Suco de laranja e vitamina C : efeito sobre a estabilidade genômica

Existem evidências crescentes indicando a associação entre dietas ricas em frutas e vegetais e a diminuição da incidência de câncer. O suco de laranja (OJ) pode ser incluído entre os alimentos com potencial quimioprotetor e seu estudo é muito relevante pelo amplo consumo desta bebida. O OJ possui vários nutrientes e compostos bioativos com atividades antioxidante, antimutagênica, anticarcinogênica e antiaterogênica, entre outras. A vitamina C (Vit C) é um dos nutrientes mais abundantes no OJ, e o único nutriente que pode ser provido em quantidade superior à recomendação diária por uma única porção de 200 mL de OJ. A Vit C, a exemplo de outros componentes do OJ, pode ser tanto benéfica quanto maléfica para os sistemas biológicos, dependendo do contexto metabólico. Neste sentido, vários nutrientes presentes no OJ têm sido identificados como mutagênicos ou carcinogênicos, especialmente quando administrados de forma isolada. Este estudo utilizou o ensaio Cometa alcalino em sangue de camundongos (in vivo) para avaliar: 1) a genotoxicidade do OJ e da Vit C; 2) a genotoxicidade do FeSO4 e do CuSO4: 3) o efeito modulador do OJ e da Vit C sobre a genotoxicidade do FeSO4 e CuSO4, bem como do metilmetanosulfonato (MMS) e da ciclofosfamida (CP). A versão alcalina do ensaio Cometa foi utilizada para avaliar o dano no DNA em células brancas do sangue periférico de camundongos. Adicionalmente, os níveis de cobre e ferro no sangue e no fígado dos camundongos tratados com metais e OJ foram avaliados pela metodologia de PIXE (Particle-Induced X-ray Emission). Grupos com pelo menos 6 camundongos (metade de cada sexo) foram tratados por gavage com uma ou duas doses de água (controle), CP, MMS, FeSO4 ou CuSO4. OJ (0.1 mL/Kg) foi administrado tanto antes (pré-tratamento) quanto após a administração das substâncias-teste (pós-tratamento). A Vit C (1 e 30 mg/Kg) foi administrada apenas no pós-tratamento. O dano no DNA foi avaliado 24 e 48 h após o início do tratamento. Após 24 h, o OJ induziu um suave aumento no dano no DNA, enquanto a Vit C foi genotóxica (30 mg/Kg > 1 mg/Kg). O tratamento duplo com Vit C (a 0 e a 24 h) induziu uma resposta genotóxica cumulativa a 48 h, que foi mais intensa para a dose maior. O FeSO4 e o CuSO4 foram genotóxicos após 24 h, mas tiveram seu dano efetivamente reparado após 48 h do tratamento. O pré-tratamento com OJ reduziu a genotoxicidade do FeSO4 e do CuSO4 (efeito preventivo). O pós-tratamento com OJ também reduziu a genotoxicidade do CuSO4 (efeito reparador). O OJ mostrou tanto efeito preventivo quanto reparador sobre a genotoxicidade do MMS. O OJ teve apenas efeito reparador sobre a CP. Ambas doses de Vit C aumentaram os danos no DNA causados pelo FeSO4 e pelo CuSO4. Adicionalmente, os níveis de cobre e ferro no sangue e no fígado dos camundongos tratados com metais e OJ foram avaliados pela metodologia de PIXE (Particle-Induced X-ray Emission). Grupos com pelo menos 6 camundongos (metade de cada sexo) foram tratados por gavage com uma ou duas doses de água (controle), CP, MMS, FeSO4 ou CuSO4. OJ (0.1 mL/Kg) foi administrado tanto antes (pré-tratamento) quanto após a administração das substâncias-teste (pós-tratamento). A Vit C (1 e 30 mg/Kg) foi administrada apenas no pós-tratamento. O dano no DNA foi avaliado 24 e 48 h após o início do tratamento. Após 24 h, o OJ induziu um suave aumento no dano no DNA, enquanto a Vit C foi genotóxica (30 mg/Kg > 1 mg/Kg). O tratamento duplo com Vit C (a 0 e a 24 h) induziu uma resposta genotóxica cumulativa a 48 h, que foi mais intensa para a dose maior. O FeSO4 e o CuSO4 foram genotóxicos após 24 h, mas tiveram seu dano efetivamente reparado após 48 h do tratamento. O pré-tratamento com OJ reduziu a genotoxicidade do FeSO4 e do CuSO4 (efeito preventivo). O pós-tratamento com OJ também reduziu a genotoxicidade do CuSO4 (efeito reparador). O OJ mostrou tanto efeito preventivo quanto reparador sobre a genotoxicidade do MMS. O OJ teve apenas efeito reparador sobre a CP. Ambas doses de Vit C aumentaram os danos no DNA causados pelo FeSO4 e pelo CuSO4. processado e armazenado de forma a preservar o seu potencial biológico é um alimento sugerido como uma das porções de uma dieta equilibrada (contendo pelo menos 5 porções de frutas e vegetais), recomendada para uma vida saudável e longeva.

