A distributed contention-vector division multiple access (D-CVDMA) protocol for wireless networks

Traditional Time Division Multiple Access (TDMA) protocol provides deterministic periodic collision free data transmissions. However, TDMA lacks flexibility and exhibits low efficiency in dynamic environments such as wireless LANs. On the other hand contention-based MAC protocols such as the IEEE 802.11 DCF are adaptive to network dynamics but are generally inefficient in heavily loaded or large networks. To take advantage of the both types of protocols, a D-CVDMA protocol is proposed. It is based on the k-round elimination contention (k-EC) scheme, which provides fast contention resolution for Wireless LANs. D-CVDMA uses a contention mechanism to achieve TDMA-like collision-free data transmissions, which does not need to reserve time slots for forthcoming transmissions. These features make the D-CVDMA robust and adaptive to network dynamics such as node leaving and joining, changes in packet size and arrival rate, which in turn make it suitable for the delivery of hybrid traffic including multimedia and data content. Analyses and simulations demonstrate that D-CVDMA outperforms the IEEE 802.11 DCF and k-EC in terms of network throughput, delay, jitter, and fairness.

Synchrophasor Broadcast over Internet Protocol for Distributed Generator Synchronization

Synchronous islanded operation involves continuously holding an islanded power network in virtual synchronism with the main power system to aid paralleling and avoid potentially damaging out-of-synchronism reclosure. This requires phase control of the generators in the island and the transmission of a reference signal from a secure location on the main power system. Global positioning system (GPS) time-synchronized phasor measurements transmitted via an Internet protocol (IP) are used for the reference signal. However, while offering low cost and a readily available solution for distribution networks, IP communications have variable latency and are susceptible to packet loss, which can make time-critical control applications difficult. This paper investigates the ability of the phase-control system to tolerate communications latency. Phasor measurement conditioning algorithms that can tolerate latency are used in the phase-control loop of a 50-kVA diesel generator. © 2010 IEEE.

Reconfigurable system-on-a-chip motion estimation architecture for multi-standard video coding

A new domain-specific, reconfigurable system-on-a-chip (SoC) architecture is proposed for video motion estimation. This has been designed to cover most of the common block-based video coding standards, including MPEG-2, MPEG-4, H.264, WMV-9 and AVS. The architecture exhibits simple control, high throughput and relatively low hardware cost when compared with existing circuits. It can also easily handle flexible search ranges without any increase in silicon area and can be configured prior to the start of the motion estimation process for a specific standard. The computational rates achieved make the circuit suitable for high-end video processing applications, such as HDTV. Silicon design studies indicate that circuits based on this approach incur only a relatively small penalty in terms of power dissipation and silicon area when compared with implementations for specific standards. Indeed, the cost/performance achieved exceeds that of existing but specific solutions and greatly exceeds that of general purpose field programmable gate array (FPGA) designs.

Lean Software Management: BBC Worldwide Case Study

This case study examines how the lean ideas behind the Toyota production system can be applied to software project management. It is a detailed investigation of the performance of a nine-person software development team employed by BBC Worldwide based in London. The data collected in 2009 involved direct observations of the development team, the kanban boards, the daily stand-up meetings, semistructured interviews with a wide variety of staff, and statistical analysis. The evidence shows that over the 12-month period, lead time to deliver software improved by 37%, consistency of delivery rose by 47%, and defects reported by customers fell 24%. The significance of this work is showing that the use of lean methods including visual management, team-based problem solving, smaller batch sizes, and statistical process control can improve software development. It also summarizes key differences between agile and lean approaches to software development. The conclusion is that the performance of the software development team was improved by adopting a lean approach. The faster delivery with a focus on creating the highest value to the customer also reduced both technical and market risks. The drawbacks are that it may not fit well with existing corporate standards.

