Mechanisms involved in the maintenance of inbreeding depression in gynodioecious "Silene vulgaris" (Caryophyllaceae): an experimental investigation

Summary Gynodioecy, the joint occurrence of females and hermaphrodites within natural populations, is a widely studied mating system ever since Darwin (1877). It is an exceptional mating system because continuous selection is necessary to maintain it. Since females only reproduce through ovules whereas hermaphrodites transmit genes through ovules and pollen, larger female fitness, in terms of seed output, is required to allow their maintenance. Two non-exclusive mechanisms can account for the maintenance of females. First, as females do not produce pollen they can reallocate their resources towards a higher ovule production. Second, hermaphrodites can self- and cross-fertilize whereas females are obligate outcrossers. Thus hermaphrodites should partly suffer from inbreeding depression (i.e.: the fitness decline of inbred relative to outbred individuals) and thereby produce less fit progeny than females. This thesis investigated the effects of self- and cross-fertilization of heimaphrodites over two consecutive generations. Inbreeding depression increased across the successive stages of the life- cycle (i.e.: from "seed traits" to "reproductive traits") displaying large inbreeding depression estimates (up to 0.76). This investigation not only detected large inbreeding depression estimates but also detected mechanisms involved in the maintenance of inbreeding depression. For instance cryptic self-incompatibility which is here a larger in vivo pollen performance of distant pollen compared to self-pollen; the expression of inbreeding depression especially in late life-cycle stages, and the appearance of females in the progeny of selfed hermaphrodites. The female biased sex ratio in the progeny of selfed hermaphrodites was a surprising result and could either come from the sex determining mechanisms (complex nucleo-cytoplasmic interaction(s)) and/or from inbreeding depression. Indeed, we not only got females and hermaphrodites but also partial male-sterile (PMS) individuals (i.e.: individuals with differing number of viable stamens). We detected that inbred pollen bearing plants (excluding females) have less viable stamens per flower than outbred plants. A positive correlation was detected between inbreeding depression for the number of viable stamens per flower and the difference in sex ratio between inbred and outbred individuals. A positive relationship was also detected between inbreeding depression for pollen viability and inbreeding depression for number of viable stamens per flower. Each correlation can either account for pleiotropic effects (a major gene acting on the two considered traits) or linkage disequilibrium between genes controlling each of the two related traits. If we hypothesize that these correlations are due to a major gene with pleiotropic effects, the positive relationship between inbreeding depression for number of viable stamens per flower and inbreeding depression for pollen viability showed that deleterious alleles present on a major gene coding for pollen production and viability depressed male fitness within inbred plants. The positive relationship between sex ratio difference between inbred and outbred individuals and inbreeding depression for number of viable stamens per flower indicates that (1) either number of viable stamens per flower is, in addition to inbreeding, also affected by the loci coding for sex determinism or, (2) the presence of females within the progeny of selfed hermaphrodites is a consequence of large inbreeding depression inhibiting pollen production, or (3) sex is here determined by a combination of loci coding for sex expression and inbreeding depression for male reproductive traits. In conclusion, Silene vulgaris has been shown to be a good model for understanding the evolution of mating systems that promote outbreeding. Résumé La gynodïoécie est définie comme étant la présence simultanée d'hermaphrodites et de femelles au sein de populations naturelles d'une même espèce. Ce système de reproduction a toujours fasciné le monde scientifique depuis Darwin, comme en témoigne ses écrits (1876, 1877) sur les systèmes de reproduction chez les plantes. Les femelles ne transmettent leurs gènes qu'à travers leurs ovules alors que les hermaphrodites