly translatable to human models. We describe equipment and techniques needed to perform and analyze conditioned fear data. We provide two examples of fear conditioning experiments, one in rats and one in mice, and the types of data that can be collected in a single experiment. © 2012 Springer Science+Business Media, LLC.

Pavlovian fear memory circuits and phenotype models of PTSD

Pavlovian fear conditioning, also known as classical fear conditioning is an important model in the study of the neurobiology of normal and pathological fear. Progress in the neurobiology of Pavlovian fear also enhances our understanding of disorders such as posttraumatic stress disorder (PTSD) and with developing effective treatment strategies. Here we describe how Pavlovian fear conditioning is a key tool for understanding both the neurobiology of fear and the mechanisms underlying variations in fear memory strength observed across different phenotypes. First we discuss how Pavlovian fear models aspects of PTSD. Second, we describe the neural circuits of Pavlovian fear and the molecular mechanisms within these circuits that regulate fear memory. Finally, we show how fear memory strength is heritable; and describe genes which are specifically linked to both changes in Pavlovian fear behavior and to its underlying neural circuitry. These emerging data begin to define the essential genes, cells and circuits that contribute to normal and pathological fear.

Communication models of institutional online communities : the role of the ABC cultural intermediary

The co-creation of cultural artefacts has been democratised given the recent technological affordances of information and communication technologies. Web 2.0 technologies have enabled greater possibilities of citizen inclusion within the media conversations of their nations. For example, the Australian audience has more opportunities to collaboratively produce and tell their story to a broader audience via the public service media (PSM) facilitated platforms of the Australian Broadcasting Corporation (ABC). However, providing open collaborative production for the audience gives rise to the problem, how might the PSM manage the interests of all the stakeholders and align those interests with its legislated Charter? This paper considers this problem through the ABC’s user-created content participatory platform, ABC Pool and highlights the cultural intermediary as the role responsible for managing these tensions. This paper also suggests cultural intermediation is a useful framework for other media organisations engaging in co-creative activities with their audiences.

Communication models of institutional online communities : the role of the ABC cultural intermediary

The co-creation of cultural artefacts has been democratised given the recent technological affordances of information and communication technologies. Web 2.0 technologies have enabled greater possibilities of citizen inclusion within the media conversations of their nations. For example, the Australian audience has more opportunities to collaboratively produce and tell their story to a broader audience via the public service media (PSM) facilitated platforms of the Australian Broadcasting Corporation (ABC). However, providing open collaborative production for the audience gives rise to the problem, how might the PSM manage the interests of all the stakeholders and align those interests with its legislated Charter? This paper considers this problem through the ABC’s user-created content participatory platform, ABC Pool and highlights the cultural intermediary as the role responsible for managing these tensions. This paper also suggests cultural intermediation is a useful framework for other media organisations engaging in co-creative activities with their audiences.

Vorinostat/SAHA-induced apoptosis in malignant mesothelioma is FLIP/caspase 8-dependent and HR23B-independent

Introduction: Malignant pleural mesothelioma (MPM) is a rapidly fatal malignancy that is increasing in incidence. The caspase 8 inhibitor FLIP is an anti-apoptotic protein over-expressed in several cancer types including MPM. The histone deacetylase (HDAC) inhibitor Vorinostat (SAHA) is currently being evaluated in relapsed mesothelioma. We examined the roles of FLIP and caspase 8 in regulating SAHA-induced apoptosis in MPM. Methods: The mechanism of SAHA-induced apoptosis was assessed in 7 MPM cell lines and in a multicellular spheroid model. SiRNA and overexpression approaches were used, and cell death was assessed by flow cytometry, Western blotting and clonogenic assays. Results: RNAi-mediated FLIP silencing resulted in caspase 8-dependent apoptosis in MPM cell line models. SAHA potently down-regulated FLIP protein expression in all 7 MPM cell lines and in a multicellular spheroid model of MPM. In 6/7 MPM cell lines, SAHA treatment resulted in significant levels of apoptosis induction. Moreover, this apoptosis was caspase 8-dependent in all six sensitive cell lines. SAHA-induced apoptosis was also inhibited by stable FLIP overexpression. In contrast, down-regulation of HR23B, a candidate predictive biomarker for HDAC inhibitors, significantly inhibited SAHA-induced apoptosis in only 1/6 SAHA-sensitive MPM cell lines. Analysis of MPM patient samples demonstrated significant inter-patient variations in FLIP and caspase 8 expressions. In addition, SAHA enhanced cisplatin-induced apoptosis in a FLIP-dependent manner. Conclusions: These results indicate that FLIP is a major target for SAHA in MPM and identifies FLIP, caspase 8 and associated signalling molecules as candidate biomarkers for SAHA in this disease. © 2011 Elsevier Ltd. All rights reserved.