Constitucionalização de políticas públicas e emendamento constitucional no Brasil

Esta Tese investiga os temas de políticas públicas constitucionalizados e qual tem sido seu padrão de emendamento no Brasil pós-1988. Desenvolvemos uma proposta de seleção de Propostas de Emendas à Constituição (PECs) a partir do caso brasileiro, e avaliamos quais temas foram constitucionalizados, quais estão mais presentes nas Propostas e nas Emendas Constitucionais no país, e se estas distribuições têm relação entre si. Em particular, o objetivo desta tese é avaliar os diferentes padrões de constitucionalização e emendamento de diferentes temas de políticas públicas. A pesquisa cobre o período de submissão e aprovação de Propostas e Emendas de 1988 a 2010, para as PECs que tramitaram na Câmara dos Deputados

Teste de sensibilidade a bactérias a agentes microbianos

Apresenta um teste de laboratório para determinar a concentração inibitória mínima (CIM ou MIC, em inglês). Como agentes inibitórios são utilizados o sulfito de sódio e o sulfato de cobre, em cinco concentrações diferentes para cada um em uma bactéria contaminante da fermentação. É preparado o inóculo da bactéria, que é misturado ao caldo com nutrientes, água destilada e a solução do antimicrobiano, sendo uma amostra para cada concentração. É feita a leitura da absorbância inicial e, após o tempo de incubação, é feita a leitura da absorbância final. Como exercício, calcular a variação de absorbância para cada concentração. A concentração de antimicrobiano que causou a menor variação de absorbância é a concentração mínima inibitória deste antimicrobiano.

Armazenamento e recuperação da informação

O item não apresenta o texto completo, pois está passando por revisão editorial

Avaliação e valorização de recursos agrícolas: avaliação nutricional e mineral de variedades tradicionais de batata-doce (Ipomoea batatas L.) provenientes da Madeira e Açores

Este trabalho foi desenvolvido com o intuito de avaliar nutricionalmente variedades agrícolas regionais madeirenses e açorianas de Ipomoea batatas L. (batata-doce). No total 18 amostras foram analisadas, entre as quais 11 são variedades provindas da Madeira e outras 7 provindas dos Açores. O maior objectivo deste estudo foi comparar a composição nutricional e mineral de um conjunto de variedades de batata-doce, valorizando assim os recursos agrícolas da Madeira e Açores. A caracterização nutricional e mineral dos rizomas, produzidos nestas regiões, proporcionou informação relevante para a valorização destes recursos. Sendo um rizoma tropical consumido habitualmente pela população e disponível todo o ano, torna essencial a sua avaliação. A análise laboratorial dos rizomas permitiu determinar um conjunto de características nutricionais. De um modo geral, os valores nutricionais médios detectados em rizomas de batata-doce destas duas regiões são de 93,64 g/100g de MS para o resíduo seco, 3,01 g/100g de MS para cinzas, 3,19 g/100g de MS para fibra (ADF), 1,21 g/100g de MS para gordura bruta, 3,20 g/100g de MS para proteína, 14,00 g/100g de MS para açúcares solúveis e 59,72 g/100g de MS para o amido. A análise mineral incluiu a determinação de fósforo, potássio, cálcio, magnésio, ferro, cobre, zinco, manganês e boro. Na variedade “De cenoura” (ISOP 1028), foi quantificado o nível de pro-vitamina A pela técnica de HPLC, que foi verificado ser 12,48 mg/100g em MS de β-caroteno. Os dados obtidos na análise nutricional foram usados para construir uma base de dados no NIRS (Near Infra-Red Spectroscopy) de modo a construir um modelo de previsão que possa predizer o valor nutritivo de um grande número de amostras em tempo reduzido, com um mínimo de impacto ambiental. Posteriormente, os dados obtidos através das análises nutricionais e minerais foram introduzidos no software estatístico SPSS 19.0 para determinar correlações e similaridades.

Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas

ALVES, Ana paula Melo. Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas. 2009. 124 f. Tese (Doutorado em Quimica) - Centro de Ciências Exatas e da Natureza, Universidade Federal da Paraíba, João Pessoa, PB, 2009.

Polissacarídeos sulfatados da Alga Marrom Dictyopteris justii como agentes antioxidantes e inibidores da formação de cristais de oxalato de cálcio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu

Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy milling (HEM) produces composite powders with high homogeneity and refines the grain size. This work focus to study Ta-20wt%Cu composite powders prepared by mechanical mixture and HEM with two different conditions of milling in a planetary ball mill and then their sintering using hydrogen plasma furnace and a resistive vacuum furnace. After milling, the powders were pressed in a steel dye at a pressure of 200 MPa. The cylindrical samples pressed were sintered by resistive vacuum furnace at 10-4torr with a sintering temperature at 1100ºC / 60 minutes and with heat rate at 10ºC/min and were sintered by plasma furnace with sintering temperatures at 550, 660 and 800ºC without isotherm under hydrogen atmosphere with heat rate at 80ºC/min. The characterizations of the powders produced were analyzed by scanning electron microscopy (SEM), x-ray diffraction (XRD) and laser granulometry. After the sintering the samples were analyzed by SEM, XRD and density and mass loss tests. The results had shown that to high intense milling condition produced composite particles with shorter milling time and amorphization of both phases after 50 hours of milling. The composite particles can produce denser structure than mixed powders, if heated above the Cu melting point. After the Cu to arrive in the melting point, liquid copper leaves the composite particles and fills the pores

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions

Impregnação de metais em xisto retortado para uso como adsorventes

Concern with the environment has lead to an increase in the research for new adsorption techniques, low cost adsorvent materials and with high availability. Many works search the development of higher selectivity modified adsorvents. The Brazil has the second world reserve of oiled shale, because of it, the use of that reject is of great interest. This study has the goal of characterize and analyze the retorted shale, reject of the pirobetuminous shale pyrolysis, and the retorted shale modified through the humid impregnation method, wich the precursors were the metals nitrates ( Cobalt, Nickel and Copper), to the usage has adsorvent materials. The samples were characterized chemically, textually and structurally by the X ray fluorescence (XRF), BET, X ray diffraction (XRD) and scanning electronic microscopy (SEM) techniques. The impregnated samples showed a reduction in the superficial area and in the pore volume when compared with the retorted shale. Besides that, diffractions referred to the impregnated metals where observed in the XRD analysis, wich were the same metals detected in the XRF and SEM analysis. The materials showed homogeneity in it s composition. The results shows that the materials presents adequate adsorption characteristics

Síntese e caracterização de CuNb2O6 e CuNbC através de reação sólido- sólido e gás- sólido a baixa temperatura

The refractory metal carbides have proven important in the development of engineering materials due to their properties such as high hardness, high melting point, high thermal conductivity and high chemical stability. The niobium carbide presents these characteristics. The compounds of niobium impregnated with copper also have excellent dielectric and magnetic properties, and furthermore, the Cu doping increases the catalytic activity in the oxidation processes of hydrogen. This study aimed to the synthesis of nanostructured materials CuNbC and niobium and copper oxide from precursor tris(oxalate) oxiniobate ammonium hydrate through gas-solid and solid-solid reaction, respectively. Both reactions were carried out at low temperature (1000°C) and short reaction time (2 hours). The niobium carbide was produced with 5 % and 11% of copper, and the niobium oxide with 5% of copper. The materials were characterized by X-Ray Diffraction (XRD), Rietveld refinement, Scanning Electron Microscopy (SEM), X-Ray Fluorescence Spectroscopy (XRF), infrared spectroscopy (IR), thermogravimetric (TG) and differential thermal analysis (DTA , BET and particle size Laser. From the XRD analysis and Rietveld refinement of CuNbC with S = 1.23, we observed the formation of niobium carbide and metallic copper with cubic structure. For the synthesis of mixed oxide made of niobium and copper, the formation of two distinct phases was observed: CuNb2O6 and Nb2O5, although the latter was present in small amounts