transmettent leurs gènes à la fois par la voie mâle (le pollen) et la voie femelle (les ovules). La condition pour que la gynodïoécie se maintienne nécessite donc une fitness de la fonction femelle plus élevée chez les femelles que chez les hermaphrodites. Deux mécanismes mutuellement non exclusifs peuvent expliquer le maintien des femelles au sein de ces populations gynodioïques. D'une part, les femelles peuvent réallouer les ressources non utilisées pour la production de pollen et peuvent par conséquent produire plus d'ovules. D'autre part, la reproduction des femelles ne peut se faire que par allo-fécondation alors que les hermaphrodites, peuvent se reproduire à la fois par auto- et allo-fécondation. L'autofécondation s'accompagne en général d'une diminution de fitness de la descendance relativement à la progéniture issue d'allo-fécondation ; ce phénomène est connu sous le nom de dépression de consanguinité. Cette thèse avait pour but de mettre en évidence une éventuelle dépression de consanguinité chez Silene vulgaris, une espèce gynodioïque. Des hermaphrodites, issus de trois vallées alpines, ont été auto- et allo¬fécondés sur deux générations successives. La dépression de consanguinité pouvant s'exprimer à tous les stades de vie d'un individu, plusieurs traits de fitness, allant du nombre de graines par fruit à la production de gamètes ont été mesurés sur différents stades de vie successifs. L'estimation de la dépression de consanguinité totale atteignait des valeurs allant de 0.52 à 0.76 selon la vallée considérée, ce qui indiquerait que les hermaphrodites ont tout intérêt à limiter l'autofécondation et que les femelles ne devraient pas avoir de peine à subsister dans les vallées étudiées. Par la même occasion des mécanismes diminuant la purge potentielle du fardeau génétique, et permettant ainsi le maintien du « niveau » de dépression de consanguinité et par conséquence le maintien de la gynodïoécie ont été mis en évidence. En effet, nos résultats montrent que la dépression de consanguinité s'exprimait tard dans le cycle de vie permettant ainsi à un certain nombre individus consanguins de transmettre leurs allèles délétères à la génération suivante. D'autre part, la croissance in vivo des tubes polliniques d'auto-pollen était plus lente que celle de l'allo-pollen et donc en situation de compétition directe, les ovules devraient plutôt être issus d'allo-fécondation, diminuant ainsi les chances de purges d'allèles délétères. Enfin, l'apparition de femelles dans la progéniture d'hermaphrodites autofécondés diminue aussi les chances de purge d'allèles délétères. Il nous a été impossible de déterminer si l'apparition de femelles dans la descendance d'hermaphrodites autofécondés était due au déterminisme génétique du sexe ou si la différence de sexe ratio entre la descendance auto- et allo-fécondée était due à une éventuelle dépression de consanguinité inhibant la production de pollen. Nous avons observé que S. vulgaris ne présentaient pas uniquement des hermaphrodites et des femelles mais aussi toute sorte d'individus intermédiaires avec un nombre variable d'étamines viables. Nous avons pu mettre' en évidence des corrélations positives entre (1) la différence de sexe ratio (la proportion d'individus produisant du pollen) entre individus consanguins et non consanguins et une estimation de la dépression de consanguinité pour le nombre d'étamines viables d'individus produisant du pollen, ainsi qu'entre (2) la dépression de consanguinité pour le nombre d'étamines viables et celle estimée pour la viabilité du pollen. Chaque corrélation indique soit l'effet d'un (ou plusieurs) gène(s) pléiotropique(s), soit un déséquilibre de liaison entre les gènes. En considérant que ces corrélations sont le résultat d'effet pléiotropiques, la relation entre le nombre d'étamines viables par fleur et la viabilité du pollen, indiquerait un effet négatif de la consanguinité sur la production et la viabilité du pollen due partiellement à un gène majeur. La seconde corrélation indiquerait soit que les gènes responsables de la détermination du sexe agissent aussi sur l'expression de la fonction mâle soit que l'expression du sexe est sujette à la dépression de consanguinité, ou encore un mélange des deux. Aux regards de ces résultats, Silene vulgaris s'est avéré être un bon modèle de compréhension de l'évolution des systèmes de reproduction vers la séparation des sexes.