Modelling the mechanical response of the reed-mouthpiece-lip system of a clarinet. Part II: A lumped model approximation

A non-linear lumped model of the reed-mouthpiece-lip system of a clarinet is formulated, in which the lumped parameters are derived from numerical experiments with a finite-difference simulation based on a distributed reed model. The effective stiffness per unit area is formulated as a function of the pressure signal driving the reed, in order to simulate the effects of the reed bending against the lay, and mass and damping terms are added as a first approximation to the dynamic behaviour of the reed. A discrete-time formulation is presented, and its response is compared to that of the distributed model. In addition, the lumped model is applied in the simulation of clarinet tones, enabling the analysis of the effects of using a pressure-dependent stiffness per unit area on sustained oscillations. The analysed effects and features are in qualitative agreement with players' experiences and experimental results obtained in prior studies.

A Web-Service Based Approach for Software Sharing

A Web-service based approach is presented which enables geographically dispersed users to share software resources over the Internet. A service-oriented software sharing system has been developed, which consists of shared applications, client applications and three types of services: application proxy service, proxy implementation service and application manager service. With the aids of the services, the client applications interact with the shared applications to implement a software sharing task. The approach satisfies the requirements of copyright protection and reuse of legacy codes. In this paper, the role of Web-services and the architecture of the system are presented first, followed by a case study to illustrate the approach developed.

Wavelength Dependence of Raman Enhancement from Gold Nanorod Arrays: Quantitative Experiment and Modeling of a Hot Spot Dominated System

Surface-enhanced Raman scattering (SERS) spectra from molecules adsorbed on the surface of vertically aligned gold nanorod arrays exhibit a variation in enhancement factor (EF) as a function of excitation wavelength that displays little correlation with the elastic optical properties of the surface. The key to understanding this lack of correlation and to obtaining agreement between experimental and calculated EF spectra lies with consideration of randomly distributed, sub-10 nm gaps between nanorods forming the substrate. Intense fields in these enhancement “hot spots” make a dominant contribution to the Raman scattering and have a very different spectral profile to that of the elastic optical response. Detailed modeling of the electric field enhancement at both excitation and scattering wavelengths was used to quantitatively predict both the spectral profile and the magnitude of the observed EF.

Managing Software Requirements Changes Based On Negotiation-Style Revision

For any proposed software project, when the software requirements specification has been established, requirements changes may result in not only a modification of the requirements specification but also a series of modifications of all existing artifacts during the development. Then it is necessary to provide effective and flexible requirements changes management. In this paper, we present an approach to managing requirements changes based on Booth’s negotiation-style framework for belief revision. Informally, we consider the current requirements specification as a belief set about the system-to-be. The request of requirements change is viewed as new information about the same system-to-be. Then the process of executing the requirements change is a process of revising beliefs about the system-to-be. We design a family of belief negotiation models appropriate for different processes of requirements revision, including the setting of the request of requirements change being fully accepted, the setting of the current requirements specification being fully preserved, and that of the current specification and the request of requirements change reaching a compromise. In particular, the prioritization of requirements plays an important role in reaching an agreement in each belief negotiation model designed in this paper.

Advanced educational parallel DSP system based on TMS320C25 processors

This paper describes the design, application, and evaluation of a user friendly, flexible, scalable and inexpensive Advanced Educational Parallel (AdEPar) digital signal processing (DSP) system based on TMS320C25 digital processors to implement DSP algorithms. This system will be used in the DSP laboratory by graduate students to work on advanced topics such as developing parallel DSP algorithms. The graduating senior students who have gained some experience in DSP can also use the system. The DSP laboratory has proved to be a useful tool in the hands of the instructor to teach the mathematically oriented topics of DSP that are often difficult for students to grasp. The DSP laboratory with assigned projects has greatly improved the ability of the students to understand such complex topics as the fast Fourier transform algorithm, linear and circular convolution, the theory and design of infinite impulse response (IIR) and finite impulse response (FIR) filters. The user friendly PC software support of the AdEPar system makes it easy to develop DSP programs for students. This paper gives the architecture of the AdEPar DSP system. The communication between processors and the PC-DSP processor communication are explained. The parallel debugger kernels and the restrictions of the system are described. The programming in the AdEPar is explained, and two benchmarks (parallel FFT and DES) are presented to show the system performance.