EGFR expression as a predictor of survival for first-line chemotherapy plus cetuximab in patients with advanced non-small-cell lung cancer : analysis of data from the phase 3 FLEX study

Background: Findings from the phase 3 First-Line ErbituX in lung cancer (FLEX) study showed that the addition of cetuximab to first-line chemotherapy significantly improved overall survival compared with chemotherapy alone (hazard ratio [HR] 0·871, 95% CI 0·762-0·996; p=0·044) in patients with advanced non-small-cell lung cancer (NSCLC). To define patients benefiting most from cetuximab, we studied the association of tumour EGFR expression level with clinical outcome in FLEX study patients. Methods: We used prospectively collected tumour EGFR expression data to generate an immunohistochemistry score for FLEX study patients on a continuous scale of 0-300. We used response data to select an outcome-based discriminatory threshold immunohistochemistry score for EGFR expression of 200. Treatment outcome was analysed in patients with low (immunohistochemistry score <200) and high (≥200) tumour EGFR expression. The primary endpoint in the FLEX study was overall survival. We analysed patients from the FLEX intention-to-treat (ITT) population. The FLEX study is registered with ClinicalTrials.gov, number NCT00148798. Findings: Tumour EGFR immunohistochemistry data were available for 1121 of 1125 (99·6%) patients from the FLEX study ITT population. High EGFR expression was scored for 345 (31%) evaluable patients and low for 776 (69%) patients. For patients in the high EGFR expression group, overall survival was longer in the chemotherapy plus cetuximab group than in the chemotherapy alone group (median 12·0 months [95% CI 10·2-15·2] vs 9·6 months [7·6-10·6]; HR 0·73, 0·58-0·93; p=0·011), with no meaningful increase in side-effects. We recorded no corresponding survival benefit for patients in the low EGFR expression group (median 9·8 months [8·9-12·2] vs 10·3 months [9·2-11·5]; HR 0·99, 0·84-1·16; p=0·88). A treatment interaction test assessing the difference in the HRs for overall survival between the EGFR expression groups suggested a predictive value for EGFR expression (p=0·044). Interpretation: High EGFR expression is a tumour biomarker that can predict survival benefit from the addition of cetuximab to first-line chemotherapy in patients with advanced NSCLC. Assessment of EGFR expression could offer a personalised treatment approach in this setting. Funding: Merck KGaA. © 2012 Elsevier Ltd.

Block models for improved earthwork allocation planning in linear infrastructure construction

Earthwork planning has been considered in this article and a generic block partitioning and modelling approach has been devised to provide strategic plans of various levels of detail. Conceptually this approach is more accurate and comprehensive than others, for instance those that are section based. In response to environmental concerns the metric for decision making was fuel consumption and emissions. Haulage distance and gradient are also included as they are important components of these metrics. Advantageously the fuel consumption metric is generic and captures the physical difficulties of travelling over inclines of different gradients, that is consistent across all hauling vehicles. For validation, the proposed models and techniques have been applied to a real world road project. The numerical investigations have demonstrated that the models can be solved with relatively little CPU time. The proposed block models also result in solutions of superior quality, i.e. they have reduced fuel consumption and cost. Furthermore the plans differ considerably from those based solely upon a distance based metric thus demonstrating a need for industry to reflect upon their current practices.