Simulation of interface dynamics across pore discontinuities

We study the dynamics of a water-oil meniscus moving from a smaller to a larger pore. The process is characterised by an abrupt change in the configuration, yielding a sudden energy release. A theoretic study for static conditions provides analytical solutions of the surface energy content of the system. Although the configuration after the sudden energy release is energetically more convenient, an energy barrier must be overcome before the process can happen spontaneously. The energy barrier depends on the system geometry and on the flow parameters. The analytical results are compared to numerical simulations that solve the full Navier-Stokes equation in the pore space and employ the Volume Of Fluid (VOF) method to track the evolution of the interface. First, the numerical simulations of a quasi-static process are validated by comparison with the analytical solutions for a static meniscus, then numerical simulations with varying injection velocity are used to investigate dynamic effects on the configuration change. During the sudden energy jump the system exhibits an oscillatory behaviour. Extension to more complex geometries might elucidate the mechanisms leading to a dynamic capillary pressure and to bifurcations in final distributions of fluid phases in porous

Prothèses totales de genoux. Analyse clinique et numérique des micromouvements de l'implant tibial [Total knee prosthesis. Clinical and numerical study of micromovements of the tibial implant].

INTRODUCTION: The importance of the micromovements in the mechanism of aseptic loosening is clinically difficult to evaluate. To complete the analysis of a series of total knee arthroplasties (TKA), we used a tridimensional numerical model to study the micromovements of the tibial implant. MATERIAL AND METHODS: Fifty one patients (with 57 cemented Porous Coated Anatomic TKAs) were reviewed (mean follow-up 4.5 year). Radiolucency at the tibial bone-cement interface was sought on the AP radiographs and divided in 7 areas. The distribution of the radiolucency was then correlated with the axis of the lower limb as measured on the orthoradiograms. The tridimensional numerical model is based on the finite element method. It allowed the measurement of the cemented prosthetic tibial implant's displacements and the micromovements generated at bone-ciment interface. A total load (2000 Newton) was applied at first vertically and asymetrically on the tibial plateau, thereby simulating an axial deviation of the lower limbs. The vector's posterior inclination then permitted the addition of a tangential component to the axial load. This type of effort is generated by complex biomechanical phenomena such as knee flexion. RESULTS: 81 per cent of the 57 knees had a radiolucent line of at least 1 mm, at one or more of the tibial cement-epiphysis jonctional areas. The distribution of these lucent lines showed that they came out more frequently at the periphery of the implant. The lucent lines appeared most often under the unloaded margin of the tibial plateau, when axial deviation of lower limbs was present. Numerical simulations showed that asymetrical loading on the tibial plateau induced a subsidence of the loaded margin (0-100 microns) and lifting off at the opposite border (0-70 microns). The postero-anterior tangential component induced an anterior displacement of the tibial implant (160-220 microns), and horizontal micromovements with non homogenous distribution at the bone-ciment interface (28-54 microns). DISCUSSION: Comparison of clinical and numerical results showed a relation between the development of radiolucent lines and the unloading of the tibial implant's margin. The deleterious effect of lower limbs' axial deviation is thereby proven. The irregular distribution of lucent lines under the tibial plateau was similar of the micromovements' repartition at the bone-cement interface when tangential forces were present. A causative relation between the two phenomenaes could not however be established. Numerical simulation is a truly useful method of study; it permits to calculate micromovements which are relative, non homogenous and of very low amplitude. However, comparative clinical studies remain as essential to ensure the credibility of results.

Frost Action in Rocks and Concrete, HR-258, 1986

The objectives of the project were to develop methodologies for (i) prediction and measurement of the magnitude of pressure which develops within pores of saturated porous materials upon freezing, (ii) determination of pore structure (pore size distribution) of porous materials; (iii) prediction and measurement of the rate with which pore ice grows; and (iv) prediction of frost susceptibility of porous materials with varying pore structures. As with all research endeavors solution of one problem leads to another one and this project was no exception. Emergence of new problems and the measures taken as the work progressed were discussed in progress reports submitted to the board. This final report will discuss only the conclusive finds and suggest measures to be taken for future investigations. The theory discussed in the proposal is not repeated in this report for the sake of brevity. However, the paper published as part of this project containing the theory is attached as Appendix I for the reader interested in the theory. In conformity with the objectives, this report consists of four parts. In accordance with the project contract two ice porosimeters were built and one will be delivered to the Iowa DOT after training of a DOT technician under the supervision of Mr. Wendell Dubberke with assistance from ISU researchers. During the training period debugging and further improvements in software will continue.

Schwann cell strip for peripheral nerve repair.

Many strategies have been investigated to provide an ideal substitute to treat a nerve gap injury. Initially, silicone conduits were used and more recently conduits fabricated from natural materials such as poly-3-hydroxybutyrate (PHB) showed good results but still have their limitations. Surgically, a new concept optimising harvested autologous nerve graft has been introduced as the single fascicle method. It has been shown that a single fascicle repair of nerve grafting is successful. We investigated a new approach using a PHB strip seeded with Schwann cells to mimic a small nerve fascicle. Schwann cells were attached to the PHB strip using diluted fibrin glue and used to bridge a 10-mm sciatic nerve gap in rats. Comparison was made with a group using conventional PHB conduit tubes filled with Schwann cells and fibrin glue. After 2 weeks, the nerve samples were harvested and investigated for axonal and Schwann cell markers. PGP9.5 immunohistochemistry showed a superior nerve regeneration distance in the PHB strip group versus the PHB tube group (> 10 mm, crossed versus 3.17+/- 0.32 mm respectively, P<0.05) as well as superior Schwann cell intrusion (S100 staining) from proximal (> 10 mm, crossed versus 3.40+/- 0.36 mm, P<0.01) and distal (> 10 mm, crossed versus 2.91+/- 0.31 mm, P<0.001) ends. These findings suggest a significant advantage of a strip in rapidly connecting a nerve gap lesion and imply that single fascicle nerve grafting is advantageous for nerve repair in rats.