Dynamic global security-aware synthesis using System-C

A dynamic global security-aware synthesis flow using the SystemC language is presented. SystemC security models are first specified at the system or behavioural level using a library of SystemC behavioural descriptions which provide for the reuse and extension of security modules. At the core of the system is incorporated a global security-aware scheduling algorithm which allows for scheduling to a mixture of components of varying security level. The output from the scheduler is translated into annotated nets which are subsequently passed to allocation, optimisation and mapping tools for mapping into circuits. The synthesised circuits incorporate asynchronous secure power-balanced and fault-protected components. Results show that the approach offers robust implementations and efficient security/area trade-offs leading to significant improvements in turnover.

THE CHOLINERGIC, SEROTONINERGIC AND PEPTIDERGIC COMPONENTS OF THE NERVOUS-SYSTEM OF MONIEZIA-EXPANSA (CESTODA, CYCLOPHYLLIDEA)

The central (CNS) and peripheral (PNS) nervous systems of the cyclophyllidean tapeworm, Moniezia expansa, were examined for the presence of cholinergic, serotoninergic and peptidergic elements using enzyme cytochemical and immunocytochemical techniques in conjunction with light and confocal scanning laser microscopy. Cholinesterase activity and 5-hydroxytryptamine- and regulatory peptide-immunoreactivities (IRs) were localized to the nerve fibres and cell bodies of all of the major neuronal components in the CNS of the worm, including the cerebral ganglia and connecting commissure, the 10 longitudinal nerve cords and associated transverse ring commissures. Although each of the 3 systems appeared well developed and comprised a significant portion of the nervous system, the serotoninergic constituent was the most highly developed, consisting of a vast array of nerve fibres and cell bodies distributed throughout the strobila of the worm. A close association of cholinesterase reactivity and peptide-IRs was evident throughout the CNS, indicating the possible co-localization of acetylcholine and neuropeptides. Within the PNS, cholinergic activity and serotoninergic- and peptidergic-IRs occurred in the subtegumental network of nerve fibres and somatic musculature. Although all 3 neurochemical elements were present in the acetabula, they were found in different nerve fibres; only cholinergic and peptidergic cell bodies were found. The common genital opening, vagina and ootype regions of the reproductive system displayed a rich innervation of all 3 types of neuronal populations. Within the peptidergic system, immunostaining with antisera raised to the C-terminus of the neuropeptide Y superfamily of peptides and the invertebrate peptides, neuropeptide F (M. expansa) and FMRFamide was the most prevalent. Limited positive-IR for substance P and neurokinin A were also recorded in the CNS of the worm.

Modelling gas storage with compressed air energy storage in a system with large wind penetrations

Installed wind capacity in the European Union is expected to continue to increase due to renewable energy targets and obligations to reduce greenhouse gas emissions. Renewable energy sources such as wind power are variable sources of power. Energy storage technologies are useful to manage the issues associated with variable renewable energy sources and align non-dispatchable renewable energy generation with load demands. Energy storage technologies can play different roles in electric power systems and can be used in each of the steps of the electric power supply chain. Moreover, large scale energy storage systems can act as renewable energy integrators by smoothening the variability of large penetrations of wind power. Compress Air Energy Storage is one such technology. The aim of this paper is to examine the technical and economic feasibility of a combined gas storage and compressed air energy storage facility in the all-island Single Electricity Market of Northern Ireland and the Republic of Ireland in order to optimise power generation and wind power integration. This analysis is undertaken using the electricity market software PLEXOS ® for power systems by developing a model of a combined facility in 2020.