Emergency Health Services (EHS) : demand and service delivery models. monograph 3 : patients’ reasons and perceptions

Executive Summary Emergency health is a critical component of Australia’s health system and emergency departments (EDs) are increasingly congested from growing demand and blocked access to inpatient beds. The Emergency Health Services Queensland (EHSQ) study aims to identify the factors driving increased demand for emergency health and to evaluate strategies which may safely reduce the future demand growth. This monograph addresses the perspectives of users of both ambulance services and EDs. The research reported here aimed to identify the perspectives of users of emergency health services, both ambulance services and public hospital Emergency Departments and to identify the factors that they took into consideration when exercising their choice of location for acute health care. A cross-sectional survey design was used involving a survey of patients or their carers presenting to the EDs of a stratified sample of eight hospitals. A specific purpose questionnaire was developed based on a novel theoretical model which had been derived from analysis of the literature (Monograph 1). Two survey versions were developed: one for adult patients (self-complete); and one for children (to be completed by parents/guardians). The questionnaires measured perceptions of social support, health status, illness severity, self-efficacy; beliefs and attitudes towards ED and ambulance services; reasons for using these services, and actions taken prior to the service request. The survey was conducted at a stratified sample of eight hospitals representing major cities (four), inner regional (two) and outer regional and remote (two). Due to practical limitations, data were collected for ambulance and ED users within hospital EDs, while patients were waiting for or under treatment. A sample size quota was determined for each ED based on their 2009/10 presentation volumes. The data collection was conducted by four members of the research team and a group of eight interviewers between March and May 2011 (corresponding to autumn season). Of the total of 1608 patients in all eight emergency departments the interviewers were able to approach 1361 (85%) patients and seek their consent to participate in the study. In total, 911 valid surveys were available for analysis (response rate= 67%). These studies demonstrate that patients elected to attend hospital EDs in a considered fashion after weighing up alternatives and there is no evidence of deliberate or ill-informed misuse. • Patients attending ED have high levels of social support and self-efficacy that speak to the considered and purposeful nature of the exercise of choice. • About one third of patients have new conditions while two thirds have chronic illnesses • More than half the attendees (53.1%) had consulted a healthcare professional prior to making the decision. • The decision to seek urgent care at an ED was mostly constructed around the patient’s perception of the urgency and severity of their illness, reinforced by a strong perception that the hospital ED was the correct location for them (better specialised staff, better care for my condition, other options not as suitable). • 33% of the respondent held private hospital insurance but nevertheless attended a public hospital ED. Similarly patients exercised considered and rational judgements in their choice to seek help from the ambulance service. • The decision to call for ambulance assistance was based on a strong perception about the severity of the illness (too severe to use other means of transport) and that other options were not considered appropriate. • The decision also appeared influenced by a perception that the ambulance provided appropriate access to the ED which was considered most appropriate for their particular condition (too severe to go elsewhere, all facilities in one spot, better specialised and better care). • In 43.8% of cases a health care professional advised use of the ambulance. • Only a small number of people perceived that ambulance should be freely available regardless of severity or appropriateness. These findings confirm a growing understanding that the choice of professional emergency health care services is not made lightly but rather made by reasonable people exercising a judgement which is influenced by public awareness of the risks of acute health and which is most often informed by health professionals. It is also made on the basis of a rational weighing up of alternatives and a deliberate and considered choice to seek assistance from a service which the patient perceived was most appropriate to their needs at that time. These findings add weight to dispensing with public perceptions that ED and ambulance congestion is a result of inappropriate choice by patients. The challenge for health services is to better understand the patient’s needs and to design and validate services that meet those needs. The failure of our health system to do so should not be grounds for blaming the patient, claiming inappropriate patient choices.