Visualization of aqueous shunt position and patency using anterior segment optical coherence tomography.

PURPOSE: To describe the use of anterior segment optical coherence tomography (AS-OCT) to clarify the position and patency of aqueous shunt devices in the anterior chamber of eyes where corneal edema or tube position does not permit a satisfactory view. DESIGN: Noncomparative observational case series. METHODS: Four cases are reported in which aqueous shunt malposition or obstruction was suspected but the shunt could not be seen on clinical examination. The patients underwent AS-OCT to identify the position and patency of the shunt tip. RESULTS: In each case, AS-OCT provided data regarding tube position and/or patency that could not be obtained by slit-lamp examination or by gonioscopy that influenced management. CONCLUSIONS: AS-OCT can be used to visualize anterior chamber tubes in the presence of corneal edema that precludes an adequate view or in cases where the tube is retracted into the cornea. In such cases, AS-OCT is useful in identifying shunt patency and position, which helps guide clinical decision making.

Is it the grain size or the characteristic pore size that controls the induced polarization relaxation time of clean sands and sandstones?

There is a wide range of evidence to suggest that permeability can be constrained through of induced polarization measurements. For clean sands and sandstones, current mechanistic models of induced polarization predict a relationship between the low-frequency time constant inferred from induced polarization measurements and the grain diameter. A number of observations do, however, disagree with this and indicate that the observed relaxation behavior is rather governed by the so-called dynamic pore radius L. To test this hypothesis, we have developed a set of new scaling relationships, which allow the relaxation time to be computed from the pore size and the permeability to be computed from both the Cole-Cole time constant and the formation factor. Moreover, these new scaling relationships can be also used to predict the dependence of the Cole-Cole time constant as a function of the water saturation under unsaturated conditions. Comparative tests of the proposed new relationships with regard to various published experimental results for saturated clean sands and sandstones as well as for partially saturated clean sandstones, do indeed confirm that the dynamic pore radius L is a much more reliable indicator of the observed relaxation behavior than grain-size-based models.

Control of Concrete Deterioration Due to Trace Compounds in Deicers, Phase II, HR-299, 1989

This report presents results of research on ways to reduce the detrimental effects of sulfate-tainted rock salt deicers on portland cement concrete used for highway pavements. Repetitious experiments on the influence of fly ash on the mortar phase of concrete showed significant improvement in resistance to deicing brines is possible. Fifteen to twenty percent by weight of fly ash replacement for portland cement was found to provide optimum improvement. Fly ashes from five sources were evaluated and all were found to be equally beneficial. Preliminary results indicate the type of coarse aggregate also plays an important role in terms of concrete resistance to freeze-thaw in deicing brines. This was particularly true for a porous ferroan dolomite thought to be capable of reaction with the brine. In this case fly ash improved the concrete, but not enough for satisfactory performance. An intermediate response was with a porous limestone where undesirable results were observed without fly ash and adequate performance was realized when 15% fly ash was added. The best combination for making deicer-resistant concrete was found to be with a non-porous limestone. Performance in brines was found to be adequate without fly ash, but better when fly ash was included. Consideration was given to treating existing hardened concrete made with poor aggregate and no fly ash to extend pavement life in the presence of deicers, particularly at joints. Sodium silicate was found to improve freeze-thaw resistance of mortar and is a good candidate for field usage because of its low cost and ease of handling.

A Study to Correlate Soil Consistency Limits with Soil Moisture Tensions, HR-27, 1965

The liquid and plastic limits of a soil are consistency limits that were arbitrarily chosen by Albert Atterberg in 1911. Their determination is by strictly empirical testing procedures. Except for the development of a liquid limit device and subsequent minor refinements the method has remained basically unchanged for over a half century. The empirical determination of an arbitrary limit would seem to be contrary to the very foundations of scientific procedures. However, the tests are relatively simple and the results are generally acceptable and valuable in almost every conceivable use of soil from an engineering standpoint. Such a great volume of information has been collected and compiled by application of these limits to cohesive soils, that it would be impractical and virtually impossible to replace the tests with a more rational testing method. Nevertheless, many believe that the present method is too time consuming and inconsistent. Research was initiated to investigate the development of a rapid and consistent method by relating the limits to soil moisture tension values determined by porous plate and pressure membrane apparatus. With the moisture tension method, hundreds of samples may be run at one time, operator variability is minimal, results are consistent, and a high degree of correlation to present liquid limit tests is possible.

FiltekTM Silorane and FiltekTM Supreme XT resins: tissue reaction after subcutaneous implantation in isogenic mice

The aim of this study was to evaluate the tissue compatibility of a silorane-based resin system (FiltekTM Silorane) and a methacrylatebased nanoparticle resin (FiltekTM Supreme XT) after implantation in the subcutaneous connective tissue of isogenic mice. One hundred and thirty five male isogenic BALB/c mice were randomly assigned to 12 experimental and 3 control groups, according to the implanted material and the experimental period of 7, 21 and 63 days. At the end of each period, the animals were killed and the tubes with the surrounding tissues were removed and processed for microscopic analysis. Samples were subjected to a descriptive and a semi-quantitative analyses using a 4-point scoring system (0-3) to evaluate the collagen fiber formation and inflammatory infiltrate. Data were statistically analyzed using the Kruskal Wallis test (a=0.05). The results showed that there was no significant difference between the experimental and control groups considering the three evaluation periods (p>0.05). The silorane-based and the methacrylate-based nanoparticle resins presented similar tissue response to that of the empty tube (control group) after subcutaneous implantation in isogenic mice.

Pavement Instrumentation, HR-293, 1988

The report documents the development and installation of an instrumented pavement on I-80 in Iowa for the purposes of demonstration and answering current pavement questions. Its two primary objectives include documentation of the installation and verification of existing design procedures through monitoring of the continuous traffic stream reactions in the pavement. Some 120 instruments were installed in a forty foot segment of reconstructed pavement. The instruments included concrete strain gages, weldable strain gages on dowels, LVDT-deflection gages and temperature sensors in the concrete and base material. Five tubes were placed under three joints and two midslabs to measure the relative moisture and density at the interface between the pavement and base with atomic equipment. The instruments were placed ahead of the paving and over 92% of the instruments responded after paving. Planning requirements, problems encountered and costs of installation are presented. The site will use piezoelectric cables in a weigh-in-motion arrangement to trigger the data collection, a microcomputer controlled data acquisition system to analyze multiple sensors simultaneously, and telemetry to monitor the site remotely. Details provide the first time user of instrumentation with valuable information on the planning, problems, costs and coordination required to establish and operate such a site.

The making of frozen-hydrated, vitreous lamellas from cells for cryo-electron microscopy.

There has been a long standing desire to produce thick (up to 500 nm) cryo-sections of fully hydrated cells and tissue for high-resolution analysis in their natural state by cryo-transmission electron microscopy. Here, we present a method that can successfully produce sections (lamellas in FIB-SEM terminology) of fully hydrated, unstained cells from high-pressure frozen samples by focused ion beam (FIB) milling. The samples are therefore placed in thin copper tubes and vitrified by high-pressure freezing. For transfer, handling and subsequent milling, the tubes are placed in a novel connective device (ferrule) that protects the sample from devitrification and contamination and passes through all operation steps. A piezo driven sample positioning stage (cryo-nano-bench, CNB) with three degrees of freedom was additionally developed to enable accurate milling of frozen-hydrated lamellas. With the CNB, high-pressure frozen samples can be milled to produce either thin lamellas (<100 nm), for direct imaging by high-resolution cryo-TEM or thicker lamellas (300-500 nm) for cryo-electron tomography. The sample remains vitreous throughout the process by using the presented tools and methods. The results are an important step towards investigating larger cells and even tissue in there natural state which in the end will enable us to gain better insights into cellular processes.

An operator formulation of the multiscale finite-volume method with correction function

The multiscale finite-volume (MSFV) method has been derived to efficiently solve large problems with spatially varying coefficients. The fine-scale problem is subdivided into local problems that can be solved separately and are coupled by a global problem. This algorithm, in consequence, shares some characteristics with two-level domain decomposition (DD) methods. However, the MSFV algorithm is different in that it incorporates a flux reconstruction step, which delivers a fine-scale mass conservative flux field without the need for iterating. This is achieved by the use of two overlapping coarse grids. The recently introduced correction function allows for a consistent handling of source terms, which makes the MSFV method a flexible algorithm that is applicable to a wide spectrum of problems. It is demonstrated that the MSFV operator, used to compute an approximate pressure solution, can be equivalently constructed by writing the Schur complement with a tangential approximation of a single-cell overlapping grid and incorporation of appropriate coarse-scale mass-balance equations.